991 resultados para palm nut
Resumo:
Palm oil containing 40% fatty acids was converted to methyl esters using zinc carboxylates as the esterification/transesterification catalyst. The reaction was optimized using a factorial design in which the effects of the alcohol:fatty acids molar ratio (MRAG) and the catalyst concentration (CAT) were assessed. The best conversion was achieved with CAT at 4 wt% and MRAG at 4:1. However, the solid catalyst presented significant structural changes after use. For instance, laurate anions were replaced by carboxylates of higher molecular mass, leading to the formation of a new catalytically active layered structure. Also, the glycerin obtained as a co-product contained 86 wt% glycerol.
Resumo:
This work presents the biofuel production results of the esterification of fatty acids (C12-C18) and high-acid-content waste vegetable oils from different soap stocks (soybean, palm, and coconut) with methanol, ethanol, and butanol by acid catalysis. We used Amberlyst-35 (A35) sulfonic resin as a heterogeneous acid catalyst and p-toluenesulfonic acid as a homogeneous catalyst for comparison. Both the heterogeneous (A35) and homogeneous (p-toluenesulfonic acid) reactions were performed with 5% w/w of catalyst. The final products were analyzed by proton nuclear magnetic resonance (1H NMR). The homogeneous catalyzed esterification of fatty acids with methanol, ethanol, and butanol produced esters with yields higher than 90%. In the reaction with fatty acids and methanol catalyzed by A35, the best results were achieved with lauric acid and methanol, with a yield of 97%. An increase in the hydrocarbon chain decreased the rate of conversion and yield for stearic acid with methanol, which was 90%. Maximum biodiesel production was achieved from coconut and soybean soap stocks and methanol (96%-98%), which showed conversions very close to those obtained from their respective fatty acids. Microwave irradiation reduced the reaction time from 6 to 1 h in the esterification reaction of fatty acids with butanol.
Resumo:
The market for natural cosmetics featuring ingredients derived from Amazon natural resources is growing worldwide. However, there is neither enough scientific basis nor quality control of these ingredients. This paper is an account of the chemical constituents and their biological activities of fourteen Amazonian species used in cosmetic industry, including açaí (Euterpe oleracea), andiroba (Carapa guianensis), bacuri (Platonia insignis), Brazil nut (Bertholletia excelsa), buriti (Mauritia vinifera or M. flexuosa), cumaru (Dipteryx odorata), cupuaçu (Theobroma grandiflorum), guarana (Paullinia cupana), mulateiro (Calycophyllum spruceanum), murumuru (Astrocaryum murumuru), patawa (Oenocarpus bataua or Jessenia bataua), pracaxi (Pentaclethra macroloba), rosewood (Aniba rosaeodora), and ucuuba (Virola sebifera). Based on the reviewed articles, we selected chemical markers for the quality control purpose and evaluated analytical methods. Even though chromatographic and spectroscopic methods are major analytical techniques in the studies of these species, molecular approaches will also be important as used in food and medicine traceability. Only a little phytochemical study is available about most of the Amazonian species and some species such as açaí and andiroba have many reports on chemical constituents, but studies on biological activities of isolated compounds and sampling with geographical variation are limited.
Resumo:
Artikel i konferensrapport.
Resumo:
Artikel i konferensrapport.
Resumo:
Termites are well known for their ability to damage wood and various types of wood-derived products. This study was performed in the municipality of Seropédica, Rio de Janeiro state, Brazil, with the objective of evaluating the susceptibility of the wood of five different forest species to the activity of the Asian subterranean termite, Coptotermes gestroi. Wood stakes from the following forest species were used as specimens: pine (Pinus sp., Pinaceae), Brazil nut (Bertholletia excelsa, Lecythidaceae), cabbage angelin (Andira inermis, Leguminosae-Papilionoideae), maçaranduba (Manilkara huberi, Sapotaceae) and pink ipê (Tabebuia avellanedae, Bignoniaceae). The stakes, with dimensions of 2 cm x 2 cm x 16 cm, were subjected to the activity of C. gestroi from September 2, 2006 to June 2, 2007. The experimental design consisted of randomized blocks with four replications in an 11 x 5 x 3 factorial arrangement. Twelve stakes of each of the five forest species were installed at each of eleven sites, totaling 660 stakes. Three evaluations were performed, at 90, 180 and 270 days after stake installation. The results indicated that the pine, Brazil nut and cabbage angelin stakes were more susceptible to C. gestroi attack, while the pink ipê and maçaranduba stakes suffered no significant damage from this termite. There was a significant negative correlation between the wood consumption rate and the wood density of the species studied. The woods most susceptible to C. gestroi attack presented moderate to low densities and therefore less resistance, as in the case of pine and cabbage angelin.
Resumo:
Fruits and almond from the dendezeiro, oil palmbelonging to the Elaeis genus,are widely used for the production of cookingoils or for the pharmaceutical and cosmetic industries.In the last decade, this oil palm also emerged as a promising source for commercialbiofuel production. This study evaluated the effect of different culture media, MS (MURASHIGUE AND SKOOG) and Y3 (EEUWENS)and carbohydrates duringin vitro germination of zygotic embryos, the effect of growth regulators GA3, NAA and BA Ponin vitro seedling development, and the survival rate of acclimatized seedlingsof Manicoré hybrid (Elaeis oleifera x E. guineensis). Zygotic embryos were inoculated on MS and modified Y3 media, supplemented with different sucrose concentrations (30, 45, and 60 gL-1) or sorbitol (36 gL-1), and the germination rate was evaluated after 30 days. Subsequently, seedlings were transferred to modified Y3 culture medium supplemented with differentGA3 concentrations (3.5 and 7 mgL-1) or without it, combined or not with 1 mgL-1 of NAA, 5 mgL-1 of BAP.The highest germinationpercentage of germinated embryos (92%) was observed in MS medium supplemented with 36 gL-1 sorbitol. Culture media supplemented with growth regulatorsGA3, NAA and BAP promoted greater shoot lengththan control media. Rooted seedlings showed high survival percentage (85%) during acclimatization.
Resumo:
ABSTRACT The objectives of this study were to morphologically characterize fruits of the babassu palm tree (Attalea vitrivir) and to estimate their productivity in the north of Minas Gerais State, Brazil. Twenty mature fruits were collected from 10 plants in three different areas in Januária, Minas Gerais. Eighteen biometric parameters of the fruits were measured, the oil contents of the seeds was determined, the adherence to normal distribution was evaluated, distribution frequencies were evaluated and the effects of individuals and areas on the variables and the correlations between them were analyzed. The production of fruit bunches per plant and the number of fruits per bunch from 10 plants were quantified in three areas and the potential production under both natural harvesting and cultivation conditions were estimated. Significant differences were found among all of the biometric parameters examined between the different individuals and the different areas, which shows wide morphological variability in the fruits. The average oil content was 45.7%, but with significant differences among individuals. The observed variability favors the selection of productive individuals in genetic improvement programs. The potential productivity of endocarps and oil based on a density of 400/plants per hectare would be respectively 6.4 and 1.2 tons/ha, which indicates the possibility of using A. vitrivir for producing charcoal, bio fuels, and for carbon fixation.
Resumo:
ABSTRACT The ecological restoration of degraded areas using seeds collected in forest remnants has shown significant results. This study was developed to verify the potential of seed rain to regenerate forest fragments of a Permanent Preservation Area (PPA) in the Apa River Basin which is located in the southwestern portion of the Mato Grosso do Sul state, Brazil. To develop the study, we installed 25 collectors measuring 1 m2 each, which were systematically distributed on an area of 1.5ha. Seed gathering was conducted in a monthly basis throughout the year of 2013. A total of 26.411 propagules were identified and distributed among 50 species, 45 genera and 32 families. In terms of the propagules distribution, 70.51% were identified as trees, 22.8% as lianas, 6.5% as shrubs, 0.1 as herbaceous, 0.05% as palm and 0.05% could not be classified. The value for the Shannon Diversity Index was (H') = 1.67 and the Pielou Evenness index was (J) = 0.42. These results indicate that the seeds rain has low species diversity with the abundance of a few species. The overall results suggest that seed rain can be a potential technique for restoration of the PPAs and other forested areas. However, it is necessary to enhance the diversity of tree species.
Resumo:
ABSTRACT This work aimed to evaluate the consequences of the monthly extraction of immature leaves in survival, leaf production and reproductive performance ofCopernicia prunifera H. E. Moore palm, popularly known as carnaúba. One hundred sixty reproductive adult palms were monitored for 17 months in four extractive communities located at the coast of the state of Piauí. As a result, it was observed that leaves, flowers, fruits and seeds production were reduced in the palm submitted to 50% or 75% monthly extraction. Higher levels of extraction were followed by smaller levels in seed germination. No deaths were observed even in the group subjected to 75% monthly leaves exploration. In order not to produce damage to palm trees development it is suggested that leaf extraction rate should not exceed 25% monthly as well as pausing of extractive activity preferentially during fruit maturation.
Resumo:
Tillgången på traditionella biobränslen är begränsad och därför behöver man ta fram nya, tidigare outnyttjade biobränslen för att möta de uppställda CO2 emissionsmålen av EU och det ständigt ökande energibehovet. Under de senare åren har intresset riktats mot termisk energiutvinning ur olika restfraktioner och avfall. Vid produktion av fordonsbränsle ur biomassa är den fasta restprodukten ofta den största procesströmmen i produktionsanläggningen. En riktig hantering av restprodukterna skulle göra produktionen mera lönsam och mer ekologiskt hållbar. Ett alternativ är att genom förbränning producera elektricitet och/eller värme eftersom dessa restprodukter anses som CO2-neutrala. Målsättningen med den här avhandlingen var att studera förbränningsegenskaperna hos några fasta restprodukter som uppstår vid framställning av förnybara fordonsbränslen. De fyra undersökta materialen är rapskaka, palmkärnskaka, torkad drank och stabiliserat rötslam. I studien används ett stort urval av undersökningsmetoder, från laboratorieskala till fullskalig förbränning, för att identifiera de huvudsakliga utmaningarna förknippade med förbränning av restprodukterna i pannor med fluidiserad bäddteknik. Med hjälp av detaljerad bränslekarakterisering kunde restprodukterna konstateras vara en värdefull källa för värme- och elproduktion. Den kemiska sammansättningen av restprodukterna varierar stort jämfört med mera traditionellt använda biobränslen. En gemensam faktor för alla de studerade restprodukterna är en hög fosforhalt. På grund av de låga fosforkoncentrationerna i de traditionella biobränslena har grundämnet hittills inte ansetts spela någon större roll i askkemin. Experimenten visade nu att fosfor inte mera kan försummas då man studerar kemin i förbränningsprocesser, då allt flera fosforrika bränslen tränger in på energimarknaden.
Experimental evaluation of the performance of a wireless sensor network in agricultural environments
Resumo:
The aim of this study was to perform an experimental study to evaluate the proper operation distance between the nodes of a wireless sensor network available on the market for different agricultural crops (maize, physic nut, eucalyptus). The experimental data of the network performance offers to farmers and researchers information that might be useful to the sizing and project of the wireless sensor networks in similar situations to those studied. The evaluation showed that the separation of the nodes depends on the type of culture and it is a critical factor to ensure the feasibility of using WSN. In the configuration used, sending packets every 2 seconds, the battery life was about four days. Therefore, the autonomy may be increased with a longer interval of time between sending packets.
Resumo:
The aim of this study was to develop a an automated bench top electronic penetrometer (ABEP) that allows performing tests with high rate of data acquisition (up to 19,600 Hz) and with variation of the displacement velocity and of the base area of cone penetration. The mechanical components of the ABEP are: a supporting structure, stepper motor, velocity reducer, double nut ball screw and six penetration probes. The electronic components of ABEP are: a "driver" to control rotation and displacement, power supply, three load cells, two software programs for running and storing data, and a data acquisition module. This penetrometer presented in compact size, portable and in 32 validation tests it proved easy to operate, and showed high resolution, high velocity in reliability in data collection. During the validation tests the equipment met the objectives, because the test results showed that the ABEP could use different sizes of cones, allowed work at different velocities, showed for velocity and displacement, were only 1.3% and 0.7%, respectively, at the highest velocity (30 mm s-1) and 1% and 0.9%, respectively for the lowest velocity (0.1 mm s-1).
Resumo:
The Brazil-nut, also known as Para-nut, is widely used as food and in cosmetic industries. The seeds are rich in lipids and protein, and also present a considerable amount of selenium. Limited research has been conducted on postharvest of the Brazil nut, being an important information to design equipment related to aeration, drying, storage and transportation steps. Thus, the objective of this study was to determine the physical properties of the Brazil-nut with and without tegument. The dimensions found for the almonds with tegument were 39.35 mm in the X axis, 24.19 mm in the Y axis, and 17.88 mm in the Z axis. However for the almond without tegument the values were 31.05 mm in X, 14.38 in Y and 15.91 mm in Z axis. The sphericity was 66.40% and 51.59% for the kernels with and without seed tegument respectively. The kernels with and without tegument presented sphericity of 63.00% and 47.72% respectively. The mass of 1000 almonds was 6.13 kg for almond with teguments and 3.18 kg for almonds without teguments. Specific mass of 0.947 g.cm-3 and 1.003 g.cm-3 for the kernels with and without tegument, coupled with a porosity of 46.88% and 37.60% and, resulting on a bulk density of 0.504 g.cm-3 and 0.626 g.cm-3 for almonds with and without teguments respectively. Finally, the angle of repose for the kernels with teguments was 36.37°.
Resumo:
ABSTRACT Seedling quality is crucial to obtain vigorous plants in the field. This study aims to evaluate the emergence and development of soursop seedlings in different substrates in protected environments. The experiment was conducted at the Mato Grosso do Sul State University and carried out using five protected environments: greenhouse, greenhouse with thermo-reflective screen, nursery with monofilament screen, nursery with thermo-reflective screen, and nursery with palm thatch. The substrates (S) consisted of cattle manure (M), humus (H), cassava branches (C), and vermiculite (V) as in the following ratios: S1 = H + V (1:3), S2 = H + V (1:1), S3 = H + V (3:1), S4 = H + C (1:3), S5 = H + C (1:1), S6 = H + C (3:1), S7 = M + V (1:3), S8 = M + V (1:1), S9 = M + V (3:1), S10 = M + C (1:3), S11 = M + C (1:1), S12 = M + C (3:1), S13 = H + M + V (1:1:1), S14 = H + M + C (1:1:1), and S15 = H + M + V + C (1:1:1:1). For the statistical analysis, each of those environments was considered as an experiment in which was used the completely randomized design; subsequently, it was performed a combined analysis of them. In summary, the greenhouse with thermo-reflective screen and combined substrates with “M + V” promote greater development of the seedlings. High concentrations of “V” or “C” cause no beneficial effect on soursop seedlings.