Umedecimento do substrato e temperatura na germinação e vigor de sementes de melão

The study was conducted to evaluate the efficacy of herbicides in desiccation Raphanus raphanistrum (wild radish) in different application times and their effects on weed seed germination. The experimental had a randomized block design with three replications. The herbicides used were: glyphosate (360; 720; and 1080 g ha(-1)), 2,4-D (335; 670; and 1005 g ha(-1)), glyphosate + 2,4-D (360 + 335; 720 + 670; and 1080 + 1005 g ha(-1)). Spraying was conducted at three different times: 1st season (full bloom) - at 62 days after emergence (DAE), 2nd season (beginning of pod formation) - at 92 DAE and 3rd season (end of pod formation) - at 108 DAE. At 14, 21, 28, 35, and 42 days after application (DAA), the desiccation was evaluated visually, and 42 DAA dry mass of shoots and seeds of the 2nd and 3rd times were collected for the test of germination. All chemical treatments tested were effective in controlling the plants of wild radish in the 1st and 2nd times, but in the 3rd time doses of 2,4-D applied singly were not effective and only the highest dose of glyphosate applied singly or in mixture provided a total plant control. In terms of percentage, the reduction in dry matter of plants was higher with the application of larger doses of chemical treatments. The herbicides affected the germination of seeds of wild radish, and the herbicide 2,4-D provided greater reduction in germination in the 2nd and 3rd seasons.

ASIAN SOYBEAN RUST INTEGRATED MANAGEMENT POTENTIAL: DISEASE SEVERITY, PLANT DEVELOPMENT AND YIELD COMPONENTS, CULTIVAR MG/BR-46 (CONQUISTA)

Soybean rust caused by Phakopsora pachyrhizi Sydow & P. Sydow is one of the major diseases of the soybean crop. The aim of this study was to evaluate the effects of sowing dates, plant populations and reduced doses of fungicides on soybean rust severity and its effects on plant development and yield, cultivar MG/BR46 (Conquista). Field experiments were conducted in the 2009/2010 and 2010/2011 harvests, under natural rust infestation of soybean rust. As from the appearance of the first disease symptoms, also began the fungicide spraying and the disease severity assessments. To understand the nature and extent of the effects of different treatments, a multivariate analysis of factors was applied. For the majority of the agronomic characters and factors, one-third to two-thirds of their variability can be explained by changes in plant populations or by differences in the fungicide treatments, and the remainder, was explained by sowing date variations. The fungicide treatments and sowing dates are determinants in disease severity and its interference on crop productivity. The characters of plant growth are more dependent on plant population variations. Treatments with azoxystrobina + ciproconazol promoted smaller disease severities, reflecting in productivity increase. The plant populations can be reduced up to 160.000 plants ha(-1) without losses in the disease control and the soybean yield. In general, the earliest sowings provided increase in the plant development, although the rust control was less efficient.

FLUXOFENIM USED AS A SAFENER ON SORGHUM SEED FOR S-METOLACHLOR HERBICIDE

This study aimed to evaluate the efficiency of protective fluxofenim seed treatment of sorghum hybrids DKB510 and SCG340, in order to increase the selectivity to the herbicide S-metolachlor applied pre-emergence and to determine the activity of detoxification enzyme glutathione S-transferase (GST). This work was divided into two stages. The first step consisted of field evaluation of the effectiveness of the shield to reduce visual symptoms of plant injury caused by the herbicide and the second determined the activity of GST. It was compared the susceptibility of sorghum seeds to the herbicide by means of visual assessment of injuries at 3, 7, 15 and 30 days after emergence (DAE), root dry weight and shoot at 10 DAE, and determination of activity GST. The treatments were: application of the safener dose at 0 and 40 mL per 100 kg of seed, and spraying of the herbicide S-metolachlor at rates of 1,440 and 2,880 g a.i. ha(-1), and a control without herbicide. The safener use to seed treatment for both sorghum hybrids (DKB510 and SCG340) increased tolerance to the herbicide S-metolachlor in two doses, and the best results were obtained at a dose of 1,440 g ha(-1). The GST enzyme activity showed an increase when using the fluxofenim prior to application of the herbicide S-metolachlor at a dose of 1,440 g ha(-1) for the two hybrids.

INFLUENCE OF NOZZLE TYPE AND SPRAY RATES ON CORN AND WEED PLANTS DROP DEPOSITIONS

The objective of this study was to evaluate different nozzles and spray rates on drop deposition in corn (Zea mays), Euphorbia heterophylla and Brachiaria plantaginea, both weeds located at and between crop rows. The experimental design established was complete random blocks with treatments arranged at 2 x 2 factorial scheme (2 nozzles types: DG11002VS flat flan and medium droplets, TXVK08 cone and very fine droplets; and 2 rates: 100 and 200 L ha(-1)) with four replications. The spray applications occurred at 13 days after corn germination (3-5 expanded leaves), when E. heterophylla and B. plantaginea plants had 2-4 and 2-3 leaves, respectively. Solution of Brilliant Blue (FD&C-1) dye at 3,000 ppm was used as spray tracer. It was concluded that the greatest average deposits in corn plants was provided by TXVK08, independently of the spray rates used. The most uniform deposits occurred when the spray rates of 200 L ha(-1) was used. Spray deposits were most uniform in B. plantaginea compared to E. heterophylla when both weds were located at crop row, independently of nozzle or spray rates. However, the DG 11002VS spray nozzle provided the most uniform drop deposition on B. plantaginea located between the rows, while the most efficient deposition over E. heterophylla located between rows was TXVK08.

Síntese de microesferas de quitosana para aplicação em liberação controlada de drogas pelo método de atomização e coagulação

Chitosan is a natural biodegradable polymer with great potential for pharmaceutical applications due to its biocompatibility, high charge density , nontoxicity and mucoadhesion. Gel formation can be obtained by the interactions of chitosans with low molecular counterions such as polyphosphates, sulphates and crosslinking with glutaraldehyde. This gelling property of chitosan allows a wide range of applications such as coating of pharmaceuticals and food products, gel entrapment of biochemicals, whole cells, microorganisms and algae. One of its main applications is the synthesis of microspheres for coating of pharmaceuticals , magnetic particles an other substances. In such a way, we can build targeted drug delivery systems. In the present work, we applied the method of spraying and coagulation. The resulting microspheres, then, were characterized by optical microscopy

Distribuição de tensões em bocais de vasos de pressão

This work is to analyze the behavior of context concentrated stresses generated around a nozzle connected to a pressure vessel. For this analysis we used the finite element method via a computer interface, the software ANSYS WORKBENCH. It was first necessary to study and intensive training of the software used, and also a study of the ASME Code, Section VIII, which is responsible for the standards used in pressure vessels. We analyzed three cases, which differ primarily in the variation of the diameter of the nozzle in order to analyze the variation of the stresses according to the variation of the diameters. The nozzle diameters were 35, 75 and 105 mm. After the model designed vessel, a pressure was applied on the innervessel of 0.5 MPa. For the smallest diameter, was found the lowest tensions concentrated. Varying between 1 and 223 MPa. Increasing the diameter of the nozzle resulted in increased tensions concentrated around the junction nozzle /vessel. The maximum stresses increased by 78% when the value was increased in diameter from 35 to 75 mm. Since the increase in diameter from 75 to 105 mm, the values of the tensions increased around 43%. These figures emphasize that stress concentrations increased with increasing the diameter of the nozzles, but not linearly

Caracterização hidráulica do aspersor Super 10 e sua influência na energia cinética e erosividade

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Influência do etil-trinexapac no crescimento inicial do eucalipto

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Controle quimioterápico da mosca Stomoxys calcitrans (Insecta: Muscidae)

Pós-graduação em Medicina Veterinária - FCAV

Aplicação de produtos fitossanitários na cultura dos citros utilizando pulverizador envolvente

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Efeito Pesticida de Ésteres de Sacarose Sobre Calacarus heveae Feres (Acari: Eriophyidae) em Dois Clones de Seringueira

Sucrose esters are biodegradable, non pollutant and safe for health; moreover, they have shown great potential in the pest control. We tested a crude mix of sucrose esters on the survivorship and oviposition of Calacarus heveae Feres (Acari: Eriophyidae) females, an important rubber tree pest mite. The females were collected from rubber leaflets of the GT 1 and RRIM 600 clones. The mites were kept on stock arenas placed in rearing chamber at 28 + 0,1°C, 80 + 10% of relative humidity and 12h of light phase about two weeks before the assays. After this period, the mites were transferred to assay arenas made with leaflets from the same clone of stock arenas. The survivorship of females sprayed with sucrose esters in the concentrations of 1, 2, 3 and 4 g/L and their oviposition effect with 0.5 and 1 g/L were analyzed. The mites sprayed with 4 g/L had about 80% of mortality, while those with 1 g/L around 60%. All mites that died in the treatments with sucrose ester became dark with wrinkled tegument and decreased their body volume, suggesting dehydration. We also observed the efficacy of 1 g/L concentration to decrease the female oviposition in about 50%, in the third day after spraying. No differences were observed in the mortality and oviposition between females kept on both clones.

Efeito da aspersão de água sobre a contaminação microbiológica em esteiras transportadoras de cortes de frango

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Hormesis de glyphosate em cana-de-açúcar

Pós-graduação em Agronomia (Agricultura) - FCA

Dinâmica do nitrogênio em sistemas de produção sob semeadura direta

Pós-graduação em Agronomia (Agricultura) - FCA

Avaliação da deposição e da agitação de calda em reservatórios de pulverizadores agrícolas utilizando uma análise numérica (CFD) e experimental

Pós-graduação em Engenharia Mecânica - FEB