Boron transport in Eucalyptus. 2. Identification in silico of a putative boron transporter for xylem loading in eucalypt

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of Static and Cyclic Loading on Ceramic Laminate Veneers Adhered to Teeth with and Without Aged Composite Restorations

Purpose: Existing composite restorations on teeth are often remade prior to the cementation of fixed dental prostheses. The aim of this study was to evaluate the effect of static and cyclic loading on ceramic laminate veneers adhered to aged resin composite restorations.Materials and Methods: Eighty sound maxillary incisors were collected and randomly divided into four groups: group 1: control group, no restorations; group 2: two Class III restorations; group 3: two Class IV restorations; group 4: complete composite substrate. Standard composite restorations were made using a microhybrid resin composite (Anterior Shine). Restored teeth were subjected to thermocycling (6000 cycles). Window preparations were made on the labial surface of the teeth for ceramic laminate fabrication (Empress II). Teeth were conditioned using an etch-and-rinse system. Existing composite restorations representing the aged composites were silica coated (CoJet) and silanized (ESPE-Sil). Ceramic laminates were cemented using a bis-GMA-based cement (Variolink Veneer). The specimens were randomly divided into two groups and were subjected to either static (groups 1a, 2a, 3a, 4a) or cyclic loading (groups 1b, 2b, 3b, 4b). Failure type and location after loading were classified. Data were analyzed using one-way ANOVA and Tukey's test.Results: Significantly higher fracture strength was obtained in group 4 (330 +/- 81 N) compared to the controls in group 1 (179 +/- 120 N) (one-way ANOVA, p < 0.05). Group lb survived a lower mean number of cyclic loads (672,820 cycles) than teeth of groups 2b to 4b (846x10(3) to 873x10(3) cycles). Failure type evaluation after the fracture test showed predominantly adhesive failures between dentin and cement, but after cyclic loading, more cohesive fractures in the ceramic were seen.Conclusion: Ceramic laminate veneers bonded to conditioned aged composite restorations provided favorable results. Surface conditioning of existing restorations may eliminate the necessity of removing aged composite restorations.

Evaluation of interface characterization and adhesion of glass ceramics to commercially pure titanium and gold alloy after thermal- and mechanical-loading

Objectives. This study evaluated the effect of thermal- and mechanical-cycling on the shear bond strength of three low-fusing glassy matrix dental ceramics to commercial pure titanium (cpTi) when compared to conventional feldspathic ceramic fused to gold alloy.Methods. Metallic frameworks (diameter: 5 min, thickness: 4 mm) (N = 96, n = 12 per group) were cast in cpTi and gold alloy, airborne particle abraded with 150 mu m aluminum oxide. Low-fusing glassy matrix ceramics and a conventional feldspathic ceramic were fired onto the alloys (thickness: 4mm). Four experimental groups were formed; Gr1 (control group): Vita Omega 900-Au-Pd alloy; Gr2: Ticeram-cpTi; Gr3: Super Porcelain Ti-22-cpTi and G4: Vita Titankeramik-cpTi. While half of the specimens from each ceramic-metal combination were randomly tested without aging (water storage at 37 C for 24h only), the other half were first thermocycled (6000 cycles, between 5 and 55 C, dwell time: 13 s) and then mechanically loaded (20,000 cycles under SON load, immersion in distilled water at 37 C). The ceramic-alloy interfaces were loaded under shear in a universal test machine (cross-head speed: 0.5 mm/min) until failure occur-red. Failure types were noted and the interfaces of the representative fractured specimens from each group were examined with stereo microscope and scanning electron microscope (SEM). in an additional study (N = 16, n = 2 per group), energy dispersive X-ray spectroscopy (EDS) analysis was performed from ceramic-alloy interfaces. Data were analyzed using ANOVA and Tukey's test.Results. Both ceramic-metal combinations (p < 0.001) and aging conditions (p < 0,001) significantly affected the mean bond strength values. Thermal- and mechanical-cycling decreased the bond strength (MPa) results significantly for Gr3 (33.4 +/- 4.2) and Gr4 (32.1 +/- 4.8) when compared to the non-aged groups (42.9 +/- 8.9, 42.4 +/- 5.2, respectively). Gr1 was not affected significantly from aging conditions (61.3 +/- 8.4 for control, 60.7 +/- 13.7 after aging) (p > 0.05). Stereomicroscope images showed exclusively adhesive failure types at the opaque ceramic-cpTi interfacial zone with no presence of ceramic on the substrate surface but with a visible dark titanium oxide layer in Groups 2-4 except Gr1 where remnants of bonder ceramic was visible. EDS analysis from the interfacial zone for cpTi-ceramic groups showed predominantly 34.5-85.1% O(2) followed by 1.1-36.7% Aland 0-36.3% Si except for Super Porcelain Ti-22 where a small quantity of Ba (1.4-8.3%), S (0.7%) and Sn (35.3%) was found. In the Au-Pd alloy-ceramic interface, 56.4-69.9% O(2) followed by 15.6-26.2% Si, 3.9-10.9% K, 2.8-6% Na, 4.4-9.6% Al and 0-0.04% Mg was observed.Significance. After thermal-cycling for 6000 times and mechanical-cycling for 20,000 times, Triceram-cpTi combination presented the least decrease among other ceramic-alloy combinations when compared to the mean bond strength results with Au-Pd alloy-Vita Omega 900 combination. (c) 2008 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Fracture resistance of endodontically treated teeth with different heights of crown ferrule restored with prefabricated carbon fiber post and composite resin core by intermittent loading

This study evaluated the fracture resistance of endodontically treated teeth restored with prefabricated carbon fiber posts and varying quantities of coronal dentin. Sixty freshly extracted upper canines were randomly divided into groups of 10 teeth each. The specimens were exposed to 250,000 cycles in a controlled chewing simulator. All intact specimens were subjected to a static load (N) in a universal testing machine at 45 degrees to the long axis. Data were analyzed by 1-way analysis of variance and Tukey test (alpha = .05). Significant differences (P < .001) were found among the mean fracture forces of the test groups (positive control, 0 mm, 1 mm, 2 mm, 3 mm, and negative control groups: 1022.82 N, 1008.22 N, 1292.52 N, 1289.19 N, 1255.38 N, and 1582.11, respectively). These results suggested that the amount of coronal dentin did not significantly increase the fracture resistance of endodontically treated teeth restored with prefabricated carbon fiber post and composite resin core. (Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2008;106:e52-e57)

Loading of praziquantel in the crystal lattice of solid lipid nanoparticles Studies by DSC and SAXS

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Gastroesophageal reflux disease and vocal disturbances

CONTEXTO: A doença do refluxo gastroesofágico (DRGE) é uma doença crônica na qual o conteúdo gastroduodenal reflui para o esôfago. O quadro clínico da DRGE é usualmente referido como pirose e regurgitação (manifestações típicas). Manifestações atípicas (distúrbios da voz e asma) podem também ser referidas. OBJETIVO: Analisar os aspectos clínicos, endoscópicos, manométricos e pHmétricos de pacientes portadores da DRGE com distúrbios da voz. MÉTODO: Foram estudados 50 pacientes com a DRGE, sendo 25 com distúrbios da voz (grupo 1 - G1) e 25 sem estes sintomas (controles, grupo 2 - G2). Todos os pacientes foram submetidos a endoscopia, manometria e pHmetria esofágica (dois sensores). Os pacientes do G1 foram submetidos a videolaringoscopia. RESULTADOS: Achados endoscópicos: DRGE não-erosiva foi observada em 95% dos pacientes de G1 e em 88% de G2. Videolaringoscopia: congestão das pregas vocais, assimetria, nódulos e pólipos foram diagnosticados nos pacientes do G1. Manometria esofágica: pressão no esfíncter inferior do esôfago (mm Hg): 11,6 ± 5,2 em G1 e 14,0 ± 6,2 em G2 (P = 0,14); pressão no esfíncter superior do esôfago (mm Hg): 58,4 ± 15,9 em G1 e 69,5 ± 30,7 nos controles. Achados pHmétricos: índice de DeMeester: 34,0 ± 20,9 em G1 e 15,4 ± 9,4 em G2 (P<0,001); número de episódios de refluxo no sensor distal: 43,0 ± 20,4 em G1 e 26, 4 ± 17,2 em G2 (P<0,003); percentagem do tempo com pH esofágico menor que 4 unidades (sensor distal): 9,0% ± 6,4% em G1 e 3,4% ± 2,1% em G2 (P<0,001); número de episódios de refluxo no sensor proximal: 7,5 ± 10,9 em G1 e 5,3 ± 5,7 em G2 (P = 0,38); percentagem de tempo com pH esofágico menor que quatro unidades (sensor proximal): 1,2% ± 2,7% em G1 e 0,5% ± 0,7% em G2 (P = 0,210). CONCLUSÕES: Os aspectos clínicos, endoscópicos e manométricos em pacientes com a DRGE e distúrbios da voz não diferem dos pacientes sem estes sintomas. A intensidade do refluxo gastroesofágico é maior nos pacientes com distúrbios da voz. Os pacientes sem distúrbios da voz podem também apresentar episódios de refluxo gastroesofágico no sensor proximal.

Repertório vocal de Hylodes phyllodes (Amphibia, Anura, Hylodidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Programa de saúde vocal para educadores: ações e resultados

TEMA: a voz do professor tem sido foco de estudos nas últimas duas décadas devido à alta ocorrência de alterações vocais nesta classe profissional, assim, reforçou-se a necessidade dos professores participarem de ações para garantir saúde vocal. Poucos são os estudos na literatura que descrevem programas e seus resultados. PROCEDIMENTOS: Descrever um Programa de Saúde Vocal desenvolvido no período 2002 a 2005, para educadores de ensino público (infantil e fundamental) do interior do Estado de São Paulo, composto por grupos básicos de voz oferecendo conhecimento teórico prático de cuidados vocais, com triagem da qualidade da voz dos participantes; grupos avançados buscando reorganização dos processos de fonação e do uso vocal em sala de aula. RESULTADOS: em média 56% dos educadores inscritos frequentaram as ações; 62,9% das vozes apresentavam distúrbios na triagem vocal com maioria em grau discreto; no início dos grupos avançados 100% dos educadores participantes referiram mais de 3 sintomas associados ao uso vocal, e após, somente 45% deles ainda de 4 a 13 sintomas; os dados de autopercepção vocal revelaram baixos escores de impacto da voz nas atividades profissionais. CONCLUSÃO: a descrição revelou a necessidade de ajustes constantes do programa para alcançar seus objetivos. A baixa participação às ações pode estar relacionada à presença de impacto discreto da voz nas atividades profissionais, fato a ser mais bem investigado no futuro, e o benefício constatado objetivamente da participação dos educadores nos grupos avançados de voz foi a diminuição na quantidade de sintomas vocais.

Effect of mechanical loading on the I-c degradation behavior of Bi-2223 tapes

During the winding process of HTS coils the tapes of Bi-2223 are subjected to the influence of bending strain, axial strain, compressive force and torsional deformation resulting in I-c degradation. In the literature the effects of the individual strain components are separately analyzed in spite of during coil winding and energizing the strain-stress effects are combined. In this work using commercial tapes of Bi-2223 Ag/AgMg with and without stainless steel reinforcement several samples were wound on cylindrical FRP G-10 holder in which different combined strains are applied. Measurements of I - V characteristic curves are done to determine the degree of critical current degradation and the operational limits. The results are compared with the I, values of short samples and other specimens subjected to deformation generated by loading types such as tensile and bending strain.

Study of the effect of the peptide loading and solvent system in SPPS by HRMAS-NMR

The SPPS methodology has continuously been investigated as a valuable model to monitor the solvation properties of polymeric materials. In this connection, the present work applied HRMAS-NMR spectroscopy to examine the dynamics of an aggregating peptide sequence attached to a resin core with varying peptide loading (up to 80%) and solvent system. Low and high substituted BHAR were used for assembling the VQAAIDYING sequence and some of its minor fragments. The HRMAS-NMR results were in agreement with the swelling of each resin, i.e. there was an improved resolution of resonance peaks in the better solvated conditions. Moreover, the peptide loading and the attached peptide sequence also affected the spectra. Strong peptide chain aggregation was observed mainly in highly peptide loaded resins when solvated in CDCl3. Conversely, due to the better swelling of these highly loaded resins in DMSO, improved NMR spectra were acquired in this polar aprotic solvent, thus enabling the detection of relevant sequence-dependent conformational alterations. The more prominent aggregation was displayed by the VQAAIDYING segment and not by any of its intermediary fragments and these findings were also corroborated by EPR studies of these peptide-resins labelled properly with an amino acid-type spin probe. Copyright (c) 2005 European Peptide Society and John Wiley & Sons, Ltd.

Fatigue crack growth of Al 7475 T761 under constant and variable amplitude loading

Experimental programs in constant and variable amplitude loading were performed to obtain a x N curves and to study retardation in fatigue crack growth due to overloads. The main aim of this research program was to analyse the effect of overload ratio and number of overload peaks. The effect of underloads, before and after the overload blocks was also studied. The generalised equation of Paris-Erdogan type was used for modelling of obtained data on crack propagation under constant amplitude load.

Morphometric and histochemical study of the human vocal muscle

The present study was conducted on vocal muscles removed at autopsy Rom adult individuals (10 men and 8 women, aes ranging from 48 to 78 years) with no laryngeal disease. Histologic analysis was performed with hematoxylin and eosin staining, and histochemical analysis was performed by nicotinamide-adenine-dinucleotide tetrazolium reductase, succinate dehydrogenase, and acid and alkaline myofibrillar adenosine triphosphatase reactions. The histochemical reactions showed that the muscle consists of slow-twitch oxidative (SO), fast-twitch glycolytic (FG), and fast-twitch glycolytic oxidative (FOG) fibers distributed in mosaic form. The frequencies of SO, FOG, and FG fibers were 40.50%, 54.75%, and 4.75%, respectively. The higher frequency of SO and FOG oxidative fibers characterizes the muscle as having aerobic metabolism, resistance to fatigue, and fast contraction. The mean minimum diameters were 31.37 mu m for SO fibers and 36.46 mu m for FOG and FG fibers.