810 resultados para mudança do uso da terra
Resumo:
O curso de Medicina Veterinária compõe-se essencialmente de aulas práticas e teóricas desenvolvidas pelas mais diversas disciplinas presentes em sua matriz curricular. Para que as aulas práticas, principalmente aquelas relacionadas às disciplinas profissionalizantes, possam ser ministradas, o curso deve apresentar um Hospital Escola. Este local tem como missões: o ensino (aulas práticas), a pesquisa (desenvolvimento de novas tecnologias e conhecimentos) e a extensão ou assistência (atendimento aos anseios e necessidades das comunidades onde está inserido). Apesar de estar inserido no contexto do curso, o hospital deve apresentar um controle, não só sob o ponto de vista financeiro, mas de acordo com suas premissas a fim de garantir tanto a satisfação das pessoas que ali trabalham e a continuidade de suas atividades, bem como permitir que seus clientes internos (os alunos) e externos (a comunidade) possam ser atendidos em suas necessidades. O termo controle predispõe um pensamento de comando, que tem como objetivo principal permitir que a organização cumpra com os seus objetivos. O processo de controle gerencial é o processo que os líderes encontram para assegurar que os outros membros da organização respeitem as estratégias determinadas. Instituições de saúde e ensino desenvolvem suas atividades através de seus centros de responsabilidades, que existem para cumprir suas finalidades. Como a organização é o conjunto de centro de responsabilidades, e se cada centro de responsabilidade cumpre com suas estratégias a própria organização atinge suas metas. Cabe ao gestor hospitalar decidir qual a estratégia a seguir congruindo com as premissas ou objetivos da organização. Esta decisão deve ser fundamentada em parâmetros e resultados que podem ser conseguidos através de ferramentas de decisão. Muitas organizações utilizam a avaliação do desempenho financeiro de seus centros de responsabilidade para tomar suas decisões. O presente trabalho é uma pesquisa ação, que propõe a apresentação de um modelo teórico, aqui representado por uma ferramenta de decisão que disponibilizará como indicadores de avaliação de desempenho as premissas de ensino, pesquisa e extensão, bem como as de cunho financeiro que permitirão ao gestor hospitalar decidir qual o foco ou caminho a seguir, auxiliando-o em situações de decisões administrativas. Foi realizada a comparação da classificação ou ranqueamento de cada um dos setores produtivos de acordo com o desempenho financeiro, neste caso, a margem de contribuição própria e seu ranqueamento após os cálculos apresentados pelo modelo proposto a fim de demonstrar que ocorreu mudança no ranqueamento dos setores. Este modelo baseou-se em uma ferramenta de hierarquização multicriterial. O fato mais importante foi de perceber que todos os setores produtivos tiveram seu ranqueamento modificado após os cálculos com a ferramenta apresentada. Assim, esta ferramenta torna-se uma forma de decisão mais abrangente, pois contempla outros critérios, ou neste caso, premissas importantes para a decisão, sendo muito útil também para identificar entre as premissas apresentadas quais foram as de pior desempenho em cada setor. Desta forma, o gestor pode determinar ações de melhorias, buscando metas que possam ser alcançadas e determinando aporte financeiro, sendo este o caso, para alcançá-las.(AU)
Resumo:
A clínica da Obesidade Mórbida e a Cirurgia Bariátrica exige estudos e acompanhamentos do paciente. Os benefícios e riscos do emagrecimento por tratamento cirúrgico devem servir como ponto de alerta aos profissionais da saúde. O uso do questionário no serviço de psicologia é norteado pela escuta psicológica. Objetivos: 1) Descrever o perfil sócio-demográfico candidatos à cirurgia bariátrica. 2) Analisar a percepção dos pacientes sobre características de personalidade associadas à obesidade e transtornos alimentares. 3) Descrever os conteúdos psicodinâmicos da narrativa do sujeito e avaliar o sistema tensional inconsciente de dois pacientes por meio do Teste das Relações Objetais de Phillipson (TRO). Método: O delineamento metodológico com análise de dados pelo método epidemiológico e estudo de caso clínico, orientação psicanalítica. Na primeira etapa foram consultados 300 questionários do serviço de psicologia e na segunda dois pacientes com ganho de peso após 24 meses. São pacientes que procuraram tratamento em clínica especializada, em uma metrópole do sudeste brasileiro, sob consentimento pós-informado. Os questionários foram preenchidos por 227 mulheres e 73 homens; com média de idade igual a 36 anos; escolaridade ensino médio e superior, 53%; maioria casados; IMC entre grave e super mórbido (94,3%). Técnicas cirúrgicas indicadas Capella Bypass e Fobi-Capella (67%). Resultados: características psicológicas referidas pelos pacientes, a ansiedade apontou em 93,7% das respostas, seguidas por impulsividade, depressão, tolerância à frustração, baixa auto-estima, resolvedor de problemas dos outros (mais de 50%). No histórico familiar da obesidade está em mais de 70% depressão e uso do álcool em 30%; realização de psicoterapia (30%) e medicamentos para depressão e ansiedade (10%). Na segunda etapa, foi realizado o diagnóstico psicodinâmico, por meio do Teste das Relações Objetais de Phillipson com duas pacientes, cuja análise indicou necessidade de psicoterapia psicanalítica, pois tinham fixações na posição esquizoparanóide e apresentavam dificuldade em lidar com perdas e baixa motivação para mudança e insigth. Conclusões: Com a aplicação do questionário e o registro das observações empíricas, este questionário de entrevista semidirigida preenche condições de melhor acessar e avaliar os conteúdos revelados pelos pacientes. As contradições entre as respostas e o discurso, no contato individual com o psicólogo, apontam a necessidade de investimento no preparo do paciente para a cirurgia e mais acentuadamente o acompanhamento psicológico no primeiro ano do pós-operatório. Há um pensamento mágico a ser trabalhado durante a aplicação do questionário sobre as crenças frente à cirurgia e o emagrecimento e assim convocar o paciente a ocupar o lugar do sujeito implicado em seu processo pré e pós-operatório. O TRO contribuiu na compreensão do diagnóstico psicodinâmico de pacientes com ganho de peso após cirurgia e reforçou a necessidade de maior investimento no pré-operatório.(AU)
Resumo:
The diatomite is a natural material that has numerous applications due to changes in their physical and chemical properties after processing. It is currently used in the industry as a sound insulator , filter aid and industrial load . The filter material shall be inert chemical composition , which will diatomite confers a high commercial value and performance not found in other particulate materials , for this application. The diatomite surface undergoes changes after thermal treatment at high temperatures , from 800ºC , with properties that enable its application in the food , beverage , pharmaceutical , cosmetic and textiles . In this work , we developed a study on thermal treatment on natural diatomite to adapt their properties to the application as a filter aid . The heat treatments were performed in an open oven at temperatures of 800ºC , 1000ºC and 1200ºC for a time of 24 hours. Reagents were added in the constitution of the samples analyzed. The reagents used were sodium carbonate (Na2CO3 ) and sodium chloride (NaCl) . The samples were characterized by x - ray diffraction , x -ray fluorescence , scanning electron microscopy , analysis and particle size distribution , specific surface area by the BET method , and pore volume by BJH method. The results showed a reduction in porosity of the material as well as a significant increase in specific surface area after heat treatment and the reactants in the ratio of 3 wt%. The diatomaceous earth , after heat treatment , undergone changes in its coloration , varying in white, cream and beige , which directly interferes with the speed of filtration materials process. All results obtained before and after heat treatment of the material with the values obtained for samples already used industrially , Brazilian and American industry , which were characterized using the same test methods performed with the samples in the study were compared and showed promising efficiency when material studied in the region of Punaú - RN , after processing , reagent addition and heat treatment, as an element in the composition of filter .
Resumo:
This dissertation describes the construction of a alternative didactic incorporating a historical approach with the use of the Roman abacus for teaching multiplication to students of 2nd year of elementary school, through activities ranging from the representation of numbers to multiplying with the Roman abacus, for learning the multiplication algorithm. Qualitative research was used as a methodological approach since the research object fits the goals of this research mode. Concerning the procedures, the research can be seen as a teaching experiment developed within the school environment. The instruments used for data collection were: observation, logbook, questionnaires, interviews and document analysis. The processing and analysis of data collected through the activities were classified and quantified in tables for easy viewing, interpretation, understanding, analysis of data and then transposed to charts. The analysis confirmed the research objectives and contributed to indicate the pedagogical use of the Roman abacus for teaching multiplication algorithm through several activities. Thus, it can be considered that this educational product will have important contributions for the teaching of this mathematical content, in Basic Education, particularly regarding to the multiplication process
Resumo:
In this work, we present our understanding about the article of Aksoy [1], which uses Markov chains to model the flow of intermittent rivers. Then, we executed an application of his model in order to generate data for intermittent streamflows, based on a data set of Brazilian streams. After that, we build a hidden Markov model as a proposed new approach to the problem of simulation of such flows. We used the Gamma distribution to simulate the increases and decreases in river flows, along with a two-state Markov chain. The motivation for us to use a hidden Markov model comes from the possibility of obtaining the same information that the Aksoy’s model provides, but using a single tool capable of treating the problem as a whole, and not through multiple independent processes
Resumo:
The water being vital natural resource and factor of economic and social development requires effective management and protection by the State. This thesis examines the panorama of National Water Resources Policy and the establishment of an effectively integrated management, shared and participative, contextualizing the principles foreseen in the policy. The work is focused on the discussion of public policies of access to water, analyzing the Fresh Water Program in semi-arid region of Brazil as a strategy of coexistence and permanence of a public policy that ensures the priority use, which is for human consumption. The conceptual framework of this study relies primarily on the contributions of authors in the field recognized as governance and water management. A study on the process of implementation of the various "institutions and policies" related to water management was promoted, contextualizing the change of paradigm in the transition from the centralized model to the one that takes into account the social participation, opening in this way broader perspectives for the analysis of the contents and of the impacts of these policies. The development of this study was conducted by the follow-up – both face-to-face as documentary-field – of the activities carried out while consultant of the Fresh Water Program. The history of water management in the semi-arid region was studied, depicting conflict movements and cooperation among actors. Despite the great obstacles to accomplish the shared and decentralized management, the study of this thesis points to a gradual improvement in the formulation of public policies that take into consideration governance and participatory management of water resources, with positive prospects towards the implementation of coordinated and cooperative actions in the region that mainly suffers from the shortage of rainfall, hence of shortage of water for irrigation and human consumption
Resumo:
Data Visualization is widely used to facilitate the comprehension of information and find relationships between data. One of the most widely used techniques for multivariate data (4 or more variables) visualization is the 2D scatterplot. This technique associates each data item to a visual mark in the following way: two variables are mapped to Cartesian coordinates so that a visual mark can be placed on the Cartesian plane; the others variables are mapped gradually to visual properties of the mark, such as size, color, shape, among others. As the number of variables to be visualized increases, the amount of visual properties associated to the mark increases as well. As a result, the complexity of the final visualization is higher. However, increasing the complexity of the visualization does not necessarily implies a better visualization and, sometimes, it provides an inverse situation, producing a visually polluted and confusing visualization—this problem is called visual properties overload. This work aims to investigate whether it is possible to work around the overload of the visual channel and improve insight about multivariate data visualized through a modification in the 2D scatterplot technique. In this modification, we map the variables from data items to multisensoriy marks. These marks are composed not only by visual properties, but haptic properties, such as vibration, viscosity and elastic resistance, as well. We believed that this approach could ease the insight process, through the transposition of properties from the visual channel to the haptic channel. The hypothesis was verified through experiments, in which we have analyzed (a) the accuracy of the answers; (b) response time; and (c) the grade of personal satisfaction with the proposed approach. However, the hypothesis was not validated. The results suggest that there is an equivalence between the investigated visual and haptic properties in all analyzed aspects, though in strictly numeric terms the multisensory visualization achieved better results in response time and personal satisfaction.
Resumo:
Shaping the Luso-Brazilian space in Portuguese America was through constant conflicts between different individuals and institutions. Regarding to land ownership, such conflicts were aggravated, depending on the individuals involved and their context. The captaincy of Rio Grande, there is conflict over land ownership Cidade dos Veados and Olho d' Água Azul and its stakeholders: priests of the Society of missionaries of the village Guajiru; indian mission Guajiru; and members of Carneiro da Cunha family. In 1725, the jesuit mission Guajiru requested a league of land at a place called Cidade dos Veados for the indians of his mission claiming that the land that the mission had was not sufficient for the subsistence of the same. In 1727, priest requested another league of land in place Olho d'Água Azul, stating that the mission had more than 192 couples. Both lands were properly required for the mission guajiru. however, in 1760, with the changes imposed by the indian directorate ombudsman responsible for investigating indigenous possessions realized that the indians did not occupy the two lands requested in the 1720s , due to the fact João Carneiro da Cunha has taken possession of the same. As a result, the impasse over land are ligth. This conflict over land ownership Cidade dos Veados and Olho d'Água Azul, we intend to highlight in particular the motivations and mindsets about possessory property of each party involved. We seek to understand the motivations of each group involved allowed the use of specific strategies and set out to try to take possession of the lands of the Cidade dos Veados e Olho d'Água Azul
Resumo:
The present study aims to evaluate the potential use of bagasse ash from sugar cane (CBC) as a flux, replacing phyllite and/or feldspar in standard industrial mass production of enameled porcelain, verifying the possibility of the CBC contribute to the overall reduction of the coefficient of thermal expansion of the ceramic mass. To this end, as a result of the research, we characterized the raw material components of the standard mass (clay, phyllite, kaolin, feldspar, quartz and talc) and the residue of BCC, by testing by XRF, XRD, AG, DTA and ATG. Specimens (CDP) were manufactured in the dimensions of 100 mm x 50 mm x 8 mm in uniaxial matrix under compaction pressure of 33 MPa, assembled in batches of 3 units subsequently sintered at temperatures of 1150°C to 1210°C by varying the Rating Scale at 10°C, heating and cooling ramp of 50°C/min and 25°C/min, with levels of 1 min, 3 min, 5 min, 8 min, 10 min, 15 min, 30 min and 60 min. analyzing the results of the physical properties of water absorption (WA), linear firing shrinkage (LFS), dilatometric analysis (DTA), flexural strain (SFT) and SEM of the sintered bodies in order to verify the adequacy of CDP to ISO 13006, ISO 10545, NBR 13816 standards; NBR 13817 and NBR 13818. The study showed that the formulations that best suit the requirements of the standards are:. G4 - which was applied in 10% of replacing the CBC phyllite, sintering temperature 1210 ° C for 10 min and porch, and F3 - with application of 7.5% of CBC to replace the feldspar in the sintering temperatures of 1190°C, 1200°C and 1210°C for 10 min and porch. These formulations showed better performance regarding the formation of primary and secondary mullite, with considerable reduction of cracks and pores, meeting the prerequisites of standards for glazed porcelain. The results shows that the use of the CBC as a flux in the preparation of porcelain mass meets standard parameters for the manufacture of the product, and thereby can reduce environmental impact and the cost of production. Therefore, it is recommended to use this residue in the ceramics industry, due to its industrial, commercial and collaborative viability for sustainability.
Resumo:
The reservoirs are water sources built along the fluvial basins, between rivers and dams made by concrete or earth. In Brazil they are built for different purposes, standing out the generation of energy (hydroelectric power station), flowing regulation, water reserves and flooding control, therefore they have played and still play an important role in the modern society.In the Northeastern semiarid region, they are typically used to supply cities and as a source of food.In the state of Rio Grande do Norte, the large reservoirs are intended for the same purpose.The cities settled in the riverbanks, or which have river channels crossing them, face flooding related problems. In the city of Macaíba-RN, flooding occurred systematically during the rainy season, causing great inconvenience to the local population.As product of the collective claim Tabatinga Reservoir in Jundiaí river was built, upstream of the city. Facing this background, this thesis aimed to assess the sócio-environmental quality of this reservoir.To achieve this goal, methodologies pointed to assess water quality along with the aplication of a questionnaire were used aimed to verify the quality of water and to know the perception of the residents from urban and rural área settled near to the reservoir was performed. The results showed the existence of conflicts of residents of rural communities and the presence of the reservoir, while for the city's population, the reservoir is considered not only the right solution to solve flooding in urban areas, but also as economic source for the rural population. Considering the water source assessment, this study concluded that the Tabatinga Reservoir is unfit for human use, due to the presence of metals of toxicological significance with the potential to elicit damage to the genetic material of individuals that use water from this reservoir, leading to cause serious risks to health population.
Resumo:
High dependability, availability and fault-tolerance are open problems in Service-Oriented Architecture (SOA). The possibility of generating software applications by integrating services from heterogeneous domains, in a reliable way, makes worthwhile to face the challenges inherent to this paradigm. In order to ensure quality in service compositions, some research efforts propose the adoption of verification techniques to identify and correct errors. In this context, exception handling is a powerful mechanism to increase SOA quality. Several research works are concerned with mechanisms for exception propagation on web services, implemented in many languages and frameworks. However, to the extent of our knowledge, no works found evaluates these mechanisms in SOA with regard to the .NET framework. The main contribution of this paper is to evaluate and to propose exception propagation mechanisms in SOA to applications developed within the .NET framework. In this direction, this work: (i)extends a previous study, showing the need to propose a solution to the exception propagation in SOA to applications developed in .NET, and (ii) show a solution, based in model obtained from the results found in (i) and that will be applied in real cases through of faults injections and AOP techniques.
Resumo:
In the last decades, analogue modelling has been used in geology to improve the knowledge of how geological structures are nucleated, how they grow and what are the main important points in such processes. The use of this tool in the oil industry, to help seismic interpretations and mainly to search for structural traps contributed to disseminate the use of this tool in the literature. Nowadays, physical modelling has a large field of applications, since landslide to granite emplacement along shear zones. In this work, we deal with physical modelling to study the influence of mechanical stratifications in the nucleation and development of faults and fractures in a context of orthogonal and conjugated oblique basins. To simulate a mechanical stratigraphy we used different materials, with distinct physical proprieties, such as gypsum powder, glass beads, dry clay and quartz sand. Some experiments were run along with a PIV (Particle Image Velocimetry), an instrument that shows the movement of the particles to each deformation moment. Two series of experiments were studied: i) Series MO: We tested the development of normal faults in a context of an orthogonal (to the extension direction) basin. Experiments were run taking into account the change of materials and strata thickness. Some experiments were done with sintectonic sedimentation. We registered differences in the nucleation and growth of faults in layers with different rheological behavior. The gypsum powder layer behaves in a more competent mode, which generates a great number of high angle fractures. These fractures evolve to faults that exhibit a higher dip than when they cross less competent layers, like the one of quartz sand. This competent layer exhibits faulted blocks arranged in a typical domino-style. Cataclastic breccias developed along the faults affecting the competent layers and showed different evolutional history, depending on the deforming stratigraphic sequence; ii) Series MOS2: Normal faults were analyzed in conjugated sub-basins (oblique to the extension direction) developed in a sequence with and without rheological contrast. In experiments with rheological contrast, two important grabens developed along the faulted margins differing from the subbasins with mechanical stratigraphy. Both experiments developed oblique fault systems and, in the area of sub-basins intersection, faults traces became very curved.
Resumo:
The electrical ceramic insulators industry, uses noble raw materials such as siliceous and aluminous clays of white burning, in order to provide plasticity of the mass and contribute to electrical and mechanical properties required of the product, and feldspar with the flux function In literature references the composition of the masses indicates that the clay participates in percentage between 20 and 32, and feldspar 8 to 35, these materials have significant cost. In this research was performed the total replacement of commercial clay, for white burning clay from Santa Luzia region in southern Bahia and partial replacement of feldspar by ash residue of husk conilon coffee burning, from extreme south of Bahia. The objective of replacement these raw materials is to aver its technical feasibility and call attention for the embryo pole of ceramic industry for the existing in the south and extreme south of Bahia, which has significant reserves of noble raw materials such as clay white burning, kaolin, quartz and feldspar, and generates significant volume of gray husk conilon coffee as alternate flux. Clay Santa Luzia is prima noble material whose current commercial application is the production of white roofing. The residue of coffee husk ash is discarded near of production sites and is harmful to the environment. Phase diagrams and statistic design of experiments, were used for optimization and cost savings in research. The results confirmed the expectations of obtaining electrical ceramic insulators, with white burning clay of Santa Luzia and partial replacement up to 35.4% of feldspar, by treaty residue of conilon ash coffee husk burning. The statistic design that showed best results was for formulation with percentages of: clay 26.4 to 30.4%; kaolin 14.85 to 17.1%; feldspar 12.92 to 16.96%; R2 residue 7.08 to 9.2% and Quartz 32.5 to 38.75%, relative to the total mass of the mixture. The best results indicated; 0.2 to 1.4% apparent porosity , water absorption 0.1 to 0.7%, flexural strength 35 to 45MPa , dielectric strength 35-41 kV/cm , the transverse resistivity 8x109 2.5x1010 Ω.cm and for the dielectric constant ε/ε0 7 to 10.4, specification parameters for manufacturing ceramic electrical insulators of low and medium voltage.
Resumo:
Cloud computing can be defined as a distributed computational model by through resources (hardware, storage, development platforms and communication) are shared, as paid services accessible with minimal management effort and interaction. A great benefit of this model is to enable the use of various providers (e.g a multi-cloud architecture) to compose a set of services in order to obtain an optimal configuration for performance and cost. However, the multi-cloud use is precluded by the problem of cloud lock-in. The cloud lock-in is the dependency between an application and a cloud platform. It is commonly addressed by three strategies: (i) use of intermediate layer that stands to consumers of cloud services and the provider, (ii) use of standardized interfaces to access the cloud, or (iii) use of models with open specifications. This paper outlines an approach to evaluate these strategies. This approach was performed and it was found that despite the advances made by these strategies, none of them actually solves the problem of lock-in cloud. In this sense, this work proposes the use of Semantic Web to avoid cloud lock-in, where RDF models are used to specify the features of a cloud, which are managed by SPARQL queries. In this direction, this work: (i) presents an evaluation model that quantifies the problem of cloud lock-in, (ii) evaluates the cloud lock-in from three multi-cloud solutions and three cloud platforms, (iii) proposes using RDF and SPARQL on management of cloud resources, (iv) presents the cloud Query Manager (CQM), an SPARQL server that implements the proposal, and (v) comparing three multi-cloud solutions in relation to CQM on the response time and the effectiveness in the resolution of cloud lock-in.
Resumo:
In this paper we propose a class for introducing the probability teaching using the game discs which is based on the concept of geometric probability and which is supposed to determine the probability of a disc randomly thrown does not intercept the lines of a gridded surface. The problem was posed to a group of 3nd year of the Federal Institute of Education, Science and Technology of Rio Grande do Norte - Jo~ao C^amara. Therefore, the students were supposed to build a grid board in which the success percentage of the players had been previously de ned for them. Once the grid board was built, the students should check whether that theoretically predetermined percentage corresponded to reality obtained through experimentation. The results and attitude of the students in further classes suggested greater involvement of them with discipline, making the environment conducive for learning.