The local configuration of a science and innovation policy : a city into the nanoworld

Local trajectories and arrangements play a significant role because the development of a research field, such as nanoscience and nanotechnology, requires substantial investments in human and instrumental resources. But why are there often concentrated in a limited number of places? What dynamics lead to such concentration? The hypothesis is that there is an assemblage of heterogeneous resources through the action of local actors. The chapter will explore, from an Actor Network Theory (ANT) perspective, how the local emergence of research dynamics from: the revival of local traditions, the local and national action of institutional entrepreneurs, controversial dynamics, and researchers' arrangements to involve other actors. It will examine how they connect up with each other and mutually commit themselves to the development of new technologies. It will focus on the role of narratives in this assembling: how were the local narratives of the past mobilized and to what effect.

Peatlands and plantations in Sumatra, Indonesia : Complex realities for resource governance, rural development and climate change mitigation

Peatlands play a crucial role in Indonesia's economic development, and in its stated goal of reducing greenhouse gas emissions. Improved peatland management - including a national moratorium on the granting of any new conversion licenses - forms a cornerstone of Indonesia's climate change mitigation commitment. At the same time, rapid expansion of the plantation sector is driving wide-scale drainage and conversion of peat swamp ecosystems. The province of Riau, in central Sumatra, finds itself at the crossroads of these conflicting agendas. This essay presents a case study of three islands on Riau's east coast affected by industrial timber plantation concessions. It examines the divergent experiences, perceptions and responses of communities on the islands. A mix of dramatic protests, localised everyday actions and constructive dialogue has succeeded in delaying or perhaps halting one of the concessions, while negotiations and contestation with the other two continue. With the support of regional and national non-governmental organisations and local government, communities are pursuing alternative development strategies, including the cultivation of sago, which requires no peat drainage. While a powerful political economy of state and corporate actors shapes the contours of socio-environmental change, local social movements can alter trajectories of change, promoting incremental improvements and alternative pathways.

Development of a population-based cost-effectiveness model of chronic graft versus host disease in Spain

Chronic graft-versus-host disease (cGvHD) is the leading cause of late nonrelapse mortality (transplant-related mortality) after hematopoietic stem cell transplant. Given that there are a wide range of treatment options for cGvHD, assessment of the associated costs and efficacy can help clinicians and health care providers allocate health care resources more efficiently. OBJECTIVE: The purpose of this study was to assess the cost-effectiveness of extracorporeal photopheresis (ECP) compared with rituximab (Rmb) and with imatinib (Imt) in patients with cGvHD at 5 years from the perspective of the Spanish National Health System. METHODS: The model assessed the incremental cost-effectiveness/utility ratio of ECP versus Rmb or Imt for 1000 hypothetical patients by using microsimulation cost-effectiveness techniques. Model probabilities were obtained from the literature. Treatment pathways and adverse events were evaluated taking clinical opinion and published reports into consideration. Local data on costs (2010 Euros) and health care resources utilization were validated by the clinical authors. Probabilistic sensitivity analyses were used to assess the robustness of the model. RESULTS: The greater efficacy of ECP resulted in a gain of 0.011 to 0.024 quality-adjusted life-year in the first year and 0.062 to 0.094 at year 5 compared with Rmb or Imt. The results showed that the higher acquisition cost of ECP versus Imt was compensated for at 9 months by greater efficacy; this higher cost was partially compensated for ( 517) by year 5 versus Rmb. After 9 months, ECP was dominant (cheaper and more effective) compared with Imt. The incremental cost-effectiveness ratio of ECP versus Rmb was 29,646 per life-year gained and 24,442 per quality-adjusted life-year gained at year 2.5. Probabilistic sensitivity analysis confirmed the results. The main study limitation was that to assess relative treatment effects, only small studies were available for indirect comparison. CONCLUSION: ECP as a third-line therapy for cGvHD is a more cost-effective strategy than Rmb or Imt.

Characterization of local and systemic immune-modulation in melanoma patients

Le mélanome cutané est un des cancers les plus agressifs et dont l'incidence augmente le plus en Suisse. Une fois métastatique, le pronostic de survie moyenne avec les thérapies actuelles est d'environ huit mois, avec moins de 5% de survie à cinq ans. Les récents progrès effectués dans la compréhension de la biologie de la cellule tumorale mais surtout dans l'importance du système immunitaire dans le contrôle de ce cancer ont permis le développement de nouveaux traitements novateurs et prometteurs. Ces thérapies, appelées immunothérapies, reposent sur la stimulation et l'augmentation de la réponse immunitaire à la tumeur. Alors que les derniers essais cliniques ont démontré l'efficacité de ces traitements chez les patients avec des stades avancés de la maladie, le contrôle de la maladie à long- terme est seulement atteint chez une minorité des patients. La suppression locale et systémique de la réponse immunitaire spécifique anti-tumorale apparaitrait comme une des raisons expliquant la persistance d'un mauvais pronostic clinique chez ces patients. Des études sur les souris ont montré que les vaisseaux lymphatiques joueraient un rôle primordial dans ce processus en induisant une tolérance immune, ce qui permettrait à la tumeur d'échapper au contrôle du système immunitaire et métastatiser plus facilement. Ces excitantes découvertes n'ont pas encore été établi et prouvé chez l'homme. Dans cette thèse, nous montrons pour la première fois que les vaisseaux lymphatiques sont directement impliqués dans la modulation de la réponse immunitaire au niveau local et systémique dans le mélanome chez l'homme. Ces récentes découvertes montrent le potentiel de combiner des thérapies visant le système lymphatique avec les immunothérapies actuellement utilisées afin d'améliorer le pronostic des patients atteint du mélanome. -- Cutaneous melanoma is one of the most invasive and metastatic human cancers and causes 75% of skin cancer mortality. Current therapies such as surgery and chemotherapy fail to control metastatic disease, and relapse occurs frequently due to microscopic residual lesions. It is, thus, essential to develop and optimize novel therapeutic strategies to improve curative responses in these patients. In recent decades, tumor immunologists have revealed the development of spontaneous adaptive immune responses in melanoma patients, leading to the accumulation of highly differentiated tumor-specific T cells at the tumor site. This remains one of the most powerful prognostic markers to date. Immunotherapies that augment the natural function of these tumor-specific T cells have since emerged as highly attractive therapeutic approaches to eliminate melanoma cells. While recent clinical trials have demonstrated great progress in the treatment of advanced stage melanoma, long-term disease control is still only achieved in a minority of patients. Local and systemic immune suppression by the tumor appears to be responsible, in part, for this poor clinical evolution. These facts underscore the need for a better analysis and characterization of immune- related pathways within the tumor microenvironment (TME), as well as at the systemic level. The overall goal of this thesis is, thus, to obtain greater insight into the complexity and heterogeneity of the TME in human melanoma, as well as to investigate immune modulation beyond the TME, which ultimately influences the immune system throughout the whole body. To achieve this, we established two main objectives: to precisely characterize local and systemic immune modulation (i) in untreated melanoma patients and (ii) in patients undergoing peptide vaccination or checkpoint blockade therapy with anti-cytotoxic T- lymphocyte-asisctaed protein-4 (CTLA-4) antibody. In the first and main part of this thesis, we analyzed lymphatic vessels in relation to anti-tumor immune responses in tissues from vaccinated patients using a combination of immunohistochemistry (IHC) techniques, whole slide scanning/analysis, and an automatic quantification system. Strikingly, we found that increased lymphatic vessel density was associated with high expression of immune suppressive molecules, low functionality of tumor-infiltrating CD8+ T cells and decreased cytokine production by tumor-antigen specific CD8+ T cells in the blood. These data revealed a previously unappreciated local and systemic role of lymphangiogenesis in modulating T cell responses in human cancer and support the use of therapies that target lymphatic vessels combined with existing and future T cell based therapies. In the second objective, we describe a metastatic melanoma patient who developed pulmonary sarcoid-like granulomatosis following repetitive vaccination with peptides and CpG. We demonstrated that the onset of this pulmonary autoimmune adverse event was related to the development of a strong and long-lasting tumor-specific CD8+ T cell response. This constitutes the first demonstration that a new generation tumor vaccine can induce the development of autoimmune adverse events. In the third objective, we assessed the use of Fourier Transform Infrared (FTIR) imaging to identify melanoma cells and lymphocyte subpopulations in lymph node (LN) metastasis tissues, thanks to a fruitful collaboration with researchers in Brussels. We demonstrated that the different cell types in metastatic LNs have different infrared spectral features allowing automated identification of these cells. This technic is therefore capable of distinguishing known and novel biological features in human tissues and has, therefore, significant potential as a tool for histopathological diagnosis and biomarker assessment. Finally, in the fourth objective, we investigated the role of colony- stimulating factor-1 (CSF-1) in modulating the anti-tumor response in ipilimumab-treated patients using IHC and in vitro co-cultures, revealing that melanoma cells produce CSF-1 via CTL-derived cytokines when attacked by cytotoxic T lymphocytes (CTLs), resulting in the recruitment of immunosuppressive monocytes. These findings support the combined use of CSF-1R blockade with T cell based immunotherapy for melanoma patients. Taken together, our results reveal the existence of novel mechanisms of immune modulation and thus promote the optimization of combination immunotherapies against melanoma. -- Le mélanome cutané est un des cancers humains les plus invasifs et métastatiques et est responsable de 75% de la mortalité liée aux cancers de la peau. Les thérapies comme la chirurgie et la chimiothérapie ont échoué à contrôler le mélanome métastatique, par ailleurs les rechutes sous ces traitements ont été montrées fréquentes. Il est donc essentiel de développer et d'optimiser de nouvelles stratégies thérapeutiques pour améliorer les réponses thérapeutiques de ces patients. Durant les dernières décennies, les immunologistes spécialisés dans les tumeurs ont démontré qu'un patient atteint du mélanome pouvait développer spontanément une réponse immune adaptative à sa tumeur et que l'accumulation de cellules T spécifiques tumorales au sein même de la tumeur était un des plus puissants facteurs pronostiques. Les immunothérapies qui ont pour but d'augmenter les fonctions naturelles de ces cellules T spécifiques tumorales ont donc émergé comme des approches thérapeutiques très attractives pour éliminer les cellules du mélanome. Alors que les derniers essais cliniques ont démontré un progrès important dans le traitement des formes avancées du mélanome, le contrôle de la maladie à long-terme est seulement atteint chez une minorité des patients. La suppression immune locale et systémique apparaitrait comme une des raisons expliquant la persistance d'un mauvais pronostic clinique chez ces patients. Ces considérations soulignent la nécessité de mieux analyser et caractériser les voies immunitaires non seulement au niveau local dans le microenvironement tumoral mais aussi au niveau systémique dans le sang des patients. Le but de cette thèse est d'obtenir une plus grande connaissance de la complexité et de l'hétérogénéité du microenvironement tumoral dans les mélanomes mais aussi d'investiguer la modulation immunitaire au delà du microenvironement tumoral au niveau systémique. Afin d'atteindre ce but, nous avons établi deux objectifs principaux : caractériser précisément la modulation locale et systémique du système immunitaire (i) chez les patients atteints du mélanome qui n'ont pas reçu de traitement et (ii) chez les patients qui ont été traités soit par des vaccins soit par des thérapies qui bloquent les points de contrôles. Dans la première et majeure partie de cette thèse, nous avons analysé les vaisseaux lymphatiques en relation avec la réponse immunitaire anti-tumorale dans les tissus des patients vaccinés grâce à des techniques d'immunohistochimie et de quantification informatisé et automatique des marquages. Nous avons trouvé qu'une densité élevée de vaisseaux lymphatiques dans la tumeur était associée à une plus grande expression de molécules immunosuppressives ainsi qu'à une diminution de la fonctionnalité des cellules T spécifiques tumoral dans la tumeur et dans le sang des patients. Ces résultats révèlent un rôle jusqu'à là inconnu des vaisseaux lymphatiques dans la modulation directe du système immunitaire au niveau local et systémique dans les cancers de l'homme. Cette recherche apporte finalement des preuves du potentiel de combiner des thérapies visant le système lymphatique avec des autres immunothérapies déjà utilisées en clinique. Dans le second objectif, nous rapportons le cas d'un patient atteint d'un mélanome avec de multiples métastases qui a développé à la suite de plusieurs vaccinations répétées et consécutives avec des peptides et du CpG, un évènement indésirable sous la forme d'une granulomatose pulmonaire sarcoid-like. Nous avons démontré que l'apparition de cet évènement était intimement liée au développement d'une réponse immunitaire durable et spécifique contre les antigènes de la tumeur. Par là- même, nous prouvons pour la première fois que la nouvelle génération de vaccins est aussi capable d'induire des effets indésirables auto-immuns. Pour le troisième objectif, nous avons voulu savoir si l'utilisation de la spectroscopie infrarouge à transformée de Fourier (IRTF) était capable d'identifier les cellules du mélanome ainsi que les différents sous-types cellulaires dans les ganglions métastatiques. Grâce à nos collaborateurs de Bruxelles, nous avons pu établir que les diverses composantes cellulaires des ganglions atteints par des métastases du mélanome présentaient des spectres infrarouges différents et qu'elles pouvaient être identifiées d'une façon automatique. Cette nouvelle technique permettrait donc de distinguer des caractéristiques biologiques connues ou nouvelles dans les tissus humains qui auraient des retombées pratiques importantes dans le diagnostic histopathologique et dans l'évaluation des biomarqueurs. Finalement dans le dernier objectif, nous avons investigué le rôle du facteur de stimulation des colonies (CSF-1) dans la modulation de la réponse immunitaire anti-tumorale chez les patients qui ont été traités par l'Ipilimumab. Nos expériences in vivo au niveau des tissus tumoraux et nos co-cultures in vitro nous ont permis de démontrer que les cytokines secrétées par les cellules T spécifiques anti-tumorales induisaient la sécrétion de CSF-1 dans les cellules du mélanome ce qui résultait en un recrutement de monocytes immunosuppresseurs. Dans son ensemble, cette thèse révèle donc l'existence de nouveaux mécanismes de modulation de la réponse immunitaire anti-tumorale et propose de nouvelles optimisations de combinaison d'immunothérapies contre le mélanome.

The role of advanced nursing in lung cancer: A framework based development.

PURPOSE: Advanced Practice Lung Cancer Nurses (APLCN) are well-established in several countries but their role has yet to be established in Switzerland. Developing an innovative nursing role requires a structured approach to guide successful implementation and to meet the overarching goal of improved nursing sensitive patient outcomes. The "Participatory, Evidence-based, Patient-focused process, for guiding the development, implementation, and evaluation of advanced practice nursing" (PEPPA framework) is one approach that was developed in the context of the Canadian health system. The purpose of this article is to describe the development of an APLCN model at a Swiss Academic Medical Center as part of a specialized Thoracic Cancer Center and to evaluate the applicability of PEPPA framework in this process. METHOD: In order to develop and implement the APLCN role, we applied the first seven phases of the PEPPA framework. RESULTS: This article spreads the applicability of the PEPPA framework for an APLCN development. This framework allowed us to i) identify key components of an APLCN model responsive to lung cancer patients' health needs, ii) identify role facilitators and barriers, iii) implement the APLCN role and iv) design a feasibility study of this new role. CONCLUSIONS: The PEPPA framework provides a structured process for implementing novel Advanced Practice Nursing roles in a local context, particularly where such roles are in their infancy. Two key points in the process include assessing patients' health needs and involving key stakeholders.

Offshore Sourcing in Software Development: Case Studies of Finnish-Russian Cooperation

The study examines international cooperation in product development in software development organisations. The software industry is known for its global nature and knowledge-intensity, which makes it an interesting setting to examine international cooperation in. Software development processes are increasingly distributed worldwide, but for small or even medium-sized enterprises, typical for the software industry, such distribution of operations is often possible only in association with crossing the company’s boundaries. The strategic decision-making of companies is likely to be affected by the characteristics of the industry, and this includes decisions about cooperation or sourcing. The objective of this thesis is to provide a holistic view on factors affecting decisions about offshore sourcing in software development. Offshore sourcing refers to a cooperative mode of offshoring, where a firm does not establish its own presence in a foreign country, but utilises a local supplier. The study examines product development activities that are distributed across organisational and geographical boundaries. The objective can be divided into two subtopics: general reasons for international cooperation in product development and particular reasons for cooperation between Finnish and Russian companies. The focus is on the strategic rationale at the company level, in particular in small and medium-sized enterprises. The theoretical discourse of the study builds upon the literature on international cooperation and networking, with particular focus on cooperation with foreign suppliers and within product development activities. The resource-based view is also discussed, as heterogeneity and interdependency of the resources possessed by different firms are seen as factors motivating international cooperation. Strategically, sourcing can be used to access resources possessed by an industrial network, to enhance the product development of a firm, or to optimise its cost structure. In order to investigate the issues raised by the theoretical review, two empirical studies on international cooperation in software product development have been conducted. The emphasis of the empirical part of the study is on cooperation between Finnish and Russian companies. The data has been gathered through four case studies on Finnish software development organisations and four case studies on Russian offshore suppliers. Based on the material from the case studies, a framework clarifying and grouping the factors that influence offshore sourcing decisions has been built. The findings indicate that decisions regarding offshore sourcing in software development are far more complex than generally assumed. The framework provides a holistic view on factors affecting decisions about offshore sourcing in software development, capturing the multidimensionality of motives for entering offshore cooperation. Four groups of factors emerged from the data: A) strategy-related aspects, B) aspects related to resources and capabilities, C) organisation-related aspects, and D) aspects related to the entrepreneur or management. By developing a holistic framework of decision factors, the research offers in-depth theoreticalunderstanding of offshore sourcing rationale in product development. From the managerial point of view, the proposed framework sums up the issues that a firm should pay attention to when contemplating product development cooperation with foreign suppliers. Understanding different components of sourcing decisions can lead to improved preconditions for strategising and engaging in offshore cooperation. A thorough decisionmaking process should consider all the possible benefits and risks of product development cooperation carefully.

A Practical Micro Mechanical Model Based Local Approach Methodology for the Analysis of Ductile Fracture of Welded T-Joints

This thesis concentrates on developing a practical local approach methodology based on micro mechanical models for the analysis of ductile fracture of welded joints. Two major problems involved in the local approach, namely the dilational constitutive relation reflecting the softening behaviour of material, and the failure criterion associated with the constitutive equation, have been studied in detail. Firstly, considerable efforts were made on the numerical integration and computer implementation for the non trivial dilational Gurson Tvergaard model. Considering the weaknesses of the widely used Euler forward integration algorithms, a family of generalized mid point algorithms is proposed for the Gurson Tvergaard model. Correspondingly, based on the decomposition of stresses into hydrostatic and deviatoric parts, an explicit seven parameter expression for the consistent tangent moduli of the algorithms is presented. This explicit formula avoids any matrix inversion during numerical iteration and thus greatly facilitates the computer implementation of the algorithms and increase the efficiency of the code. The accuracy of the proposed algorithms and other conventional algorithms has been assessed in a systematic manner in order to highlight the best algorithm for this study. The accurate and efficient performance of present finite element implementation of the proposed algorithms has been demonstrated by various numerical examples. It has been found that the true mid point algorithm (a = 0.5) is the most accurate one when the deviatoric strain increment is radial to the yield surface and it is very important to use the consistent tangent moduli in the Newton iteration procedure. Secondly, an assessment of the consistency of current local failure criteria for ductile fracture, the critical void growth criterion, the constant critical void volume fraction criterion and Thomason's plastic limit load failure criterion, has been made. Significant differences in the predictions of ductility by the three criteria were found. By assuming the void grows spherically and using the void volume fraction from the Gurson Tvergaard model to calculate the current void matrix geometry, Thomason's failure criterion has been modified and a new failure criterion for the Gurson Tvergaard model is presented. Comparison with Koplik and Needleman's finite element results shows that the new failure criterion is fairly accurate indeed. A novel feature of the new failure criterion is that a mechanism for void coalescence is incorporated into the constitutive model. Hence the material failure is a natural result of the development of macroscopic plastic flow and the microscopic internal necking mechanism. By the new failure criterion, the critical void volume fraction is not a material constant and the initial void volume fraction and/or void nucleation parameters essentially control the material failure. This feature is very desirable and makes the numerical calibration of void nucleation parameters(s) possible and physically sound. Thirdly, a local approach methodology based on the above two major contributions has been built up in ABAQUS via the user material subroutine UMAT and applied to welded T joints. By using the void nucleation parameters calibrated from simple smooth and notched specimens, it was found that the fracture behaviour of the welded T joints can be well predicted using present methodology. This application has shown how the damage parameters of both base material and heat affected zone (HAZ) material can be obtained in a step by step manner and how useful and capable the local approach methodology is in the analysis of fracture behaviour and crack development as well as structural integrity assessment of practical problems where non homogeneous materials are involved. Finally, a procedure for the possible engineering application of the present methodology is suggested and discussed.

Development of corporate social responsibility in Finnish forest industry

The main objective of this thesis was to map the development of corporate social responsibility (CSR) in Finnish forest industry. The aim was to describe the development and find factors that explain the development. Another objective was to understand the influence of different stakeholders on the development as well as examine the development of CSR reporting. This qualitative case study used thematic interviews as the research method. The research data were collected by conducting 11 interviews among the case company representatives and stakeholders. Based on the research results, no single factor in the background of the phenomenon could be showed. Instead, CSR has developed in stages through its different dimensions. The main drivers of CSR turned out to be environmental organizations, customers and local communities. It can be concluded that the forest industry has taken CSR seriously for a long time, which has benefited the forest companies in many ways.

Programació d'una aplicació gràfica per l'anàlisi de senyals usant LDB (Local Discriminant Bases) i MLDB (Modified LDB)

Tot seguit presentem un entorn per analitzar senyals de tot tipus amb LDB (Local Discriminant Bases) i MLDB (Modified Local Discriminant Bases). Aquest entorn utilitza funcions desenvolupades en el marc d’una tesi en fase de desenvolupament. Per entendre part d’aquestes funcions es requereix un nivell de coneixement avançat de processament de senyals. S’han extret dels treballs realitzats per Naoki Saito [3], que s’han agafat com a punt de partida per la realització de l’algorisme de la tesi doctoral no finalitzada de Jose Antonio Soria. Aquesta interfície desenvolupada accepta la incorporació de nous paquets i funcions. Hem deixat un menú preparat per integrar Sinus IV packet transform i Cosine IV packet transform, tot i que també podem incorporar-n’hi altres. L’aplicació consta de dues interfícies, un Assistent i una interfície principal. També hem creat una finestra per importar i exportar les variables desitjades a diferents entorns. Per fer aquesta aplicació s’han programat tots els elements de les finestres, en lloc d’utilitzar el GUIDE (Graphical User Interface Development Enviroment) de MATLAB, per tal que sigui compatible entre les diferents versions d’aquest programa. En total hem fet 73 funcions en la interfície principal (d’aquestes, 10 pertanyen a la finestra d’importar i exportar) i 23 en la de l’Assistent. En aquest treball només explicarem 6 funcions i les 3 de creació d’aquestes interfícies per no fer-lo excessivament extens. Les funcions que explicarem són les més importants, ja sigui perquè s’utilitzen sovint, perquè, segons la complexitat McCabe, són les més complicades o perquè són necessàries pel processament del senyal. Passem cada entrada de dades per part de l’usuari per funcions que ens detectaran errors en aquesta entrada, com eliminació de zeros o de caràcters que no siguin números, com comprovar que són enters o que estan dins dels límits màxims i mínims que li pertoquen.

Determining the location for a mobile device by utilization of local resources of the environment

The subject being analyzed of this Master’s Thesis is a development of a service that is used to define a current location of a mobile device. The service utilized data that is obtained from own GPS receiver in some possible cases and as well data from mobile devices which can be afforded for the current environment for acquisition of more precise position of the device. The computation environment is based on context of a mobile device. The service is implemented as an application for communicator series Nokia N8XX. The Master’s Thesis presents theoretical concept of the method and its practical implementation, architecture of the application, requirements and describes a process of its functionality. Also users’ work with application is presented and recommendations for possible future improvements are made.

Developing markets of energy biomass – local and global perspectives

The thesis explores global and national-level issues related to the development of markets for biomass for energy. The thesis consists of five separate papers and provides insights on selected issues. The aim of Paper I was to identify methodological and statistical challenges in assessing international solid and liquid biofuels trade and provide an overview of the Finnish situation with respect to the status of international solid and liquid biofuels trade. We found that, for the Finnish case, it is possible to qualify direct and indirect trade volumes of biofuels. The study showed that indirect trade of biofuels has a highly significant role in Finland and may be a significant sector also in global biofuels trade. The purpose of Paper II was to provide a quantified insight into Finnish prospects for meeting the national 2020 renewable energy targets and concurrently becoming a largescale producer of forest-biomass-based second-generation biofuels for feeding increasing demand in European markets. We found that Finland has good opportunities to realise a scenario to meet 2020 renewable energy targets and for large-scale production of wood-based biofuels. The potential net export of transport biofuels from Finland in 2020 would correspond to 2–3% of European demand. Paper III summarises the global status of international solid and liquid biofuels trade as illuminated by several separate sources. International trade of biofuels was estimated at nearly 1 EJ for 2006. Indirect trade of biofuels through trading of industrial roundwood and material by-products comprises the largest proportion of the trading, with a share of about two thirds. The purpose of Paper IV was to outline a comprehensive picture of the coverage of various certification schemes and sustainability principles relating to the entire value-added chain of biomass and bioenergy. Regardless of the intensive work that has been done in the field of sustainability schemes and principles concerning use of biomass for energy, weaknesses still exist. The objective of Paper V was to clarify the alternative scenarios for the international biomass market until 2020 and identify the underlying steps needed toward a wellfunctioning and sustainable market for biomass for energy purposes. An overall conclusion drawn from this analysis concerns the enormous opportunities related to the utilisation of biomass for energy in the coming decades.

Development of a measuring-control system for energy monitoring in low power

In this thesis a control system for an intelligent low voltage energy grid is presented, focusing on the control system created by using a multi-agent approach which makes it versatile and easy to expand according to the future needs. The control system is capable of forecasting the future energy consumption and decisions making on its own without human interaction when countering problems. The control system is a part of the St. Petersburg State Polytechnic University’s smart grid project that aims to create a smart grid for the university’s own use. The concept of the smart grid is interesting also for the consumers as it brings new possibilities to control own energy consumption and to save money. Smart grids makes it possible to monitor the energy consumption in real-time and to change own habits to save money. The intelligent grid also brings possibilities to integrate the renewable energy sources to the global or the local energy production much better than the current systems. Consumers can also sell their extra power to the global grid if they want.

Towards combining interactive mobile TV and smart spaces : architectures, tools and application development

Technological developments in microprocessors and ICT landscape have made a shift to a new era where computing power is embedded in numerous small distributed objects and devices in our everyday lives. These small computing devices are ne-tuned to perform a particular task and are increasingly reaching our society at every level. For example, home appliances such as programmable washing machines, microwave ovens etc., employ several sensors to improve performance and convenience. Similarly, cars have on-board computers that use information from many di erent sensors to control things such as fuel injectors, spark plug etc., to perform their tasks e ciently. These individual devices make life easy by helping in taking decisions and removing the burden from their users. All these objects and devices obtain some piece of information about the physical environment. Each of these devices is an island with no proper connectivity and information sharing between each other. Sharing of information between these heterogeneous devices could enable a whole new universe of innovative and intelligent applications. The information sharing between the devices is a diffcult task due to the heterogeneity and interoperability of devices. Smart Space vision is to overcome these issues of heterogeneity and interoperability so that the devices can understand each other and utilize services of each other by information sharing. This enables innovative local mashup applications based on shared data between heterogeneous devices. Smart homes are one such example of Smart Spaces which facilitate to bring the health care system to the patient, by intelligent interconnection of resources and their collective behavior, as opposed to bringing the patient into the health system. In addition, the use of mobile handheld devices has risen at a tremendous rate during the last few years and they have become an essential part of everyday life. Mobile phones o er a wide range of different services to their users including text and multimedia messages, Internet, audio, video, email applications and most recently TV services. The interactive TV provides a variety of applications for the viewers. The combination of interactive TV and the Smart Spaces could give innovative applications that are personalized, context-aware, ubiquitous and intelligent by enabling heterogeneous systems to collaborate each other by sharing information between them. There are many challenges in designing the frameworks and application development tools for rapid and easy development of these applications. The research work presented in this thesis addresses these issues. The original publications presented in the second part of this thesis propose architectures and methodologies for interactive and context-aware applications, and tools for the development of these applications. We demonstrated the suitability of our ontology-driven application development tools and rule basedapproach for the development of dynamic, context-aware ubiquitous iTV applications.

Drivers and barriers of mobile travel and tourism service adoption : a study of individual perceptions and business model development in a travel and tourism context

The Travel and Tourism field is undergoing changes due to the rapid development of information technology and digital services. Online travel has profoundly changed the way travel and tourism organizations interact with their customers. Mobile technology such as mobile services for pocket devices (e.g. mobile phones) has the potential to take this development even further. Nevertheless, many issues have been highlighted since the early days of mobile services development (e.g. the lack of relevance, ease of use of many services). However, the wide adoption of smartphones and the mobile Internet in many countries as well as the formation of so-called ecosystems between vendors of mobile technology indicate that many of these issues have been overcome. Also when looking at the numbers of downloaded applications related to travel in application stores like Google Play, it seems obvious that mobile travel and tourism services are adopted and used by many individuals. However, as business is expected to start booming in the mobile era, many issues have a tendency to be overlooked. Travelers are generally on the go and thus services that work effectively in mobile settings (e.g. during a trip) are essential. Hence, the individuals’ perceived drivers and barriers to use mobile travel and tourism services in on-site or during trip settings seem particularly valuable to understand; thus this is one primary aim of the thesis. We are, however, also interested in understanding different types of mobile travel service users. Individuals may indeed be very different in their propensity to adopt and use technology based innovations (services). Research is also switching more from investigating issues of mobile service development to understanding individuals’ usage patterns of mobile services. But designing new mobile services may be a complex matter from a service provider perspective. Hence, our secondary aim is to provide insights into drivers and barriers of mobile travel and tourism service development from a holistic business model perspective. To accomplish the research objectives seven different studies have been conducted over a time period from 2002 – 2013. The studies are founded on and contribute to theories within diffusion of innovations, technology acceptance, value creation, user experience and business model development. Several different research methods are utilized: surveys, field and laboratory experiments and action research. The findings suggest that a successful mobile travel and tourism service is a service which supports one or several mobile motives (needs) of individuals such as spontaneous needs, time-critical arrangements, efficiency ambitions, mobility related needs (location features) and entertainment needs. The service could be customized to support travelers’ style of traveling (e.g. organized travel or independent travel) and should be easy to use, especially easy to take into use (access, install and learn) during a trip, without causing security concerns and/or financial risks for the user. In fact, the findings suggest that the most prominent barrier to the use of mobile travel and tourism services during a trip is an individual’s perceived financial cost (entry costs and usage costs). It should, however, be noted that regulations are put in place in the EU regarding data roaming prices between European countries and national telecom operators are starting to see ‘international data subscriptions’ as a sales advantage (e.g. Finnish Sonera provides a data subscription in the Baltic and Nordic region at the same price as in Finland), which will enhance the adoption of mobile travel and tourism services also in international contexts. In order to speed up the adoption rate travel service providers could consider e.g. more local initiatives of free Wi-Fi networks, development of services that can be used, at least to some extent, in an offline mode (do not require costly network access during a trip) and cooperation with telecom operators (e.g. lower usage costs for travelers who use specific mobile services or travel with specific vendors). Furthermore, based on a developed framework for user experience of mobile trip arrangements, the results show that a well-designed mobile site and/or native application, which preferably supports integration with other mobile services, is a must for true mobile presence. In fact, travel service providers who want to build a relationship with their customers need to consider a downloadable native application, but in order to be found through the mobile channel and make contact with potential new customers, a mobile website should be available. Moreover, we have made a first attempt with cluster analysis to identify user categories of mobile services in a travel and tourism context. The following four categories were identified: info-seekers, checkers, bookers and all-rounders. For example “all-rounders”, represented primarily by individuals who use their pocket device for almost any of the investigated mobile travel services, constituted primarily of 23 to 50 year old males with high travel frequency and great online experience. The results also indicate that travel service providers will increasingly become multi-channel providers. To manage multiple online channels, closely integrated and hybrid online platforms for different devices, supporting all steps in a traveler process should be considered. It could be useful for travel service providers to focus more on developing browser-based mobile services (HTML5-solutions) than native applications that work only with specific operating systems and for specific devices. Based on an action research study and utilizing a holistic business model framework called STOF we found that HTML5 as an emerging platform, at least for now, has some limitations regarding the development of the user experience and monetizing the application. In fact, a native application store (e.g. Google Play) may be a key mediator in the adoption of mobile travel and tourism services both from a traveler and a service provider perspective. Moreover, it must be remembered that many device and mobile operating system developers want service providers to specifically create services for their platforms and see native applications as a strategic advantage to sell more devices of a certain kind. The mobile telecom industry has moved into a battle of ecosystems where device makers, developers of operating systems and service developers are to some extent forced to choose their development platforms.

Application and development of numerical methods for the modelling of innovative gas cooled fission reactors

Innovative gas cooled reactors, such as the pebble bed reactor (PBR) and the gas cooled fast reactor (GFR) offer higher efficiency and new application areas for nuclear energy. Numerical methods were applied and developed to analyse the specific features of these reactor types with fully three dimensional calculation models. In the first part of this thesis, discrete element method (DEM) was used for a physically realistic modelling of the packing of fuel pebbles in PBR geometries and methods were developed for utilising the DEM results in subsequent reactor physics and thermal-hydraulics calculations. In the second part, the flow and heat transfer for a single gas cooled fuel rod of a GFR were investigated with computational fluid dynamics (CFD) methods. An in-house DEM implementation was validated and used for packing simulations, in which the effect of several parameters on the resulting average packing density was investigated. The restitution coefficient was found out to have the most significant effect. The results can be utilised in further work to obtain a pebble bed with a specific packing density. The packing structures of selected pebble beds were also analysed in detail and local variations in the packing density were observed, which should be taken into account especially in the reactor core thermal-hydraulic analyses. Two open source DEM codes were used to produce stochastic pebble bed configurations to add realism and improve the accuracy of criticality calculations performed with the Monte Carlo reactor physics code Serpent. Russian ASTRA criticality experiments were calculated. Pebble beds corresponding to the experimental specifications within measurement uncertainties were produced in DEM simulations and successfully exported into the subsequent reactor physics analysis. With the developed approach, two typical issues in Monte Carlo reactor physics calculations of pebble bed geometries were avoided. A novel method was developed and implemented as a MATLAB code to calculate porosities in the cells of a CFD calculation mesh constructed over a pebble bed obtained from DEM simulations. The code was further developed to distribute power and temperature data accurately between discrete based reactor physics and continuum based thermal-hydraulics models to enable coupled reactor core calculations. The developed method was also found useful for analysing sphere packings in general. CFD calculations were performed to investigate the pressure losses and heat transfer in three dimensional air cooled smooth and rib roughened rod geometries, housed inside a hexagonal flow channel representing a sub-channel of a single fuel rod of a GFR. The CFD geometry represented the test section of the L-STAR experimental facility at Karlsruhe Institute of Technology and the calculation results were compared to the corresponding experimental results. Knowledge was gained of the adequacy of various turbulence models and of the modelling requirements and issues related to the specific application. The obtained pressure loss results were in a relatively good agreement with the experimental data. Heat transfer in the smooth rod geometry was somewhat under predicted, which can partly be explained by unaccounted heat losses and uncertainties. In the rib roughened geometry heat transfer was severely under predicted by the used realisable k − epsilon turbulence model. An additional calculation with a v2 − f turbulence model showed significant improvement in the heat transfer results, which is most likely due to the better performance of the model in separated flow problems. Further investigations are suggested before using CFD to make conclusions of the heat transfer performance of rib roughened GFR fuel rod geometries. It is suggested that the viewpoints of numerical modelling are included in the planning of experiments to ease the challenging model construction and simulations and to avoid introducing additional sources of uncertainties. To facilitate the use of advanced calculation approaches, multi-physical aspects in experiments should also be considered and documented in a reasonable detail.