Aplicación web para la gestión de tareas siguiendo la metodología GTD

[ES] El Trabajo Final de Grado tiene por finalidad ofrecer una solución que ayude a las personas a gestionar sus tareas tanto personales como empresariales de una manera más productiva. Actualmente este tipo de aplicaciones tienen mucho éxito. Se decidió que el desarrollo de esta aplicación fuera con la metodología Getting Things Done (GTD) ya que es una metodología que aumenta la productividad y reduce el estrés laboral. A día de hoy, no hay muchas aplicaciones que utilice esta metodología y las que la utilizan lo hace de una forma muy básica. Junto a esta metodología y guiándonos de la experiencia del tutor se intentó combinar esta metodología con controles de tiempo para mejorar aún más la productividad de las personas que utiliza dicho software. El resultado obtenido de este trabajo final de grado fue la base de una aplicación web para la gestión de tareas. El software creado es totalmente funcional, muy fácil de usar, muy intuitivo, y usa la filosofía Getting Things Done . Básicamente los objetivos principales conseguidos en este proyecto fueron: la gestión de usuarios. La gestión de tareas y proyectos. Aplicación de la metodología GTD. Control del tiempo productivo, e improductivo, interrupciones, temporizadores. La aplicación ha sido realizada como Trabajo Final de Grado en Ingeniería Informática, cumpliendo con todas las fases del desarrollo del software, para obtener un producto funcional que fuera aprobado por el tutor que haría el rol de potencial cliente. En el presente proyecto se ha seguido la metodología RUP, dirigida por casos de uso, iterativa e incremental. Para completar el proceso se ha realizado la elaboración de una lista de características, la especificación de los casos de uso, una fase de análisis, una de diseño, implementación y prueba. Las tecnologías utilizadas han sido, principalmente, Ruby On Rails, HTML5, CSS , AJAX y JAVASCRIPT. El objetivo a largo plazo es que esta solución pueda ser tomada como base de implementación, donde haciendo las mejoras necesarias se pueda poner en el mercado un gran software de gestión de tareas siguiendo la metodología GTD.

Aplicación web para Ayuntamiento de Las Palmas de Gran Canaria : [Parte A]

[ES] Este Trabajo de Fin de Grado es un servicio basado en tecnologías web (PHP, HTML5, CSS, JQUERY y AJAX). El objetivo principal es ofrecer un servicio de creación y gestión de actas para el Ayuntamiento de Las Palmas de Gran Canaria. Para ello, consta de dos módulos principales, uno para “crear actas” y otro para “editar actas”. La aplicación consta de dos partes. Una primera parte desarrollada por mí, que consiste en primer lugar en todas las reuniones que fueron necesarias con el personal del Ayuntamiento de Las Palmas de Gran Canaria para entender sus necesidades y cómo poder afrontarlas como desarrollador. Y en segundo lugar, me he encargado de la elaboración y la estructura de la página web, mediante la generación de los distintos ficheros con contenido  HTML, en la interconexión de estos ficheros y en el paso de parámetros entre dichos ficheros mediante las distintas herramientas (JQUERY, AJAX), así como también he dotado a la web de todo el contenido JavaScript necesario. En este apartado también se encuentra la tarea de realizar un módulo de búsqueda y un módulo para mostrar las actas ya acabadas. El de búsqueda contiene un formulario con un campo de búsqueda y busca las coincidencias dentro de todos los ficheros que se han generado con la aplicación. También muestra un link para abrir ese fichero desde el navegador. Como aportación adicional también me he encargado de la configuración y generación de las tablas necesarias de la base de datos para el funcionamiento de la aplicación.

Rich media content adaptation in e-learning systems

The wide use of e-technologies represents a great opportunity for underserved segments of the population, especially with the aim of reintegrating excluded individuals back into society through education. This is particularly true for people with different types of disabilities who may have difficulties while attending traditional on-site learning programs that are typically based on printed learning resources. The creation and provision of accessible e-learning contents may therefore become a key factor in enabling people with different access needs to enjoy quality learning experiences and services. Another e-learning challenge is represented by m-learning (which stands for mobile learning), which is emerging as a consequence of mobile terminals diffusion and provides the opportunity to browse didactical materials everywhere, outside places that are traditionally devoted to education. Both such situations share the need to access materials in limited conditions and collide with the growing use of rich media in didactical contents, which are designed to be enjoyed without any restriction. Nowadays, Web-based teaching makes great use of multimedia technologies, ranging from Flash animations to prerecorded video-lectures. Rich media in e-learning can offer significant potential in enhancing the learning environment, through helping to increase access to education, enhance the learning experience and support multiple learning styles. Moreover, they can often be used to improve the structure of Web-based courses. These highly variegated and structured contents may significantly improve the quality and the effectiveness of educational activities for learners. For example, rich media contents allow us to describe complex concepts and process flows. Audio and video elements may be utilized to add a “human touch” to distance-learning courses. Finally, real lectures may be recorded and distributed to integrate or enrich on line materials. A confirmation of the advantages of these approaches can be seen in the exponential growth of video-lecture availability on the net, due to the ease of recording and delivering activities which take place in a traditional classroom. Furthermore, the wide use of assistive technologies for learners with disabilities injects new life into e-learning systems. E-learning allows distance and flexible educational activities, thus helping disabled learners to access resources which would otherwise present significant barriers for them. For instance, students with visual impairments have difficulties in reading traditional visual materials, deaf learners have trouble in following traditional (spoken) lectures, people with motion disabilities have problems in attending on-site programs. As already mentioned, the use of wireless technologies and pervasive computing may really enhance the educational learner experience by offering mobile e-learning services that can be accessed by handheld devices. This new paradigm of educational content distribution maximizes the benefits for learners since it enables users to overcome constraints imposed by the surrounding environment. While certainly helpful for users without disabilities, we believe that the use of newmobile technologies may also become a fundamental tool for impaired learners, since it frees them from sitting in front of a PC. In this way, educational activities can be enjoyed by all the users, without hindrance, thus increasing the social inclusion of non-typical learners. While the provision of fully accessible and portable video-lectures may be extremely useful for students, it is widely recognized that structuring and managing rich media contents for mobile learning services are complex and expensive tasks. Indeed, major difficulties originate from the basic need to provide a textual equivalent for each media resource composing a rich media Learning Object (LO). Moreover, tests need to be carried out to establish whether a given LO is fully accessible to all kinds of learners. Unfortunately, both these tasks are truly time-consuming processes, depending on the type of contents the teacher is writing and on the authoring tool he/she is using. Due to these difficulties, online LOs are often distributed as partially accessible or totally inaccessible content. Bearing this in mind, this thesis aims to discuss the key issues of a system we have developed to deliver accessible, customized or nomadic learning experiences to learners with different access needs and skills. To reduce the risk of excluding users with particular access capabilities, our system exploits Learning Objects (LOs) which are dynamically adapted and transcoded based on the specific needs of non-typical users and on the barriers that they can encounter in the environment. The basic idea is to dynamically adapt contents, by selecting them from a set of media resources packaged in SCORM-compliant LOs and stored in a self-adapting format. The system schedules and orchestrates a set of transcoding processes based on specific learner needs, so as to produce a customized LO that can be fully enjoyed by any (impaired or mobile) student.

A new method for T-spline parameterization of complex 2D geometries

[EN]We present a new strategy, based on the idea of the meccano method and a novel T-mesh optimization procedure, to construct a T-spline parameterization of 2D geometries for the application of isogeometric analysis. The proposed method only demands a boundary representation of the geometry as input data. The algorithm obtains, as a result, high quality parametric transformation between 2D objects and the parametric domain, the unit square. First, we define a parametric mapping between the input boundary of the object and the boundary of the parametric domain. Then, we build a T-mesh adapted to the geometric singularities of the domain in order to preserve the features of the object boundary with a desired tolerance...

Advances on T-spline parameterization based on the meccano method

[EN]We have recently introduced a new strategy, based on the meccano method [1, 2], to construct a T-spline parameterization of 2D and 3D geometries for the application of iso geometric analysis [3, 4]. The proposed method only demands a boundary representation of the geometry as input data. The algorithm obtains, as a result, high quality parametric transformation between the objects and the parametric domain, i.e. the meccano. The key of the method lies in de_ning an isomorphic transformation between the parametric and physical T-mesh _nding the optimal position of the interior nodes, once the meccano boundary nodes are mapped to the boundary of the physical domain…

Design and Performance Evaluation of Network-on-Chip Communication Protocols and Architectures

The scale down of transistor technology allows microelectronics manufacturers such as Intel and IBM to build always more sophisticated systems on a single microchip. The classical interconnection solutions based on shared buses or direct connections between the modules of the chip are becoming obsolete as they struggle to sustain the increasing tight bandwidth and latency constraints that these systems demand. The most promising solution for the future chip interconnects are the Networks on Chip (NoC). NoCs are network composed by routers and channels used to inter- connect the different components installed on the single microchip. Examples of advanced processors based on NoC interconnects are the IBM Cell processor, composed by eight CPUs that is installed on the Sony Playstation III and the Intel Teraflops pro ject composed by 80 independent (simple) microprocessors. On chip integration is becoming popular not only in the Chip Multi Processor (CMP) research area but also in the wider and more heterogeneous world of Systems on Chip (SoC). SoC comprehend all the electronic devices that surround us such as cell-phones, smart-phones, house embedded systems, automotive systems, set-top boxes etc... SoC manufacturers such as ST Microelectronics , Samsung, Philips and also Universities such as Bologna University, M.I.T., Berkeley and more are all proposing proprietary frameworks based on NoC interconnects. These frameworks help engineers in the switch of design methodology and speed up the development of new NoC-based systems on chip. In this Thesis we propose an introduction of CMP and SoC interconnection networks. Then focusing on SoC systems we propose: • a detailed analysis based on simulation of the Spidergon NoC, a ST Microelectronics solution for SoC interconnects. The Spidergon NoC differs from many classical solutions inherited from the parallel computing world. Here we propose a detailed analysis of this NoC topology and routing algorithms. Furthermore we propose aEqualized a new routing algorithm designed to optimize the use of the resources of the network while also increasing its performance; • a methodology flow based on modified publicly available tools that combined can be used to design, model and analyze any kind of System on Chip; • a detailed analysis of a ST Microelectronics-proprietary transport-level protocol that the author of this Thesis helped developing; • a simulation-based comprehensive comparison of different network interface designs proposed by the author and the researchers at AST lab, in order to integrate shared-memory and message-passing based components on a single System on Chip; • a powerful and flexible solution to address the time closure exception issue in the design of synchronous Networks on Chip. Our solution is based on relay stations repeaters and allows to reduce the power and area demands of NoC interconnects while also reducing its buffer needs; • a solution to simplify the design of the NoC by also increasing their performance and reducing their power and area consumption. We propose to replace complex and slow virtual channel-based routers with multiple and flexible small Multi Plane ones. This solution allows us to reduce the area and power dissipation of any NoC while also increasing its performance especially when the resources are reduced. This Thesis has been written in collaboration with the Advanced System Technology laboratory in Grenoble France, and the Computer Science Department at Columbia University in the city of New York.

Architectures for Context Aware Services in Smart Environments

This thesis deals with Context Aware Services, Smart Environments, Context Management and solutions for Devices and Service Interoperability. Multi-vendor devices offer an increasing number of services and end-user applications that base their value on the ability to exploit the information originating from the surrounding environment by means of an increasing number of embedded sensors, e.g. GPS, compass, RFID readers, cameras and so on. However, usually such devices are not able to exchange information because of the lack of a shared data storage and common information exchange methods. A large number of standards and domain specific building blocks are available and are heavily used in today's products. However, the use of these solutions based on ready-to-use modules is not without problems. The integration and cooperation of different kinds of modules can be daunting because of growing complexity and dependency. In this scenarios it might be interesting to have an infrastructure that makes the coexistence of multi-vendor devices easy, while enabling low cost development and smooth access to services. This sort of technologies glue should reduce both software and hardware integration costs by removing the trouble of interoperability. The result should also lead to faster and simplified design, development and, deployment of cross-domain applications. This thesis is mainly focused on SW architectures supporting context aware service providers especially on the following subjects: - user preferences service adaptation - context management - content management - information interoperability - multivendor device interoperability - communication and connectivity interoperability Experimental activities were carried out in several domains including Cultural Heritage, indoor and personal smart spaces – all of which are considered significant test-beds in Context Aware Computing. The work evolved within european and national projects: on the europen side, I carried out my research activity within EPOCH, the FP6 Network of Excellence on “Processing Open Cultural Heritage” and within SOFIA, a project of the ARTEMIS JU on embedded systems. I worked in cooperation with several international establishments, including the University of Kent, VTT (the Technical Reserarch Center of Finland) and Eurotech. On the national side I contributed to a one-to-one research contract between ARCES and Telecom Italia. The first part of the thesis is focused on problem statement and related work and addresses interoperability issues and related architecture components. The second part is focused on specific architectures and frameworks: - MobiComp: a context management framework that I used in cultural heritage applications - CAB: a context, preference and profile based application broker which I designed within EPOCH Network of Excellence - M3: "Semantic Web based" information sharing infrastructure for smart spaces designed by Nokia within the European project SOFIA - NoTa: a service and transport independent connectivity framework - OSGi: the well known Java based service support framework The final section is dedicated to the middleware, the tools and, the SW agents developed during my Doctorate time to support context-aware services in smart environments.

Inference on copula-based correlation structures

We propose an extension of the approach provided by Kluppelberg and Kuhn (2009) for inference on second-order structure moments. As in Kluppelberg and Kuhn (2009) we adopt a copula-based approach instead of assuming normal distribution for the variables, thus relaxing the equality in distribution assumption. A new copula-based estimator for structure moments is investigated. The methodology provided by Kluppelberg and Kuhn (2009) is also extended considering the copulas associated with the family of Eyraud-Farlie-Gumbel-Morgenstern distribution functions (Kotz, Balakrishnan, and Johnson, 2000, Equation 44.73). Finally, a comprehensive simulation study and an application to real financial data are performed in order to compare the different approaches.

Physical models for numerical simulation of Si-based nanoscale FETs and sensors

To continuously improve the performance of metal-oxide-semiconductor field-effect-transistors (MOSFETs), innovative device architectures, gate stack engineering and mobility enhancement techniques are under investigation. In this framework, new physics-based models for Technology Computer-Aided-Design (TCAD) simulation tools are needed to accurately predict the performance of upcoming nanoscale devices and to provide guidelines for their optimization. In this thesis, advanced physically-based mobility models for ultrathin body (UTB) devices with either planar or vertical architectures such as single-gate silicon-on-insulator (SOI) field-effect transistors (FETs), double-gate FETs, FinFETs and silicon nanowire FETs, integrating strain technology and high-κ gate stacks are presented. The effective mobility of the two-dimensional electron/hole gas in a UTB FETs channel is calculated taking into account its tensorial nature and the quantization effects. All the scattering events relevant for thin silicon films and for high-κ dielectrics and metal gates have been addressed and modeled for UTB FETs on differently oriented substrates. The effects of mechanical stress on (100) and (110) silicon band structures have been modeled for a generic stress configuration. Performance will also derive from heterogeneity, coming from the increasing diversity of functions integrated on complementary metal-oxide-semiconductor (CMOS) platforms. For example, new architectural concepts are of interest not only to extend the FET scaling process, but also to develop innovative sensor applications. Benefiting from properties like large surface-to-volume ratio and extreme sensitivity to surface modifications, silicon-nanowire-based sensors are gaining special attention in research. In this thesis, a comprehensive analysis of the physical effects playing a role in the detection of gas molecules is carried out by TCAD simulations combined with interface characterization techniques. The complex interaction of charge transport in silicon nanowires of different dimensions with interface trap states and remote charges is addressed to correctly reproduce experimental results of recently fabricated gas nanosensors.

Un applicativo Web con tecnologia single-page AJAX, servizi REST e grafica X3D, per la configurazione di modelli CAD tridimensionali

In questa tesi è stato realizzato un sistema web-based, per la configurazione di modelli meccanici tridimensionali. L’intero software è basato su architettura multi-tier. Il back-end espone servizi RESTful che permettono l’interrogazione di una base di dati contenente l’anagrafica dei modelli e l’interazione con il CAD 3D SolidWorks. Il front-end è rappresentato da due pagine HTML ideate come SPA (Single Page Application), una per l’amministratore e l’altra per l’utente finale; esse sono responsabili delle chiamate asincrone verso i servizi, dell’aggiornamento automatico dell’interfaccia e dell’interazione con immagini tridimensionali.

Progettazione di un'applicazione web-oriented per la gestione di un sistema informativo aziendale

L’azienda committente vuole ampliare la possibilità di accedere al suo database, sia dall’esterno che dall’interno, non solamente da parte di un unico utente amministratore, ma anche da tutti gli agenti distribuiti sul territorio nazionale e tutti gli impiegati degli uffici. Si vuole inoltre creare un sistema di notifiche via email che permetta a tutti gli utenti (agenti) registrati di avere in tempo reale informazioni sempre aggiornate riguardo i propri clienti. La ditta si chiama Tropical Lane S.p.A. e vuole realizzare questo progetto per rendere maggiormente accessibili le informazioni per i propri agenti, distribuiti nelle varie regioni italiane, direttamente tramite un loro dispositivo mobile, come smartphone o tablet, senza dover necessariamente telefonare continuamente in ditta dove è presente una segretaria che svolge solamente questa mansione. In questo modo si cerca di velocizzare la procedura di accesso ai dati così da liberare una risorsa utile per lo svolgimento di altre funzioni interne. Si è deciso quindi di creare un sito web, basato su tecnologia Active Server Pages e interfacciato al database aziendale, che sia fruibile dall’esterno della rete aziendale e sul quale vengono mostrati i dati, organizzati in modo da essere facilmente comprensibili e visualizzabili da tutti. La realizzazione del sito è stata effettuata utilizzando notepad++ sia per le pagine ASP che per le poche pagine di HTML statico presenti. Gli script sono stati realizzati in linguaggio Javascript, compatibile con le specifiche dei browser più diffusi. Il sito è supportato da un unico database realizzato in precedenza con Microsoft SQL ed integrato.

Chitosan based hydrogels for transmucosal drug delivery

The aim of this thesis was the formulation of new chitosan based delivery systems for transmucosal drug administration. Transmucosal routes, such as buccal, vaginal and nasal routes, allow the circumvention of the hepatic first pass metabolism and avoid the gastrointestinal chemical and enzymatic degradations. Moreover, transmucosal drug administration can allow to avoid pain or discomfort caused by injections, when drugs are administered through parenteral routes, thus increasing patient compliance. On the other side, the major disadvantage of transmucosal drug administration is represented by the presence of biological fluids and mucus that can remove drug systems from the application site, thus reducing the contact time between drug and mucosa and consequently, decreasing drug bioavailability. For this reason, in this study, the investigation of chitosan delivery systems as mucoadhesive formulations able to increase drugs residence time and to improve their bioavailability, was taken into account. In the paper 1, buccal films based on chitosan-gelatin complexes were prepared and loaded with propranolol hydrochloride. The complexes were characterized and studied in order to evaluate their physical- chemical properties and their ability to release the drug and to allow its permeation through buccal mucosa. In the paper 2, vaginal inserts based on chitosan/alginate complexes were formulated for local delivery of chlorhexidine digluconate. Tests to evaluate the interaction between the polymers and to study drug release properties were performed, as well as the determination of antimicrobial activity against the patogens responsible of vaginitis and candidosis. In the project 3, chitosan based nanoparticles containing cyclodextrin and other excipients, with the capacity to modify insulin bioavailabity were formulated for insulin nasal delivery. Nanoparticles were characterized in terms of size, stability and drug release. Moreover, in vivo tests were performed in order to study the hypoglycemic reduction in rats blood samples.

Progettazione, implementazione e valutazione di un simulatore basato su web real time communication (WebRTC).

Questa tesi tratta della realizzazione e valutazione di un simulatore Web-Based i cui nodi sono connessi tramite Web Real Time Communication (WebRTC) e si testa la sua efficienza mediante la simulazione di un semplice modello di mobilità. Si espongono i principali concetti di simulazione e di WebRTC, fornendo le basi per una maggior comprensione del testo e delle scelte progettuali ed implementative. Si conclude con serie di test comparativi dell’applicativo mettendo in luce pregi e difetti di questo approccio alternativo alla simulazione.

Tailoring, synthesis and structure-property relationships of 2,3-thienoimide based molecular materials

Organic molecular semiconductors are subject of intense research for their crucial role as key components of new generation low cost, flexible, and large area electronic devices such as displays, thin-film transistors, solar cells, sensors and logic circuits. In particular, small molecular thienoimide (TI) based materials are emerging as novel multifunctional materials combining a good processability together to ambipolar or n-type charge transport and electroluminescence at the solid state, thus enabling the fabrication of integrated devices like organic field effect transistors (OFETs) and light emitting transistor (OLETs). Given this peculiar combination of characteristics, they also constitute the ideal substrates for fundamental studies on the structure-property relationships in multifunctional molecular systems. In this scenario, this thesis work is focused on the synthesis of new thienoimide based materials with tunable optical, packing, morphology, charge transport and electroluminescence properties by following a fine molecular tailoring, thus optimizing their performances in device as well as investigating and enabling new applications. Investigation on their structure-property relationships has been carried out and in particular, the effect of different π-conjugated cores (heterocycles, length) and alkyl end chain (shape, length) changes have been studied, obtaining materials with enhanced electron transport capability end electroluminescence suitable for the realization of OFETs and single layer OLETs. Moreover, control on the polymorphic behaviour characterizing thienoimide materials has been reached by synthetic and post-synthetic methodologies, developing multifunctional materials from a single polymorphic compound. Finally, with the aim of synthesizing highly pure materials, simplifying the purification steps and avoiding organometallic residues, procedures based on direct arylation reactions replacing conventional cross-couplings have been investigated and applied to different classes of molecules, bearing thienoimidic core or ends, as well as thiophene and anthracene derivatives, validating this approach as a clean alternative for the synthesis of several molecular materials.

Una applicazione web per l'analisi e la presentazione di dati relativi al mercato immobiliare italiano

Questa tesi è il risultato dell’attività di sviluppo di una applicazione Web per l’analisi e la presentazione di dati relativi al mercato immobiliare italiano, svolta presso l’azienda responsabile del portale immobiliare all’indirizzo www.affitto.it. L'azienda commissiona lo sviluppo di un sistema software che generi uno storico e descriva l'andamento del mercato immobiliare nazionale. In questa tesi verrà presentato il processo di sviluppo software che ha portato alla realizzazione del prodotto, che è costituito da un applicativo Web-based implementato col supporto di tecnologie quali PHP,HTML,MySQL,CSS.