Optimisation of a surface mount technology process using a SnAgCu lead-free alloy

The impending introduction of lead-free solder in the manufacture of electrical and electronic products has presented the electronics industry with many challenges. European manufacturers must transfer from a tin-lead process to a lead-free process by July 2006 as a result of the publication of two directives from the European Parliament. Tin-lead solders have been used for mechanical and electrical connections on printed circuit boards for over fifty years and considerable process knowledge has been accumulated. Extensive literature reviews were conducted on the topic and as a result it was found there are many implications to be considered with the introduction of lead-free solder. One particular question that requires answering is; can lead-free solder be used in existing manufacturing processes? The purpose of this research is to conduct a comparative study of a tin-lead solder and a lead-free solder in two key surface mount technology (SMT) processes. The two SMT processes in question were the stencil printing process and the reflow soldering process. Unreplicated fractional factorial experimental designs were used to carry out the studies. The quality of paste deposition in terms of height and volume were the characteristics of interest in the stencil printing process. The quality of solder joints produced in the reflow soldering experiment was assessed using x-ray and cross sectional analysis. This provided qualitative data that was then uniquely scored and weighted using a method developed during the research. Nested experimental design techniques were then used to analyse the resulting quantitative data. Predictive models were developed that allowed for the optimisation of both processes. Results from both experiments show that solder joints of comparable quality to those produced using tin-lead solder can be produced using lead-free solder in current SMT processes.

Crescilin (suplemento de penicilina G procaína cristalina) na alimentação de leitões

The A. studied the use of "crescilin", a residual byproduct of penicillin manufacture. It has been recommended the proportion of 1 per cent and proclaimed to supply 400,000 U. O. per kg. The results obtained permited to conclude that 1 per cent of crescilin did not increase the growth of pigs.

Sugar and sugar making / by James B. McNair, Asst. Curator of Economic Botany.

no.13(1927)

Disseny, fabricació i caracterització d'amplificadors de baix soroll per instrumentació

Aquest projecte consisteix en l’estudi, disseny i fabricació d’un amplificador de baix soroll per instrumentació, el qual es basarà en uns requisits de guany, ample de banda i de mides a complir. Un vegada vistos els requisits i fet un estudi previ de la situació, el primer pas serà realitzar el disseny principal de l’amplificador, el qual s’anirà millorant a mesura que avanci el projecte. Un cop dissenyat i avaluat el circuit amb el software ADS, el següent pas serà intentar fer un model de layout, el qual serà fabricat i analitzat, per tal d'intentar aconseguir el resultat esperat de les especificacions. Finalment, es detallaran les conclusions a les quals s’ha arribat desprès d’haver realitzat aquest projecte.

Les traces de pneumatiques en sciences forensiques : de l'analyse chimique à l'évaluation de la force probante

This work is focused on the development of a methodology for the use of chemical characteristic of tire traces to help answer the following question: "Is the offending tire at the origin of the trace found on the crime scene?". This methodology goes from the trace sampling on the road to statistical analysis of its chemical characteristics. Knowledge about the composition and manufacture of tread tires as well as a review of instrumental techniques used for the analysis of polymeric materials were studied to select, as an ansi vi cal technique for this research, pyrolysis coupled to a gas Chromatograph with a mass spectrometry detector (Py-GC/MS). An analytical method was developed and optimized to obtain the lowest variability between replicates of the same sample. Within-variability of the tread was evaluated regarding width and circumference with several samples taken from twelve tires of different brands and/or models. The variability within each of the treads (within-variability) and between the treads (between-variability) could be quantified. Different statistical methods have shown that within-variability is lower than between-variability, which helped differentiate these tires. Ten tire traces were produced with tires of different brands and/or models by braking tests. These traces have been adequately sampled using sheets of gelatine. Particles of each trace were analysed using the same methodology as for the tires at their origin. The general chemical profile of a trace or of a tire has been characterized by eighty-six compounds. Based on a statistical comparison of the chemical profiles obtained, it has been shown that a tire trace is not differentiable from the tire at its origin but is generally differentiable from tires that are not at its origin. Thereafter, a sample containing sixty tires was analysed to assess the discrimination potential of the developed methodology. The statistical results showed that most of the tires of different brands and models are differentiable. However, tires of the same brand and model with identical characteristics, such as country of manufacture, size and DOT number, are not differentiable. A model, based on a likelihood ratio approach, was chosen to evaluate the results of the comparisons between the chemical profiles of the traces and tires. The methodology developed was finally blindly tested using three simulated scenarios. Each scenario involved a trace of an unknown tire as well as two tires possibly at its origin. The correct results for the three scenarios were used to validate the developed methodology. The different steps of this work were useful to collect the required information to test and validate the underlying assumption that it is possible to help determine if an offending tire » or is not at the origin of a trace, by means of a statistical comparison of their chemical profile. This aid was formalized by a measure of the probative value of the evidence, which is represented by the chemical profile of the trace of the tire. - Ce travail s'est proposé de développer une méthodologie pour l'exploitation des caractéristiques chimiques des traces de pneumatiques dans le but d'aider à répondre à la question suivante : «Est-ce que le pneumatique incriminé est ou n'est pas à l'origine de la trace relevée sur les lieux ? ». Cette méthodologie s'est intéressée du prélèvement de la trace de pneumatique sur la chaussée à l'exploitation statistique de ses caractéristiques chimiques. L'acquisition de connaissances sur la composition et la fabrication de la bande de roulement des pneumatiques ainsi que la revue de techniques instrumentales utilisées pour l'analyse de matériaux polymériques ont permis de choisir, comme technique analytique pour la présente recherche, la pyrolyse couplée à un chromatographe en phase gazeuse avec un détecteur de spectrométrie de masse (Py-GC/MS). Une méthode analytique a été développée et optimisée afin d'obtenir la plus faible variabilité entre les réplicas d'un même échantillon. L'évaluation de l'intravariabilité de la bande de roulement a été entreprise dans sa largeur et sa circonférence à l'aide de plusieurs prélèvements effectués sur douze pneumatiques de marques et/ou modèles différents. La variabilité au sein de chacune des bandes de roulement (intravariabilité) ainsi qu'entre les bandes de roulement considérées (intervariabilité) a pu être quantifiée. Les différentes méthodes statistiques appliquées ont montré que l'intravariabilité est plus faible que l'intervariabilité, ce qui a permis de différencier ces pneumatiques. Dix traces de pneumatiques ont été produites à l'aide de pneumatiques de marques et/ou modèles différents en effectuant des tests de freinage. Ces traces ont pu être adéquatement prélevées à l'aide de feuilles de gélatine. Des particules de chaque trace ont été analysées selon la même méthodologie que pour les pneumatiques à leur origine. Le profil chimique général d'une trace de pneumatique ou d'un pneumatique a été caractérisé à l'aide de huitante-six composés. Sur la base de la comparaison statistique des profils chimiques obtenus, il a pu être montré qu'une trace de pneumatique n'est pas différenciable du pneumatique à son origine mais est, généralement, différenciable des pneumatiques qui ne sont pas à son origine. Par la suite, un échantillonnage comprenant soixante pneumatiques a été analysé afin d'évaluer le potentiel de discrimination de la méthodologie développée. Les méthodes statistiques appliquées ont mis en évidence que des pneumatiques de marques et modèles différents sont, majoritairement, différenciables entre eux. La méthodologie développée présente ainsi un bon potentiel de discrimination. Toutefois, des pneumatiques de la même marque et du même modèle qui présentent des caractéristiques PTD (i.e. pays de fabrication, taille et numéro DOT) identiques ne sont pas différenciables. Un modèle d'évaluation, basé sur une approche dite du likelihood ratio, a été adopté pour apporter une signification au résultat des comparaisons entre les profils chimiques des traces et des pneumatiques. La méthodologie mise en place a finalement été testée à l'aveugle à l'aide de la simulation de trois scénarios. Chaque scénario impliquait une trace de pneumatique inconnue et deux pneumatiques suspectés d'être à l'origine de cette trace. Les résultats corrects obtenus pour les trois scénarios ont permis de valider la méthodologie développée. Les différentes étapes de ce travail ont permis d'acquérir les informations nécessaires au test et à la validation de l'hypothèse fondamentale selon laquelle il est possible d'aider à déterminer si un pneumatique incriminé est ou n'est pas à l'origine d'une trace, par le biais d'une comparaison statistique de leur profil chimique. Cette aide a été formalisée par une mesure de la force probante de l'indice, qui est représenté par le profil chimique de la trace de pneumatique.

Marbles and carbonate rocks from central Morocco: a petrographic, mineralogical and geochemical study

Petrographic, mineralogical, and stable isotopes (delta C-13, delta O-18 values) compositions were used to characterise marbles and sedimentary carbonate rocks from central Morocco, which are considered to be a likely source of ornamental and building material from Roman time to the present day. This new data set was used in the frame of an archaeometric provenance study on Roman artefacts from the town of Thamusida (Kenitra, north Morocco), to assess the potential employment of these rocks for the manufacture of the archaeological materials. A representative set of samples from marbles and other carbonate rocks (limestone, dolostone) were collected in several quarries and outcrops in the Moroccan Meseta, in a region extending from the Meknes-Khenifra alignment to the Atlantic Ocean. All the samples were studied using a petrographic, mineralogical and geochemical methods. The petrographic and minerological investigations (optical microscopy, electron microscopy, X-ray diffraction) allowed to group the carbonate rocks in limestones, foliated limestone, diagenetic breccias and dolostone. The limestones could be further grouped as mudstones, wackestones-packstones, crinoid grainstones, oolitic grainstone and floatstones. Textural differences allowed to define marbles varieties. The stable carbon and oxygen isotope composition proved to be quite useful in the discrimination of marble sources, with apparently less discriminatory potential for carbonate rocks.

Native-like, long synthetic peptides as components of sub-unit vaccines: practical and theoretical considerations for their use in humans.

Vaccines have been used as a successful tool in medicine by way of controlling many major diseases. In spite of this, vaccines today represent only a handful of all infectious diseases. Therefore, there is a pressing demand for improvements of existing vaccines with particular reference to higher efficacy and undisputed safety profiles. To this effect, as an alternative to available vaccine technologies, there has been a drive to develop vaccine candidate polypeptides by chemical synthesis. In our laboratory, we have recently developed a technology to manufacture long synthetic peptides of up to 130 residues, which are correctly folded and biologically active. This paper discusses the advantages of the molecularly defined, long synthetic peptide approach in the context of vaccine design, development and use in human vaccination.

L'energia solar fotovoltaica

Treball de recerca realitzat per alumnes d'ensenyament secundari i guardonat amb un Premi CIRIT per fomentar l'esperit cientí­fic del Jovent l'any 2009. Després d'una breu introducció sobre l'energia solar, l'estudi analitza quin és el procés de fabricació que se segueix per fer les plaques solars fotovoltaiques policristal·lines i monocristal·lines i quin és el seu funcionament. És a dir, com és possible obtenir energia elèctrica gràcies a la llum del Sol. També es descriuen les instal·lacions autònomes i les connectades a la xarxa, així com els elements que les integren. S'inclou, a més, un punt explicant quins són els factors que condicionen l'obtenció d'energia i els avenços més recents en aquest camp de la tecnologia. Per finalitzar la part teòrica, s'analitza una instal·lació fotovoltaica situada a Cervera i la seva producció. Pel que fa al treball de camp, es va construir un seguidor solar.

Perspective for the reproduction of antimalarial drugs in Brazil

The appears to be no chemical manufacture of antimalarial drugs is Brazil. Technology at laboratory process level has been developed for chloroquine, mefloquine, pyrimethamine and cycloquanil, but not perfected nor scaled-up, largely for economic reasons and market uncertainty. Development of primaquine has been contracted but it will run into the same difficulty. Manufacturing capacity for sulfadoxine was registred in the SDI by Roche. A project to produce artemisinine and its derivates is under way at UNICAMP-CPQBA but is hampered by low content in the plant. Proguanil could be produced easily, but apparently no attempt has been made to do so. Quinine is imported on a large scale mostly for softdrink production. Since malarial treatment falls largely within responsability of the Government health authorities, manufacture of drugs in Brazil will depend on an assured medium-term purchase order made to a potential local manufacturer, since competition in the world market is scarcelyviable at the present moment.

The Visual Dysphagia Questionnaire: Piloting a New Tool for Assessing Food Consistency-Dependent Dysphagia in Eosinophilic Esophagitis

Background and Aims: The international EEsAI study group is currently developing the first activity index specific for Eosinophilic Esophagitis (EoE). None of the existing dysphagia questionnaires takes into account the consistency of the ingested food that considerably impacts the symptom presentation. Goal: To develop an EoE-specific questionnaire assessing dysphagia associated with different food consistencies. Methods: Based on patient chart reviews, an expert panel (EEsAI study group) identified internationally standardized food prototypes typically associated with EoE-related dysphagia. Food consistencies were correlated with EoE-related dysphagia, also considering potential food avoidance. This Visual Dysphagia Questionnaire (VDQ) was then tested, as a pilot, in 10 EoE patients. Results: The following 9 food consistency prototypes were identified: water, soft foods (pudding, jelly), grits, toast bread, French fries, dry rice, ground meat, raw fibrous foods (eg. apple, carrot), solid meat. Dysphagia was ranked on a 5-point Likert scale (0=no difficulties, 5=very severe difficulties, food will not pass). Severity of dysphagia in the 10 EoE patients was related to the eosinophil load and presence of esophageal strictures. Conclusions: The VDQ will be the first EoE-specific tool for assessing dysphagia related to internationally defined food consistencies. It performed well in a pilot study and will now be further evaluated in a cohort study including 100 adult and 100 pediatric EoE patients.

Schistosomiasis vaccine development: approaches and prospects

Mounting evidence for acquired immunity to schistosomiasis in humans supports the case for immunological intervention. On the other hand, rapid reinfection poses a threat to younger age groups due to the slow maturation of natural resistance. However, rational approaches, based on advances in immunology and molecular biology, have substantially increased the odds of producing an effective vaccine. Since the parasite cannot replicate in the human host and serious morbidity generally occurs only after a relatively long period of heavy worm burden, complete protection against infection is not essential. The chances of success would increase if more than one of the various host/parasite interphases were targeted, for example reducing morbidity through decreased worm loads as well as through suppression of egg production. Several promising schistosome antigens have now reached an advanced phase of development and are currently undergoing independent confirmatory testing according to a standardized protocol. A few molecules are being contemplated for scaled-up production but, so far, only one has reached the stage of industrial manufacture and safety testing. Since schistosomiasis cannot realistically be controlled by a single approach, vaccination is envisaged to be implemented in conjunction with other means of control, notably chemotherapy.

Respuesta no lineal y criterios de diseño de puentes arco espaciales

El desarrollo más reciente de los puentes arco ha llevado a una nueva tipología: los “puentes arco espaciales”. Se entiende por puente arco espacial todo puente arco en el que, por su configuración geométrica y estructural, las cargas gravitatorias generan esfuerzos no contenidos en el plano del arco. Por un lado, aparecen para satisfacer las necesidades funcionales cuando estructuras en arco resultan las más adecuadas para sostener tableros curvos y evitar así apoyos intermedios. Desde un punto de vista estético, surgen como demanda de los nuevos puentes en entornos urbanos, buscando, no sólo una forma cuidada, sino persiguiendo convertirse en emblemas de la ciudad a partir de la originalidad y la innovación. Su proyecto y construcción es posible gracias a las grandes posibilidades que ofrecen los nuevos métodos de cálculo y dibujo por ordenador, en los que, a través del incremento de memoria y rapidez, cada vez se emplean programas más completos y nuevas modelizaciones, más cercanas a la realidad. No menos importante es el desarrollo de los medios auxiliares de construcción y de las herramientas de CAD/CAM, que convierte en construibles por control numérico formas de manufactura impensables. Ello trasciende en infinitas posibilidades de diseño y estructura. Sin embargo, el diseño y construcción de estas nuevas tipologías no ha estado acompañado por el avance en el estado del conocimiento fundamentado en la investigación, ya que se han desarrollado pocos estudios que explican parcialmente la respuesta estructural de estos puentes. Existe, por lo tanto, la necesidad de profundizar en el estado del conocimiento y clarificar su respuesta estructural, así como de plantear, finalmente, criterios de diseño que sirvan de apoyo en las fases de concepción y de proyecto a estas nuevas tipologías.

Especificación de procesos en industria química para la implantación de la producción en SAP R/3

En este proyecto se ha realizado un estudio en el campo del modelado de los procesos de negocio y sus notaciones. En concreto, se han analizado las notaciones BPMN y UML que se han usado para especificar los procesos en la gestión de la fabricación de una empresa química. Tras estas especificaciones, se ha realizado la comparación de estas dos notaciones con el fin de escoger la mejor de ellas para especificar procesos de negocio. A partir de la especificación de procesos, se ha descrito la implantación del módulo de fabricación de SAP en la misma empresa.

Desfasador de dos estats

El projecte es basa en el disseny i la fabricació d’un circuit desfasador, amb una entrada i una sortida, que commuta entre dos estats, un estat amb desfasament de 180º i l’altre sense desfasament. El circuit es dissenya amb microstrip,per una fc=5GHz. S’intenten obtenir les millors característiques per aquest disseny, és a dir, bon ample de banda i pèrdues per inserció baixes, acompanyat d’una bona resposta en les relacions de magnitud i fase. Es segueixen diferents etapes de disseny, on es comença per un model simple i s’avança en complexitat, afegint els nous components que acabaran conformant el circuit final. Després del disseny es passa a la fabricació del circuit, per veure el seu funcionament real. La memòria recull i ordena la informació obtinguda a través d’aquest procés, intentant mostrar-la de manera clara, per tal de seguir el procés de disseny realitzat, i així poder interpretar els resultats obtinguts. L’objectiu final és veure com es comporta el circuit dissenyat i definir les pautes a seguir per millorar-lo en un futur.