An international round-robin calibration protocol for nanoindentation measurements

Nanoindentation has become a common technique for measuring the hardness and elastic-plastic properties of materials, including coatings and thin films. In recent years, different nanoindenter instruments have been commercialised and used for this purpose. Each instrument is equipped with its own analysis software for the derivation of the hardness and reduced Young's modulus from the raw data. These data are mostly analysed through the Oliver and Pharr method. In all cases, the calibration of compliance and area function is mandatory. The present work illustrates and describes a calibration procedure and an approach to raw data analysis carried out for six different nanoindentation instruments through several round-robin experiments. Three different indenters were used, Berkovich, cube corner, spherical, and three standardised reference samples were chosen, hard fused quartz, soft polycarbonate, and sapphire. It was clearly shown that the use of these common procedures consistently limited the hardness and reduced the Young's modulus data spread compared to the same measurements performed using instrument-specific procedures. The following recommendations for nanoindentation calibration must be followed: (a) use only sharp indenters, (b) set an upper cut-off value for the penetration depth below which measurements must be considered unreliable, (c) perform nanoindentation measurements with limited thermal drift, (d) ensure that the load-displacement curves are as smooth as possible, (e) perform stiffness measurements specific to each instrument/indenter couple, (f) use Fq and Sa as calibration reference samples for stiffness and area function determination, (g) use a function, rather than a single value, for the stiffness and (h) adopt a unique protocol and software for raw data analysis in order to limit the data spread related to the instruments (i.e. the level of drift or noise, defects of a given probe) and to make the H and E r data intercomparable. © 2011 Elsevier Ltd.

Three key regimes of single pulse generation per round trip of all-normal-dispersion fiber lasers mode-locked with nonlinear polarization rotation

We show experimentally and numerically new transient lasing regime between stable single-pulse generation and noise-like generation. We characterize qualitatively all three regimes of single pulse generation per round-trip of all-normal-dispersion fiber lasers mode-locked due to effect of nonlinear polarization evolution. We study spectral and temporal features of pulses produced in all three regimes as well as compressibility of such pulses. Simple criteria are proposed to identify lasing regime in experiment. © 2012 Optical Society of America.

Rhythm makes the world go round:an MEG-TMS study on the role of right TPJ theta oscillations in embodied perspective taking

While some aspects of social processing are shared between humans and other species, some aspects are not. The former seems to apply to merely tracking another's visual perspective in the world (i.e., what a conspecific can or cannot perceive), while the latter applies to perspective taking in form of mentally “embodying” another's viewpoint. Our previous behavioural research had indicated that only perspective taking, but not tracking, relies on simulating a body schema rotation into another's viewpoint. In the current study we employed Magnetoencephalography (MEG) and revealed that this mechanism of mental body schema rotation is primarily linked to theta oscillations in a wider brain network of body-schema, somatosensory and motor-related areas, with the right posterior temporo-parietal junction (pTPJ) at its core. The latter was reflected by a convergence of theta oscillatory power in right pTPJ obtained by overlapping the separately localised effects of rotation demands (angular disparity effect), cognitive embodiment (posture congruence effect), and basic body schema involvement (posture relevance effect) during perspective taking in contrast to perspective tracking. In a subsequent experiment we interfered with right pTPJ processing using dual pulse Transcranial Magnetic Stimulation (dpTMS) and observed a significant reduction of embodied processing. We conclude that right TPJ is the crucial network hub for transforming the embodied self into another's viewpoint, body and/or mind, thus, substantiating how conflicting representations between self and other may be resolved and potentially highlighting the embodied origins of high-level social cognition in general.

Getting round pegs into round holes:getting students onto the right engineering programme

Aston University offers a Foundation year in Engineering and Applied Science. The purpose of this programme is to prepare people with the necessary skills and knowledge required to enrol on an undergraduate programme in Engineering and Applied Science. It is acknowledged there are many misconceptions as to what engineering is. This is further compounded by the lack of knowledge of the different engineering disciplines both by pre-university students and careers teachers [1]. In order to ameliorate this lack of knowledge, Aston University offers a unique programme where students are given the opportunity to have a ?taste? of four Engineering Disciplines: Mechanical Engineering, Electrical Engineering, Chemical Engineering and Computer Science. Alongside these ?taster? sessions, the students study a Professional Skills module where they are expected to keep a portfolio of skills. In their portfolios they comment on their strengths and weakness in relation to six skill areas: independent enquirer, self-manager, effective participator, creative thinker, reflective learner and team worker. The portfolio gives them the opportunity to perform a self-skills audit and identify areas where they have strengths and areas which require work to improve to become a competent professional engineer. They also have talks from engineers who discuss with them their careers and the different aspects of engineering. The purpose of the ?taster? sessions, portfolio and the talks are to encourage the students to critically examine their career aspirations and choose an engineering undergraduate programme which best suits their ambitions and potential skills. The feedback from students has been very positive. The ?taster? sessions have enabled them to make an informed choice as to the undergraduate programme they would like to study. The programme has given them the technical skills and knowledge to enrol on an undergraduate programme and also the skills and knowledge to be a successful learner.

The PHAR-QA project: competency framework for pharmacy practice—first steps, the results of the European Network Delphi round 1

PHAR-QA, funded by the European Commission, is producing a framework of competences for pharmacy practice. The framework is in line with the EU directive on sectoral professions and takes into account the diversity of the pharmacy profession and the on-going changes in healthcare systems (with an increasingly important role for pharmacists), and in the pharmaceutical industry. PHAR-QA is asking academia, students and practicing pharmacists to rank competences required for practice. The results show that competences in the areas of drug interactions, need for drug treatment and provision of information and service were ranked highest whereas those in the areas of ability to design and conduct research and development and production of medicines were ranked lower. For the latter two categories, industrial pharmacists ranked them higher than did the other five groups

The impact of Round II Urban Empowerment Zones on local communities

In the United States, the federal Empowerment Zone (EZ) program aimed to create and retain business investment in poor communities and to encourage local hiring through the use of special tax credits, relaxed regulations, social service grants, and other incentives. My dissertation explores whether the Round II Urban EZs had a beneficial impact on local communities and what factors influenced the implementation and performance of the EZs, using three modes of inquiry. First, linear regression models investigate whether the federal revitalization program had a statistically significant impact on the creation of new businesses and jobs in Round II Urban EZ communities. Second, location quotient and shift-share analysis are used to reveal the industry clusters in three EZ communities that experienced positive business and job growth. Third, qualitative analysis is employed to explore factors that influenced the implementation and performance of EZs in general, and in particular, Miami-Dade County, Florida. The results show an EZ's presence failed to have a significant influence on local business and job growth. In communities that experienced a beneficial impact from EZs, there has been a pattern of decline in manufacturing companies and increase in service-driven firms. The case study suggests that institutional factors, such as governance structure, leadership, administrative capacity, and community participation have affected the effectiveness of the program's implementation and performance.

Alte aber nunmehro wider neu hervorgegebene Zeitungen : auff den neuen Hochzeit-EhrenTag des ... Herrn, H. Christian Meiers, diser käyserlichen, freyen, Reichs-Ansee und HandelStatt Bremen, fürnehmen Burger und Handelsmans mt der ... Jungffer J. Gebecca Hollen, des ... Herren H. Herman Hollen ... wollverdienten rahtsverwandten hinterlassenen eheleiblichen J. Tochter, als dieselbe den 21. Novembris, des zum neuen lauffenden 1671. Jahres ... glückwunschend gefeyret ward

Zusamen gesuchet und ... übergeben von Inbenanten [Johan Meyer ...]

Second Time Round : Fugal Memory in Ciaran Carson’s For All We Know

Peer reviewed

Year-round chemical aerosol records at Kohnen, Antarctica obtained by automatic samplings

Aimed at year-round recording of the chemical aerosol composition in central Antarctica, an unattended operating aerosol sampler was successfully deployed at the EPICA deep drilling site in Dronning Maud Land (Kohnen Station). Analyses of teflon/nylon filter packs consecutively collected over bi-weekly intervals during the February 2003 to December 2005 period allowed to evaluate seasonal concentration variations of methane sulphonate (MS), Cl-, NO3-, non-sea salt (nss-)SO4**2- and Na+, while NH4+ and mineral dust related ion results remained below detection limits. For MS and nss-SO4**2 distinct late summer maxima around 44 and 200 ng/m**3, respectively, were found, while (total) NO3- showed a broad November maximum of about 52 ng m**-3. In contrast, the highest concentrations of Na+ with peak values of up to 160 ng/m**3 were observed during the winter half year. The seasonality of these species broadly coincided with long-term observations at the coastal Neumayer Station, including surprisingly comparable NO3- levels. However, the biogenic sulphur and sea salt concentrations were lower at Kohnen by typically a factor of 2-3 and 10, respectively. The arrival of sea ice derived sea salt particles at Kohnen could not clearly detected, since even during mid-winter the nss-SO4**2- to Na+ ratio was generally too high to unambiguously identify a sulphur depleted sea salt SO4**2- fraction.