Constant wall heat flux boundary conditions in micro-channels filled with porous material with internal heat generation under local thermal non-equilibrium conditions

Forced convection heat transfer in a micro-channel filled with a porous material saturated with rarefied gas with internal heat generation is studied analytically in this work. The study is performed by analysing the boundary conditions for constant wall heat flux under local thermal non-equilibrium (LTNE) conditions. Invoking the velocity slip and temperature jump, the thermal behaviour of the porous-fluid system is studied by considering thermally and hydrodynamically fully-developed conditions. The flow inside the porous material is modelled by the Darcy–Brinkman equation. Exact solutions are obtained for both the fluid and solid temperature distributions for two primary approaches models A and B using constant wall heat flux boundary conditions. The temperature distributions and Nusselt numbers for models A and B are compared, and the limiting cases resulting in the convergence or divergence of the two models are also discussed. The effects of pertinent parameters such as fluid to solid effective thermal conductivity ratio, Biot number, Darcy number, velocity slip and temperature jump coefficients, and fluid and solid internal heat generations are also discussed. The results indicate that the Nusselt number decreases with the increase of thermal conductivity ratio for both models. This contrasts results from previous studies which for model A reported that the Nusselt number increases with the increase of thermal conductivity ratio. The Biot number and thermal conductivity ratio are found to have substantial effects on the role of temperature jump coefficient in controlling the Nusselt number for models A and B. The Nusselt numbers calculated using model A change drastically with the variation of solid internal heat generation. In contrast, the Nusselt numbers obtained for model B show a weak dependency on the variation of internal heat generation. The velocity slip coefficient has no noticeable effect on the Nusselt numbers for both models. The difference between the Nusselt numbers calculated using the two models decreases with an increase of the temperature jump coefficient.

Effect of the processing conditions on the microstructure and properties of rotational molded polyamide 11

Rotomolded containers for solvents and hydrocarbons require the use of high-permeability resins such as polyamide (PA). The published studies with this material are very scarce. In this work, a commercial grade of PA11 was rotational-molded using different processing temperatures and characterized with a range of techniques. The study aims at investigating the influence of the processing conditions on the microstructure and properties of molded parts. The results showed that the spherulitic morphology and the mechanical properties are affected by the processing temperature, the optimum processing range being between 220°C and 240°C. Overheating causes a decrease of the impact strength and a severe increase in the formation of pinholes at the outer surface due to polymer degradation and formation of volatile products. The thermo-oxidation reactions occurring at the inner surface of the samples result in the formation of products that absorb in the UV and visible light regions and cause the microhardness and the melt viscosity of the material to increase. The extent and severity of the degradation at the inner surface may be easily assessed by fluorescence microscopy. © 2008 Wiley Periodicals, Inc.

Living conditions in old age: Coexisting disadvantages across life domains

The aim of this thesis was to analyse coexisting disadvantages in the older Swedish population. Coexisting disadvantages are those that occur simultaneously in various life domains. A person who simultaneously experiences several disadvantages may be particularly vulnerable and less well-equipped to manage daily life and may also need support from several different welfare service providers. Concerted actions may be needed for older people who experience not only physical health problems and functional limitations, but also other problems. Research that encompasses a wide range of living conditions provides a basis for setting political priorities and making political decisions. The studies in this thesis used data from two Swedish nationally representative surveys: the Level of Living Survey, which includes people aged 18 through 75, and the Swedish Panel Study of Living Conditions of the Oldest Old, which includes people aged 77 and older. Study I showed that the probability of experiencing coexisting disadvantages was higher in people 77 and older than in those aged 18 through 76. These age differences were partly driven by a high prevalence of physical health problems in older people. In all age groups, coexisting disadvantages were more common in women than men. The longitudinal analyses in Study II indicated that coexisting disadvantages in old age persist in some people but are temporary in others. Moreover, the results suggested a pattern of accumulating disadvantages: reporting one disadvantage in young old age (in particular, psychological health problems) increased the probability of reporting coexisting disadvantages in late old age.   Study III showed that physical health problems were a central component of coexisting disadvantages. The results also showed that being older; female; previously employed as a manual labourer; and divorced/separated, widowed or never married were associated with an increased probability of experiencing coexisting disadvantages. However, the experience of coexisting disadvantages differed: the groups associated with coexisting disadvantages tended to report different combinations of disadvantage. Study IV showed that the prevalence of coexisting disadvantages in those 77 and older increased slightly between 1992 and 2011. Physical health problems became more common over time, whereas limited ability to manage daily activities (ADL limitations), limited financial resources and limited political resources became less common. Associations between different disadvantages were found in all survey years, but certain associations changed over time. The results suggest that in general, the composition of coexisting disadvantages in the older population may have altered over time. In sum, results showed that coexisting disadvantages were associated with specific demographic and socio-economic groups. Physical health problems and psychological health problems were of particular importance to the accumulation and coexistence of disadvantages in old age.

Investigation of the Effect of Speed on the Dynamic Impact Factor for Bridges with Different Entrance Conditions, 2016

The dynamic interaction of vehicles and bridges results in live loads being induced into bridges that are greater than the vehicle’s static weight. To limit this dynamic effect, the Iowa Department of Transportation (DOT) currently requires that permitted trucks slow to five miles per hour and span the roadway centerline when crossing bridges. However, this practice has other negative consequences such as the potential for crashes, impracticality for bridges with high traffic volumes, and higher fuel consumption. The main objective of this work was to provide information and guidance on the allowable speeds for permitted vehicles and loads on bridges .A field test program was implemented on five bridges (i.e., two steel girder bridges, two pre-stressed concrete girder bridges, and one concrete slab bridge) to investigate the dynamic response of bridges due to vehicle loadings. The important factors taken into account during the field tests included vehicle speed, entrance conditions, vehicle characteristics (i.e., empty dump truck, full dump truck, and semi-truck), and bridge geometric characteristics (i.e., long span and short span). Three entrance conditions were used: As-is and also Level 1 and Level 2, which simulated rough entrance conditions with a fabricated ramp placed 10 feet from the joint between the bridge end and approach slab and directly next to the joint, respectively. The researchers analyzed and utilized the field data to derive the dynamic impact factors (DIFs) for all gauges installed on each bridge under the different loading scenarios.

There is something about Mary… and Ted! : Training in mixed-sex groups makes you work harder. A study about the effort when training with the opposite sex.

In many sport associations, regardless of level, women and men rarely practice together. Previous studies indicate that work groups are generally more efficient when there is an even distribution between the sexes. Could that also be the case in sports? This study aims to investigate whether the sex composition of a training group affects the effort and performance of the participants. Eleven volunteers participated in the crossover study consisting of three different 150-meter sprint conditions; individually, single-sex group and mixed-sex group. Sprint times, heart rate and RPE were recorded during all three trials. The result of this study suggests that there might be practical benefits in regards to physical performance and effort to exercise in a training group consisting of both sexes instead of training only with the same-sex or individually. The understanding could be useful in areas such as; training optimisation for both athletes and in patient- and rehabilitation groups, increasing efficiency in work environments, in schools and sports clubs striving for both athletic success and gender equality.

Psychology and Social Work: Applied Perspectives

Successful social work practice is underpinned by knowledge, theories and research findings from a range of related disciplines, key amongst which is psychology. This timely book offers a grounded and engaging guide to psychology s vital role at the heart of contemporary social work practice. The book skilfully addresses some of the central theoretical developments in psychology from an applied perspective, and explains how these make essential contributions to the methods and theory base of social work in ways that foster critical evaluation and promote best practice. Written by two authors with extensive backgrounds in psychology and social work respectively as well as a deep understanding of the intersections of the two this book delivers a unique synthesis of perspectives and approaches, focusing on their application to the lives of individuals and families. Each chapter contains reflective points and case studies based on contemporary practice realities which are related to the Professional Capabilities Framework for Social Workers and also to the Health and Care Professions Council s Standards of Proficiency. Times have never been more challenging for social work and this book will be an invaluable source of professional support within the ever-more complex psychological worlds where social work takes place. Table of Contents 1. Introduction: The place of psychological knowledge and research in social work training and practice 2. Signposts from Developmental Psychology on Human Development over the Life Course 3. Perspectives from Clinical and Counselling Psychology on Mental Health and Illness 4. Perspectives from Social and Community Psychology: Understanding values, attitudes, diversity and community change 5. Health Psychology: Understanding health, illness, stress and addiction 6. Organizational Psychology: Understanding the individual and the organization in the social work structure 7. Forensic Psychology: Understanding criminal behaviour and working with victims of crime 8. Conclusion References Index

Objective Methods for Characterizing Physical Exposures which may contribute to Work-related Musculoskeletal Disorders in Agricultural Workers

Thesis (Ph.D.)--University of Washington, 2016-08

Moving together – conditions for intercultural development at a highly diverse Swedish school

This thesis is a case study of a primary school in a highly diverse urban neighbourhood in Sweden. Basic pre-conditions for intercultural school development are studied by examining the overall organisation of teaching, learning and opportunities for collaboration in the investigated case. The study focuses on the targeted support measures to enhance learning for students with an immigrant background: Mother tongue instruction, Swedish as a Second Language, and tutoring in the mother tongue, as well as looking at pedagogical support provided by the school library. The latter has a mission to promote learning and inclusion, where non-native speakers of Swedish are a prioritised group. Communities of practice linked to the work organisation at a meso-level are investigated, and the collaborative relationships between professional groups at the school involved in the various support measures. Teacher relationships and categorisations implied by support measures impact the learning spaces that are shaped for students and the teaching spaces within which teachers work. Collaborative opportunities and convergence of concerns in the teaching spaces combine to shape the overall space for intercultural development. The raw data for the case study consists of interviews, national policy documents and additional information on local work organisation gained through documents and observations. Four articles resulted from the case study, each focusing a specific support measure. An overarching analysis is then made of findings from these articles and the other dimensions of the investigation. The analysis describes the organisation in terms of monocultural or intercultural school cultures, pointing to significant characteristics of the landscapes of practice, with respect to their overall implications for the spaces of school development. In the discussion, findings are considered in relation to research on professional development in education, collaboration, democracy and inclusive schooling. The relative positioning of languages and cultures is given particular attention, to ascertain if the school culture is monocultural or intercultural in the sense given by Lahdenperä (2008), and to what extent it could enable intercultural development. Such positioning plays a role interms of affordances for identity, participation and engagement discussed by Wenger (1998). This case study should be understood against the wider background of recent social developments in Europe linked to globalisation and technological changes. It is argued that looking at the concrete specifics which facilitate or obstruct school development, and simultaneously reflecting on how the different forms of teaching interrelate in the overall organisation and in policy may provide a useful vantage point from which structural changes can be contemplated.The discussion underlines the importance of the physical localisation of activities, continuity in personal contacts and time available for joint pedagogical reflection, as basic conditions for effective intercultural dialogue in the organisation. Finally, the impact of policy is considered, looking at connections between levels of policy, expressed in official steering documents, and conditions for teaching and learning at the level of an individual school.

Transcriptomic comparison between two Vitis vinifera L. varieties (Trincadeira and Touriga Nacional) in abiotic stress conditions

Predicted climate changes announce an increase of extreme environmental conditions including drought and excessive heat and light in classical viticultural regions. Thus, understanding how grapevine responds to these conditions and how different genotypes can adapt, is crucial for informed decisions on accurate viticultural actions. Global transcriptome analyses are useful for this purpose as the response to these abiotic stresses involves the interplay of complex and diverse cascades of physiological, cellular and molecular events. The main goal of the present work was to evaluate the response to diverse imposed abiotic stresses at the transcriptome level and to compare the response of two grapevine varieties with contrasting physiological trends, Trincadeira (TR) and Touriga Nacional (TN).

An investigation of environmental conditions experienced during the life of high-value wood components and products

Australian forest industries have a long history of export trade of a wide range of products from woodchips (for paper manufacturing), sandalwood (essential oils, carving and incense) to high value musical instruments, flooring and outdoor furniture. For the high value group, fluctuating environmental conditions brought on by changes in temperature and relative humidity, can lead to performance problems due to consequential swelling, shrinkage and/or distortion of the wood elements. A survey determined the types of value-added products exported, including species and dimensions packaging used and export markets. Data loggers were installed with shipments to monitor temperature and relative humidity conditions. These data were converted to timber equilibrium moisture content values to provide an indication of the environment that the wood elements would be acclimatising to. The results of the initial survey indicated that primary high value wood export products included guitars, flooring, decking and outdoor furniture. The destination markets were mainly located in the northern hemisphere, particularly the United States of America, China, Hong Kong, Europe (including the United Kingdom), Japan, Korea and the Middle East. Other regions importing Australian-made wooden articles were south-east Asia, New Zealand and South Africa. Different timber species have differing rates of swelling and shrinkage, so the types of timber were also recorded during the survey. Results from this work determined that the major species were ash-type eucalypts from south-eastern Australia (commonly referred to in the market as Tasmanian oak), jarrah from Western Australia, spotted gum, hoop pine, white cypress, black butt, brush box and Sydney blue gum from Queensland and New South Wales. The environmental conditions data indicated that microclimates in shipping containers can fluctuate extensively during shipping. Conditions at the time of manufacturing were usually between 10 and 12% equilibrium moisture content, however conditions during shipping could range from 5 (very dry) to 20% (very humid). The packaging systems incorporated were reported to be efficient at protecting the wooden articles from damage during transit. The research highlighted the potential risk for wood components to ‘move’ in response to periods of drier or more humid conditions than those at the time of manufacturing, and the importance of engineering a packaging system that can account for the environmental conditions experienced in shipping containers. Examples of potential dimensional changes in wooden components were calculated based on published unit shrinkage data for key species and the climatic data returned from the logging equipment. The information highlighted the importance of good design to account for possible timber movement during shipping. A timber movement calculator was developed to allow designers to input component species, dimensions, site of manufacture and destination, to see validate their product design.

Conditions for observing IR chemiluminescence and the role of condensation in metal oxidation reactions

Infrared chemiluminescence (IRCL) studies of cw metal oxidation reactions wherein metal atoms entrained in a carrier gas were mixed with an oxidizer by means of a nozzle system are described. One goal of the work was to determine the vibrational distribution of the product molecule produced by the chemical reaction. In order to observe IRCL it was important to operate the system at the appropriate P-T point in the phase diagram of both the metal and metal salt, otherwise rapid condensation quenched any IRCL that was present. If the nucleation rate was greater 1010 3 than ~ cm-sec-I, then only "black body" radiation could be seen from the reaction. Most of the studies were on the Li/I2 system which is unique in that the phase diagrams of Li and LiI in the P-T ranges of interest are almost identical. This property permitted a relatively easy control with respect to condensation and the measurement of IRCL in the 10-28 um range for the excited LiI molecule.

In vitro expansion of U87-MG human glioblastoma cells under hypoxic conditions affects glucose metabolism and subsequent in vivo growth

International audience

Evolution of psychosocial factors at work in a French region

International audience

Determination of biodiesel quality parameters for optimization of production process conditions

According to many scientists third industrial revolution has already began and this primarily means the transition to renewable energy sources. Energy requirements are increasing rapidly due to fast industrialization and the increased number of vehicles on the roads. Massive consumption of fossil fuels leads to environmental pollution, therefore, biofuels are offered as an alternative. For example, the application of biodiesel in diesel engines instead of diesel results in the proven reduction of harmful exhaust emissions. One of the most important technologies, which has been already explored at the commercial level, is the production of a liquid biofuel applicable in compression-ignition engines (or diesel engines), from biomass rich in fats and oils. This biofuel is generically referred as biodiesel, and consists essentially of a mixture of FAME's (fatty acid methyl esters). This current work describes modern approaches of biodiesel production from vegetable oil and subsequent analysis of produced biodiesel main characteristics such as density, acidity, iodine value and FAME content.

Comportamento de Staphylococcus sob diferentes condições de crescimento: Behaviour of Staphylococcus aureus under different growth conditions

Realizou-se um trabalho experimental com o objectivo de obter informação sobre a evolução do crescimento de Staphylococcus aureus. Foram utilizadas duas estirpes de Staphylococcus aureus, uma isolada a partir de rissóis de frango e uma estirpe de referência, a ATCC n. 9213, estas estirpes foram sujeitas a 3 valores de pH diferentes (que representam os valores de pH que é possível, ou seja pH 4, 5,5 e 7, a 3 valores de concentração de NaCl, nomeadamente, 0,5%, 7% e 15%. A temperatura de desenvolvimento será de 7°C, 37°C e 50aC. Utilizaram-se dois métodos para avaliar o crescimento de Staphylococcus aureus, ao longo do tempo, nomeadamente o Método Turbidímétrico e o Método de contagem de unidades formadoras de colónias (método das diluições sucessivas). ABSTRACT: Carried out experimental work in order to obtain information on the evolution of the growth of Staphylococcus aureus. We used two strains of Staphylococcus aureus, a strain isolated from a chicken patties and one reference strain, ATCC Nº 29213, these strains were subjected to 3 different pH values (which represent the values of pH it is possible, or is pH 4, 5.5 and 7, the 3 values of NaCI concentration, namely, 0.5%, 7% and 15%. The growth temperature is 7 °C, 37°C and 50ºC. We used two methods to evaluate the growth of Staphylococcus aureus, over time, including the turbidimetric method and the method of counting colony forming units (method of successive dilutions).