Reproductive cycle of Hepatus pudibundus (Herbst, 1785) (Crustacea, Decapoda, Calappidae) in Ubatuba, SP, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação da resistência de união metalocerâmica em função de diferentes tempos de oxidação prévia

Avaliou-se a resistência de união metal/porcelana utilizando-se uma liga de Ni-Cr, submetida a diferentes tempos de oxidação prévia com o sistema cerâmico Vita-VMK, através do teste preconizado por CHIODI NETTO3. A análise dos resultados permitiu as seguintes conclusões: a ausência da oxidação prévia possibilitou os melhores resultados, sendo que a diferença foi estatisticamente significante; diferentes tempos de oxidação prévia provocaram redução acentuada nos valores obtidos e foram semelhantes entre si; o grupo submetido ao processo de jateamento após a oxidação prévia por cinco minutos mostrou resultados similares aos grupos que também passaram pelo processo de oxidação e não sofreram jateamento posterior.

Distribuição do caranguejo Hepatus pudibundus (Herbst, 1785) (Crustacea, Decapoda, Brachyura) na Enseada da Fortaleza, Ubatuba (SP), Brasil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação da influência dos tipos de tratamento superficial da porcelana glazeada na colagem de braquetes ortodônticos

OBJETIVO: o objetivo deste trabalho foi avaliar a influência do tipo de tratamento superficial da porcelana na resistência adesiva da colagem de braquetes ortodônticos e o modo de fratura após a descolagem. METODOLOGIA:foram confeccionados 80 corpos-de-prova de porcelana, divididos em quatro grupos (n = 18) de acordo com os diferentes tratamentos de superfície: (G1) ponta diamantada; (G2) ponta diamantada e silano; (G3) ácido hidrofluorídrico e (G4) ácido hidrofluorídrico e silano. Após o preparo das superfícies, braquetes Edgewise (Morelli) foram colados com resina (Transbond XT, 3M) e submetidos ao teste de cisalhamento. Os resultados foram avaliados estatisticamente pelo teste de Kruskal-Wallis. RESULTADO: o grupo G1 apresentou uma média de resistência de 3,35, o G2 3,97, o G3 2,56 e o G4 3,10. CONCLUSÃO: constatou-se que não houve diferença estatisticamente significativa na resistência adesiva do braquete entre os tipos de tratamentos estudados (p > 0,05) e os modos de fratura ocorreram, em sua grande maioria, na interface braquete/resina. Este estudo indica que todos os tipos de tratamentos apresentados são eficientes para a colagem.

Aplicação dos isótopos estáveis em aqüicultura

O produto mais importante do conhecimento é a ignorância. A situação sugere a imagem de alguém que vive numa ilha de conhecimento cercado por um mar de ignorância. Quando a área dessa ilha aumenta pelo progresso da ciência, também aumenta o litoral, - a fronteira com o desconhecido. Esta expansão é o fruto mais valioso do conhecimento (David Gross, Nobel em Física, 2004). O uso dos isótopos estáveis dos bioelementos (CHON'S) presentes na Atmosfera, Hidrosfera, Litosfera e Biosfera enquadra-se neste contexto, surgindo como ferramenta de alto potencial em pesquisas nas diversas áreas das Ciências da Vida. Com organismos aquáticos, a aplicação dos isótopos estáveis do carbono (δ 13C) e do nitrogênio (δ 15N) tem ocorrido em diversas áreas. em larvas de pacu Piaractus mesopotamicus, a técnica evidenciou a escolha voluntária entre organismos vivos e dieta seca pelos animais, desde as primeiras alimentações até o final da larvicultura. Na carcinicultura, o crescimento do Penaeus vannamei resultou do aproveitamento dos alimentos oferecidos e da produtividade primária do lago (biota). Por meio do balanço de massa e isotópico foi possível determinar a contribuição da biota, da ordem de 44 a 86% do carbono assimilado pelos animais durante o crescimento. Outro exemplo é com o caranguejo de mangue Sesarma rectum, em que sua preferência alimentar por Spartina alterniflora (C4) versus Rhizophora mangle (C3) ou Hibiscus tiliaceus (C3) foi evidenciada pelo modelo isotópico de duas fontes alimentares e os isótopos estáveis do carbono (δ13C). A técnica dos isótopos estáveis associada ao conhecimento dos conceitos básicos da variabilidade isotópica natural e ao uso criterioso das razões 13C/12C; ²H/¹H; 18O/16O; 15N/14N e 36S/34S revela-se como um avanço na fronteira dos conhecimentos, nas diversas reentrâncias do litoral da aqüicultura.

Shear bond strengths of a ceramic system to alternative metal alloys

Statement of problem. The success of metal-ceramic restorations is influenced by the compatibility between base metal alloys and porcelains. Although porcelain manufacturers recommend their own metal systems as the most compatible for fabricating metal-ceramic prostheses, a number of alloys have been used.Purpose. This study evaluated the shear bond strength between a porcelain system and 4 alternative alloys.Material and methods. Two Ni-Cr alloys: 4 ALL and Wiron 99, and 2 Co-Cr alloys: IPS d.SIGN 20 and Argeloy NP were selected for this study. The porcelain (IPS d.Sign porcelain system) portion of the cylindrical inetal-ceramic specimens was 4 mm thick and 4 mm high; the metal portion was machined to 4 x 4 mm, with a base that was 5 nun thick and 1 mm high. Forty-four specimens were prepared (n=11). Ten specimens from each group were subjected to a shear load oil a universal testing machine using a 1 min/min crosshead speed. One specimen from each group was observed with a scanning electron microscope. Stress at failure (MPa) was determined. The data were analyzed with a 1-way analysis of variance (alpha=.05).Results. The groups, all including IPS d.Sign porcelain, presented the following mean bond strengths (+/-SD) in MPa: 4 ALL, 54.0 +/- 20.0; Wiron, 63.0 +/- 13.5; IPS d.SIGN 20, 71.7 +/- 19.2; Argeloy NP, 55.2 +/- 13.5. No significant differences were found among the shear bond strength values for the metal-ceramic specimens tested.Conclusion. None of the base metal alloys studied demonstrated superior bond strength to the porcelain tested.

Comparative population biology of Uca rapax (Smith, 1870) (Brachyura, Ocypodidae) from two subtropical mangrove habitats on the Brazilian coast

The structure of two populations of the fiddler crab Uca rapax in two subtropical mangrove habitats near Ubatuba, State of São Paulo, Brazil were compared. The size - frequency distribution, sex ratio, and recruitment were evaluated. Sampling was performed monthly from April 2001 to March 2002 in the Itamambuca and Ubatumirim habitats. Crabs were caught manually for 15 min by two collectors during low tide. The carapace width of each crab was measured with a digital caliper, and the sex and ovigerous state were recorded. The median size of the carapace width of males was greater than that of females at both sites (P<0.05). The median size of the crabs from Itamambuca was larger than at Ubatumirim (P<0.05). Only 28 ovigerous females were obtained from both mangroves, which suggested that females might remain in their burrows during the incubation period. The highest recruitment pulse occurred in winter for both populations, probably as a consequence of high reproductive activity during summer. The sex ratio in the size classes showed an anomalous pattern, with a higher frequency of females in the intermediate size classes. This may be related to a greater energy requirement for reproduction in females, thus delaying growth. The variable environmental conditions to which Uca rapax populations are subject appear to act directly or indirectly on the population, causing variations in growth and reproductive processes in the different populations investigated here.

Appraisal of the chelipeds size on Hepatus-pudibundus (Herbst, 1785) (Crustacea, Calappidae) in function of sex and maturation

This paper appraises the influence of chelipeds on sexual and maturation phasis of the crab Hepatus pudibundus (Herbst, 1785), collected in Ubatuba (SP) region. The allometric constants obtained from the regression (carapace width X cheliped weight) adjusted to a power function (Y=aX(b)) were analysed. It was verified that males show larger chelipeds than females. The mean percentage of the chelipeds weight differs in sex and maturation.

Evaluation of shear bond strength at the interface of two porcelains and pure titanium injected into the casting mold at three different temperatures

Statement of problem. Titanium has physical and mechanical properties, which have led to its increased use in dental prostheses despite casting difficulties due to high melting point and formation of oxide layers which affect the metal-ceramic bond strength.Purpose. This in vitro study evaluated the shear bond strength of the interface of 2 dental porcelains and pure titanium injected into a mold at 3 different temperatures.Material and methods. Using commercially pure (cp) titanium bars (Titanium, Grade I) melted at 1668degreesC and cast at mold temperatures of 430degreesC, 700degreesC or 900degreesC, 60 specimens were machined to 4 x 4 mm, with a base of 5 x 1 mm. The 4-mm surfaces were airborne-particle abraded with 100 mum aluminum oxide before applying and firing the bonding agent and evaluating the 2 porcelains (Triceram/Triline ti and Vita Titankeramik). Ten specimens were prepared for each temperature and porcelain combination Shear bond testing was performed in a universal testing machine, with a 500-kg load cell and crosshead speed of 0.5 mm/min. The specimens were loaded until failure. The interfaces of representative fractured specimens of each temperature were examined with a scanning electron microscope (SEM) and energy dispersive spectrometer (EDS). Data for shear bond strength (MPa) were statistically analyzed by 2-way ANOVA and the Tukey test (alpha = .05).Results. The results showed significant differences for the metal/porcelain interaction effect (P = .0464). There were no significant differences for the 2 porcelains (P = .4250). The Tukey test showed a significant difference between the pair cp Ti 430degreesC Triceram and cp Ti 900degreesC Triceram, with respective mean values and SDs of 59.74 +/- 11.62 and 34.03 +/- 10.35 MPa.Conclusion. Triceram porcelain showed a bond strength decrease with an increase in the mold temperature for casting titanium. The highest bond strength for Vita porcelain and the best metal-ceramic interface observed with the SEM were found with the mold temperature of 700degreesC.

Determination of Cd(II) and Cd-metallothioneins in biological extracts using baker's yeast and inductively coupled plasma optical emission spectrometry

The use of Saccharomyces cerevisiae as a sorbent material to separate Cd(II) and Cd-metallothionein complex (Cd-MT) has been explored. Solid-liquid phase extractions were carried out in batch mode and the main parameters of the process (pH, temperature, time of incubation, amount of biomass and analyte) were evaluated. Under optimized conditions, the yeast quantitatively retain (94 +/- 5%) the Cd(II) while 97 +/- 2% of the Cd-MT remain in the supernatant. on base of the findings of this study, a simple method is proposed to determine Cd(II) and Cd-MT in cytosols extracted from mouse kidney and crab hepatopancreas. Inductively coupled plasma optical emission spectrometry was used to quantify the analytes in solid and liquid phase. Determination of Cd in the solid phase was carried out by introducing a slurry of the yeast (0.0625 g/10 mL) directly to the inductively coupled plasma optical emission spectrometer. Mixed standards solutions, which also have been submitted to the extraction procedure, were used to quantify the analytes in the samples. Thus, matrix effects due to nebulization of the slurry were overcame. Limits of detection (3 sigma) for Cd(II) and Cd-MT were 1.5 and 1.2 mu g L-1, respectively. Relative standard deviations of signals were 4.2% for measurements in the slurry of solid phase and 2.1% for measurements in the liquid phase. Recoveries of the analytes in cytosol samples were between 76 and 114%. The concentrations of Cd(II) (2.4 +/- 0.5 mu g L-1) and Cd-MT (3.0 +/- 0.5 mu g L-1) found by using the proposed approach were close to those found by tangential-flow ultrafiltration technique (2.6 +/- 0.7 mu g L-1 for Cd(II) and 3.7 +/- 1.7 mu g L-1 for Cd-MT).

Selection and shell relationship in Isocheles-sawayai forest and Saint-laurent, 1967 (crustacea, anomura, diogenidae)

A populational sample of Isocheles sawayai Forest & Saint Laurent, 1967 was analysed in order to detect the validity of the shell aperture size as a parameter in the gastropod shell selection. The gastropods genus occupied by this hermit crab were: Thais, Buccinanops, Olivancillaria, Polinices and Cymatium. The power function (y = a.x(b)) was the best equation to represent biologically the regression analyses carried out among the measured parameters.

Hardness and compressive strength of indirect composite resins: effects of immersion in distilled water

The aim of this study was to evaluate the effect of ageing in distilled water on the hardness and compressive strength of a direct composite resin Z100, a feldspatic porcelain (Noritake) and three indirect composites (Artglass, Solidex and Targis). For the Vickers hardness tests, five disk-shaped specimens (2 x 4 mm) of each material were prepared according to the manufacturers' instructions. The hardness tests were conducted using a Vickers diamond indentor. Compressive strength measurements were recorded on cylindrical specimens with a diameter of 6 mm and a length of 12 mm. The compression tests were carried out with a constant cross-head speed of 0.5 mm min(-1) on a mechanical test machine. For each material, 10 specimens were tested after 7 days of dry storage at 37 +/- 1 degreesC and 10 specimens were tested after water storage at 37 +/- 1 degreesC for 180 days. Noritake porcelain specimens showed higher hardness values than the composites. Among the composite materials, Z100 promoted the highest VHN values, regardless of the ageing periods. The results showed that Solidex and Z100 had the highest compressive strength values. Ageing in water reduced the hardness for all composites, but had no long-term effect on the compressive strength.

Epibiosis and molting in two species of Callinectes (Decapoda: Portunidae) from Brazil

The external infestation of Callinectes ornatus Ordway, 1863 and Callinectes danae Smith, 1869, in particular cirripeds, was studied for two consecutive years in the Ubatuba Bay (SP) (23 degrees 26' S and 45 degrees 02' W). Bryozoans, polychaetes and cirripeds were found on both swimming crab species, but cirripeds were the most abundant and frequent. The number of infested swimming crabs increased proportionally to carapace size, but not surpassing 30 %, suggesting an absence of terminal anecdysis in both species. The establishment of the pernicious organisms on their hosts is influenced by other factors, such as their habit of burying themselves in sediments. The correlation between molting activity in adult specimens of both sexes and the low incidence of epizoonts suggest that C. ornatus and C. danae may be molting after maturity.

Exotic species of freshwater decapod crustaceans in the state of São Paulo, Brazil: records and possible causes of their introduction

Based on recent surveys of the freshwater decapod fauna, distributional data of five exotic species of freshwater decapod crustaceans for the hydrographic basins of the state of São Paulo are presented, as part of a large initiative for a comprehensive survey of the state's biodiversity (BIOTA-FAPESP Program). These species are the North American crayfish Procambarus clarkii (Girard) (Cambaridae), the crab Dilocarcinus pagei Stimpson (Trichodactylidae) from the Amazon and Paraguay/lower Parana River Basins, and the palaemonid shrimps Macrobrachium rosenbergii (De Man), from the Indo-Pacific region, Macrobrachium amazonicum (Heller) and Macrobrachium jelskii (Miers), both from the Orinoco, Amazon and the Paraguay/lower Parana River Basins. Possible modes by which their introduction might have occurred are commented upon and potential consequences are discussed.

Hepatozoon canis infection of wild carnivores in Brazil

Hepatozoon canis was diagnosed in a crab-eating fox (Cerdocyon thous) found on a highway in the region of Botucatu, São Paulo, Brazil, after being hit by a car. The fox had bilateral fractures of the olecranon, which was corrected by osteosynthesis. Hematologic findings included a neutrophilia, eosinophilia, monocytosis and mild anemia. In the Leishman-stained blood film, gametocytes of Hepatozoon canis in neutrophils were identified measuring 9.1+/-0.54x5.3+/-0.46 mu m. (C) 1997 Elsevier B.V. B.V.