Lawyers & Truth Recovery Mechanisms: South Africa

Focusing on post-apartheid South Africa, the report explores the role of lawyers in truth recovery mechanisms.

The report was prepared by Dr Rachel Killean and draws on a series of interviews conducted in South Africa (with legal academics, ‘struggle’ lawyers, state lawyers, judges and human rights activists) as part of the wider Lawyers, Conflict and Transition project.

Dr Killean begins with an overview of the various roles the legal profession has played in South Africa, both during the apartheid era and post-transition.

The first half of the report then explores the role of lawyers as professional participants – firstly at the South African Truth and Reconciliation Commission and secondly in the Marikana Commission of Inquiry.

The report then considers the notion of lawyers as subjects of truth recovery, looking in particular at the Special Legal Hearing on the legal profession as part of the South African Truth and Reconciliation Commission.

In the concluding section Killean reflects on the extent to which lawyers influence the procedures and outcomes of truth recovery mechanisms and offers some concrete suggestions as to how the involvement of lawyers in such processes might be more effectively managed.

With regard to lawyers as subjects of truth recovery, she acknowledges the limitations of the South African model but posits that the endeavour must be applauded, not least because it demonstrated that it is possible to scrutinise the role of the legal profession in past conflict, and that it is worth wrestling with the associated challenges.

Divided Conquerors: the Rump Parliament, Cromwell's Army and Ireland

This article reassesses the relationship that existed in the period 1649–53 between war in Ireland and politics in England. Drawing upon a largely overlooked Irish army petition, it seeks to remedy an evident disconnect between the respective historiographies of the Cromwellian conquest of Ireland on the one hand and the Rump Parliament on the other. The article reconstructs some of the various disputes over religion, authority and violence that undermined the unity of the English wartime regime in Ireland. It then charts the eventual spilling over of these disputes into Westminster politics, arguing that their impact on deteriorating army-parliament relations in the year prior to Oliver Cromwell’s expulsion of the Rump in April 1653 has not been fully appreciated. The key driver of these developments was John Weaver, a republican MP and commissioner for the civil government of Ireland. The article explains how his efforts both to place restraints on the excessive violence of the conquest and to exert civilian control over the military evolved, by 1652, into a determined campaign at Westminster to strengthen the powers of Ireland’s civil government and to limit the army’s share in the prospective Irish land settlement. Weaver’s campaign forced the army officers in Ireland to intervene at Westminster, thus placing increased pressure on the Rump Parliament. This reassessment also enables the early 1650s to be viewed more clearly as a key phase in the operation of the longer-term relationships of mutual influence that existed between Dublin and London in the seventeenth century.

Time-Independent Discrete Gaussian Sampling for Post-Quantum Cryptography

As the development of a viable quantum computer nears, existing widely used public-key cryptosystems, such as RSA, will no longer be secure. Thus, significant effort is being invested into post-quantum cryptography (PQC). Lattice-based cryptography (LBC) is one such promising area of PQC, which offers versatile, efficient, and high performance security services. However, the vulnerabilities of these implementations against side-channel attacks (SCA) remain significantly understudied. Most, if not all, lattice-based cryptosystems require noise samples generated from a discrete Gaussian distribution, and a successful timing analysis attack can render the whole cryptosystem broken, making the discrete Gaussian sampler the most vulnerable module to SCA. This research proposes countermeasures against timing information leakage with FPGA-based designs of the CDT-based discrete Gaussian samplers with constant response time, targeting encryption and signature scheme parameters. The proposed designs are compared against the state-of-the-art and are shown to significantly outperform existing implementations. For encryption, the proposed sampler is 9x faster in comparison to the only other existing time-independent CDT sampler design. For signatures, the first time-independent CDT sampler in hardware is proposed. 

Tailoring Magnetic, Mechanical and Dielectric Properties of Magnetorheological Elastomers based on Natural Rubber and Iron by Magnetic Field Assisted Curing for Possible Applications

If magnetism is universal in nature, magnetic materials are ubiquitous. A life without magnetism is unthinkable and a day without the influence of a magnetic material is unimaginable. They find innumerable applications in the form of many passive and active devices namely, compass, electric motor, generator, microphone, loud speaker, maglev train, magnetic resonance imaging, data recording and reading, hadron collider etc. The list is endless. Such is the influence of magnetism and magnetic materials in ones day to day life. With the advent of nanoscience and nanotechnology, along with the emergence of new areas/fields such as spintronics, multiferroics and magnetic refrigeration, the importance of magnetism is ever increasing and attracting the attention of researchers worldwide. The search for a fluid which exhibits magnetism has been on for quite some time. However nature has not bestowed us with a magnetic fluid and hence it has been the dream of many researchers to synthesize a magnetic fluid which is thought to revolutionize many applications based on magnetism. The discovery of a magnetic fluid by Jacob Rabinow in the year 1952 paved the way for a new branch of Physics/Engineering which later became magnetic fluids. This gave birth to a new class of material called magnetorheological materials. Magnetorheological materials are considered superior to electrorheological materials in that magnetorheology is a contactless operation and often inexpensive.Most of the studies in the past on magnetorheological materials were based on magnetic fluids. Recently the focus has been on the solid state analogue of magnetic fluids which are called Magnetorheological Elastomers (MREs). The very word magnetorheological elastomer implies that the rheological properties of these materials can be altered by the influence of an external applied magnetic field and this process is reversible. If the application of an external magnetic field modifies the viscosity of a magnetic fluid, the effect of external magnetic stimuli on a magnetorheological elastomer is in the modification of its stiffness. They are reversible too. Magnetorheological materials exhibit variable stiffness and find applications in adaptive structures of aerospace, automotive civil and electrical engineering applications. The major advantage of MRE is that the particles are not able to settle with time and hence there is no need of a vessel to hold it. The possibility of hazardous waste leakage is no more with a solid MRE. Moreover, the particles in a solid MRE will not affect the performance and durability of the equipment. Usually MR solids work only in the pre yield region while MR fluids, typically work in the post yield state. The application of an external magnetic field modifies the stiffness constant, shear modulus and loss modulus which are complex quantities. In viscoelastic materials a part of the input energy is stored and released during each cycle and a part is dissipated as heat. The storage modulus G′ represents the capacity of the material to store energy of deformation, which contribute to material stiffness. The loss modulusG′′ represents the ability of the material to dissipate the energy of deformation. Such materials can find applications in the form of adaptive vibration absorbers (ATVAs), stiffness tunable mounts and variable impedance surfaces. MREs are an important material for automobile giants and became the focus of this research for eventual automatic vibration control, sound isolation, brakes, clutches and suspension systems

Model-driven development of sensor network applications with optimization of non-functional constraints

Wireless sensor networks (WSNs) differ from conventional distributed systems in many aspects. The resource limitation of sensor nodes, the ad-hoc communication and topology of the network, coupled with an unpredictable deployment environment are difficult non-functional constraints that must be carefully taken into account when developing software systems for a WSN. Thus, more research needs to be done on designing, implementing and maintaining software for WSNs. This thesis aims to contribute to research being done in this area by presenting an approach to WSN application development that will improve the reusability, flexibility, and maintainability of the software. Firstly, we present a programming model and software architecture aimed at describing WSN applications, independently of the underlying operating system and hardware. The proposed architecture is described and realized using the Model-Driven Architecture (MDA) standard in order to achieve satisfactory levels of encapsulation and abstraction when programming sensor nodes. Besides, we study different non-functional constrains of WSN application and propose two approaches to optimize the application to satisfy these constrains. A real prototype framework was built to demonstrate the developed solutions in the thesis. The framework implemented the programming model and the multi-layered software architecture as components. A graphical interface, code generation components and supporting tools were also included to help developers design, implement, optimize, and test the WSN software. Finally, we evaluate and critically assess the proposed concepts. Two case studies are provided to support the evaluation. The first case study, a framework evaluation, is designed to assess the ease at which novice and intermediate users can develop correct and power efficient WSN applications, the portability level achieved by developing applications at a high-level of abstraction, and the estimated overhead due to usage of the framework in terms of the footprint and executable code size of the application. In the second case study, we discuss the design, implementation and optimization of a real-world application named TempSense, where a sensor network is used to monitor the temperature within an area.

Genetic manipulation of Anopheles stephensi immunity to increase plasmodium falciparum salivary gland sporozoite infection levels

Human malaria is responsible for over 700,000 deaths a year. To stay abreast of the threat posed by the parasite, a constant stream of new drugs and vector control methods are required. This study focuses on a vaccine that has the potential to protect against parasite infection, but has been hindered by developmental challenges. In malaria prevention, live, attenuated, aseptic, Plasmodium falciparum sporozoites (PfSPZ) can be administered as a highly protective vaccine. PfSPZ are produced using adult female Anopheles stephensi mosquitoes as bioreactors. Production volume and cost of a PfSPZ vaccine for malaria are expected to be directly correlated with Plasmodium falciparum infection intensity in the salivary glands. The sporogonic development of Plasmodium falciparum in A. stephensi to fully infected salivary gland stage sporozoites is dictated by the activities of several known components of the mosquito’s innate immune system. Here I report on the use of genetic technologies that have been rarely, if ever, used in Anopheles stephensi Sda500 to increase the yield of sporozoites per mosquito and enhance vaccine production. By combining the Gal4/UAS bipartite system with in vivo expression of shRNA gene silencing, activity of the IMD signaling pathway downstream effector LRIM1, an antagonist to Plasmodium development, was reduced in the midgut, fat body, and salivary glands of A. stephensi. In infection studies using P. berghei and P. falciparum these transgenic mosquitoes consistently produced significantly more salivary gland stage sporozoites than wildtype controls, with increases in P. falciparum ranging from 2.5 to 10 fold. Using Plasmodium infection assays and qRT-PCR, two novel findings were identified. First, it was shown that 14 days post Plasmodium infection, transcript abundance of the IMD immune effector genes LRIM1, TEP1 and APL1c are elevated, in the salivary glands of A. stephensi, suggesting the salivary glands may play a role in post midgut defense against the parasite. Second, a non-pathogenic IMD signaling pathway response was observed which could suggest an alternative pathway for IMD activation. The information gained from these studies has significantly increased our knowledge of Plasmodium defense in A. stephensi and moreover could significantly improve vaccine production.

The effect of maternal employment on adolescents' transition to young adulthood

The purpose of this study was to examine relationships between multiple characteristics of maternal employment, parenting practices, and adolescents’ transition outcomes to young adulthood. The research addressed four main research questions. First, are the characteristics of maternal work (i.e., hours worked, multiple jobs held, work schedules, earnings, and occupation) related to adolescents’ enrollment in post-secondary education, employment, or involvement in neither of these types of activities as young adults? Second, are the work characteristics related to parental involvement and monitoring, and are the parenting practices related to adolescents’ transition outcomes? Third, do parental involvement and monitoring mediate any relationships between the characteristics of maternal employment and adolescents’ transition outcomes? Finally, do any associations between characteristics of maternal employment and parenting practices and adolescents’ transition outcomes vary by poverty status, race/ethnicity, or gender? To address these research questions, secondary data analysis was conducted, using data from the National Longitudinal Survey of Youth (NLSY) from 1998 through 2004. The study sample consisted of 849 youths who were 15 through 17 years of age in either 1998 or 2000, and were 19 through 21 years of age when their transition outcomes in young adulthood were measured four years later. Multinomial logistic and ordinary least squares regression models were estimated to answer the research questions. Study findings indicated that of the maternal work characteristics, mothers’ multiple jobs held, occupation, and work schedule were significantly related to the youths’ transition outcomes. When mothers held multiple jobs for 1 to 25 weeks per year, and when mothers held jobs involving lower levels of occupational complexity, their youths were more likely to experience employment rather than post-secondary education. Adolescents whose mothers worked a standard work schedule were less likely to experience other types of transitions than post-secondary education. With regard to the effects of maternal employment on parenting practices, none of the maternal work variables were related to parental involvement, and only one variable, mothers working less than 40 hours per week, was negatively related to parental monitoring. In addition, when parents were more involved with their youths’ education, the youths were less likely to transition into employment and other types of transitions rather than post-secondary education. The parenting practices did not mediate the relation between the significant work variables (holding multiple jobs, work schedule, and occupation) and youths’ transition outcomes. Finally, none of the interactions between maternal work characteristics and poverty status, race/ethnicity, and gender met the criteria for determining significance; but in a series of sub-group analyses, some differences according to poverty status and gender were found. Despite the lack of mediation and moderation, the findings of this study have important implications for social policy and social work intervention. Based on the findings, suggestions are made in these areas to improve working mothers’ lives and their adolescents’ development and successful transition to adulthood. Finally, directions for future research are discussed.

Three dimensional study to quantify the relationship between facial hard and soft tissue movement as a result of orthognathic surgery

Introduction Prediction of soft tissue changes following orthognathic surgery has been frequently attempted in the past decades. It has gradually progressed from the classic “cut and paste” of photographs to the computer assisted 2D surgical prediction planning; and finally, comprehensive 3D surgical planning was introduced to help surgeons and patients to decide on the magnitude and direction of surgical movements as well as the type of surgery to be considered for the correction of facial dysmorphology. A wealth of experience was gained and numerous published literature is available which has augmented the knowledge of facial soft tissue behaviour and helped to improve the ability to closely simulate facial changes following orthognathic surgery. This was particularly noticed following the introduction of the three dimensional imaging into the medical research and clinical applications. Several approaches have been considered to mathematically predict soft tissue changes in three dimensions, following orthognathic surgery. The most common are the Finite element model and Mass tensor Model. These were developed into software packages which are currently used in clinical practice. In general, these methods produce an acceptable level of prediction accuracy of soft tissue changes following orthognathic surgery. Studies, however, have shown a limited prediction accuracy at specific regions of the face, in particular the areas around the lips. Aims The aim of this project is to conduct a comprehensive assessment of hard and soft tissue changes following orthognathic surgery and introduce a new method for prediction of facial soft tissue changes.   Methodology The study was carried out on the pre- and post-operative CBCT images of 100 patients who received their orthognathic surgery treatment at Glasgow dental hospital and school, Glasgow, UK. Three groups of patients were included in the analysis; patients who underwent Le Fort I maxillary advancement surgery; bilateral sagittal split mandibular advancement surgery or bimaxillary advancement surgery. A generic facial mesh was used to standardise the information obtained from individual patient’s facial image and Principal component analysis (PCA) was applied to interpolate the correlations between the skeletal surgical displacement and the resultant soft tissue changes. The identified relationship between hard tissue and soft tissue was then applied on a new set of preoperative 3D facial images and the predicted results were compared to the actual surgical changes measured from their post-operative 3D facial images. A set of validation studies was conducted. To include: • Comparison between voxel based registration and surface registration to analyse changes following orthognathic surgery. The results showed there was no statistically significant difference between the two methods. Voxel based registration, however, showed more reliability as it preserved the link between the soft tissue and skeletal structures of the face during the image registration process. Accordingly, voxel based registration was the method of choice for superimposition of the pre- and post-operative images. The result of this study was published in a refereed journal. • Direct DICOM slice landmarking; a novel technique to quantify the direction and magnitude of skeletal surgical movements. This method represents a new approach to quantify maxillary and mandibular surgical displacement in three dimensions. The technique includes measuring the distance of corresponding landmarks digitized directly on DICOM image slices in relation to three dimensional reference planes. The accuracy of the measurements was assessed against a set of “gold standard” measurements extracted from simulated model surgery. The results confirmed the accuracy of the method within 0.34mm. Therefore, the method was applied in this study. The results of this validation were published in a peer refereed journal. • The use of a generic mesh to assess soft tissue changes using stereophotogrammetry. The generic facial mesh played a major role in the soft tissue dense correspondence analysis. The conformed generic mesh represented the geometrical information of the individual’s facial mesh on which it was conformed (elastically deformed). Therefore, the accuracy of generic mesh conformation is essential to guarantee an accurate replica of the individual facial characteristics. The results showed an acceptable overall mean error of the conformation of generic mesh 1 mm. The results of this study were accepted for publication in peer refereed scientific journal. Skeletal tissue analysis was performed using the validated “Direct DICOM slices landmarking method” while soft tissue analysis was performed using Dense correspondence analysis. The analysis of soft tissue was novel and produced a comprehensive description of facial changes in response to orthognathic surgery. The results were accepted for publication in a refereed scientific Journal. The main soft tissue changes associated with Le Fort I were advancement at the midface region combined with widening of the paranasal, upper lip and nostrils. Minor changes were noticed at the tip of the nose and oral commissures. The main soft tissue changes associated with mandibular advancement surgery were advancement and downward displacement of the chin and lower lip regions, limited widening of the lower lip and slight reversion of the lower lip vermilion combined with minimal backward displacement of the upper lip were recorded. Minimal changes were observed on the oral commissures. The main soft tissue changes associated with bimaxillary advancement surgery were generalized advancement of the middle and lower thirds of the face combined with widening of the paranasal, upper lip and nostrils regions. In Le Fort I cases, the correlation between the changes of the facial soft tissue and the skeletal surgical movements was assessed using PCA. A statistical method known as ’Leave one out cross validation’ was applied on the 30 cases which had Le Fort I osteotomy surgical procedure to effectively utilize the data for the prediction algorithm. The prediction accuracy of soft tissue changes showed a mean error ranging between (0.0006mm±0.582) at the nose region to (-0.0316mm±2.1996) at the various facial regions.

Low efficacy of Mebendazole Against Hookworm in Vietman: Two Randomized Controlled Trials

Abstract. Vietnam is participating in a global de-worming effort that aims to treat 650 million school children regularly by 2010. The treatment used in Vietnam is single dose oral mebendazole (Phardazone®) 500 mg. We tested the efficacy of single dose mebendazole 500 mg in the therapy of hookworm infection in a randomized double-blind placebo-controlled trial among 271 Vietnamese schoolchildren. The treatment efficacy of single dose mebendazole in children did not differ significantly from placebo, with a reduction in mean eggs per gram of feces relative to placebo of 31% (95% CI - �9 to 56%, P = 0.1). In light of these findings we then carried out a similar randomized trial comparing triple dose mebendazole, single dose albendazole, and triple dose albendazole against placebo in 209 adults in the same area. The estimated reduction in mean post-treatment eggs per gram of feces relative to placebo was 63% (95% CI 30 - 81%) for triple mebendazole, 75% (47 - 88%) for single albendazole, and 88% (58Ã - 97%) for triple albendazole. Our results suggest that single dose oral mebendazole has low efficacy against hookworm infection in Vietnam, and that it should be replaced by albendazole. These findings are of major public health relevance given the opportunity costs of treating entire populations with ineffective therapies. We recommend that efficacy of anti-helminth therapies is pilot tested before implementation of national gut worm control programs.

Improving the assessment and outcome of free tissue transfer breast reconstruction

Introduction: Free tissue transfer using an abdominal tissue flap is a commonly used method of breast reconstruction. However, there are well recognised complications including venous congestion, fat necrosis and flap loss associated with the perfusion of these flaps. Post-operative aesthetic outcome assessment of such breast reconstructions have also proven to be difficult with current methods displaying poor inter-rater reliability and patient correlation. The aim of this research was to investigate potential improvements to the post-operative outcome of free abdominal tissue transfer breast reconstruction by assessing the effects of vascular augmentation interventions on flap perfusion and to assess the use of real-time digital video as a post-operative assessment tool. Methods: An in-vivo pilot study carried out on 12 patients undergoing DIEP flap breast reconstruction assessed the effect on Zone IV perfusion, using LDI and ICG angiography, of vascular augmentation of the flap using the contralateral SIEA and SIEV. A further animal experimental study was carried out on 12 Sprague Dawley rats to assess the effects on main pedicle arterial blood flow and on Zone I and Zone IV perfusion of vascular augmentation of the abdominal flap using the contralateral vascular system. A separate post-operative assessment study was undertaken on 35 breast reconstruction patients who evaluated their own reconstructions via patient questionnaire and underwent photograph and real-time digital video capture of their reconstructions with subsequent panel assessment. Results: Our results showed that combined vascular augmentation of DIEP flaps, using both the SIEA and SIEV together, led to an increase in Zone IV perfusion. Vascular augmentation of the rat abdominal flaps also led to a significant increase in Zone I/IV perfusion, but the augmentation procedure resulted in a decreased main pedicle arterial blood flow. Our post-operative assessment study revealed that real-time digital video footage led to greater inter-rater agreement with regards to cosmesis and shape than photography and also correlated more with patient self-assessment. Conclusion: Vascular augmentation of abdominal free tissue flaps using the contralateral vascular system results in an increase to Zone IV perfusion, however this may lead to decreased main pedicle arterial blood flow. Real-time digital video is a valid post-operative aesthetic assessment method of breast reconstruction outcome and is superior to static photography when coupled with panel assessment.

Rethinking Open Science: The Role of Communication

The first version of this text was presented in the “Philosophy of Communication” section at the ECREA’s 5th European Communication Conference, “Communication for Empowerment,” in Lisbon in November 2014. I would like to thank the audience for the lively post-presentation discussion.

Men's experiences of receiving objective feedback on physical activity and other indicators of health risk, within the context of a gender-sensitised weight loss intervention

Receiving personalised feedback on body mass index and other health risk indicators may prompt behaviour change. Few studies have investigated men’s reactions to receiving objective feedback on such measures and detailed information on physical activity and sedentary time. The aim of my research was to understand the meanings different forms of objective feedback have for overweight/obese men, and to explore whether these varied between groups. Participants took part in Football Fans in Training, a gender-sensitised, weight loss programme delivered via Scottish Professional Football Clubs. Semi-structured interviews were conducted with 28 men, purposively sampled from four clubs to investigate the experiences of men who achieved and did not achieve their 5% weight loss target. Data were analysed using the principles of thematic analysis and interpreted through Self-Determination Theory and sociological understandings of masculinity. Several factors were vital in supporting a ‘motivational climate’ in which men could feel ‘at ease’ and adopt self-regulation strategies: the ‘place’ was described as motivating, whereas the ‘people’ (other men ‘like them’; fieldwork staff; community coaches) provided supportive and facilitative roles. Men who achieved greater weight loss were more likely to describe being motivated as a consequence of receiving information on their objective health risk indicators. They continued using self-monitoring technologies after the programme as it was enjoyable; or they had redefined themselves by integrating new-found activities into their lives and no longer relied on external technologies/feedback. They were more likely to see post-programme feedback as confirmation of success, so long as they could fully interpret the information. Men who did not achieve their 5% weight loss reported no longer being motivated to continue their activity levels or self-monitor them with a pedometer. Social support within the programme appeared more important. These men were also less positive about objective post-programme feedback which confirmed their lack of success and had less utility as a motivational tool. Providing different forms of objective feedback to men within an environment that has intrinsic value (e.g. football club setting) and congruent with common cultural constructions of masculinity, appears more conducive to health behaviour change.

„Przemoc pokazywania” w twórczości filmowej Davida Finchera

Wydział Filologii Polskiej i Klasycznej

A Transformative Olympic Village: The Washington 2024 Post-Games Legacy

This thesis explores the Modern Olympic Games to strategically design an Olympic Village for Washington D.C. that plans not just to house athletes, but to provide a vision for the post-Games city. Through discovery of the spirit and meaning behind one of the world’s biggest events and analysis of various post-Games Villages, the proposed Olympic Village will innovate the future of Washington D.C.’s Southeast region. Study of existing mixed-use architecture, urban planning, and adaptation will help formulate an Olympic Village design. It is the intention that the Olympic Village, much like its athletes, will emulate the Olympic motto “Citius, Altius, Fortius,” meaning “Faster, Higher, Stronger.” The objective is to establish a village that allows for a faster turnaround in post-Olympic design, utilizes higher standards, and uses stronger applications to building a more sustainable city.

Europeanization beyond the EU: The case of Georgia.

320 p.