Studies in the polarographic behaviour of zinc-amino acid complexes

1. The polarographic behaviour of amino-acid complexes of zinc has been studied using seven amino acids as complexing agents. 2. The effect of varying the pH of the base solution and the concentration of amino-acid anion on the polarographic behaviour of zinc in these solutions have indi cated the formation of twelve amino-acid complexes. The stability constants could not be calculated due to the irreversible nature of the waves. 3. The effect of sodium hydroxide, sodium carbonate, and ammonia on the polarographic behaviour of zinc has been investigated. The results can be interpreted as due to the formation of mixed complexes in many systems. 4. Amino-acid base solutions have been found to be suitable for the polarographic estimation of zinc.

Some observations on the behaviour of colchicine-treated cells during recovery in Allium CEPA

The accidental discovery of a cell with haploid number of diplochromosomes in squashes of colchicine-treated root tips led to a search for haploid anaphases in treated roots allowed to recover in water. No haploid anaphases were seen. Apart from the divisional stages of diploid and tetraploid nuclei, cells with two pro-, meta- and ana-phases were observed. The formation of distinct cell boundaries by each nucleus of an originally multinucleate cell indicates their potentialities in this direction.

Low-temperature deformation behaviour of polycrystalline copper

Low-temperature plastic flow in copper was investigated by studying its tensile and creep deformation characteristics. The dependence of the flow stress on temperature and strain rate was used to evaluate the thermal activation energy while the activation area was derived from the change-in-stress creep experiments. A value of 0.6 eV was obtained for the total obstacle energy both in electrolytic and commerical copper. The activation areas in copper of three selected purities fell in the range 1200 to 100 b2. A forest intersection mechanism seems to control the temperature dependent part of the flow stress. The increase in the athermal component of the flow stress with impurity content in copper is attributed to a change in the dislocation density. The investigation also revealed that thermal activation of some attractive junctions also takes place during low-temperature creep. The model of attractive junction formation on a stress decrement during creep, yields a value of 45±10 ergs cm-2 for the stacking fault energy in copper.

Elastic behaviour of matter under very high pressures - Uniform compression

In order to study the elastic behaviour of matter when subjected to very large pressures, such as occur for example in the interior of the earth, and to provide an explanation for phenomena like earthquakes, it is essential to be able to calculate the values of the elastic constants of a substance under a state of large initial stress in terms of the elastic constants of a natural or stress-free state. An attempt has been made in this paper to derive expressions for these quantities for a substance of cubic symmetry on the basis of non-linear theory of elasticity and including up to cubic powers of the strain components in the strain energy function. A simple method of deriving them directly from the energy function itself has been indicated for any general case and the same has been applied to the case of hydrostatic compression. The notion of an effective elastic energy-the energy require to effect an infinitesimal deformation over a state of finite strain-has been introduced, the coefficients in this expression being the effective elastic constants. A separation of this effective energy function into normal co-ordinates has been given for the particular case of cubic symmetry and it has been pointed out, that when any of such coefficients in this normal form becomes negative, elastic instability will set in, with associated release of energy.

Studies in the polarographic and coulometric behaviour of aromatic nitro compounds—III. nitrosobenzene in ethanol, acetone and dioxan

The green nitrosobenzene monomer is reduced polarographically to phenylhydroxylamine in the pH range 4—9. Though this reduction is known to be a two-electron process, coulometry invariably gives a lower value of n because of the reaction of unreacted nitrosobenzene and the phenylhydroxylamine formed. The green monomer is attacked by mercury in acid medium. In alkaline medium, the green monomer undergoes a change that follows first-order kinetics with respect to nitrosobenzene. The rate of the transformation depends on the solvent. It decreases in the order acetone > ethanol > dioxan.

Psychosocial processes of health behaviour change in a lifestyle intervention : Influences of gender, socioeconomic status and personality

Background: The onset of many chronic diseases such as type 2 diabetes can be delayed or prevented by changes in diet, physical activity and obesity. Known predictors of successful behaviour change include psychosocial factors such as selfefficacy, action and coping planning, and social support. However, gender and socioeconomic differences in these psychosocial mechanisms underlying health behaviour change have not been examined, despite well-documented sociodemographic differences in lifestyle-related mortality and morbidity. Additionally, although stable personality traits (such as dispositional optimism or pessimism and gender-role orientation: agency and communion) are related to health and health behaviour, to date they have rarely been studied in the context of health behaviour interventions. These personality traits might contribute to health behaviour change independently of the more modifiable domain-specific psychosocial factors, or indirectly through them, or moderated by them. The aims were to examine in an intervention setting: (1) whether changes (during the three-month intervention) in psychological determinants (self-efficacy beliefs, action planning and coping planning) predict changes in exercise and diet behaviours over three months and 12 months, (2) the universality assumption of behaviour change theories, i.e. whether preintervention levels and changes in psychosocial determinants are similar among genders and socioeconomic groups, and whether they predict changes in behaviour in a similar way in these groups, (3) whether the personality traits optimism, pessimism, agency and communion predict changes in abdominal obesity, and the nature of their interplay with modifiable and domain-specific psychosocial factors (self-efficacy and social support). Methods: Finnish men and women (N = 385) aged 50 65 years who were at an increased risk for type 2 diabetes were recruited from health care centres to participate in the GOod Ageing in Lahti Region (GOAL) Lifestyle Implementation Trial. The programme aimed to improve participants lifestyle (physical activity, eating) and decrease their overweight. The measurements of self-efficacy, planning, social support and dispositional optimism/pessimism were conducted pre-intervention at baseline (T1) and after the intensive phase of the intervention at three months (T2), and the measurements of exercise at T1, T2 and 12 months (T3) and healthy eating at T1 and T3. Waist circumference, an indicator of abdominal obesity, was measured at T1 and at oneyear (T3) and three-year (T4) follow-ups. Agency and communion were measured at T4 with the Personal Attributes Questionnaire (PAQ). Results: (1) Increases in self-efficacy and planning were associated with three-month increases in exercise (Study I). Moreover, both the post-intervention level and three-month increases (during the intervention) in self-efficacy in dealing with barriers predicted the 12-month increase in exercise, and a high postintervention level of coping plans predicted the 12-month decrease in dietary fat (Study II). One- and three-year waist circumference reductions were predicted by the initial three-month increase in self-efficacy (Studies III, IV). (2) Post-intervention at three months, women had formed more action plans for changing their exercise routines and received less social support for behaviour change than men had. The effects of adoption self-efficacy were similar but change in planning played a less significant role among men (Study I). Examining the effects of socioeconomic status (SES), psychosocial determinants at baseline and their changes during the intervention yielded largely similar results. Exercise barriers self-efficacy was enhanced slightly less among those with low SES. Psychosocial determinants predicted behaviour similarly across all SES groups (Study II). (3) Dispositional optimism and pessimism were unrelated to waist circumference change, directly or indirectly, and they did not influence changes in self-efficacy (Study III). Agency predicted 12-month waist circumference reduction among women. High communion coupled with high social support was associated with waist circumference reduction. However, the only significant predictor of three-year waist circumference reduction was an increase in health-related self-efficacy during the intervention (Study IV). Conclusions: Interventions should focus on improving participants self-efficacy early on in the intervention as well as prompting action and coping planning for health behaviour change. Such changes are likely to be similarly effective among intervention participants regardless of gender and educational level. Agentic orientation may operate via helping women to be less affected by the demands of the self-sacrificing female role and enabling them to assertively focus on their own goals. The earlier mixed results regarding the role of social support in behaviour change may be in part explained by personality traits such as communion.

Natural history and behaviour of the primitively eusocial wasp Ropalidia marginata (Hymenoptera: Vespidae): a comparison of the two sexes

We report the natural history and behaviour of the primitively eusocial wasp Ropalidia marginata with a special reference to the males. We found that just as nests of this species are found throughout the year, so are the males. Females spend all their life in their nests but males stay in their natal nests only for 1-12 days and leave to lead a nomadic life. Males maintained in the laboratory can live for up to 140 days. Like all eusocial hymenopteran males, R. marginata males also do not perform any colony maintenance activities. We found that males did not forage or feed larvae. Compared with females, males showed fewer dominance and subordinate behaviours and being solicited behaviour and more feeding self and soliciting behaviours. By comparing males with young females, we found similar differences, except that the males showed similar rates of feeding self and higher rates of subordinate behaviour.

Studies in the polarographic and coulometric behaviour of aromatic nitro compounds—III. nitrosobenzene in ethanol, acetone and dioxan

The green nitrosobenzene monomer is reduced polarographically to phenylhydroxylamine in the pH range 4—9. Though this reduction is known to be a two-electron process, coulometry invariably gives a lower value of n because of the reaction of unreacted nitrosobenzene and the phenylhydroxylamine formed. The green monomer is attacked by mercury in acid medium. In alkaline medium, the green monomer undergoes a change that follows first-order kinetics with respect to nitrosobenzene. The rate of the transformation depends on the solvent. It decreases in the order acetone > ethanol > dioxan.

Influence of drying on the liquid limit behaviour of a marine clay

The possible mechanisms of particle aggregation and reduction in liquid limit of the Cochin marine clay on drying are investigated. Mineralogical analysis showed the absence of halloysite in the marine specimen. Experimental results also ruled out the possibility of cementitious material being responsible for particle aggregation and reduction in clay plasticity on drying. The presence of calcium and magnesium as the predominant exchangeable ions and of a high pore salt concentration facilitates strong interparticle attraction and small particle separations; the latter leads to development of significant capillary stresses that permits an intimate contact of particles and growth of strong van der Waals' and Coulombic bonds.

Asymptotic behaviour and boundedness of linear systems with time varying coefficients

Motivated by developments in spacecraft dynamics, the asymptotic behaviour and boundedness of solution of a special class of time varying systems in which each term appears as the sum of a constant and a time varying part, are analysed in this paper. It is not possible to apply standard textbook results to such systems, which are originally in second order. Some of the existing results are reformulated. Four theorems which explore the relations between the asymptotic behaviour/boundedness of the constant coefficient system, obtained by equating the time varying terms to zero, to the corresponding behaviour of the time varying system, are developed. The results show the behaviour of the two systems to be intimately related, provided the solutions of the constant coefficient system approach zero are bounded for large values of time, and the time varying terms are suitably restrained. Two problems are tackled using these theorems.

Behaviour of Bi-adhesive Joints

The use of relatively low modulus adhesive at the ends of overlap in a bi-adhesive bondline of a bonded joint can reduce the stress concentration significantly and, therefore, potentially lead to higher strength of the joint. This study presents the two-dimensional and three-dimensional nonlinear (geometric and material) finite element analyses of adhesively bonded single lap joints having modulus-graded bondline under monotonic loading conditions. The adhesives were modelled as an elasto-plastic multi-linear material, while the substrates were regarded as both linear elastic and bi-linear elasto-plastic material. The computational simulations have been performed to investigate the bondline behaviour by studying the stress and strain distributions both at the mid-plane as well as at the interface of the bondline. It has been observed that the static strength is higher for joints with bi-adhesive bondlines compared to those with single adhesives in bondline. Higher joint strength has also been observed for optimum bi-adhesive bondline ratio through parametric studies. Effects of load level, and bondline thickness on stress distribution in the bi-adhesive bondline have also been studied. 3D analysis results reveal the existence of complex multi-axial stress/strain state at the ends of the overlap in the bondline which cannot be observed in 2D plane strain analysis. About 1/3rd of the width of the joint from the free edge in the width direction has 3D stress state, especially in the compliant adhesive of the bondline. Magnitudes of longitudinal and lateral stress/strain components are comparable to peel stress/strain components. It has also been analytically shown that the in-plane global stiffness of the joint remains unaffected by modulus gradation of the bondline adhesive. (C) Koninklijke Brill NV, Leiden, 2010.

Tool wear monitoring using ant behaviour

In this paper we show the applicability of Ant Colony Optimisation (ACO) techniques for pattern classification problem that arises in tool wear monitoring. In an earlier study, artificial neural networks and genetic programming have been successfully applied to tool wear monitoring problem. ACO is a recent addition to evolutionary computation technique that has gained attention for its ability to extract the underlying data relationships and express them in form of simple rules. Rules are extracted for data classification using training set of data points. These rules are then applied to set of data in the testing/validation set to obtain the classification accuracy. A major attraction in ACO based classification is the possibility of obtaining an expert system like rules that can be directly applied subsequently by the user in his/her application. The classification accuracy obtained in ACO based approach is as good as obtained in other biologically inspired techniques.