Efeito agudo do exercício físico associado a praxias ideomotoras sobre as concentrações séricas de cortisol e memória declarativa em indivíduos com idade entre 51 e 74 anos

Introduction: Several modifications are identified as aging, causing more or less limitation imposed by over the years. Among these, one can highlight the different degrees of cognitive decline, particularly memory that can involve the daily activities and the subject functionality. Studies have shown an association between levels of serum cortisol and stress imposed by the exercise on this. However, there are few studies that references the performance on cognitive aspects of declarative memory and cortisol on the exercise in the water with automatic and práxicos movements and moderate. Objective: Check the effect based on the acute physical exercise and práxicos automatic movements on the performance of visual declarative memory and in serum cortisol in subjects aged between 51 and 74 years. Materials and Methods: It builds a survey characterized as cross with a first sample of 32 physically active subjects aged between 51 and 74 years, divided into two exercise groups (March of Automatic Group - MAG and the March of Praxis Group - MPG). We used a probabilistic and random sampling for sample selection. Used the MMSE (Mini Mental State Examination) to check the general cognitive status, visual acuity test - optotypes chart "E" Rasquin and was even used the declarative visual memory test proposed by Nitrini and collaborators (1994), applying before motor stimulation and immediately after, and the day of blood collection with 2 ml for analysis of cortisol hormone. The normality and homogeneity were verified from the Shapiro-Wilk and Levene tests. Thus we adopted a descriptive statistics to characterize the sample. The Split-Plot ANOVA was used along with the paired t-test to verify the identified differences. We adopted a significance level of p <0.05. Results: It was observed that the groups (MAG and MPG) and the anthropometric variables, perceived exertion, education, cognitive assessment and visual acuity showed no significant differences (p > 0.05), showing that the groups are homogeneous, with variables and similar means. After the stimulation session, lasting 30 min, it was observed that the amount of hits for Δ of declarative memory questionnaire visual images increased, presenting significant for both groups (MAG, p < 0.001; MPG, p = 0.042). The same was observed for cortisol concentration with a reduction in the levels immediately after the stimulus (MAG and MPG, p < 0.001). Conclusion: The results showed that the exercises proposed in its acute effect provide significantly memories of gains and also showed a reduction in cortisol levels.

Avaliação comparativa da remodelação óssea periimplantar em implantes com junção cone-morse e hexágono externo: estudo clínico randomizado controlado, duplo cego, boca dividida

Background: Several theories, such as the biological width formation, the inflammatory reactions due to the implant-abutment microgap contamination, and the periimplant stress/strain concentration causing bone microdamage accumulation, have been suggested to explain early periimplant bone loss. However, it is yet not well understood to which extent the implant-abutment connection type may influence the remodeling process around dental implants. Aim: to evaluate clinical, bacteriological, and biomechanical parameters related to periimplant bone loss at the crestal region, comparing external hexagon (EH) and Morse-taper (MT) connections. Materials and methods: Twelve patients with totally edentulous mandibles received four custom made Ø 3.8 x 13 mm implants in the interforaminal region of the mandible, with the same design, but different prosthetic connections (two of them EH or MT, randomly placed based on a split-mouth design), and a immediate implant- supported prosthesis. Clinical parameters (periimplant probing pocket depth, modified gingival index and mucosal thickness) were evaluated at 6 sites around the implants, at a 12 month follow-up. The distance from the top of the implant to the first bone-to-implant contact – IT-FBIC was evaluated on standardized digital peri-apical radiographs acquired at 1, 3, 6 and 12 months follow-up. Samples of the subgingival microbiota were collected 1, 3 and 6 months after implant loading. DNA were extracted and used for the quantification of Tanerella forsythia, Porphyromonas gingivalis, Aggragatibacter actinomycetemcomitans, Prevotella intermedia and Fusobacterium nucleatum. Comparison among multiple periods of observation were performed using repeated-measures Analysis of Variance (ANOVA), followed by a Tukey post-hoc test, while two-period based comparisons were made using paired t- test. Further, 36 computer-tomographic based finite element (FE) models were accomplished, simulating each patient in 3 loading conditions. The results for the peak EQV strain in periimplant bone were interpreted by means of a general linear model (ANOVA). Results: The variation in periimplant bone loss assessed by means of radiographs was significantly different between the connection types (P<0.001). Mean IT-FBIC was 1.17±0.44 mm for EH, and 0.17±0.54 mm for MT, considering all evaluated time periods. All clinical parameters presented not significant differences. No significant microbiological differences could be observed between both connection types. Most of the collected samples had very few pathogens, meaning that these regions were healthy from a microbiological point of view. In FE analysis, a significantly higher peak of EQV strain (P=0.005) was found for EH (mean 3438.65 µ∑) compared to MT (mean 840.98 µ∑) connection. Conclusions: Varying implant-abutment connection type will result in diverse periimplant bone remodeling, regardless of clinical and microbiological conditions. This fact is more likely attributed to the singular loading transmission through different implant-abutment connections to the periimplant bone. The present findings suggest that Morse-taper connection is more efficient to prevent periimplant bone loss, compared to an external hexagon connection.

Adhesives for fixed orthodontic bands

Background: Orthodontic treatment involves using fixed or removable appliances (dental braces) to correct the positions of teeth. It has been shown that the quality of treatment result obtained with fixed appliances is much better than with removable appliances. Fixed appliances are, therefore, favoured by most orthodontists for treatment. The success of a fixed orthodontic appliance depends on the metal attachments (brackets and bands) being attached securely to the teeth so that they do not become loose during treatment. Brackets are usually attached to the front and side teeth, whereas bands (metal rings that go round the teeth) are more commonly used on the back teeth (molars). A number of adhesives are available to attach bands to teeth and it is important to understand which group of adhesives bond most reliably, as well as reducing or preventing dental decay during the treatment period. :Objectives: To evaluate the effectiveness of the adhesives used to attach bands to teeth during fixed appliance treatment, in terms of: (1) how often the bands come off during treatment; and (2) whether they protect the banded teeth against decay during fixed appliance treatment. Search methods: The following electronic databases were searched: Cochrane Oral Health's Trials Register (searched 2 June 2016), Cochrane Central Register of Controlled Trials (CENTRAL; 2016, Issue 5) in the Cochrane Library (searched 2 June 2016), MEDLINE Ovid (1946 to 2 June 2016) and EMBASE Ovid (1980 to 2 June 2016). We searched ClinicalTrials.gov and the World Health Organization International Clinical Trials Registry Platform for ongoing trials. No restrictions were placed on the language or date of publication when searching the electronic databases. Selection criteria: Randomised and controlled clinical trials (RCTs and CCTs) (including split-mouth studies) of adhesives used to attach orthodontic bands to molar teeth were selected. Patients with full arch fixed orthodontic appliance(s) who had bands attached to molars were included. Data collection and analysis: All review authors were involved in study selection, validity assessment and data extraction without blinding to the authors, adhesives used or results obtained. All disagreements were resolved by discussion. Main results: Five RCTs and three CCTs were identified as meeting the review's inclusion criteria. All the included trials were of split-mouth design. Four trials compared chemically cured zinc phosphate and chemically cured glass ionomer; three trials compared chemically cured glass ionomer cement with light cured compomer; one trial compared chemically cured glass ionomer with a chemically cured glass phosphonate. Data analysis was often inappropriate within the studies meeting the inclusion criteria. Authors' conclusions: There is insufficient high quality evidence with regard to the most effective adhesive for attaching orthodontic bands to molar teeth. Further RCTs are required.

Design of an Edge -coupled dual -ring Split-ring resonator

Electric permittivity and magnetic permeability control electromagnetic wave propagation th rough materials. I n naturally occu rring materials, these are positive. Artificial materials exhi b iting negative material properties have been reported : they are referred to as metamaterials. This paper concentrates on a ring-type split-ring resonator (SRR) exhibiting negative magnetic permeability. The design and synthesis of the SRR using the genetic-algorithm approach is explained in detail. A user-friendly g raphical user i nterface (G U I ) for an SRR optim izer and estimator using MATLAB TM is also presented

DESIGN AND TEST OF A 7-T SPLIT-PAIR MAGNET FOR MAGNETIC SEPARATION

A 160 mm bore, 7 T split-pair magnet was constructed and tested aiming to mineral processing through HGMS (high gradient magnetic separation) or HCMS (helical channel magnetic separation.) This work describes the design and test results of the pair of coils operating under current in parallel mode. In the case of antiparallel current mode large repulsive force between coils is generated and a strong magnetic field gradient outside the magnet is created. A continuous magnetic separation system made with a helical channel magnetic separator for application in TiO2 processing is analysed.

Design parameters for continuously variable power-split transmissions using planetaries with 3 active shafts

Since 1996, when the first agricultural tractor with CVT transmission was shown, the presence of this type of transmissions has been increasing. All companies offer them in their products range. Nevertheless, there is little technical documentation that explains the basics of its operation. This report shows all types of CVT transmissions: non-power-split type and power-split ones, as well as the three types used in agricultural tractors, hydro-mechanical power-split transmissions (3 active shafts, input coupled planetary; 3 active shafts, output coupled planetary and 4 active shafts). The report also describes the design parameters of a type of CVT transmission, which use a power-split system with 3 active shafts as well as the fundamental relations among them. Crown Copyright 2010 Published by Elsevier Ltd. on behalf of ISTVS. All rights reserved.

Design and analysis of a 2-DoF split-stator induction motor

A two degrees of freedom (2-DOF) actuator capable of producing linear translation, rotary motion, or helical motion would be a desirable asset to the fields of machine tools, robotics, and various apparatuses. In this paper, a novel 2-DOF split-stator induction motor was proposed and electromagnetic structure pa- rameters of the motor were designed and optimized. The feature of the direct-drive 2-DOF induction motor lies in its solid mover ar- rangement. In order to study the complex distribution of the eddy current field on the ferromagnetic cylinder mover and the motor’s operating characteristics, the mathematical model of the proposed motor was established, and characteristics of the motor were ana- lyzed by adopting the permeation depth method (PDM) and finite element method (FEM). The analytical and numerical results from motor simulation clearly show a correlation between the PDM and FEM models. This may be considered as a fair justification for the proposed machine and design tools.

Economic viability of doses and split-applications of nitrogen fertilization in corn crop in a eutrophic Red Latosol

Nitrogen is the nutrient that is most absorbed by the corn crop, with the most complex management, and has the highest share on the cost of corn production. The objective of this work was to evaluate the economic viability of different rates and split-applications of nitrogen fertilization, as such as urea, in the corn crop in a eutrophic Red Latosol (Oxisol). The study was carried out in the Experimental Station of the Regional Pole of the Sao Paulo Northwest Agribusiness Development (APTA), in Votuporanga, State of Sao Paulo, Brazil. The experimental design was randomized complete blocks with nine treatments and four replications, consisting of five N rates: 0, 55, 95, 135 and 175 kg ha(-1), 15 kg ha-l applied in the seeding and the remainder in top dressing: 40 and 80 kg ha(-1) N at forty days after seeding (DAS), or 1/2 + 1/2 at 20 and 40 DAS; 120 kg ha-1 N split in 1/2 + 1/2 or 1/3 + 1/3 + 1/3 at 20, 40 or 60 DAS; 160 kg ha(-1) N split in 1/4 + 3/8 + 3/8 or 114 + 1/4 + 1/4 + 1/4 at 20, 40, 60 and 80 DAS. The application of 135 kg ha-l of N split in three times provided the best benefit/cost ratio. The non-application of N provided the lowest economic return, proving to be unviable.

Caries-preventive Efficacy and Retention of a Resin-modified Glass lonomer Cement and a Resin-based Fissure Sealant: A 3-year Split-mouth Randomised Clinical Trial

Purpose: This prospective clinical trial compared the retention rate and caries-preventive efficacy of two types of sealant modalities over a 3-year period. Materials and Methods: Using a split-mouth randomised design, 1280 sealants were randomly applied on sound permanent second molars of 320 young patients aged between 12 and 16 years. Half of the teeth (n = 640) were sealed with a resin-modified glass ionomer cement (RMGIC) (Vitremer (TM), 3M ESPE) and the other half (n = 640) with a conventional light-cure, resin-based fissure sealant (LCRB) (Fluoroshield (R), Dentsply Caulk). Teeth were evaluated at baseline, 6-, 12-, 18-, 24-, 30- and 36-month intervals with regard to retention and new caries development. Results: On the sealed occlusal surfaces after 3 years, 5.10% of RMGIC and 91.08% of LCRB sealants were totally intact and 6.37% of RMGIC and 7.65% of LCRB sealants were partially intact. New caries lesions were found in 20.06% of RMGIC sealed occlusal surfaces, compared to 8.91% for LCRB sealants. Conclusions: The findings of the present clinical study suggest that RMGIC should be used only as a transitional sealant that can be applied to newly erupting teeth throughout the eruptive process, whereas LCRB sealants are used to successfully prevent occlusal caries lesions once an effective rubber dam can be achieved. It can be concluded that there are differences between the RMGIC and LCRB sealants over a 3-year period in terms of the retention rate and caries-preventive efficacy. RMGIC can serve as a simple and economic sealing solution, however provisional. Due to its poor retention rate, periodic recalls are necessary, even after 6 months, to eventually replace the lost sealant.

Effect of framework design on crown failure

This study evaluated the effect of core-design modification on the characteristic strength and failure modes of glass-infiltrated alumina (In-Ceram) (ICA) compared with porcelain fused to metal (PFM). Premolar crowns of a standard design (PFMs and ICAs) or with a modified framework design (PFMm and ICAm) were fabricated, cemented on dies, and loaded until failure. The crowns were loaded at 0.5 mm min(-1) using a 6.25 mm tungsten-carbide ball at the central fossa. Fracture load values were recorded and fracture analysis of representative samples were evaluated using scanning electron microscopy. Probability Weibull curves with two-sided 90% confidence limits were calculated for each group and a contour plot of the characteristic strength was obtained. Design modification showed an increase in the characteristic strength of the PFMm and ICAm groups, with PFM groups showing higher characteristic strength than ICA groups. The PFMm group showed the highest characteristic strength among all groups. Fracture modes of PFMs and of PFMm frequently reached the core interface at the lingual cusp, whereas ICA exhibited bulk fracture through the alumina core. Core-design modification significantly improved the characteristic strength for PFM and for ICA. The PFM groups demonstrated higher characteristic strength than both ICA groups combined.

Crescimento, produção e rendimento dos clones da variedade ‘Conilon Vitória’ em condições de déficit hídrico e irrigado

O Estado do Espírito Santo é o maior produtor de grãos de café conilon do Brasil. Devido aos trabalhos na seleção de plantas produtivas, os avanços na produtividade desta cultura são mais pronunciados com a utilização da técnica da irrigação. A utilização da irrigação na cafeicultura possibilita a adoção de novas tecnologias de plantio, expansão da área produtiva, uniformização da produção diminuindo os grãos chochos e mal granados, além de mitigar os problemas da deficiência hídrica nos períodos críticos da cultura. Diante do exposto, objetivou-se com este estudo, avaliar o crescimento, a produção e o rendimento dos treze clones da variedade de café ‘Conilon Vitória’, em condições de déficit hídrico e irrigado. O experimento foi instalado no ano de 2010 no Instituto Federal do Espírito Santo, Campus Alegre, em esquema de parcelas subdivididas 3 x 13, sendo nas parcelas o manejo de irrigação em três níveis (irrigado, irrigado com déficit hídrico de 50% e sem irrigação) e nas subparcelas os clones da variedade ‘Conilon Vitória’ em treze níveis, em um delineamento em blocos casualizados, com três repetições. Cada parcela experimental foi constituída por cinco plantas úteis. O manejo da irrigação adotado foi via clima, onde a ETo foi estimada por meio da equação de Hargreaves e Samani (1985). Os dados foram submetidos à análise de variância e as médias comparadas pelo teste de Tukey para comparações entre o fator manejo e Scott-Knott para comparações entre o fator clone. O crescimento dos ramos das plantas foi diferenciado em relação ao manejo de irrigação aplicado. Plantas sem irrigação apresentaram maiores picos de crescimento. Plantas irrigadas apresentaram menores picos de crescimento dos ramos, porém, com maior período de crescimento. A produtividade média de plantas irrigadas foi cerca de 474,5% superior a plantas sem irrigação. A produtividade média de plantas irrigadas com déficit hídrico de 50% foi cerca de 329,6 % superior a plantas sem irrigação. O rendimento entre plantas irrigadas e irrigadas com déficit hídrico de 50% não diferiu. Já plantas sem irrigação apresentaram menor rendimento em todos os clones. A irrigação influenciou no tamanho dos grãos, plantas irrigadas apresentaram maiores percentagens de grãos retidos em peneiras 13 e superiores. Já plantas sem irrigação apresentaram maiores percentagens de grãos retidos na fundagem.

Crescimento, produção e rendimento dos clones da variedade ‘Conilon Vitória’ em condições de déficit hídrico e irrigado

O Estado do Espírito Santo é o maior produtor de grãos de café conilon do Brasil. Devido aos trabalhos na seleção de plantas produtivas, os avanços na produtividade desta cultura são mais pronunciados com a utilização da técnica da irrigação. A utilização da irrigação na cafeicultura possibilita a adoção de novas tecnologias de plantio, expansão da área produtiva, uniformização da produção diminuindo os grãos chochos e mal granados, além de mitigar os problemas da deficiência hídrica nos períodos críticos da cultura. Diante do exposto, objetivou-se com este estudo, avaliar o crescimento, a produção e o rendimento dos treze clones da variedade de café ‘Conilon Vitória’, em condições de déficit hídrico e irrigado. O experimento foi instalado no ano de 2010 no Instituto Federal do Espírito Santo, Campus Alegre, em esquema de parcelas subdivididas 3 x 13, sendo nas parcelas o manejo de irrigação em três níveis (irrigado, irrigado com déficit hídrico de 50% e sem irrigação) e nas subparcelas os clones da variedade ‘Conilon Vitória’ em treze níveis, em um delineamento em blocos casualizados, com três repetições. Cada parcela experimental foi constituída por cinco plantas úteis. O manejo da irrigação adotado foi via clima, onde a ETo foi estimada por meio da equação de Hargreaves e Samani (1985). Os dados foram submetidos à análise de variância e as médias comparadas pelo teste de Tukey para comparações entre o fator manejo e Scott-Knott para comparações entre o fator clone. O crescimento dos ramos das plantas foi diferenciado em relação ao manejo de irrigação aplicado. Plantas sem irrigação apresentaram maiores picos de crescimento. Plantas irrigadas apresentaram menores picos de crescimento dos ramos, porém, com maior período de crescimento. A produtividade média de plantas irrigadas foi cerca de 474,5% superior a plantas sem irrigação. A produtividade média de plantas irrigadas com déficit hídrico de 50% foi cerca de 329,6 % superior a plantas sem irrigação. O rendimento entre plantas irrigadas e irrigadas com déficit hídrico de 50% não diferiu. Já plantas sem irrigação apresentaram menor rendimento em todos os clones. A irrigação influenciou no tamanho dos grãos, plantas irrigadas apresentaram maiores percentagens de grãos retidos em peneiras 13 e superiores. Já plantas sem irrigação apresentaram maiores percentagens de grãos retidos na fundagem.

Urease inhibitor (NBPT) and efficiency of single or split application of urea in wheat crop

NBPT (N-(n-butyl) thiophosphoric triamide), a urease inhibitor, has been reported as one of the most promising compounds to maximize urea nitrogen use in agricultural systems. The objective of this study was to evaluate the performance of irrigated wheat fertilized with urea or urea + NBPT as single or split application. The experiment was conducted from June to October 2006 in Viçosa, MG, Brazil. The experimental design followed a 2×2 factorial scheme, in which urea or urea + NBPT were combined with two modes of application: full dose at sowing (60kg ha-1) or split (20kg ha-1 at sowing + 40kg ha-1 as topdressing at tillering), in randomized blocks with ten replications. The split application of nitrogen fertilization does not improve the yield wheat under used conditions. The use of urease inhibitor improves the grain yield of wheat crop when urea is applied in topdressing at tillering, but its use does not promote difference when urea is applied in the furrow at planting.

Plot Suite

Una Plot Suite és una aplicació web que permet localitzar plots d’una Base de Dades a partir de formularis. S’obtindran taules on apareixeran els plots amb les seves característiques i es podrà obtenir còpies dels plots sol·licitats. Gràcies al seu disseny es podran afegir nous plots a la Base de Dades i fins i tot modificar l’estructura d’una manera molt intuïtiva.

Radial forearm free flap donor site morbidity: ulnar-based transposition flap vs split-thickness skin graft.

OBJECTIVES: To evaluate morbidity associated with the radial forearm free flap donor site and to compare functional and aesthetic outcomes of ulnar-based transposition flap (UBTF) vs split-thickness skin graft (STSG) closure of the donor site.¦DESIGN: Case-control study.¦SETTING: Tertiary care institution.¦PATIENTS: The inclusion criteria were flap size not exceeding 30 cm(2), patient availability for a single follow-up visit, and performance of surgery at least 6 months previously. Forty-four patients were included in the study and were reviewed. Twenty-two patients had UBTF closure, and 22 had STSG closure.¦MAIN OUTCOME MEASURES: Variables analyzed included wrist mobility, Michigan Hand Outcomes Questionnaire scores, pinch and grip strength (using a dynamometer), and hand sensitivity (using monofilament testing over the radial nerve distribution). In analyses of operated arms vs nonoperated arms, variables obtained only for the operated arms included Vancouver Scar Scale scores and visual analog scale scores for Aesthetics and Overall Arm Function.¦RESULTS: The mean (SD) wrist extension was significantly better in the UBTF group (56.0° [10.4°] for nonoperated arms and 62.0° [9.7°] for operated arms) than in the STSG group (59.0° [7.1°] for nonoperated arms and 58.4° [12.1°] for operated arms) (P = .02). The improvement in wrist range of motion for the UBTF group approached statistical significance (P = .07). All other variables (Michigan Hand Outcomes Questionnaire scores, pinch and grip strength, hand sensitivity, and visual analog scale scores) were significantly better for nonoperated arms vs operated arms, but no significant differences were observed between the UBTF and STSG groups.¦CONCLUSIONS: The radial forearm free flap donor site carries significant morbidity. Donor site UBTF closure was associated with improved wrist extension and represents an alternative method of closure for small donor site defects.