Carcass and meat traits of lambs fed by-products from the processing of oil seeds

We evaluated the effect of adding by-products from the processing of oil seeds in the diet of lambs on the carcass and meat traits. Twenty-four non-castrated weaned male Santa Inês lambs with approximately 70 days of age and initial average weight of 19.11 ± 2.12 kg were distributed into a completely randomized design. Treatments consisted of diets containing by-products with 70% of concentrate and 30% of tifton hay (Cynodon spp.) and were termed SM: control with soybean meal; SC: formulated with soybean cake; SUC: formulated with sunflower cake and PC: formulated with peanut cake. Diets had no effects on the carcass traits evaluated. There was no significant effect on the mean values of perirenal, omental and mesenteric fats (0.267, 0.552 and 0.470 kg, respectively) and there was no influence on the percentages of moisture, ether extract, crude protein or ash in the loin between experimental diets. Diets containing by-products from the processing of oil seeds did not change fatty acids found in lamb meat. The use of by-products from oil seeds provided similar carcass and meat traits, thus their use can be recommended as eventual protein and energy sources for feedlot lambs.

Effects of the Temperature and Maturation Stages on the Germination of Roystonea regia Seeds

Roystonea regia (Kunth) O.F. Cook is largely used as ornamental. The propagation is done almost exclusively by seeds; however, there is a great variation in the germination process influenced by many factors. The objective of this work was to study the effects of the temperature and maturation stages on the germination of R. regia seeds. The experimental design was entirely randomized in a factorial arrangement 6x3 (six temperatures: constant at 20, 25, 30 and 35 degrees C and alternated at 20-30 and 25-35 degrees C, with a photoperiod of 12 hours; and three fruit maturation stages: brown, yellow and black), with four replications of 25 disseminules (seed with stucked endocarp) each. The disseminules had their mesocarp and exocarp were removed and shade dried. Their moisture content was determined, and then they were placed in plastic boxes (gerbox type) containing vermiculite. The disseminules, with the germinative intumescence, were daily noted until germination was steady. The germination rate and the germination speed index were calculated, and the data were submitted to the variance analysis. The means were compared by the Tukey test. It was concluded that the highest germination rate (99.7%) and germination speed were obtained by seeds from mature (black) fruits at the temperature of 35 degrees C.

Reproductive ecology and size of sexual maturity in the anomuran crab Aegla parana (Decapoda: Aeglidae)

In Southern Brazil, Aegla parana Schmitt, 1942 is characterized by a broad distribution throughout the Iguacu River basin, particularly between the southern state of Parana and the northern state of Santa Catarina, preferentially inhabiting streams with rocky substrates. Although there has been an increase in the number of studies about the population biology of Aeglidae, many aspects about the reproductive biology of A. parana are still unknown. Therefore, the present study aimed to investigate the size at sexual maturity, reproductive seasonality and recruitment of A. parana from November, 2008 to December, 2009, in a tributary of the Iguacu River located in Uniao da Vitoria, Parana, Brazil. Basic environmental factors were investigated to determine their influence on the reproductive cycle of this species. Gonadal stages were characterized macroscopically, and the presence or absence of embryos in females (ovigerous females) from monthly samples was recorded. The entire sample was composed of 436 males and 211 females. Although the smallest ovigerous female was 16.2 mm, the average size (carapace length, CL) at sexual maturity (CL50%) was calculated at 17.4 mm. The greatest percentage of females with developed (mature, near spawning) gonads stage was observed from January to June, 2009, while ovigerous females were recorded from April to July, 2009, after which the reproductive period ended. Recruitment occurred from October to December, 2009. The presence of ovigerous females was negatively correlated with temperature (Spearman, p < 0.05). Females carrying embryos were generally collected during periods of lower temperatures, whereas recruits entered the population during periods of higher temperatures, when food for them is more abundant in the region studied.

Agroclimatic zoning of the state of Minas Gerais for the production of high quality soybean seeds

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of particle size on the flexural strength and phase transformation of an airborne-particle abraded yttria-stabilized tetragonal zirconia polycrystal ceramic.

Statement of problem Because airborne-particle abrasion is an efficient method of improving the bond at the zirconia-cement interface, understanding its effect on the strength of yttria-stabilized tetragonal zirconia polycrystal is important. Purpose The purpose of this study was to evaluate the effect of the particle size used for airborne-particle abrasion on the flexural strength and phase transformation of a commercially available yttria-stabilized tetragonal zirconia polycrystal ceramic. Material and Methods For both flexural strength (20.0 × 4.0 × 1.2 mm) (n=14) and phase transformation (14.0-mm diameter × 1.3-mm thickness) (n=4), the zirconia specimens were made from Lava, and their surfaces were treated in the following ways: as-sintered (control); with 50-μm aluminum oxide (Al2O3) particles; with 120-μm Al2O3 particles; with 250-μm Al2O3 particles; with 30-μm silica-modified Al2O3 particles (Cojet Sand); with 120-μm Al2O3 particles, followed by 110-μm silica-modified Al2O3 particles (Rocatec Plus); and with Rocatec Plus. The phase transformation (%) was assessed by x-ray diffraction analysis. The 3-point flexural strength test was conducted in artificial saliva at 37°C in a mechanical testing machine. The data were analyzed by 1-way ANOVA and the Tukey honestly significant difference post hoc test (α=.05). Results Except for the Cojet Sand group, which exhibited statistically similar flexural strength to that of the as-sintered group and for the group abraded with 250-μm Al2O3 particles, which presented the lowest strength, airborne-particle abrasion with the other particle sizes provided the highest values, with no significant difference among them. The as-sintered specimens presented no monoclinic phase. The groups abraded with smaller particles (30 μm and 50 μm) and those treated with the larger ones (110 μm and/or 120 μm particles and 250 μm) exhibited percentages of monoclinic phase that varied from 4% to 5% and from 8.7% to 10%. Conclusions Except for abrasion with Cojet Sand, depending on the particle size, zirconia exhibited an increase or a decrease in its flexural strength. Airborne-particle abrasion promoted phase transformation (tetragonal to monoclinic), and the percentage of monoclinic phase varied according to the particle size.

Effects of crevice size on the establishment of macroalgae in subtropical streams

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effects of belt speed, pressure and grit size on the sanding of pinus elliottii wood

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Aspects of the activity rhythm and population size of troglophilic mygalomorph spiders (Trechona sp., Dipluridae) in a quartzite cave in Minas Gerais, Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Antitrypanosomal acetylene fatty acid derivatives from the seeds of porcelia macrocarpa (annonaceae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Dietary supplementation with sunflower seeds and vitamin E for fattening lambs improves the fatty acid profile and oxidative stability of the Longissimus lumborum

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of the particle size of maize, rice, and sorghum in extruded diets for dogs on starch gelatinization, digestibility, and the fecal concentration of fermentation products

The influence of rice, maize, and sorghum raw material particle size in extruded dry dog food on the digestibility of nutrients and energy and the fecal concentration of fermentation products was investigated. Three diets with similar nutrient compositions were formulated, each with 1 starch source. Before incorporation into diets, the cereals were ground into 3 different particle sizes (approximately 300, 450, and 600 mu m); therefore, a total of 9 diets were in a 3 x 3 factorial arrangement (3 cereals and 3 particle sizes). Fifty-four beagle dogs (12.0 +/- 0.1 kg BW) were randomly assigned to the diets, with 6 dogs per diet. The digestibility was measured with the chromium oxide method. The data were evaluated with ANOVA considering the carbohydrate source, grinding effect, and interactions. The means were compared with the Tukey test and polynomial contrasts (P < 0.05). With the same grinding procedure, rice was reduced to smaller particles than other cereals. The cereal mean geometric diameter (MGD) was directly related to starch gelatini-zation (SG) during extrusion. For rice diets, the MGD and SG did not change nutrient digestibility (P > 0.05); only GE digestibility was reduced at the largest MGD (P < 0.01). For maize and sorghum diets, the total tract apparent nutrient digestibility was reduced for foods with greater MGD and less SG (P < 0.01). A linear reduction in nutrient digestibility according to cereal particle size was observed for sorghum (r(2) < 0.72; P < 0.01). Higher concentrations of fecal total shortchain fatty acids (SCFA) were observed for sorghum diets (P < 0.05) than for other diets. The rice diets led to the production of feces with less lactate (P < 0.05). The increase in raw material MGD did not influence fecal SCFA for rice diets, but for the dogs fed maize and sorghum foods, an increase in propionate and butyrate concentrations were observed as MGD increased (P < 0.05). In conclusion, for dogs fed different particle sizes of the cereal starches in the extruded diets, the digestibility and fecal characteristics were affected, and this effect was ingredient dependent.

Influence of the collection season on production, size, and chemical composition of bee pollen produced by apis mellifera l.

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

0.1T magnetic resonance image in the study of experimental hydrocephalus in rats. Accuracy of the method in the measurements of the ventricular size

PURPOSE: To investigate the accuracy of 1.0T Magnetic Resonance Imaging (MRI) to measure the ventricular size in experimental hydrocephalus in pup rats. METHODS: Wistar rats were subjected to hydrocephalus by intracisternal injection of 20% kaolin (n=13). Ten rats remained uninjected to be used as controls. At the endpoint of experiment animals were submitted to MRI of brain and killed. The ventricular size was assessed using three measures: ventricular ratio (VR), the cortical thickness (Cx) and the ventricles area (VA), performed on photographs of anatomical sections and MRI. RESULTS: The images obtained through MR present enough quality to show the lateral ventricular cavities but not to demonstrate the difference between the cortex and the white matter, as well as the details of the deep structures of the brain. There were no statistically differences between the measures on anatomical sections and MRI of VR and Cx (p=0.9946 and p=0.5992, respectively). There was difference between VA measured on anatomical sections and MRI (p<0.0001). CONCLUSION: The parameters obtained through 1.0T MRI were sufficient in quality to individualize the ventricular cavities and the cerebral cortex, and to calculate the ventricular ratio in hydrocephalus rats when compared to their respective anatomic slice.

Effect of pre-flaring and file size on the accuracy of two electronic apex locators

Objective: This ex vivo study evaluated the effect of pre-flaring and file size on the accuracy of the Root ZX and Novapex electronic apex locators (EALs). Material and methods: The actual working length (WL) was set 1 mm short of the apical foramen in the palatal root canals of 24 extracted maxillary molars. The teeth were embedded in an alginate mold, and two examiners performed the electronic measurements using #10, #15, and #20 K-files. The files were inserted into the root canals until the "0.0" or "APEX" signals were observed on the LED or display screens for the Novapex and Root ZX, respectively, retracting to the 1.0 mark. The measurements were repeated after the pre-flaring using the S1 and SX Pro-Taper instruments. Two measurements were performed for each condition and the means were used. Intra-class correlation coefficients (ICCs) were calculated to verify the intra-and inter-examiner agreement. The mean differences between the WL and electronic length values were analyzed by the three-way ANOVA test (p<0.05). Results: ICCs were high (>0.8) and the results demonstrated a similar accuracy for both EALs (p>0.05). Statistically significant accurate measurements were verified in the pre-flared canals, except for the Novapex using a #20 K-file. Conclusions: The tested EALs showed acceptable accuracy, whereas the pre-flaring procedure revealed a more significant effect than the used file size.

Initial experience with Pomerantzeff's technique for reduction of the size of giant left atrium

Introduction: The most common indication for surgical correction of giant left atrium is associated with mitral valve insufficiency with or without atrial fibrillation. Several techniques for this purpose are already described with varying results. Objective: To present the initial experience with the tangential triangular resection technique (Pomerantzeff). Methods: From 2002 to 2010, four patients underwent mitral valve operation with reduction of left atrial volume by the technique of triangular resection tangential in our service. Three patients were female. The age ranged from 21 to 51 years old. The four patients presented with atrial fibrillation. Ejection fraction of left ventricle preoperatively ranged from 38% to 62%. The left atrial diameter ranged from 78mm to 140mm. After treatment of mitral dysfunction, the left atrium was reduced by resecting triangular tangential posterior wall between the pulmonary veins to avoid anatomic distortion of the mitral valve or pulmonary veins, reducing tension in the suture line. Results: Average hospital stay was 21.5 +/- 6.5 days. The mean cardiopulmonary bypass time was 130 +/- 30 minutes. There was no surgical bleeding or mortality in the postoperative period. All patients had sinus rhythm restored in the output of cardiopulmonary bypass, maintaining this rate postoperatively. The average diameter of the left atrium was reduced by 50.5% +/- 19.5%. The left ventricular ejection fraction improved in all patients. Conclusion: Initial results with this technique have shown effective reduction of the left atrium.