Popular participation in labour law: The new labour dispute resolution tribunal

The Labour Tribunal Law (No. 45 of 2004) ushered in a new court-annexed dispute resolution system for industrial relations disputes in Japan (outlined generally in Sugeno, 2004). Similar to the lay judge system for criminal trials (Johnson and Shinomiya, Chapter 2), the new tribunal adopts an adjudicative model that blends professional and lay expertise with decisions heard by a tripartite panel comprising a professional judge and two lay judges recommended by management and labour unions respectively. The new tribunal system came into operation on 1 April 2006.

Particle emissions from biodiesels with different physical properties and chemical composition

Biodiesels produced from different feedstocks usually have wide variations in their fatty acid methyl ester (FAME) so that their physical properties and chemical composition are also different. The aim of this study is to investigate the effect of the physical properties and chemical composition of biodiesels on engine exhaust particle emissions. Alongside with neat diesel, four biodiesels with variations in carbon chain length and degree of unsaturation have been used at three blending ratios (B100, B50, B20) in a common rail engine. It is found that particle emission increased with the increase of carbon chain length. However, for similar carbon chain length, particle emissions from biodiesel having relatively high average unsaturation are found to be slightly less than that of low average unsaturation. Particle size is also found to be dependent on fuel type. The fuel or fuel mix responsible for higher particle mass (PM) and particle number (PN) emissions is also found responsible for larger particle median size. Particle emissions reduced consistently with fuel oxygen content regardless of the proportion of biodiesel in the blends, whereas it increased with fuel viscosity and surface tension only for higher diesel–biodiesel blend percentages (B100, B50). However, since fuel oxygen content increases with the decreasing carbon chain length, it is not clear which of these factors drives the lower particle emission. Overall, it is evident from the results presented here that chemical composition of biodiesel is more important than its physical properties in controlling exhaust particle emissions.

Characterisation and processing of amorphous binary mixtures with low glass transition temperature

The number of drug substances in formulation development in the pharmaceutical industry is increasing. Some of these are amorphous drugs and have glass transition below ambient temperature, and thus they are usually difficult to formulate and handle. One reason for this is the reduced viscosity, related to the stickiness of the drug, that makes them complicated to handle in unit operations. Thus, the aim in this thesis was to develop a new processing method for a sticky amorphous model material. Furthermore, model materials were characterised before and after formulation, using several characterisation methods, to understand more precisely the prerequisites for physical stability of amorphous state against crystallisation. The model materials used were monoclinic paracetamol and citric acid anhydrate. Amorphous materials were prepared by melt quenching or by ethanol evaporation methods. The melt blends were found to have slightly higher viscosity than the ethanol evaporated materials. However, melt produced materials crystallised more easily upon consecutive shearing than ethanol evaporated materials. The only material that did not crystallise during shearing was a 50/50 (w/w, %) blend regardless of the preparation method and it was physically stable at least two years in dry conditions. Shearing at varying temperatures was established to measure the physical stability of amorphous materials in processing and storage conditions. The actual physical stability of the blends was better than the pure amorphous materials at ambient temperature. Molecular mobility was not related to the physical stability of the amorphous blends, observed as crystallisation. Molecular mobility of the 50/50 blend derived from a spectral linewidth as a function of temperature using solid state NMR correlated better with the molecular mobility derived from a rheometer than that of differential scanning calorimetry data. Based on the results obtained, the effect of molecular interactions, thermodynamic driving force and miscibility of the blends are discussed as the key factors to stabilise the blends. The stickiness was found to be affected glass transition and viscosity. Ultrasound extrusion and cutting were successfully tested to increase the processability of sticky material. Furthermore, it was found to be possible to process the physically stable 50/50 blend in a supercooled liquid state instead of a glassy state. The method was not found to accelerate the crystallisation. This may open up new possibilities to process amorphous materials that are otherwise impossible to manufacture into solid dosage forms.

Composition of chemical attractants affects trap catches of the Australian sheep blowfly, lucilia cuprina, and other blowflies

Numbers of Lucilia cuprina (Australian sheep blowfly), Chrysomya spp., and Calliphora spp. blowflies caught on sticky traps baited with various synthetic attractants or a standard liver/sodium sulfide attractant in western Queensland were recorded. Numbers of each genus collected were influenced by the composition of the chemical attractants. Attractant mixtures based on 2-mercaptoethanol, indole, butanoic/pentanoic acid, and a sodium sulfide solution gave 5- to 20-fold higher L. cuprina catches than the liver standard. These blends attracted similar numbers of Chrysomya spp. (0.85–2.7× ) and fewer Calliphora spp. (0.02–0.2× ) compared to the liver standard. These synthetic attractants were more effective and selective for L. cuprina than the standard liver/sodium sulfide attractant, and they can be packaged in controlled-release dispensers to generate constant, prolonged release of the attractant.

Arkkitehti Aarne Ervin kaupunkisuunnittelu pääkaupunkiseudulla : Suomalaisen suurkaupungin kaavoitusta toisen maailmansodan jälkeen

The Modern City Planning of Architect Aarne Ervi in the Helsinki Metropolitan Area: The Planning of the Finnish Capital after the Second World War This study focuses on the city planning of architect Aarne Ervi (1910-1977) in the Helsinki metropolitan area, which includes the cities of Helsinki, Espoo, Kauniainen and Vantaa, from the 1940s to the end of the 1960s. Ervi succeeded in several major architectural competitions in Finland, acted as the main designer of the "New Town" of Tapiola and of the suburb of Vantaanpuisto in the metropolitan area, and worked as the first director of the city planning department of Helsinki from 1965-1969. This study belongs to the field of planning history in which the art historical study of architecture blends with the history of Finnish society. I examine architect Aarne Ervi and his city planning architecture through the concept of "modern". I link the theoretical literature of modernism in architecture and the modernization of society with historical documents and empirical archival research. I examine Ervi's professional career, the teamwork characteristic of his office, and the collegial community in which Ervi serves different vocational roles as an architect. The postwar development of planning legislation and of municipal and state planning organisations provides the necessary context for urban planning. I also discuss the municipal development of Espoo and Vantaa and the regionalization process that occured in Helsinki during the decades in question. The main results of this study relate to the collective and cooperative group nature of work in architectural design, to the introduction of an alternative approach to the question of modernism in Finnish architectural discourse, and to the post-war planning history of legislative and institutional organisations in Finland. Furthermore, the study includes new historical research about the city planning department of the city of Helsinki, the planning of Tapiola and Vantaanpuisto, and the operations of the main developers of these two suburban areas: the Asuntosäästäjät Society and the Asuntosäätiö Foundation.

Le naturalisme finlandais : Une conception entropique du quotidien

Le naturalisme finlandais. Une conception entropique du quotidien. Finnish Naturalism. An Entropic Conception of Everyday Life. Nineteenth century naturalism was a strikingly international literary movement. After emerging in France in the 1870s, it spread all over Europe including young, small nations with a relatively recent literary tradition, such as Finland. This thesis surveys the role and influence of French naturalism on the Finnish literature of the 1880s and 1890s. On the basis of a selection of works of six Finnish authors (Juhani Aho, Minna Canth, Kauppis-Heikki, Teuvo Pakkala, Ina Lange and Karl August Tavaststjerna), the study establishes a view of the main features of Finnish naturalism in comparison with that of French authors, such as Zola, Maupassant and Flaubert. The study s methodological framework is genre theory: even though naturalist writers insisted on a transparent description of reality, naturalist texts are firmly rooted in general generic categories with definable relations and constants on which European novels impose variations. By means of two key concepts, entropy and everyday life , this thesis establishes the parameters of the naturalist genre. At the heart of the naturalist novel is a movement in the direction of disintegration and confusion, from order to disorder, from illusion to disillusion. This entropic vision is merged into the representation of everyday life, focusing on socially mediocre characters and discovering their miseries in all their banality and daily grayness. By using Mikhail Bakhtin s idea of literary genres as a means of understanding experience, this thesis suggests that everyday life is an ideological core of naturalist literature that determines not only its thematic but also generic distinctions: with relation to other genres, such as to Balzac s realism, naturalism appears primarily to be a banalization of everyday life. In idyllic genres, everyday life can be represented by means of sublimation, but a naturalist novel establishes a distressing, negative everyday life and thus strives to take a critical view of the modern society. Beside the central themes, the study surveys the generic blends in naturalism. The thesis analyzes how the coalition of naturalism and the melodramatic mode in the work of Minna Canth serves naturalisms ambition to discover the unconscious instincts underlying daily realities, and how the symbolic mode in the work of Juhani Aho duplicates the semantic level of the apparently insignificant, everyday naturalist details. The study compares the naturalist novel to the ideological novel (roman à these) and surveys the central dilemma of naturalism, the confrontation between the optimistic belief in social reform and the pessimistic theory of determinism. The thesis proposes that the naturalist novel s contribution to social reform lies in its shock effect. By means of representing the unpleasant truth the entropy of everyday life it aims to scandalize the reader and make him aware of the harsh realities that might apply also to him.

Development of a synthetic plant volatile-based attracticide for female noctuid moths. I. Potential sources of volatiles attractive to Helicoverpa armigera (Hubner) (Lepidoptera: Noctuidae).

This paper is the first of a series which will describe the development of a synthetic plant volatile-based attracticide for noctuid moths. It discusses potential sources of volatiles attractive to the cotton bollworm, Helicoverpa armigera (Hubner), and an approach to the combination of these volatiles in synthetic blends. We screened a number of known host and non-host (for larval development) plants for attractiveness to unmated male and female moths of this species, using a two-choice olfactometer system. Out of 38 plants tested, 33 were significantly attractive to both sexes. There was a strong correlation between attractiveness of plants to males and females. The Australian natives, Angophora floribunda and several Eucalyptus species were the most attractive plants. These plants have not been recorded either as larval or oviposition hosts of Helicoverpa spp., suggesting that attraction in the olfactometer might have been as nectar foraging rather than as oviposition sources. To identify potential compounds that might be useful in developing moth attractants, especially for females, collections of volatiles were made from plants that were attractive to moths in the olfactometer. Green leaf volatiles, floral volatiles, aromatic compounds, monoterpenes and sesquiterpenes were found. We propose an approach to developing synthetic attractants, here termed 'super-blending', in which compounds from all these classes, which are in common between attractive plants, might be combined in blends which do not mimic any particular attractive plant.

Design and characterisation of scaffolds for osteochondral regeneration

Treatment of joint diseases such as osteoarthritis is difficult and requires extensive developments for adequate solutions to emerge. Continued innovation in projects explored in this thesis may be beneficial to understanding the requirements of the joint environment. This may then lead to constructs that perform desirably from both mechanical and biological standpoints, resulting in complete, tissue-engineered osteochondral solutions. This thesis investigated specific scaffold designs for bone and osteochondral tissue engineering, as well as the formation of complex criteria on which cartilage hydrogel scaffolds may be assessed. The combination of hydrogels and ceramics were found to maintain chondrogenesis, while the concentration of photoinitiators in photocrosslinkable hydrogel systems may be optimised to maximise mechanical properties and cell viability. Finally, viscoelasticity of hydrogel blends was assessed using oscillatory motion, demonstrating the property is tailorable.

Models of care in geriatric oncology nursing

Objectives To review models of care for older adults with cancer, with a focus on the role of the oncology nurse in geriatric oncology care. International exemplars of geriatric oncology nursing care are discussed. Data source Published peer reviewed literature, web-based resources, professional society materials, and the authors' experience. Conclusion Nursing care for older patients with cancer is complex and requires integrating knowledge from multiple disciplines that blends the sciences of geriatrics, oncology, and nursing. and which recognizes the dimensions of quality of life. Implications for Nursing Practice: Oncology nurses can benefit from learning key skills of comprehensive geriatric screening and assessment to improve the care they provide for older adults with cancer.

Lexicon for the Sensory Description of Australian Native Plant Foods and Ingredients

Understanding and describing Australian flavor has proved to be a challenge for marketers of native foods because of the diversity of unique flavor signatures exhibited. Descriptive analysis techniques were applied, using a panel of 11 experienced judges, to define and articulate the sensory properties of 18 key commercial Australian native plant foods and ingredients including fruits, herbs and spices. Quantitative descriptive data were transformed into concise and accurate verbal descriptions for each of the species. The sensory language developed during the vocabulary development panel sessions was combined, categorized and ordered to develop a sensory lexicon specific for the genre. The language developed to describe the foods and ingredients was diverse and distinctly Australian including aromas such as musk, rosella, citrus and spiced tea to eucalypt, bush scrub, fresh beetroot and wheat biscuit. Practical Applications This work provides a clear, useful means of characterizing and accurately describing the flavors of Australian native plant foods and ingredients. This information has been communicated to the native food industry, chefs, formulators, food technologists and flavor experts, and provides knowledge that will assist the wider food industry to successfully develop flavor blends and produce food products from native food ingredients. It is anticipated that extension of this information to both the local and international food markets will stimulate a renewed interest in Australian native ingredients and open new market opportunities for the industry. The data developed by this research have also formed the basis of quality control targets for emerging native foods and ingredients.

Experimental investigation of the effects of oxygenated fuels on exhaust emissions in a heavy duty diesel engine

Physical and chemical properties of biofuels vary among various feedstocks and their subsequent conversions to fuels. The biofuels contain various amounts of oxygen, and this has a significant influence on exhaust emission. This oxygen content has been considered in order to investigate its effect on diesel engine exhaust emissions. The experiments have been conducted with a heavy duty diesel engine and various oxygenated fuels. It is found that the amount of oxygen in the fuel has a high level of influence on its exhaust emissions, and this provides agreement with diesel emissions results such as PN reduction. By increasing the amount of oxygen in the blend (by adding more biofuel), the particulate number (PN) is reduced and NOx increases gradually. However, the variation of PN and NOx are not similar for waste cooking biodiesel (WCBD) and butanol blend, even though their oxygen content are the same in the blends. This is due to the source of the biofuel and their internal chemistry.

Mannans as film formers and emulsion stabilizers

Mannans are abundant plant polysaccharides found in the endosperm of certain leguminous seeds (guar gum galactomannan, GG; locust bean gum galactomannan, LBG), in the tuber of the konjac plant (konjac glucomannan, KGM), and in softwoods (galactoglucomannan, GGM). This study focused on the effects of the chemical structure of mannans on their film-forming and emulsion-stabilizing properties. Special focus was on spruce GGM, which is an interesting new product from forest biorefineries. A plasticizer was needed for the formation of films from mannans other than KGM and the optimal proportion was 40% (w/w of polymers) glycerol or sorbitol. Galactomannans with lower galactose content (LBG, modified GG) produced films with higher elongation at break and tensile strength. The mechanical properties of GG-based films were improved by decreasing the degree of polymerization of the polysaccharide with moderate mannanase treatments. The improvement of mechanical properties of GGM-based films was sought by blending GGM with each of poly(vinyl alcohol) (PVOH), corn arabinoxylan (cAX), and KGM. Adding other polymers increased the elongation at break of GGM blend films. The tensile strength of films increased with increasing amounts of PVOH and KGM, but the effect of cAX was the opposite. Dynamic mechanical analysis showed two separate loss modulus peaks for blends of GGM and PVOH, but a single peak for all other films. Optical and scanning electron microscopy confirmed good miscibility of GGM with cAX and KGM. In contrast, films blended from GGM and PVOH showed phase separation. GGM and KGM were mixed with cellulose nanowhiskers (CNW) to form composite films. Addition of CNW to KGM-based films induced the formation of fiberlike structures with lengths of several millimeters. In GGM-based films, rodlike structures with lengths of tens of micrometers were formed. Interestingly, the notable differences in the film structure did not appear to be related to the mechanical and thermal properties of the films. Permeability properties of GGM-based films were compared to those of films from commercial mannans KGM, GG, and LBG. GGM-based films had the lowest water vapor permeability when compared to films from other mannans. The oxygen permeability of GGM films was of the same magnitude as that of commercial polyethylene / ethylene vinyl alcohol / polyethylene laminate film. The aroma permeability of GGM films was low. All films were transparent in the visible region, but GGM films blocked the light transmission in the ultraviolet region of the spectra. The stabilizing effect of GGM on a model beverage emulsion system was studied and compared to that of GG, LBG, KGM, and cAX. In addition, GG was enzymatically modified in order to examine the effect of the degree of polymerization and the degree of substitution of galactomannans on emulsion stability. Use of GGM increased the turbidity of emulsions both immediately after preparation and after storage of up to 14 days at room temperature. GGM emulsions had higher turbidity than the emulsions containing other mannans. Increasing the storage temperature to +45 ºC led to rapid emulsion breakdown, but a decrease in storage temperature increased emulsion stability after 14 days. A low degree of polymerization and a high degree of substitution of the modified galactomannans were associated with a decrease in emulsion turbidity.

Influence of oxygen content of the certain types of biodiesels on particulate oxidative potential

Oxidative potential (OP) is related to the organic phase, specifically to its oxygenated organic fraction (OOA). Furthermore, the oxygen content of fuel molecules has significant influence on particulate OP. Thus, this study aimed to explore the actual dependency of the OOA and ROS to the oxygen content of the fuel. In order to reach the goal, different biodiesels blends, with various ranges of oxygen content; have been employed. The compact time of flight aerosol mass spectrometer (c-ToF AMS) enabled better identification of OOA. ROS monitored by using two assays: DTT and BPEA-nit. Despite emitting lower mass, both assays agreed that oxygen content of a biodiesel is directly correlated with its OOA, and highly related to its OP. Hence, the more oxygen included in the considered biodiesels, the higher the OP of PM emissions. This highlights the importance of taking oxygen content into account while assessing emissions from new fuel types, which is relevant from a health effects standpoint.

Identification of the sex pheromone of the tree infesting Cossid Moth Coryphodema tristis (Lepidoptera: Cossidae)

The cossid moth (Coryphodema tristis) has a broad range of native tree hosts in South Africa. The moth recently moved into non-native Eucalyptus plantations in South Africa, on which it now causes significant damage. Here we investigate the chemicals involved in pheromone communication between the sexes of this moth in order to better understand its ecology, and with a view to potentially develop management tools for it. In particular, we characterize female gland extracts and headspace samples through coupled gas chromatography electro-antennographic detection (GC-EAD) and two dimensional gas chromatography mass spectrometry (GCxGC-MS). Tentative identities of the potential pheromone compounds were confirmed by comparing both retention time and mass spectra with authentic standards. Two electrophysiologically active pheromone compounds, tetradecyl acetate (14:OAc) and Z9-tetradecenyl acetate (Z9-14:OAc) were identified from pheromone gland extracts, and an additional compound (Z9-14:OH) from headspace samples. We further determined dose response curves for the identified compounds and six other structurally similar compounds that are common to the order Cossidae. Male antennae showed superior sensitivity toward Z9-14:OAc, Z7-tetradecenyl acetate (Z7-14:OAc), E9-tetradecenyl acetate (E9-14:OAc), Z9-tetradecenol (Z9-14:OH) and Z9-tetradecenal (Z9-14:Ald) when compared to female antennae. While we could show electrophysiological responses to single pheromone compounds, behavioral attraction of males was dependent on the synergistic effect of at least two of these compounds. Signal specificity is shown to be gained through pheromone blends. A field trial showed that a significant number of males were caught only in traps baited with a combination of Z9-14:OAc (circa 95 of the ratio) and Z9-14:OH. Addition of 14:OAc to this mixture also improved the number of males caught, although not significantly. This study represents a major step towards developing a useful attractant to be used in management tools for C. tristis and contributes to the understanding of chemical communication and biology of this group of insects.

Influence of biodiesel fuel composition on the morphology and microstructure of particles emitted from diesel engines

This study investigates the morphology, microstructure and surface composition of Diesel engine exhaust particles. The state of agglomeration, the primary particle size and the fractal dimension of exhaust particles from petroleum Diesel (petrodiesel) and biodiesel blends from microalgae, cotton seed and waste cooking oil were investigated by means of high resolution transmission electron microscopy. With primary particle diameters between 12-19 nm, biodiesel blend primary particles are found to be smaller than petrodiesel ones (21±2 nm). Also it was found that soot agglomerates from biodiesels are more compact and spherical, as their fractal dimensions are higher, e.g. 2.2±0.1 for 50% algae biodiesel compared to 1.7±0.1 for petrodiesel. In addition, analysis of the chemical composition by means of x-ray photoelectron spectroscopy revealed an up to a factor of two increased oxygen content on the primary particle surface for biodiesel. The length, curvature and distance of graphene layers were measured showing a greater structural disorder for biodiesel with shorter fringes of higher tortuosity. This change in carbon chemistry may reflect the higher oxygen content of biofuels. Overall, it seems that the oxygen content in the fuels is the underlying reason for the observed morphological change in the resulting soot particles.