Staphylococcal toxin genes in strains isolated from cows with subclinical mastitis

The present study was carried out in 11 dairy herds in four municipal districts of the rural area of the State of Pernambuco, Brazil. Out of 984 quarter milk (246 cows), 10 (1.0%) were positive for clinical mastitis, 562 (57.1%) for subclinical mastitis and 412 (41.9%) were negative. A total of 81 Staphylococcus spp. isolates were obtained from milk samples from the cows diagnosed with subclinical mastitis. From these, 53 (65.0%) were S. aureus, 16 (20.0%) coagulase-positive staphylococci (CPS) and 12 (15.0%) coagulase-negative staphylococci (CNS). The isolates were further investigated for the presence of toxin genes by multiplex and uniplex PCR. The main gene observed was seg followed by seh, sei and sej. The distribution of these observed genes among the isolates obtained from different areas showed a regional pattern for the SEs. The presence of toxin genes in the strains isolated from bovine milk demonstrates a potential problem for public health.

Infection of sparrows (Passer domesticus) and different mice strains with Lawsonia intracellularis

The susceptibility of sparrows (Passer domesticus) and strains of mice (Swiss, BALB/c, C-57 and DB-A) to Lawsonia intracellularis infection was studied. Thirty-two sparrows were inoculated with pure culture of L. intracellularis and eleven received sham inoculum. Feces were collected on -1, 7, 14 and 21 days post infection (dpi) for detection of L. intracellularis by PCR. After 21 days, all sparrows were euthanized and the tissues processed for histology and immunohistochemistry (IHC). One hundred sixty mice of four different strains (n=40, per strain) were used. For each mouse strain, 16 animals received mucosa homogenate from a pig infected with L. intracellularis, 16 received pure culture of L. intracellularis and eight animals received sham inoculum. Two control and four inoculated mice from each group were euthanized on 7, 14, 21 and 28 dpi. Sections of intestine were collected for histologic analysis and IHC and pooled feces were collected for L. intracellularis PCR. None of the sparrows had any histologic lesions characteristic of proliferative enteropathy or antigen labeling by IHC. All sparrow fecal samples were negative by PCR. All mice strains studied had histopathological lesions typical of PE and IHC labeling consistent with L. intracellularis infection, especially those animals inoculated with pure culture. The most severe lesions were observed in DB-A and Swiss mice. Fecal shedding was detected in all mice strains, with peak at 14 dpi. We conclude that sparrows do not seem to be relevant in the epidemiology of L. intracellularis. The results showed variations in the lesions among the four mice strains used.

Geometric nonlinear dynamic analysis of plates and shells using eight-node hexahedral finite elements with reduced integration

This work presents a geometric nonlinear dynamic analysis of plates and shells using eight-node hexahedral isoparametric elements. The main features of the present formulation are: (a) the element matrices are obtained using reduced integrations with hourglass control; (b) an explicit Taylor-Galerkin scheme is used to carry out the dynamic analysis, solving the corresponding equations of motion in terms of velocity components; (c) the Truesdell stress rate tensor is used; (d) the vector processor facilities existing in modern supercomputers were used. The results obtained are comparable with previous solutions in terms of accuracy and computational performance.

Application of the finite element method in cold forging processes

The demand for more efficient manufacturing processes has been increasing in the last few years. The cold forging process is presented as a possible solution, because it allows the production of parts with a good surface finish and with good mechanical properties. Nevertheless, the cold forming sequence design is very empirical and it is based on the designer experience. The computational modeling of each forming process stage by the finite element method can make the sequence design faster and more efficient, decreasing the use of conventional "trial and error" methods. In this study, the application of a commercial general finite element software - ANSYS - has been applied to model a forming operation. Models have been developed to simulate the ring compression test and to simulate a basic forming operation (upsetting) that is applied in most of the cold forging parts sequences. The simulated upsetting operation is one stage of the automotive starter parts manufacturing process. Experiments have been done to obtain the stress-strain material curve, the material flow during the simulated stage, and the required forming force. These experiments provided results used as numerical model input data and as validation of model results. The comparison between experiments and numerical results confirms the developed methodology potential on die filling prediction.

An alternative finite element formulation for determination of streamlines in two-dimensional problems

It is well known that the numerical solutions of incompressible viscous flows are of great importance in Fluid Dynamics. The graphics output capabilities of their computational codes have revolutionized the communication of ideas to the non-specialist public. In general those codes include, in their hydrodynamic features, the visualization of flow streamlines - essentially a form of contour plot showing the line patterns of the flow - and the magnitudes and orientations of their velocity vectors. However, the standard finite element formulation to compute streamlines suffers from the disadvantage of requiring the determination of boundary integrals, leading to cumbersome implementations at the construction of the finite element code. In this article, we introduce an efficient way - via an alternative variational formulation - to determine the streamlines for fluid flows, which does not need the computation of contour integrals. In order to illustrate the good performance of the alternative formulation proposed, we capture the streamlines of three viscous models: Stokes, Navier-Stokes and Viscoelastic flows.

Behavior of Bradyrhizobium japonicum strains under different herbicide concentrations

The Bradyrhizobium japonicun strains SEMIA 5073, SEMIA 5074, SEMIA 5079 and SEMIA 5080 were grown in vitro using Vincent medium combined with different rates of the herbicides imazaquin (0, 0.04, 0.12, 0.24, 0.36 mg a.i. g-1), clomazone (0, 0.4, 0.8, 1.6 and 3.2 mg a.i. g-1) and sulfentrazone (0, 0.2, 0.4, 0.8 and 1.6 mg a.i. g-1) to evaluate the strains tolerance to herbicides. The three herbicides drastically inhibited all the rhizobium strains tested, showing a significant decrease of the CFU number as a function of herbicide rates. The rhizobium strains presented a differentiated tolerance to the herbicides. The herbicide rates that reduced 50% (I50) of the growth or survival of the rhizobium strains were below the recommended sprayed rates for weed control in the soybean crop, for all the three herbicides studied; however, sulfentrazone I50 was smaller than imazaquin and clomazone I50.

Growth of red and green strains of the tropical agarophyte Gracilaria cornea J. Agardh (Gracilariales, Rhodophyta) in laboratory

Gracilaria cornea J. Agardh is an important agarophyte occurring in the western Atlantic Ocean. Green colour individuals of G. cornea were found in a natural population, growing next to red individuals, which were more common. Due to the importance of colour strains in genetic and intraspecific variability studies, this work aimed to characterize the red and green strains evaluating different nutritional and light conditions. Red and green gametophytes were cultivated at 14:10 light: dark cycle, with alternating aeration periods of 30 min. Two different enriched solutions were tested: von Stosch (VSS) at concentrations reduced to 12.5% and 25%; and Provasoli (PES) at concentrations reduced to 25% and 50%, and 100%. Red and green gametophytes were cultivated at the irradiance of 45 mumol photons m-2 s-1. In another experiment utilizing PES 100%, two sources of light (Osram 40 W daylight fluorescent tubes and Sylvania Designer 3,500 tubes) were tested at irradiances of 90 and 180 mumol photons m-2 s-1. Growth rates (GR) were evaluated for five weeks. Gametophytes developed few branches and reproductive structures were not induced. Differences were not observed between GR of red and green strains in the conditions tested. GR were higher in VSS 12.5% (8.4% day-1) than in 25% (7.1% day-1), suggesting an adaptation of the species to low nutrient concentrations. GR were higher at 180 (9.0% day-1) than at 90 mumol photons m-2 s-1 (6.3% day-1). These results suggest that G. cornea should be cultivated in laboratory at high irradiances and low nutrient concentrations. These data will be useful in future genetic and physiological studies of the species.

Characterization of six rat strains (Rattus norvegicus) by mitochondrial DNA restriction fragment length polymorphism

Restriction fragment length polymorphism (RFLP) was used to examine the extent of mtDNA polymorphism among six strains of rats (Rattus norvegicus) - Wistar, Wistar Munich, Brown Norway, Wistar Kyoto, SHR and SHR-SP. A survey of 26 restriction enzymes has revealed a low level of genetic divergence among strains. The sites of cleavage by EcoRI, NcoI and XmnI were shown to be polymorphic. The use of these three enzymes allows the 6 strains to be classified into 4 haplotypes and identifies specific markers for each one. The percentage of sequence divergence among all pairs of haplotypes ranged from 0.035 to 0.33%, which is the result of a severe population constriction undergone by the strains. These haplotypes are easily demonstrable and therefore RFLP analysis can be employed for genetic monitoring of rats within animal facilities or among different laboratories.

Hydrolysis of xylans by enzyme systems from solid cultures of Trichoderma harzianum strains

Xylanase activity was isolated from crude extracts of Trichoderma harzianum strains C and 4 grown at 28oC in a solid medium containing wheat bran as the carbon source. Enzyme activity was demonstrable in the permeate after ultrafiltration of the crude extracts using an Amicon system. The hydrolysis patterns of different xylans and paper pulps by xylanase activity ranged from xylose, xylobiose and xylotriose to higher xylooligosaccharides. A purified ß-xylosidase from the Trichoderma harzianum strain released xylose, xylobiose and xylotriose from seaweed, deacetylated, oat spelt and birchwood xylans. The purified enzyme was not active against acetylated xylan and catalyzed the hydrolysis of xylooligosaccharides, including xylotriose, xylotetraose and xylopentaose. However, the enzyme was not able to degrade xylohexaose. Xylanase pretreatment was effective for hardwood kraft pulp bleaching. Hardwood kraft pulp bleached in the XEOP sequence had its kappa number reduced from 13.2 to 8.9 and a viscosity of 20.45 cp. The efficiency of delignification was 33%.

Development of finite elements for analysis of biomechanical structures using flexible multibody formulations

The absolute nodal coordinate formulation was originally developed for the analysis of structures undergoing large rotations and deformations. This dissertation proposes several enhancements to the absolute nodal coordinate formulation based finite beam and plate elements. The main scientific contribution of this thesis relies on the development of elements based on the absolute nodal coordinate formulation that do not suffer from commonly known numerical locking phenomena. These elements can be used in the future in a number of practical applications, for example, analysis of biomechanical soft tissues. This study presents several higher-order Euler–Bernoulli beam elements, a simple method to alleviate Poisson’s and transverse shear locking in gradient deficient plate elements, and a nearly locking free gradient deficient plate element. The absolute nodal coordinate formulation based gradient deficient plate elements developed in this dissertation describe most of the common numerical locking phenomena encountered in the formulation of a continuum mechanics based description of elastic energy. Thus, with these fairly straightforwardly formulated elements that are comprised only of the position and transverse direction gradient degrees of freedom, the pathologies and remedies for the numerical locking phenomena are presented in a clear and understandable manner. The analysis of the Euler–Bernoulli beam elements developed in this study show that the choice of higher gradient degrees of freedom as nodal degrees of freedom leads to a smoother strain field. This improves the rate of convergence.

Antimicrobial resistance among invasive Haemophilus influenzae strains: results of a Brazilian study carried out from 1996 through 2000

A total of 1712 strains of Haemophilus influenzae isolated from patients with invasive diseases were obtained from ten Brazilian states from 1996 to 2000. ß-Lactamase production was assessed and the minimum inhibitory concentrations (MIC) of ampicillin, chloramphenicol, ceftriaxone and rifampin were determined using a method for broth microdilution of Haemophilus test medium. The prevalence of strains producing ß-lactamase ranged from 6.6 to 57.7%, with an overall prevalence of 18.4%. High frequency of ß-lactamase-mediated ampicillin resistance was observed in Distrito Federal (25%), São Paulo (21.7%) and Paraná (18.5%). Of the 1712 strains analyzed, none was ß-lactamase negative, ampicillin resistant. A total of 16.8% of the strains were resistant to chloramphenicol, and 13.8% of these also presented resistance to ampicillin, and only 3.0% were resistant to chloramphenicol alone. All strains were susceptible to ceftriaxone and rifampin and the MIC90 were 0.015 µg/ml and 0.25 µg/ml, respectively. Ceftriaxone is the drug of choice for empirical treatment of bacterial meningitis in pediatric patients who have not been screened for drug susceptibility. The emergence of drug resistance is a serious challenge for the management of invasive H. influenzae disease, which emphasizes the fundamental role of laboratory-based surveillance for antimicrobial resistance.

Occurrence of Haemophilus influenzae strains in three Brazilian states since the introduction of a conjugate Haemophilus influenzae type b vaccine

Few vaccines in history have induced such a dramatic decline in incidence over such a short period of time as the Haemophilus influenzae type b (Hib) conjugate. This vaccine was introduced in 1988 in the United States, but only in 1999 was Hib immunization introduced by the Brazilian Ministry of Health as part of the routine infant National Immunization Program. The authors analyzed 229 H. influenzae (Hi) isolates from Public Health Laboratories in three Brazilian states: Pernambuco (Northeast, N = 54), Santa Catarina (South, N = 19), and Rio de Janeiro (Southeast, N = 156). The isolates were collected from Brazilian children 0-10 years of age with meningitis and other infections from 1990 to 2003 and were part of the research collection of the National Institute of Quality Control in Health, FIOCRUZ. Bacterial strains were characterized by serotyping and biotyping. During the pre-vaccination period the prevalence infection due to Hib was of 165 isolates and only 2 non-b Hi among all the notified meningitis infections caused by Hi. Our results showed a significant decrease in the prevalence of Hib meningitis from 165 to 33 isolates after 1999. However, during the post-vaccination period of 2001-2003 we observed an increase in the number of non-b Hi isolates: only 2 non-b strains isolated from 1990 to 1999 and 29 from 1999 to 2003. Based on the present data, the authors emphasize the need for more sensitive epidemiological and bacteriological studies aiming the improvement of the available Hib vaccine, in order to protect the susceptible population to infections due to other serological types of Hi and the reevaluation of immunization schedules used by the National Immunization Program.

Numerical simulation of two-chamber plasma sources using finite element method

Numerical simulation of plasma sources is very important. Such models allows to vary different plasma parameters with high degree of accuracy. Moreover, they allow to conduct measurements not disturbing system balance.Recently, the scientific and practical interest increased in so-called two-chamber plasma sources. In one of them (small or discharge chamber) an external power source is embedded. In that chamber plasma forms. In another (large or diffusion chamber) plasma exists due to the transport of particles and energy through the boundary between chambers.In this particular work two-chamber plasma sources with argon and oxygen as active mediums were onstructed. This models give interesting results in electric field profiles and, as a consequence, in density profiles of charged particles.

Epidemiological characterization of resistance and PCR typing of Shigella flexneri and Shigella sonnei strains isolated from bacillary dysentery cases in Southeast Brazil

Shigella spp are Gram-negative, anaerobic facultative, non-motile, and non-sporulated bacilli of the Enterobacteriaceae family responsible for "Shigellosis" or bacillary dysentery, an important cause of worldwide morbidity and mortality. However, despite this, there are very few epidemiological studies about this bacterium in Brazil. We studied the antibiotic resistance profiles and the clonal structure of 60 Shigella strains (30 S. flexneri and 30 S. sonnei) isolated from shigellosis cases in different cities within the metropolitan area of Campinas, State of São Paulo, Brazil. We used the following well-characterized molecular techniques: enterobacterial repetitive intergenic consensus, repetitive extragenic palindromic, and double-repetitive element-polymerase chain reaction to characterize the bacteria. Also, the antibiotic resistance of the strains was determined by the diffusion disk method. Many strains of S. flexneri and S. sonnei were found to be multi-resistant. S. flexneri strains were resistant to ampicillin in 83.3% of cases, chloramphenicol in 70.0%, streptomycin in 86.7%, sulfamethoxazole in 80.0%, and tetracycline in 80.0%, while a smaller number of strains were resistant to cephalothin (3.3%) and sulfazotrim (10.0%). S. sonnei strains were mainly resistant to sulfamethoxazole (100.0%) and tetracycline (96.7%) and, to a lesser extent, to ampicillin (6.7%) and streptomycin (26.7%). Polymerase chain reaction-based typing supported the existence of specific clones responsible for the shigellosis cases in the different cities and there was evidence of transmission between cities. This clonal structure would probably be the result of selection for virulence and resistance phenotypes. These data indicate that the human sanitary conditions of the cities investigated should be improved.

Trailing end-point phenotype antibiotic-sensitive strains of Candida albicans produce different amounts of aspartyl peptidases

Candida albicans is an opportunistic fungal pathogen that causes severe systemic infections in immunosuppressed individuals. C. albicans resistance to antifungal drugs is a severe problem in patients receiving prolonged therapy. Moreover, trailing yeast growth, which is defined as a resistant MIC after 48 h of incubation with triazole antifungal agents but a susceptible MIC after 24 h, has been noted in tests of antifungal susceptibility against some C. albicans isolates. In this context, we recently noticed this phenomenon in our routine susceptibility tests with fluconazole/itraconazole and C. albicans clinical isolates. In the present study, we investigated the production of cell-associated and secreted aspartyl peptidases (Saps) in six trailing clinical isolates of C. albicans, since this class of hydrolytic enzymes is a well-known virulence factor expressed by this fungal pathogen. Sap2, which is the best-studied member of the Sap family, was detected by flow cytometry on the cell surface of yeasts and as a 43-kDa polypeptide in the culture supernatant, as demonstrated by Western blotting assay using an anti-Sap1-3 polyclonal antibody. Released aspartyl peptidase activity was measured with BSA hydrolysis and inhibited by pepstatin A, showing distinct amounts of proteolytic activity ranging from 5.7 (strain 44B) to 133.2 (strain 11) arbitrary units. Taken together, our results showed that trailing clinical isolates of C. albicans produced different amounts of both cellular and secreted aspartyl-type peptidases, suggesting that this phenotypic feature did not generate a regular pattern regarding the expression of Sap.