An evaluation of new parsimony-based versus parametric inference methods in biogeography: a case study using the globally distributed plant family Sapindaceae

Aim  Recently developed parametric methods in historical biogeography allow researchers to integrate temporal and palaeogeographical information into the reconstruction of biogeographical scenarios, thus overcoming a known bias of parsimony-based approaches. Here, we compare a parametric method, dispersal-extinction-cladogenesis (DEC), against a parsimony-based method, dispersal-vicariance analysis (DIVA), which does not incorporate branch lengths but accounts for phylogenetic uncertainty through a Bayesian empirical approach (Bayes-DIVA). We analyse the benefits and limitations of each method using the cosmopolitan plant family Sapindaceae as a case study.Location  World-wide.Methods  Phylogenetic relationships were estimated by Bayesian inference on a large dataset representing generic diversity within Sapindaceae. Lineage divergence times were estimated by penalized likelihood over a sample of trees from the posterior distribution of the phylogeny to account for dating uncertainty in biogeographical reconstructions. We compared biogeographical scenarios between Bayes-DIVA and two different DEC models: one with no geological constraints and another that employed a stratified palaeogeographical model in which dispersal rates were scaled according to area connectivity across four time slices, reflecting the changing continental configuration over the last 110 million years.Results  Despite differences in the underlying biogeographical model, Bayes-DIVA and DEC inferred similar biogeographical scenarios. The main differences were: (1) in the timing of dispersal events - which in Bayes-DIVA sometimes conflicts with palaeogeographical information, and (2) in the lower frequency of terminal dispersal events inferred by DEC. Uncertainty in divergence time estimations influenced both the inference of ancestral ranges and the decisiveness with which an area can be assigned to a node.Main conclusions  By considering lineage divergence times, the DEC method gives more accurate reconstructions that are in agreement with palaeogeographical evidence. In contrast, Bayes-DIVA showed the highest decisiveness in unequivocally reconstructing ancestral ranges, probably reflecting its ability to integrate phylogenetic uncertainty. Care should be taken in defining the palaeogeographical model in DEC because of the possibility of overestimating the frequency of extinction events, or of inferring ancestral ranges that are outside the extant species ranges, owing to dispersal constraints enforced by the model. The wide-spanning spatial and temporal model proposed here could prove useful for testing large-scale biogeographical patterns in plants.

Rehabilitation of Concrete Pavements Utilizing Rebblization and Crack and Seat Methods, June 2005

Deterioration in portland cement concrete (PCC) pavements can occur due to distresses caused by a combination of traffic loads and weather conditions. Hot mix asphalt (HMA) overlay is the most commonly used rehabilitation technique for such deteriorated PCC pavements. However, the performance of these HMA overlaid pavements is hindered due to the occurrence of reflective cracking, resulting in significant reduction of pavement serviceability. Various fractured slab techniques, including rubblization, crack and seat, and break and seat are used to minimize reflective cracking by reducing the slab action. However, the design of structural overlay thickness for cracked and seated and rubblized pavements is difficult as the resulting structure is neither a “true” rigid pavement nor a “true” flexible pavement. Existing design methodologies use the empirical procedures based on the AASHO Road Test conducted in 1961. But, the AASHO Road Test did not employ any fractured slab technique, and there are numerous limitations associated with extrapolating its results to HMA overlay thickness design for fractured PCC pavements. The main objective of this project is to develop a mechanistic-empirical (ME) design approach for the HMA overlay thickness design for fractured PCC pavements. In this design procedure, failure criteria such as the tensile strain at the bottom of HMA layer and the vertical compressive strain on the surface of subgrade are used to consider HMA fatigue and subgrade rutting, respectively. The developed ME design system is also implemented in a Visual Basic computer program. A partial validation of the design method with reference to an instrumented trial project (IA-141, Polk County) in Iowa is provided in this report. Tensile strain values at the bottom of the HMA layer collected from the FWD testing at this project site are in agreement with the results obtained from the developed computer program.

Optimisation des doses en tomographie computérisée pédiatrique [Patient dose optimization in pediatric computerized tomography]

The development of CT applications might become a public health problem if no effort is made on the justification and the optimisation of the examinations. This paper presents some hints to assure that the risk-benefit compromise remains in favour of the patient, especially when one deals with the examinations of young patients. In this context a particular attention has to be made on the justification of the examination. When performing the acquisition one needs to optimise the extension of the volume investigated together with the number of acquisition sequences used. Finally, the use of automatic exposure systems, now available on all the units, and the use of the Diagnostic Reference Levels (DRL) should allow help radiologists to control the exposure of their patients.

Evaluation of Transverse Joint Forming Methods for PCC Pavement, January 2006

The members of the Iowa Concrete Paving Association, the National Concrete Pavement Technology Center Research Committee, and the Iowa Highway Research Board commissioned a study to examine alternative ways of developing transverse joints in portland cement concrete pavements. The present study investigated six separate variations of vertical metal strips placed above and below the dowels in conventional baskets. In addition, the study investigated existing patented assemblies and a new assembly developed in Spain and used in Australia. The metal assemblies were placed in a new pavement and allowed to stay in place for 30 days before the Iowa Department of Transportation staff terminated the test by directing the contractor to saw and seal the joints. This report describes the design, construction, testing, and conclusions of the project.

Evaluation of U.S. and European Concrete Pavement Noise Reduction Methods, July 2006

Highway noise is one of the most pressing of the surface characteristics issues facing the concrete paving industry. This is particularly true in urban areas, where not only is there a higher population density near major thoroughfares, but also a greater volume of commuter traffic (Sandberg and Ejsmont 2002; van Keulen 2004). To help address this issue, the National Concrete Pavement Technology Center (CP Tech Center) at Iowa State University (ISU), Federal Highway Administration (FHWA), American Concrete Pavement Association (ACPA), and other organizations have partnered to conduct a multi-part, seven-year Concrete Pavement Surface Characteristics Project. This document contains the results of Part 1, Task 2, of the ISU-FHWA project, addressing the noise issue by evaluating conventional and innovative concrete pavement noise reduction methods. The first objective of this task was to determine what if any concrete surface textures currently constructed in the United States or Europe were considered quiet, had long-term friction characteristics, could be consistently built, and were cost effective. Any specifications of such concrete textures would be included in this report. The second objective was to determine whether any promising new concrete pavement surfaces to control tire-pavement noise and friction were in the development stage and, if so, what further research was necessary. The final objective was to identify measurement techniques used in the evaluation.

Integrative Review: Concepts And Methods Used In Nursing


Integrative review (IR) has an international reputation in nursing research and evidence-based practice. This IR aimed at identifying and analyzing the concepts and methods recommended to undertaking IR in nursing. Nine information resources,including electronic databases and grey literature were searched. Seventeen studies were included. The results indicate that: primary studies were mostly from USA; it is possible to have several research questions or hypotheses and include primary studies in the review from different theoretical and methodological approaches; it is a type of review that can go beyond the analysis and synthesis of findings from primary studies allowing exploiting other research dimensions, and that presents potentialities for the development of new theories and new problems for research. Conclusion: IR is understood as a very complex type of review and it is expected to be developed using standardized and systematic methods to ensure the required rigor of scientific research and therefore the legitimacy of the established evidence.


Pharmacokinetic and pharmacogenetic factors influencing plasma and cellular antiretroviral drug disposition

Abstract: The improvement in antiretroviral drug therapy has transformed HIV infection into a chronic disease. However, treatment failure and drug toxicity are frequent. Inadequate response to treatment is clearly multifactorial and, therefore, dosage individualisation based on demographic factors, genetic markers and measurement of cellular and plasma drug level may enhance both drug efficacy and tolerability. At present, antiretroviral drugs levels are monitored in plasma, whereas only drugs penetrating into cells are able to exert an antiviral activity, suggesting that cellular drug determination may more confidently reflect drug exposure at the site of pharmacological action. The overall objective of this thesis is to provide a better understanding of the Pharmacokinetic and pharmacogenetic factors influencing the plasma and cellular disposition of antiretroviral drugs. To that endeavour, analytical methods for the measurements of plasma and cellular drug levels have been developed and validated using liquid chromatography methods coupled with ultraviolet and tandem mass spectrometry detection, respectively. Correlations between plasma and cellular exposures were assessed during observational and experimental studies. Cytochrome (CYP) 2B6, efflux transporters (ABCB1, ABCC1, ABCC2 and ABCG2) and orosomucoid (ORM) polymorphisms were determined and were related to plasma and cellular exposures, as well as toxicity of antiretroviral drugs. A Pharmacokinetic population model was developed to characterise inter- and intra-patient variability of atazanavir pharmacokinetics, and to identify covariates influencing drug disposition. In that context, a Pharmacokinetic interaction study between atazanavir and lopinavir, both boosted with ritonavir, has beén conducted to assess the safety and pharmacokinetics of this boosted double-protease inhibitors regimen. Well to moderately-correlated cellular and plasma drug levels are .observed or protease inhibitors, whereas for efavirenz and nevirapine these correlations are weak. Cellular exposure, and CYP2B6 genotype (516G>T) are predictors of efavirenz neuropsychological toxicity. Nevirapine plasma exposure is also influenced by CYPZB6 polymorphism. Nelfinavir cellular exposure appears to be significantly associated only with ABCB1 genotype (3435C>T and intron 26 + 80T>C). Indinavir and lopinavir clearance and lopinavir cellular/plasma exposure ratio are influenced by the concentration of the variant S of ORM, suggesting-a specific binding of these drugs to this variant. Nelfinavir and efavirenz are not influenced by ORM concentration and phenotype. The Pharmacokinetic parameters of atazanavir are adequately described by our population model. The atazanavir-lopinavir interaction study indicates no influence on plasma and cellular atazanavir pharmacokinetics, while limited decrease in lopinavir concentrations was observed after atazanavir addition. The residual variability unexplained by the considered variables suggests that other covariates either uncontrolled at present or remaining to be identified, such as genetic and environmental factors influence antiretroviral drug pharmacokinetics, with substantial impact on treatment efficacy and tolerability. In that context, a comprehensive approach taking into account drug pharmacokinetics and patient genetic background is expected to contribute to increase treatment success, and to reduce the occurrence of adverse drug reactions by stratifying patients in an individualised antiretroviral therapy approach. Résumé Facteurs pharmacocinétiques et pharmacogénétiques influençant l'exposition plasmatique et cellulaire des antirétroviraux Les progrès de la thérapie antirétrovirale ont transformé l'infection par le VIH d'une affection mortelle à une maladie chronique. En dépit de ce succès, l'échec thérapeutique et la toxicité médicamenteuse restent fréquents. Une réponse inadéquate au traitement est clairement multifactorielle et une individualisation de la posologie des médicaments qui se baserait sur les facteurs démographiques et génétiques des patients et sur les taux sanguins des médicaments pourrait améliorer à la fois l'efficacité et la tolérance de la thérapie. Par ailleurs, seules les concentrations plasmatiques sont actuellement considérées pour le suivi thérapeutique des médicaments, alors que les taux cellulaires pourraient mieux refléter l'activité de ses médicaments qui agissent au niveau intracellulaire. L'objectif global de cette thèse était de mieux comprendre les facteurs pharmacocinétiques et pharmacocénétiques influençant l'exposition plasmatique et cellulaire des médicaments antirétroviraux. A cet effet, des méthodes pour quantifier les concentrations plasmatiques et cellulaires des antirétroviraux ont été développées et validées en utilisant la chromatographie liquide couplée à la détection ultraviolette et la spectrométrie de masse en tandem, respectivement. La corrélation entre l'exposition cellulaire et plasmatique de ces médicaments a été étudiée lors d'études observationnelles et expérimentales. Les polymorphismes du cytochrome (CYP) 2B6, ainsi que des transporteurs d'efflux (ABCB1, ABCC1, ABCC2 et ABCG2) et de l'orosomucoïde (ORM) ont été déterminés et corrélés avec l'exposition plasmatique et cellulaire des antirétroviraux, ainsi qu'à leur toxicité. Un modèle de pharmacocinétique de population a été établi afin de caractériser la variabilité inter- et intra-individuelle de l'atazanavir, et d'identifier les covariables pouvant influencer le devenir de ce médicament. Dans ce contexte, une étude d'interaction entre l'atazanavir et le lopinavir a été effectuée afin de déterminer la sécurité et le profil pharmacocinétique de ce régime thérapeutique. Des corrélations modérées à bonnes ont été observées entre les taux cellulaires et plasmatiques des inhibiteurs de protéase, alors que pour l'efavirenz et la névirapine ces corrélations sont faibles. L'exposition cellulaire, ainsi que le génotype du CYP2B6 (516G>T) sont des indices de la toxicité neuropsychologique de l'efavirenz. L'exposition plasmatique de la névirapine est également influencée par le polymorphisme du CYPZB6. L'exposition cellulaire du nelfinavir est significativement associée au génotype du ABCB1 (3435C>T et intron 26 + 80T>C). La clairance de l'indinavir et du lopinavir, ainsi que le rapport entre exposition cellulaire et plasmatique du lopinavir sont influencés par la concentration du variant S de l'ORM, suggérant une liaison spécifique de ces médicaments à ce variant. La clairance du nelfinavir et de l'efavirenz n'est pas influencée ni par la concentration ni par le phénotype de l'ORM. Les paramètres pharmacocinétiques de l'atazanavir ont été décrits de façon adéquate par le modèle de population proposé. De plus, le lopinavir n'influence pas les concentrations plasmatiques et cellulaires de l'atazanavir; alors que celui-ci conduit à une baisse limitée des taux de lopinavir. L'importante variabilité pharmacocinétique des antirétroviraux suggère que d'autres facteurs génétiques et environnementaux -qui restent encore à découvrir- influencent également leur disponibilité. Dans un proche futur, une prise en charge qui tienne. compte de la pharmacocinétique des médicaments et des caractéristiques génétiques du patient devrait permettre d'individualiser le traitement, contribuant certainement à une amélioration de la réponse thérapeutique et à une diminution de la toxicité. Résumé grand public Facteurs pharmacocinétiques et pharmacogénétiques influençant l'exposition plasmatique et cellulaire des antirétroviraux Les progrès effectués dans le traitement de l'infection par le virus de l'immunodéficience humaine acquise (VIH), ont permis de transformer une maladie avec un pronostic sombre, en une maladie chronique traitable avec des médicaments de plus en plus efficaces. Malgré ce succès, de nombreux patients ne répondent pas de façon optimale à leur traitement et/ou souffrent d'effets indésirables médicamenteux entraînant fréquemment une modification de leur thérapie. Actuellement, le suivi de la réponse au traitement s'effectue par la mesure chez les patients de la quantité de virus et du nombre des cellules immunitaires dans le sang, ainsi que par la concentration sanguine des médicaments administrés. Cependant, comme le virus se réplique à l'intérieur de la cellule, la mesure des concentrations médicamenteuses au niveau intracellulaire pourrait mieux refléter l'activité pharmacologique au site d'action. De plus, il a été possible de mettre en évidence la grande variabilité des concentrations plasmatiques de médicaments chez des patients prenant pourtant la même dose de médicament. Comme cette variabilité est notamment due à des facteurs génétiques qui sont susceptibles d'influencer la réponse au traitement antirétroviral, des analyses génétiques ont été également effectuées chez ces patients. Cette thèse a eu pour objectif de mieux comprendre les facteurs pharmacologiques et génétiques influençant l'activité et la toxicité des médicaments antirétroviraux afin de réduire la variabilité de la réponse thérapeutique. A cet effet, une méthode de dosage permettant la quantification des médicaments anti-HIV au niveau intracellulaire a été développée. Par ailleurs, nos études ont également porté .sur les variations génétiques influençant la quantité et l'activité des protéines impliquées dans le métabolisme et dans le transport des médicaments antirétroviraux. Enfin, les conséquences de ces variations sur la réponse clinique et la toxicité du traitement ont été évaluées. Nos études ont mis en évidence des associations significatives entre les variations génétiques considérées et la concentration sanguine, cellulaire et la toxicité de quelques médicaments antirétroviraux. La complémentarité des connaissances pharmacologiques, génétiques et virales pourrait aboutir à une stratégie globale permettant d'individualiser le traitement et la dose administrée, en fonction des caractéristiques propres de chaque patient. Cette approche pourrait contribuer à une optimisation du traitement antirétroviral dans la perspective d'une meilleure- efficacité thérapeutique à long terme et d'une diminution des effets indésirables rencontrés.

Use of flow cytometric methods for single-cell analysis in environmental microbiology

Flow cytometry (FCM) is emerging as an important tool in environmental microbiology. Although flow cytometry applications have to date largely been restricted to certain specialized fields of microbiology, such as the bacterial cell cycle and marine phytoplankton communities, technical advances in instrumentation and methodology are leading to its increased popularity and extending its range of applications. Here we will focus on a number of recent flow cytometry developments important for addressing questions in environmental microbiology. These include (i) the study of microbial physiology under environmentally relevant conditions, (ii) new methods to identify active microbial populations and to isolate previously uncultured microorganisms, and (iii) the development of high-throughput autofluorescence bioreporter assays

The molecular basis of social behavior: models, methods and advances.

Elucidating the molecular and neural basis of complex social behaviors such as communal living, division of labor and warfare requires model organisms that exhibit these multi-faceted behavioral phenotypes. Social insects, such as ants, bees, wasps and termites, are attractive models to address this problem, with rich ecological and ethological foundations. However, their atypical systems of reproduction have hindered application of classical genetic approaches. In this review, we discuss how recent advances in social insect genomics, transcriptomics, and functional manipulations have enhanced our ability to observe and perturb gene expression, physiology and behavior in these species. Such developments begin to provide an integrated view of the molecular and cellular underpinnings of complex social behavior.

The achievable region approach to the optimal control of stochastic systems

The achievable region approach seeks solutions to stochastic optimisation problems by: (i) characterising the space of all possible performances(the achievable region) of the system of interest, and (ii) optimisingthe overall system-wide performance objective over this space. This isradically different from conventional formulations based on dynamicprogramming. The approach is explained with reference to a simpletwo-class queueing system. Powerful new methodologies due to the authorsand co-workers are deployed to analyse a general multiclass queueingsystem with parallel servers and then to develop an approach to optimalload distribution across a network of interconnected stations. Finally,the approach is used for the first time to analyse a class of intensitycontrol problems.

Mapping of Environmental Data Using Kernel-Based Methods

Recently, kernel-based Machine Learning methods have gained great popularity in many data analysis and data mining fields: pattern recognition, biocomputing, speech and vision, engineering, remote sensing etc. The paper describes the use of kernel methods to approach the processing of large datasets from environmental monitoring networks. Several typical problems of the environmental sciences and their solutions provided by kernel-based methods are considered: classification of categorical data (soil type classification), mapping of environmental and pollution continuous information (pollution of soil by radionuclides), mapping with auxiliary information (climatic data from Aral Sea region). The promising developments, such as automatic emergency hot spot detection and monitoring network optimization are discussed as well.