Dynamic modelling and analysis of hydraulic forces in radial blood pumps

Dissertação de mestrado integrado em Biomedical Engineering Biomaterials, Biomechanics and Rehabilitation

Dynamic interface model for masonry walls subjected to high strain rate out-of-plane loads

The present study proposes a dynamic constitutive material interface model that includes non-associated flow rule and high strain rate effects, implemented in the finite element code ABAQUS as a user subroutine. First, the model capability is validated with numerical simulations of unreinforced block work masonry walls subjected to low velocity impact. The results obtained are compared with field test data and good agreement is found. Subsequently, a comprehensive parametric analysis is accomplished with different joint tensile strengths and cohesion, and wall thickness to evaluate the effect of the parameter variations on the impact response of masonry walls.

Influence of the hip joint modeling approaches on the kinematics of human gait

The influence of the hip joint formulation on the kinematic response of the model of human gait is investigated throughout this work. To accomplish this goal, the fundamental issues of the modeling process of a planar hip joint under the framework of multibody systems are revisited. In particular, the formulations for the ideal, dry, and lubricated revolute joints are described and utilized for the interaction of femur head inside acetabulum or the hip bone. In this process, the main kinematic and dynamic aspects of hip joints are analyzed. In a simple manner, the forces that are generated during human gait, for both dry and lubricated hip joint models, are computed in terms of the system’s state variables and subsequently introduced into the dynamics equations of motion of the multibody system as external generalized forces. Moreover, a human multibody model is considered, which incorporates the different approaches for the hip articulation, namely ideal joint, dry, and lubricated models. Finally, several computational simulations based on different approaches are performed, and the main results presented and compared to identify differences among the methodologies and procedures adopted in this work. The input conditions to the models correspond to the experimental data capture from an adult male during normal gait. In general, the obtained results in terms of positions do not differ significantly when the different hip joint models are considered. In sharp contrast, the velocity and acceleration plotted vary significantly. The effect of the hip joint modeling approach is clearly measurable and visible in terms of peaks and oscillations of the velocities and accelerations. In general, with the dry hip model, intra-joint force peaks can be observed, which can be associated with the multiple impacts between the femur head and the cup. In turn, when the lubricant is present, the system’s response tends to be smoother due to the damping effects of the synovial fluid.

Formação continuada de professores para o uso das tecnologias educativas: um estudo de caso sobre o discurso e a prática

Tese de Doutoramento em Ciências da Educação (Especialidade de Tecnologia Educativa)

Estudo da cabeceira da Sé do Porto

Dissertação de mestrado integrado em Engenharia Civil

Flow updating: fault-tolerant aggregation for dynamic networks

Documento submetido para revisão pelos pares. A publicar em Journal of Parallel and Distributed Computing. ISSN 0743-7315

Dynamic wet etching of silicon through isopropanol alcohol evaporation

In this paper, Isopropanol (IPA) availability during the anisotropic etching of silicon in Potassium Hydroxide (KOH) solutions was investigated. Squares of 8 to 40 m were patterned to (100) oriented silicon wafers through DWL (Direct Writing Laser) photolithography. The wet etching process was performed inside an open HDPE (High Density Polyethylene) flask with ultrasonic agitation. IPA volume and evaporation was studied in a dynamic etching process, and subsequent influence on the silicon etching was inspected. For the tested conditions, evaporation rates for water vapor and IPA were determined as approximately 0.0417 mL/min and 0.175 mL/min, respectively. Results demonstrate that IPA availability, and not concentration, plays an important role in the definition of the final structure. Transversal SEM (Scanning Electron Microscopy) analysis demonstrates a correlation between microloading effects (as a consequence of structure spacing) and the angle formed towards the (100) plane.

Supercritical fluid and pharmaceutical applications. Part I: Process classification

The supercritical fluid technology has been target of many pharmaceuticals investigations in particles production for almost 35 years. This is due to the great advantages it offers over others technologies currently used for the same purpose. A brief history is presented, as well the classification of supercritical technology based on the role that the supercritical fluid (carbon dioxide) performs in the process.

Algumas considerações sobre o princípio da culpa enquanto factor de autonomização do Direito das Contra-ordenações

Dissertação de mestrado em Direito Judiciário

Integration methods in dynamic analysis

"Series title: Springerbriefs in applied sciences and technology, ISSN 2191-530X"

Dynamic three-dimensional reconstruction of the heart by transesophageal echocardiography

OBJECTIVE: To evaluate echocardiography accuracy in performing and obtaining images for dynamical three-dimensional (3D) reconstruction. METHODS: Three-dimensional (3D) image reconstruction was obtained in 20 consecutive patients who underwent transesophageal echocardiography. A multiplanar 5 MHz transducer was used for 3D reconstruction. RESULTS: Twenty patients were studied consecutively. The following cardiac diseases were present: valvar prostheses-6 (2 mitral, 2 aortic and 2 mitral and aortic); mitral valve prolapse- 3; mitral and aortic disease - 2; aortic valve disease- 5; congenital heart disease- 3 (2 atrial septal defect- ASD - and 1 transposition of the great arteries -TGA); arteriovenous fistula- 1. In 7 patients, color Doppler was also obtained and used for 3D flow reconstruction. Twenty five cardiac structures were acquired and 60 reconstructions generated (28 of mitral valves, 14 of aortic valves, 4 of mitral prostheses, 7 of aortic prostheses and 7 of the ASD). Fifty five of 60 (91.6%) reconstructions were considered of good quality by 2 independent observers. The 11 reconstructed mitral valves/prostheses and the 2 reconstructed ASDs provided more anatomical information than two dimensional echocardiography (2DE) alone. CONCLUSION: 3D echocardiography using a transesophageal transducer is a feasible technique, which improves detection of anatomical details of cardiac structures, particularly of the mitral valve and atrial septum.

Critical events in mechanically ventilated patients

Mechanical Ventilation is an artificial way to help a Patient to breathe. This procedure is used to support patients with respiratory diseases however in many cases it can provoke lung damages, Acute Respiratory Diseases or organ failure. With the goal to early detect possible patient breath problems a set of limit values was defined to some variables monitored by the ventilator (Average Ventilation Pressure, Compliance Dynamic, Flow, Peak, Plateau and Support Pressure, Positive end-expiratory pressure, Respiratory Rate) in order to create critical events. A critical event is verified when a patient has a value higher or lower than the normal range defined for a certain period of time. The values were defined after elaborate a literature review and meeting with physicians specialized in the area. This work uses data streaming and intelligent agents to process the values collected in real-time and classify them as critical or not. Real data provided by an Intensive Care Unit were used to design and test the solution. In this study it was possible to understand the importance of introduce critical events for Mechanically Ventilated Patients. In some cases a value is considered critical (can trigger an alarm) however it is a single event (instantaneous) and it has not a clinical significance for the patient. The introduction of critical events which crosses a range of values and a pre-defined duration contributes to improve the decision-making process by decreasing the number of false positives and having a better comprehension of the patient condition.

Patrones dinámicos de abundancia y dispersión de una plaga en un paisaje heterogéneo. Dynamic patterns of abundance and dispersion of a pest in a heterogeneous landscape.

El desarrollo de conocimiento empírico sobre cómo la heterogeneidad espacial de un paisaje afecta los patrones de movimiento de una especie animal es considerado una prioridad para el manejo y la conservación de las especies y sus hábitats. En el caso de los insectos plaga, estos estudios resultan importantes ya que aportan las bases teóricas y empíricas fundamentales para su manejo. La persistencia de éstas especies en un paisaje modificado depende de la interrelación entre procesos ecológicos y la estructura del paisaje, tales como la interacción entre especies, la disponibilidad de parches hábitat y la influencia de las prácticas de manejo. El análisis de éstos procesos en un agroecosistema permite simplificar los modelos de heterogeneidad espacial, debido a que los lotes de cultivo son internamente homogéneos y los disturbios antropogénicos generalmente ocurren a la escala de parche, permitiendo determinar las respuestas de los insectos a dicha escala. La alfalfa (Medicago sativa) es un recurso fundamental para la producción agropecuaria y en Argentina, es el recurso forrajero más importante, constituyendo la base de la producción ganadera del país. Actualmente se cultivan alrededor de 5 millones de hectáreas, de las cuales un millón se siembran en la provincia de Córdoba. Además, cumple un rol importante en la sustentabilidad de los sistemas de producción por su función de recuperación de la fertilidad y estabilidad edáfica. La isoca de la alfalfa (Colias lesbia) es la plaga principal del cultivo, produciendo en promedio la pérdida de un corte por año. La hipótesis principal de nuestro trabajo es que los patrones de abundancia y movilidad de la isoca de la alfalfa son afectados por la estructura del paisaje y las prácticas de manejo. Los objetivos específicos del proyecto son: (a) Establecer el efecto de la estructura del paisaje y y el manejo del cultivo en la abundancia de los distintos estadios de Colias lesbia. (b) Determinar los patrones de dispersión de Colias lesbia en relación a la heterogeneidad espacial del paisaje (c) Generar un modelo predictivo de la abundancia de Colias lesbia según la estructura espacial del paisaje, el clima y el manejo del cultivo. (d) Desarrollar un conjunto de recomendaciones de manejo a escala regional para el control de la isoca de la alfalfa. Para ello se elegirán lotes de alfalfa en la región este de la provincia de Córdoba, en el departamento de San Justo, donde se realizará un relevamiento inicial del área de estudio y se dialogará con los productores. Paralelamente, se realizará una clasificación supervisada del área de estudio a partir de escenas de imágenes Landsat TM. En los parches seleccionados, durante 3 años y durante los meses de verano, se muestrearán quincenalmente los distintos estadios de Colias lesbia. Se realizarán análisis de correlación y regresión entre las variables independientes (métricas de la configuración y dinámica del paisaje) y las variables dependientes, (abundancia media de los diferentes estadios de las poblaciones). Asimismo, se realizarán experimentos de marcado-liberación-recaptura para determinar cómo el movimiento de la especie depende de la estructura del paisaje. Para modelar el movimiento inherente de la especie se combinará la información obtenida en el campo con un modelo de difusión utilizando métodos bayesianos. Se espera obtener modelos que permitan comprender los mecanismos que generan los patrones observados. Con esta información se propondrán lineamientos generales y específicos para un manejo de la isoca de la alfalfa a escala regional. En tal sentido, se espera aportar información para restringir la dispersión de la plaga, y reducir los costos y perjuicios del control químico que podrían evitarse con la aplicación de prácticas de manejo integrado y de "manejo de área" que minimicen el impacto de la plaga como también contribuir al conocimiento general de la ecología de insectos.

DINAMICA MICROBIANA Y CALIDAD DE LA MATERIA ORGANICA DEL SUELO COMO INDICADORES DE SUSTENTABILIDAD EN EL CHACO ARIDO DE LA PROVINCIA DE CORDOBA Microbial dynamic and organic matter quality as indicators of soil sustainability in Dry Chaco of Córdoba Province

Se propone analizar el efecto del uso productivo en el Chaco Árido de la provincia de Córdoba, mediante la aplicación de indicadores de sustentabilidad relacionados con la calidad de la materia orgánica y la liberación de nutrientes en el suelo, con la finalidad de aportar a un tema de suma interes para la provincia de Córdoba como es la formulación de criterios y pautas de manejo para la implementación de la Ley de Bosques (N° 26331). Se trabajará en la localidad de San Miguel en el departamento Pocho, en un sitio de bosque no disturbado y en tres sistemas productivos: desmonte selectivo con implantación de pasturas; desmonte total con agricultura bajo riego y desmonte total sobrepastoreado. En cada sitio se medirá “in situ” la emisión de CO2 y se tomaran muestras de suelo a las que se les determinará: a) contenido de materia orgánica total (MO), b) contenido de sustancias húmicas (SH), diferenciando ácidos húmicos (AH) y fúlvicos (AF), c) abundancia y actividad de microorganismos nitrificadores y d) propiedades químicas de los AH y AF. Se calcularán los siguientes índices de sustentabilidad a) materia orgánica biodisponible (MOB=MO–SH); b) índice de humificación (IH=SH/MO); c) tipo de humus (TH=AF/AH; d) índice de mineralización de C (IMC=CO2/MO); e) índice de nitrificación (IN=actividad/abundancia); y f) índice de estabilidad de las fracciones humificadas: compuestos aromáticos/ alifáticos. Los datos serán analizados estadísticamente mediante ANOVA y comparación de medias por LSD (P<0.05) y tests multivariados. We proposed analyze the effect of land use in Arid Chaco of Cordoba province, using sustainability indicators related to organic matter quality and nutrient release in soil, with the aim to formulate management criteria for the implementation of the Ley de Bosques (N° 26331) in Córdoba province. The study will be conducted in San Miguel village in Pocho department, in one undisturbed forest site and three productive systems: selective clearing with grass sowing; total clearing with irrigation agriculture and total clearing with overgrazed. In each site "in situ" CO2 emission will be measured and soil samples will be taken, in which the following parameters will be determined: a) total organic matter content (MO), b) humic substances content (SH), in humic acids (AH) and fulvic acids (AF), c) abundance and activity of nitrifier microorganisms and d) chemical properties of AH and AF. The sustainability indexes will be calculated: biodisponible organic matter (MOB=MO–SH); b) humification index (IH=SH/MO); c) humus type (TH=AF/AH; d) C mineralization index (IMC=CO2/MO); e) nitrifying index (IN=activity/abundance); and f) humic fractions stability index: aromatic/aliphatic compounds. The data will be statistically analyzed by ANOVA and the means will be compared by LSD (P<0.05) and multivariate tests.

Dynamic potential fields for guided exploration in virtual environments

Dynamic potential fields, guided exploration, virtual environments, navigation