Efficient transformation and regeneration of diverse cultivars of peanut (Arachis hypogaea L.) by particle bombardment into embryogenic callus produced from mature seeds

Peanut, one of the world's most important oilseed crops, has a narrow germplasm base and lacks sources of resistance to several major diseases. The species is considered recalcitrant to transformation, with few confirmed transgenic plants upon particle bombardment or Agrobacterium treatment. Reported transformation methods are limited by low efficiency, cultivar specificity, chimeric or infertile transformants, or availability of explants. Here we present a method to efficiently transform cultivars in both botanical types of peanut, by (1) particle bombardment into embryogenic callus derived from mature seeds, (2) escape-free (not stepwise) selection for hygromycin B resistance, (3) brief osmotic desiccation followed by sequential incubation on charcoal and cytokinin-containing media; resulting in efficient conversion of transformed somatic embryos into fertile, non-chimeric, transgenic plants. The method produces three to six independent transformants per bombardment of 10 cm(2) embryogenic callus. Potted, transgenic plant lines can be regenerated within 9 months of callus initiation, or 6 months after bombardment. Transgene copy number ranged from one to 20 with multiple integration sites. There was ca. 50% coexpression of hph and luc or uidA genes coprecipitated on separate plasmids. Reporter gene (luc) expression was confirmed in T-1 progeny from each of six tested independent transformants. Insufficient seeds were produced under containment conditions to determine segregation ratios. The practicality of the technique for efficient cotransformation with selected and unselected genes is demonstrated using major commercial peanut varieties in Australia (cv. NC-7, a virginia market type) and Indonesia (cv. Gajah, a spanish market type).

A comparative study of N2O conversion to N-2 over Co/AC and Cu/AC catalysts

Catalytic conversion of N2O to N-2 over Cu- and Co-impregnated activated carbon catalysts (Cu/AC and Co/AC) was investigated. Catalytic activity measurements were carried out in a fixed-bed flow reactor at atmospheric pressure. The catalysts were characterized by N-2 adsorption, X-ray diffraction (XRD) and thermogravimetric analysis (TGA). This study aimed to provide insights into the following aspects: the metal dispersion, changes in pore structure, influence of catalyst loading on reaction, and reaction mechanism. Increasing loading of Co or Cu led to decreasing dispersion, but 20 wt % loading was an upper limit for optimal activities in both cases, with too high loading causing sintering of metal. Co exhibited a relatively better dispersion than Cu. Impregnation of metal led to a large decrease in surface area and pore volume, especially for 30 wt % of loading. 20 wt % of loading has proved to be the optimum for both Cu and Co, which shows the highest activity. Both N2O-Co/AC and -Cu/AC reactions are based upon a redox mechanism, but the former is limited by the oxygen transfer from catalysts to carbon, while N2O chemisorption on the surface of Cu catalyst controls the latter. The removal of oxygen from cobalt promotes the activity of Co/AC, but it is beneficial for Cu/AC to keep plenty of oxygen to maintain the intermediate oxidation of copper-Cu1+. The different nature of the two catalysts and their catalytic reaction mechanisms are closely related to their different electronegativities.

Tuberculosis and health sector reform: experience of integrating tuberculosis services into the district health system in rural South Africa

SETTING: Hlabisa health district, South Africa. OBJECTIVE: To describe the integration of a vertical tuberculosis control programme into an emerging 'horizontal' district health system, within the context of health sector reform. DESIGN: Descriptive account of the process of integration of the programme into the health system. RESULTS: A highly 'vertical' system of delivering tuberculosis treatment (with poor programme outcomes) was converted into a (horizontal' team, integrated within the district health system, that used available resources such as village clinics and community health workers, with improved programme outcomes. CONCLUSIONS: In some settings at least, integration of tuberculosis 'programmes' into the district health system as tuberculosis 'teams' is feasible, and may produce highly cost-effective outcomes.

Incorporating phase retardation effects into radiofrequency resonator models: application to magnetic resonance microscopy

A method is presented for including path propagation effects into models of radiofrequency resonators for use in magnetic resonance imaging. The method is based on the use of Helmholtz retarded potentials and extends our previous work on current density models of resonators based on novel inverse finite Hilbert transform solutions to the requisite integral equations. Radiofrequency phase retardation effects are most pronounced at high field strengths (frequencies) as are static field perturbations due to the magnetic materials in the resonators themselves. Both of these effects are investigated and a novel resonator structure presented for use in magnetic resonance microscopy.

Cell death and immunohistochemistry of p53, c-Fos and c-Jun after spermine infection into the rat striatum

Administration of polyamines into the central nervous system results in tissue damage, possibly through the excitotoxic actions of the NMDA receptor. Direct injection of 100 nmol of spermine into the rat striatum produced a lesion equivalent to approximately 50% of the striatum. Analysis of the DNA in this region revealed the distinct ladder-like pattern of degradation often associated with apoptosis. This DNA fragmentation was confirmed in vivo using terminal deoxynucleotidyl-transferase-mediated biotinylated deoxyuridine triphosphate nick end labelling (TUNEL). The morphology of the TUNEL-positive cells showed marked differences at the needle tract when compared with cells in damaged areas away from the needle tract, suggesting a differential mechanism of cell death in these two regions. The patterns of p53, c-Fos and c-Jun protein expression were determined using immunohistochemistry. The number of p53-immunoreactive cells increased up to 14 h and returned to basal levels by 24 h. c-Fos protein expression transiently increased, peaking at 8 h after injection, c-Jun exhibited a protracted pattern of expression, remaining elevated up to 24 h. p53 protein expression was colocalised with TUNEL staining in areas away from the needle tract, but not in cells at the needle tract, suggesting once again a differential mechanism of cell death. At 14 h, c-Fos and c-Jun were not colocalised with TUNEL staining, suggesting that they are either not involved with the cell death process or that the time course of protein expression and the onset of DNA fragmentation do not overlap. This work represents the first characterisation of processes associated with cell death induced by spermine in vivo.

Reducing the harms caused by cannabis use: the policy debate in Australia

The debate about cannabis policy in Australia has revolved around the harms that cannabis causes to users and the community, on the one hand, and the harms that are caused by the prohibition of its use, on the other. This paper assesses evidence on: (1) the harms caused to users and the community by cannabis use (derived from the international scientific literature) and (2) the harms that arise from prohibition (as reflected in Australian research). The most probable harms caused by cannabis use include: an increased risk of motor vehicle accidents; respiratory disease; dependence; adverse effects on adolescent development; and the exacerbation of psychosis. The harms of the current prohibition on cannabis use policy are less tangible but probably include: the creation of a large blackmarket; disrespect for a widely broken law; harms to the reputation of the unlucky few cannabis users who are caught and prosecuted; lack of access to cannabis for medical uses; and an inefficient use of law enforcement resources. Cannabis policy unavoidably involves trade offs between competing values that should be made by the political process. Australian cannabis policy has converged on a solution which continues to prohibit cannabis but reduces the severity of penalties for cannabis use by either removing criminal penalties or diverting first time cannabis offenders into treatment and education. (C) 2001 Elsevier Science Ireland Ltd. All rights reserved.

Decompositions of complete multipartite graphs into cycles of even length

Necessary and sufficient conditions for the existence of an edge-disjoint decomposition of any complete multipartite graph into even length cycles are investigated. Necessary conditions are listed and sufficiency is shown for the cases when the cycle length is 4, 6 or 8. Further results concerning sufficiency, provided certain small decompositions exist, are also given for arbitrary even cycle lengths.

Wave-induced seepage flux into anisotropic seabeds

Considerable effort has been devoted to quantifying the wave-induced soil response in a porous seabed in the last few decades. Most previous investigations have focused on the analysis of pore pressure and effective stresses within isotropic sediments, despite strong evidence of anisotropic soil behaviour reported in the literature. Furthermore, the seepage flux, which is important in the context of contaminant transport, has not been examined. In this paper, we focus on water wave-driven seepage in anisotropic marine sediments of finite thickness. The numerical results predict that the effects of hydraulic anisotropy and anisotropic soil behaviour on the wave-driven seepage in marine sediment are significant. Copyright (C) 2001 John Wiley & Sons, Ltd.

MHCWeb: Converting a WWW database into a knowledge-based collaborative environment

The World Wide Web (WWW) is useful for distributing scientific data. Most existing web data resources organize their information either in structured flat files or relational databases with basic retrieval capabilities. For databases with one or a few simple relations, these approaches are successful, but they can be cumbersome when there is a data model involving multiple relations between complex data. We believe that knowledge-based resources offer a solution in these cases. Knowledge bases have explicit declarations of the concepts in the domain, along with the relations between them. They are usually organized hierarchically, and provide a global data model with a controlled vocabulary, We have created the OWEB architecture for building online scientific data resources using knowledge bases. OWEB provides a shell for structuring data, providing secure and shared access, and creating computational modules for processing and displaying data. In this paper, we describe the translation of the online immunological database MHCPEP into an OWEB system called MHCWeb. This effort involved building a conceptual model for the data, creating a controlled terminology for the legal values for different types of data, and then translating the original data into the new structure. The 0 WEB environment allows for flexible access to the data by both users and computer programs.

Sex pheromone biosynthesis in the female olive fruit-fly. Double labelling from [O-18(2)]-dioxygen into 1,7-dioxaspiro[5.5]undecane

The demonstration that both oxygen atoms of 1,7-dioxaspiro[5.5] undecane (1), the sex-pheromone of the female olive fly, originate from dioxygen, strongly implicates monooxygenase mediated processes in assembly of (1), and reveals unexpected complexity in the formation of its nine-carbon precursor.

Scope for further analytical solutions for constant flux infiltration into a semi-infinite soil profile or redistribution in a finite soil profile

[1] We attempt to generate new solutions for the moisture content form of the one-dimensional Richards' [1931] equation using the Lisle [1992] equivalence mapping. This mapping is used as no more general set of transformations exists for mapping the one-dimensional Richards' equation into itself. Starting from a given solution, the mapping has the potential to generate an infinite number of new solutions for a series of nonlinear diffusivity and hydraulic conductivity functions. We first seek new analytical solutions satisfying Richards' equation subject to a constant flux surface boundary condition for a semi-infinite dry soil, starting with the Burgers model. The first iteration produces an existing solution, while subsequent iterations are shown to endlessly reproduce this same solution. Next, we briefly consider the problem of redistribution in a finite-length soil. In this case, Lisle's equivalence mapping is generalized to account for arbitrary initial conditions. As was the case for infiltration, however, it is found that new analytical solutions are not generated using the equivalence mapping, although existing solutions are recovered.

Incorporation of bovine dry blood plasma into biscuit flour for the production of pasta

Spray-dried blood plasma (DBP) (10.9 g/100 g [w/w] nitrogen) was added to medium-protein biscuit flour (1.4 g/100 g N) during pasta manufacture. High-protein durum semolina (2.0 g/100 g N) Was used to produce the control pasta. Sensory data indicated that the addition of DBP produced pasta with significantly better colour intensity and acceptability. aroma intensity, flaN our intensity. textural strength, texture acceptability, aftertaste intensity, aftertaste acceptability. and overall acceptability The DBP/biscuit flour formulation that gave the optimum balance between pasta protein content and organoleptic acceptability contained 2.2 g/100 g DBP. A higher content of DBP resulted in increased protein levels, but these pasta formulations, ere less acceptable organoleptically. (C) 2002 Swiss Society of Food Science and Technology. Published by Elsevier Science Ltd. All rights reserved.

Neighborhood and Efficiency in Manufacturing in Brazilian Regions: A Spatial Markov Chain Analysis

This paper analyzes the geography of regional competitiveness in manufacturing in Brazil. The authors estimate stochastic frontiers to calculate regional efficiency of representative firms in 137 regions in the period 2000-2006, in four sectors defined by technological intensity. The efficiency results are analyzed using Markov Spatial Transition Matrices to provide insights into the transition of regions between efficiency levels, considering their local spatial context. The results indicate that geography plays an important role in manufacturing competitiveness. In particular, regions with more competitive neighbors are more likely to improve their relative efficiency (pull effect) over time, and regions with less competitive neighbors are more likely to lose relative efficiency (drag effect). The authors find that the pull effect is stronger than the drag effect.