Knowledge-Based Task Structure Planning for an Information Gathering Agent

An effective solution to model and apply planning domain knowledge for deliberation and action in probabilistic, agent-oriented control is presented. Specifically, the addition of a task structure planning component and supporting components to an agent-oriented architecture and agent implementation is described. For agent control in risky or uncertain environments, an approach and method of goal reduction to task plan sets and schedules of action is presented. Additionally, some issues related to component-wise, situation-dependent control of a task planning agent that schedules its tasks separately from planning them are motivated and discussed.

Candidate gene identification following linkage: Search for hypertension susceptibility genes

Following up genetic linkage studies to identify the underlying susceptibility gene(s) for complex disease traits is an arduous yet biologically and clinically important task. Complex traits, such as hypertension, are considered polygenic with many genes influencing risk, each with small effects. Chromosome 2 has been consistently identified as a genomic region with genetic linkage evidence suggesting that one or more loci contribute to blood pressure levels and hypertension status. Using combined positional candidate gene methods, the Family Blood Pressure Program has concentrated efforts in investigating this region of chromosome 2 in an effort to identify underlying candidate hypertension susceptibility gene(s). Initial informatics efforts identified the boundaries of the region and the known genes within it. A total of 82 polymorphic sites in eight positional candidate genes were genotyped in a large hypothesis-generating sample consisting of 1640 African Americans, 1339 whites, and 1616 Mexican Americans. To adjust for multiple comparisons, resampling-based false discovery adjustment was applied, extending traditional resampling methods to sibship samples. Following this adjustment for multiple comparisons, SLC4A5, a sodium bicarbonate transporter, was identified as a primary candidate gene for hypertension. Polymorphisms in SLC4A5 were subsequently genotyped and analyzed for validation in two populations of African Americans (N = 461; N = 778) and two of whites (N = 550; N = 967). Again, SNPs within SLC4A5 were significantly associated with blood pressure levels and hypertension status. While not identifying a single causal DNA sequence variation that is significantly associated with blood pressure levels and hypertension status across all samples, the results further implicate SLC4A5 as a candidate hypertension susceptibility gene, validating previous evidence for one or more genes on chromosome 2 that influence hypertension related phenotypes in the population-at-large. The methodology and results reported provide a case study of one approach for following up the results of genetic linkage analyses to identify genes influencing complex traits. ^

UNDERSTANDING INTERRUPTIONS IN HEALTHCARE: DEVELOPING A MODEL

Developing a Model Interruption is a known human factor that contributes to errors and catastrophic events in healthcare as well as other high-risk industries. The landmark Institute of Medicine (IOM) report, To Err is Human, brought attention to the significance of preventable errors in medicine and suggested that interruptions could be a contributing factor. Previous studies of interruptions in healthcare did not offer a conceptual model by which to study interruptions. As a result of the serious consequences of interruptions investigated in other high-risk industries, there is a need to develop a model to describe, understand, explain, and predict interruptions and their consequences in healthcare. Therefore, the purpose of this study was to develop a model grounded in the literature and to use the model to describe and explain interruptions in healthcare. Specifically, this model would be used to describe and explain interruptions occurring in a Level One Trauma Center. A trauma center was chosen because this environment is characterized as intense, unpredictable, and interrupt-driven. The first step in developing the model began with a review of the literature which revealed that the concept interruption did not have a consistent definition in either the healthcare or non-healthcare literature. Walker and Avant’s method of concept analysis was used to clarify and define the concept. The analysis led to the identification of five defining attributes which include (1) a human experience, (2) an intrusion of a secondary, unplanned, and unexpected task, (3) discontinuity, (4) externally or internally initiated, and (5) situated within a context. However, before an interruption could commence, five conditions known as antecedents must occur. For an interruption to take place (1) an intent to interrupt is formed by the initiator, (2) a physical signal must pass a threshold test of detection by the recipient, (3) the sensory system of the recipient is stimulated to respond to the initiator, (4) an interruption task is presented to recipient, and (5) the interruption task is either accepted or rejected by v the recipient. An interruption was determined to be quantifiable by (1) the frequency of occurrence of an interruption, (2) the number of times the primary task has been suspended to perform an interrupting task, (3) the length of time the primary task has been suspended, and (4) the frequency of returning to the primary task or not returning to the primary task. As a result of the concept analysis, a definition of an interruption was derived from the literature. An interruption is defined as a break in the performance of a human activity initiated internal or external to the recipient and occurring within the context of a setting or location. This break results in the suspension of the initial task by initiating the performance of an unplanned task with the assumption that the initial task will be resumed. The definition is inclusive of all the defining attributes of an interruption. This is a standard definition that can be used by the healthcare industry. From the definition, a visual model of an interruption was developed. The model was used to describe and explain the interruptions recorded for an instrumental case study of physicians and registered nurses (RNs) working in a Level One Trauma Center. Five physicians were observed for a total of 29 hours, 31 minutes. Eight registered nurses were observed for a total of 40 hours 9 minutes. Observations were made on either the 0700–1500 or the 1500-2300 shift using the shadowing technique. Observations were recorded in the field note format. The field notes were analyzed by a hybrid method of categorizing activities and interruptions. The method was developed by using both a deductive a priori classification framework and by the inductive process utilizing line-byline coding and constant comparison as stated in Grounded Theory. The following categories were identified as relative to this study: Intended Recipient - the person to be interrupted Unintended Recipient - not the intended recipient of an interruption; i.e., receiving a phone call that was incorrectly dialed Indirect Recipient – the incidental recipient of an interruption; i.e., talking with another, thereby suspending the original activity Recipient Blocked – the intended recipient does not accept the interruption Recipient Delayed – the intended recipient postpones an interruption Self-interruption – a person, independent of another person, suspends one activity to perform another; i.e., while walking, stops abruptly and talks to another person Distraction – briefly disengaging from a task Organizational Design – the physical layout of the workspace that causes a disruption in workflow Artifacts Not Available – supplies and equipment that are not available in the workspace causing a disruption in workflow Initiator – a person who initiates an interruption Interruption by Organizational Design and Artifacts Not Available were identified as two new categories of interruption. These categories had not previously been cited in the literature. Analysis of the observations indicated that physicians were found to perform slightly fewer activities per hour when compared to RNs. This variance may be attributed to differing roles and responsibilities. Physicians were found to have more activities interrupted when compared to RNs. However, RNs experienced more interruptions per hour. Other people were determined to be the most commonly used medium through which to deliver an interruption. Additional mediums used to deliver an interruption vii included the telephone, pager, and one’s self. Both physicians and RNs were observed to resume an original interrupted activity more often than not. In most interruptions, both physicians and RNs performed only one or two interrupting activities before returning to the original interrupted activity. In conclusion the model was found to explain all interruptions observed during the study. However, the model will require an even more comprehensive study in order to establish its predictive value.

The SanaViz: Human Centered Geovisualization to facilitate visual exploration of Public Health data

These three manuscripts are presented as a PhD dissertation for the study of using GeoVis application to evaluate telehealth programs. The primary reason of this research was to understand how the GeoVis applications can be designed and developed using combined approaches of HC approach and cognitive fit theory and in terms utilized to evaluate telehealth program in Brazil. First manuscript The first manuscript in this dissertation presented a background about the use of GeoVisualization to facilitate visual exploration of public health data. The manuscript covered the existing challenges that were associated with an adoption of existing GeoVis applications. The manuscript combines the principles of Human Centered approach and Cognitive Fit Theory and a framework using a combination of these approaches is developed that lays the foundation of this research. The framework is then utilized to propose the design, development and evaluation of “the SanaViz” to evaluate telehealth data in Brazil, as a proof of concept. Second manuscript The second manuscript is a methods paper that describes the approaches that can be employed to design and develop “the SanaViz” based on the proposed framework. By defining the various elements of the HC approach and CFT, a mixed methods approach is utilized for the card sorting and sketching techniques. A representative sample of 20 study participants currently involved in the telehealth program at the NUTES telehealth center at UFPE, Recife, Brazil was enrolled. The findings of this manuscript helped us understand the needs of the diverse group of telehealth users, the tasks that they perform and helped us determine the essential features that might be necessary to be included in the proposed GeoVis application “the SanaViz”. Third manuscript The third manuscript involved mix- methods approach to compare the effectiveness and usefulness of the HC GeoVis application “the SanaViz” against a conventional GeoVis application “Instant Atlas”. The same group of 20 study participants who had earlier participated during Aim 2 was enrolled and a combination of quantitative and qualitative assessments was done. Effectiveness was gauged by the time that the participants took to complete the tasks using both the GeoVis applications, the ease with which they completed the tasks and the number of attempts that were taken to complete each task. Usefulness was assessed by System Usability Scale (SUS), a validated questionnaire tested in prior studies. In-depth interviews were conducted to gather opinions about both the GeoVis applications. This manuscript helped us in the demonstration of the usefulness and effectiveness of HC GeoVis applications to facilitate visual exploration of telehealth data, as a proof of concept. Together, these three manuscripts represent challenges of combining principles of Human Centered approach, Cognitive Fit Theory to design and develop GeoVis applications as a method to evaluate Telehealth data. To our knowledge, this is the first study to explore the usefulness and effectiveness of GeoVis to facilitate visual exploration of telehealth data. The results of the research enabled us to develop a framework for the design and development of GeoVis applications related to the areas of public health and especially telehealth. The results of our study showed that the varied users were involved with the telehealth program and the tasks that they performed. Further it enabled us to identify the components that might be essential to be included in these GeoVis applications. The results of our research answered the following questions; (a) Telehealth users vary in their level of understanding about GeoVis (b) Interaction features such as zooming, sorting, and linking and multiple views and representation features such as bar chart and choropleth maps were considered the most essential features of the GeoVis applications. (c) Comparing and sorting were two important tasks that the telehealth users would perform for exploratory data analysis. (d) A HC GeoVis prototype application is more effective and useful for exploration of telehealth data than a conventional GeoVis application. Future studies should be done to incorporate the proposed HC GeoVis framework to enable comprehensive assessment of the users and the tasks they perform to identify the features that might be necessary to be a part of the GeoVis applications. The results of this study demonstrate a novel approach to comprehensively and systematically enhance the evaluation of telehealth programs using the proposed GeoVis Framework.

Identification and evaluation of candidate genes for inherited retinal -degenerative diseases

Although more than 100 genes associated with inherited retinal disease have been mapped to chromosomal locations, less than half of these genes have been cloned. This text includes identification and evaluation of candidate genes for three autosomal dominant forms of inherited retinal degeneration: atypical vitelliform macular dystrophy (VMD1), cone-rod dystrophy (CORD), and retinitis pigmentosa (RP). ^ VMD1 is a disorder characterized by complete penetrance but extremely variable expressivity, and includes macular or peripheral retinal lesions and peripappilary abnormalitites. In 1984, linkage was reported between VMD1 and soluble glutamate-pyruvate transaminase GPT); however, placement of GPT to 8q24 on linkage maps had been debated, and VMD1 did not show linkage to microsatellite markers in that region. This study excluded linkage between the loci by cloning GPT, identifying the nucleotide substitution associated with the GPT sozymes, and by assaying VMD1 family samples with an RFLP designed to detect the substitution. In addition, linkage of VMD1 to the known dominant macular degeneration loci was excluded. ^ CORD is characterized by early onset of color-vision deficiency, and decreased visual acuity, However, this retinal degeneration progresses to no light perception, severe macular lesion, and “bone-spicule” accumulations in the peripheral retina. In this study, the disorder in a large Texan family was mapped to the CORD2 locus of 19q13, and a mutation in the retina/pineal-specific cone-rod homeobox gene (CRX) was identified as the disease cause. In addition, mutations in CRX were associated with significantly different retinal disease phenotypes, including retinitis pigmentosa and Leber congenital amaurosis. ^ Many of the mutations leading to inherited retinal disorders have been identified in genes like CRX, which are expressed predominantly in the retina and pineal gland. Therefore, a combination of database analysis and laboratory investigation was used to identify 26 novel retina/pineal-specific expressed sequence tag (EST) clusters as candidate genes for inherited retinal disorders. Eight of these genes were mapped into the candidate regions of inherited retinal degeneration loci. ^ Two of the eight clusters mapped into the retinitis pigmentosa RP13 candidate region of 17p13, and were both determined to represent a single gene that is highly expressed in photoreceptors. This gene, the Ah receptor-interacting like protein-1 (AIPL1), was cloned, characterized, and screened for mutations in RP13 patient DNA samples. ^

Reference list of 120 datasets from time series station Payerne used for exploratory search

The analysis of time-dependent data is an important problem in many application domains, and interactive visualization of time-series data can help in understanding patterns in large time series data. Many effective approaches already exist for visual analysis of univariate time series supporting tasks such as assessment of data quality, detection of outliers, or identification of periodically or frequently occurring patterns. However, much fewer approaches exist which support multivariate time series. The existence of multiple values per time stamp makes the analysis task per se harder, and existing visualization techniques often do not scale well. We introduce an approach for visual analysis of large multivariate time-dependent data, based on the idea of projecting multivariate measurements to a 2D display, visualizing the time dimension by trajectories. We use visual data aggregation metaphors based on grouping of similar data elements to scale with multivariate time series. Aggregation procedures can either be based on statistical properties of the data or on data clustering routines. Appropriately defined user controls allow to navigate and explore the data and interactively steer the parameters of the data aggregation to enhance data analysis. We present an implementation of our approach and apply it on a comprehensive data set from the field of earth bservation, demonstrating the applicability and usefulness of our approach.

Multiscale object-based classification of satellite images merging multispectral information with panchromatic textural features

Once admitted the advantages of object-based classification compared to pixel-based classification; the need of simple and affordable methods to define and characterize objects to be classified, appears. This paper presents a new methodology for the identification and characterization of objects at different scales, through the integration of spectral information provided by the multispectral image, and textural information from the corresponding panchromatic image. In this way, it has defined a set of objects that yields a simplified representation of the information contained in the two source images. These objects can be characterized by different attributes that allow discriminating between different spectral&textural patterns. This methodology facilitates information processing, from a conceptual and computational point of view. Thus the vectors of attributes defined can be used directly as training pattern input for certain classifiers, as for example artificial neural networks. Growing Cell Structures have been used to classify the merged information.

Visual Servoing for the Robotenis System: a Strategy for a 3 DOF Parallel Robot to Hit a Ping-Pong Ball

This article describes a new visual servo control and strategies that are used to carry out dynamic tasks by the Robotenis platform. This platform is basically a parallel robot that is equipped with an acquisition and processing system of visual information, its main feature is that it has a completely open architecture control, and planned in order to design, implement, test and compare control strategies and algorithms (visual and actuated joint controllers). Following sections describe a new visual control strategy specially designed to track and intercept objects in 3D space. The results are compared with a controller shown in previous woks, where the end effector of the robot keeps a constant distance from the tracked object. In this work, the controller is specially designed in order to allow changes in the tracking reference. Changes in the tracking reference can be used to grip an object that is under movement, or as in this case, hitting a hanging Ping-Pong ball. Lyapunov stability is taken into account in the controller design.

A method for Kinematic Calibration of a Parallel Robot by using one camera in hand and a spherical object

The main purpose of robot calibration is the correction of the possible errors in the robot parameters. This paper presents a method for a kinematic calibration of a parallel robot that is equipped with one camera in hand. In order to preserve the mechanical configuration of the robot, the camera is utilized to acquire incremental positions of the end effector from a spherical object that is fixed in the word reference frame. The positions of the end effector are related to incremental positions of resolvers of the motors of the robot, and a kinematic model of the robot is used to find a new group of parameters which minimizes errors in the kinematic equations. Additionally, properties of the spherical object and intrinsic camera parameters are utilized to model the projection of the object in the image and improving spatial measurements. Finally, the robotic system is designed to carry out tracking tasks and the calibration of the robot is validated by means of integrating the errors of the visual controller.

DAEDALUS at ImageCLEF Medical Retrieval 2011: Textual, Visual and Multimodal Experiments

This paper describes the participation of DAEDALUS at ImageCLEF 2011 Medical Retrieval task. We have focused on multimodal (or mixed) experiments that combine textual and visual retrieval. The main objective of our research has been to evaluate the effect on the medical retrieval process of the existence of an extended corpus that is annotated with the image type, associated to both the image itself and also to its textual description. For this purpose, an image classifier has been developed to tag each document with its class (1st level of the hierarchy: Radiology, Microscopy, Photograph, Graphic, Other) and subclass (2nd level: AN, CT, MR, etc.). For the textual-based experiments, several runs using different semantic expansion techniques have been performed. For the visual-based retrieval, different runs are defined by the corpus used in the retrieval process and the strategy for obtaining the class and/or subclass. The best results are achieved in runs that make use of the image subclass based on the classification of the sample images. Although different multimodal strategies have been submitted, none of them has shown to be able to provide results that are at least comparable to the ones achieved by the textual retrieval alone. We believe that we have been unable to find a metric for the assessment of the relevance of the results provided by the visual and textual processes

Identification of logically related heap regions

This paper introduces a novel technique for identifying logically related sections of the heap such as recursive data structures, objects that are part of the same multi-component structure, and related groups of objects stored in the same collection/array. When combined withthe lifetime properties of these structures, this information can be used to drive a range of program optimizations including pool allocation, object co-location, static deallocation, and region-based garbage collection. The technique outlined in this paper also improves the efficiency of the static analysis by providing a normal form for the abstract models (speeding the convergence of the static analysis). We focus on two techniques for grouping parts of the heap. The first is a technique for precisely identifying recursive data structures in object-oriented programs based on the types declared in the program. The second technique is a novel method for grouping objects that make up the same composite structure and that allows us to partition the objects stored in a collection/array into groups based on a similarity relation. We provide a parametric component in the similarity relation in order to support specific analysis applications (such as a numeric analysis which would need to partition the objects based on numeric properties of the fields). Using the Barnes-Hut benchmark from the JOlden suite we show how these grouping methods can be used to identify various types of logical structures allowing the application of many region-based program optimizations.

Contradictio in terminis: dialéctica de la ambigüedad en la arquitectura contemporánea

The twentieth century brought a new sensibility characterized by the discredit of cartesian rationality and the weakening of universal truths, related with aesthetic values as order, proportion and harmony. In the middle of the century, theorists such as Theodor Adorno, Rudolf Arnheim and Anton Ehrenzweig warned about the transformation developed by the artistic field. Contemporary aesthetics seemed to have a new goal: to deny the idea of art as an organized, finished and coherent structure. The order had lost its privileged position. Disorder, probability, arbitrariness, accidentality, randomness, chaos, fragmentation, indeterminacy... Gradually new terms were coined by aesthetic criticism to explain what had been happening since the beginning of the century. The first essays on the matter sought to provide new interpretative models based on, among other arguments, the phenomenology of perception, the recent discoveries of quantum mechanics, the deeper layers of the psyche or the information theories. Overall, were worthy attempts to give theoretical content to a situation as obvious as devoid of founding charter. Finally, in 1962, Umberto Eco brought together all this efforts by proposing a single theoretical frame in his book Opera Aperta. According to his point of view, all of the aesthetic production of twentieth century had a characteristic in common: its capacity to express multiplicity. For this reason, he considered that the nature of contemporary art was, above all, ambiguous. The aim of this research is to clarify the consequences of the incorporation of ambiguity in architectural theoretical discourse. We should start making an accurate analysis of this concept. However, this task is quite difficult because ambiguity does not allow itself to be clearly defined. This concept has the disadvantage that its signifier is as imprecise as its signified. In addition, the negative connotations that ambiguity still has outside the aesthetic field, stigmatizes this term and makes its use problematic. Another problem of ambiguity is that the contemporary subject is able to locate it in all situations. This means that in addition to distinguish ambiguity in contemporary productions, so does in works belonging to remote ages and styles. For that reason, it could be said that everything is ambiguous. And that’s correct, because somehow ambiguity is present in any creation of the imperfect human being. However, as Eco, Arnheim and Ehrenzweig pointed out, there are two major differences between current and past contexts. One affects the subject and the other the object. First, it’s the contemporary subject, and no other, who has acquired the ability to value and assimilate ambiguity. Secondly, ambiguity was an unexpected aesthetic result in former periods, while in contemporary object it has been codified and is deliberately present. In any case, as Eco did, we consider appropriate the use of the term ambiguity to refer to the contemporary aesthetic field. Any other term with more specific meaning would only show partial and limited aspects of a situation quite complex and difficult to diagnose. Opposed to what normally might be expected, in this case ambiguity is the term that fits better due to its particular lack of specificity. In fact, this lack of specificity is what allows to assign a dynamic condition to the idea of ambiguity that in other terms would hardly be operative. Thus, instead of trying to define the idea of ambiguity, we will analyze how it has evolved and its consequences in architectural discipline. Instead of trying to define what it is, we will examine what its presence has supposed in each moment. We will deal with ambiguity as a constant presence that has always been latent in architectural production but whose nature has been modified over time. Eco, in the mid-twentieth century, discerned between classical ambiguity and contemporary ambiguity. Currently, half a century later, the challenge is to discern whether the idea of ambiguity has remained unchanged or have suffered a new transformation. What this research will demonstrate is that it’s possible to detect a new transformation that has much to do with the cultural and aesthetic context of last decades: the transition from modernism to postmodernism. This assumption leads us to establish two different levels of contemporary ambiguity: each one related to one these periods. The first level of ambiguity is widely well-known since many years. Its main characteristics are a codified multiplicity, an interpretative freedom and an active subject who gives conclusion to an object that is incomplete or indefinite. This level of ambiguity is related to the idea of indeterminacy, concept successfully introduced into contemporary aesthetic language. The second level of ambiguity has been almost unnoticed for architectural criticism, although it has been identified and studied in other theoretical disciplines. Much of the work of Fredric Jameson and François Lyotard shows reasonable evidences that the aesthetic production of postmodernism has transcended modern ambiguity to reach a new level in which, despite of the existence of multiplicity, the interpretative freedom and the active subject have been questioned, and at last denied. In this period ambiguity seems to have reached a new level in which it’s no longer possible to obtain a conclusive and complete interpretation of the object because it has became an unreadable device. The postmodern production offers a kind of inaccessible multiplicity and its nature is deeply contradictory. This hypothetical transformation of the idea of ambiguity has an outstanding analogy with that shown in the poetic analysis made by William Empson, published in 1936 in his Seven Types of Ambiguity. Empson established different levels of ambiguity and classified them according to their poetic effect. This layout had an ascendant logic towards incoherence. In seventh level, where ambiguity is higher, he located the contradiction between irreconcilable opposites. It could be said that contradiction, once it undermines the coherence of the object, was the better way that contemporary aesthetics found to confirm the Hegelian judgment, according to which art would ultimately reject its capacity to express truth. Much of the transformation of architecture throughout last century is related to the active involvement of ambiguity in its theoretical discourse. In modern architecture ambiguity is present afterwards, in its critical review made by theoreticians like Colin Rowe, Manfredo Tafuri and Bruno Zevi. The publication of several studies about Mannerism in the forties and fifties rescued certain virtues of an historical style that had been undervalued due to its deviation from Renacentist canon. Rowe, Tafuri and Zevi, among others, pointed out the similarities between Mannerism and certain qualities of modern architecture, both devoted to break previous dogmas. The recovery of Mannerism allowed joining ambiguity and modernity for first time in the same sentence. In postmodernism, on the other hand, ambiguity is present ex-professo, developing a prominent role in the theoretical discourse of this period. The distance between its analytical identification and its operational use quickly disappeared because of structuralism, an analytical methodology with the aspiration of becoming a modus operandi. Under its influence, architecture began to be identified and studied as a language. Thus, postmodern theoretical project discerned between the components of architectural language and developed them separately. Consequently, there is not only one, but three projects related to postmodern contradiction: semantic project, syntactic project and pragmatic project. Leading these projects are those prominent architects whose work manifested an especial interest in exploring and developing the potential of the use of contradiction in architecture. Thus, Robert Venturi, Peter Eisenman and Rem Koolhaas were who established the main features through which architecture developed the dialectics of ambiguity, in its last and extreme level, as a theoretical project in each component of architectural language. Robert Venturi developed a new interpretation of architecture based on its semantic component, Peter Eisenman did the same with its syntactic component, and also did Rem Koolhaas with its pragmatic component. With this approach this research aims to establish a new reflection on the architectural transformation from modernity to postmodernity. Also, it can serve to light certain aspects still unaware that have shaped the architectural heritage of past decades, consequence of a fruitful relationship between architecture and ambiguity and its provocative consummation in a contradictio in terminis. Esta investigación centra su atención fundamentalmente sobre las repercusiones de la incorporación de la ambigüedad en forma de contradicción en el discurso arquitectónico postmoderno, a través de cada uno de sus tres proyectos teóricos. Está estructurada, por tanto, en torno a un capítulo principal titulado Dialéctica de la ambigüedad como proyecto teórico postmoderno, que se desglosa en tres, de títulos: Proyecto semántico. Robert Venturi; Proyecto sintáctico. Peter Eisenman; y Proyecto pragmático. Rem Koolhaas. El capítulo central se complementa con otros dos situados al inicio. El primero, titulado Dialéctica de la ambigüedad contemporánea. Una aproximación realiza un análisis cronológico de la evolución que ha experimentado la idea de la ambigüedad en la teoría estética del siglo XX, sin entrar aún en cuestiones arquitectónicas. El segundo, titulado Dialéctica de la ambigüedad como crítica del proyecto moderno se ocupa de examinar la paulatina incorporación de la ambigüedad en la revisión crítica de la modernidad, que sería de vital importancia para posibilitar su posterior introducción operativa en la postmodernidad. Un último capítulo, situado al final del texto, propone una serie de Proyecciones que, a tenor de lo analizado en los capítulos anteriores, tratan de establecer una relectura del contexto arquitectónico actual y su evolución posible, considerando, en todo momento, que la reflexión en torno a la ambigüedad todavía hoy permite vislumbrar nuevos horizontes discursivos. Cada doble página de la Tesis sintetiza la estructura tripartita del capítulo central y, a grandes rasgos, la principal herramienta metodológica utilizada en la investigación. De este modo, la triple vertiente semántica, sintáctica y pragmática con que se ha identificado al proyecto teórico postmoderno se reproduce aquí en una distribución específica de imágenes, notas a pie de página y cuerpo principal del texto. En la columna de la izquierda están colocadas las imágenes que acompañan al texto principal. Su distribución atiende a criterios estéticos y compositivos, cualificando, en la medida de lo posible, su condición semántica. A continuación, a su derecha, están colocadas las notas a pie de página. Su disposición es en columna y cada nota está colocada a la misma altura que su correspondiente llamada en el texto principal. Su distribución reglada, su valor como notación y su posible equiparación con una estructura profunda aluden a su condición sintáctica. Finalmente, el cuerpo principal del texto ocupa por completo la mitad derecha de cada doble página. Concebido como un relato continuo, sin apenas interrupciones, su papel como responsable de satisfacer las demandas discursivas que plantea una investigación doctoral está en correspondencia con su condición pragmática.

Distributed primary user identification from imprecise location information

We study a cognitive radio scenario in which the network of sec- ondary users wishes to identify which primary user, if any, is trans- mitting. To achieve this, the nodes will rely on some form of location information. In our previous work we proposed two fully distributed algorithms for this task, with and without a pre-detection step, using propagation parameters as the only source of location information. In a real distributed deployment, each node must estimate its own po- sition and/or propagation parameters. Hence, in this work we study the effect of uncertainty, or error in these estimates on the proposed distributed identification algorithms. We show that the pre-detection step significantly increases robustness against uncertainty in nodes' locations.

Visual Tracking, Pose Estimation, and Control for Aerial Vehicles

El principal objetivo de esta tesis es dotar a los vehículos aéreos no tripulados (UAVs, por sus siglas en inglés) de una fuente de información adicional basada en visión. Esta fuente de información proviene de cámaras ubicadas a bordo de los vehículos o en el suelo. Con ella se busca que los UAVs realicen tareas de aterrizaje o inspección guiados por visión, especialmente en aquellas situaciones en las que no haya disponibilidad de estimar la posición del vehículo con base en GPS, cuando las estimaciones de GPS no tengan la suficiente precisión requerida por las tareas a realizar, o cuando restricciones de carga de pago impidan añadir sensores a bordo de los vehículos. Esta tesis trata con tres de las principales áreas de la visión por computador: seguimiento visual y estimación visual de la pose (posición y orientación), que a su vez constituyen la base de la tercera, denominada control servo visual, que en nuestra aplicación se enfoca en el empleo de información visual para controlar los UAVs. Al respecto, esta tesis se ocupa de presentar propuestas novedosas que permitan solucionar problemas relativos al seguimiento de objetos mediante cámaras ubicadas a bordo de los UAVs, se ocupa de la estimación de la pose de los UAVs basada en información visual obtenida por cámaras ubicadas en el suelo o a bordo, y también se ocupa de la aplicación de las técnicas propuestas para solucionar diferentes problemas, como aquellos concernientes al seguimiento visual para tareas de reabastecimiento autónomo en vuelo o al aterrizaje basado en visión, entre otros. Las diversas técnicas de visión por computador presentadas en esta tesis se proponen con el fin de solucionar dificultades que suelen presentarse cuando se realizan tareas basadas en visión con UAVs, como las relativas a la obtención, en tiempo real, de estimaciones robustas, o como problemas generados por vibraciones. Los algoritmos propuestos en esta tesis han sido probados con información de imágenes reales obtenidas realizando pruebas on-line y off-line. Diversos mecanismos de evaluación han sido empleados con el propósito de analizar el desempeño de los algoritmos propuestos, entre los que se incluyen datos simulados, imágenes de vuelos reales, estimaciones precisas de posición empleando el sistema VICON y comparaciones con algoritmos del estado del arte. Los resultados obtenidos indican que los algoritmos de visión por computador propuestos tienen un desempeño que es comparable e incluso mejor al de algoritmos que se encuentran en el estado del arte. Los algoritmos propuestos permiten la obtención de estimaciones robustas en tiempo real, lo cual permite su uso en tareas de control visual. El desempeño de estos algoritmos es apropiado para las exigencias de las distintas aplicaciones examinadas: reabastecimiento autónomo en vuelo, aterrizaje y estimación del estado del UAV. Abstract The main objective of this thesis is to provide Unmanned Aerial Vehicles (UAVs) with an additional vision-based source of information extracted by cameras located either on-board or on the ground, in order to allow UAVs to develop visually guided tasks, such as landing or inspection, especially in situations where GPS information is not available, where GPS-based position estimation is not accurate enough for the task to develop, or where payload restrictions do not allow the incorporation of additional sensors on-board. This thesis covers three of the main computer vision areas: visual tracking and visual pose estimation, which are the bases the third one called visual servoing, which, in this work, focuses on using visual information to control UAVs. In this sense, the thesis focuses on presenting novel solutions for solving the tracking problem of objects when using cameras on-board UAVs, on estimating the pose of the UAVs based on the visual information collected by cameras located either on the ground or on-board, and also focuses on applying these proposed techniques for solving different problems, such as visual tracking for aerial refuelling or vision-based landing, among others. The different computer vision techniques presented in this thesis are proposed to solve some of the frequently problems found when addressing vision-based tasks in UAVs, such as obtaining robust vision-based estimations at real-time frame rates, and problems caused by vibrations, or 3D motion. All the proposed algorithms have been tested with real-image data in on-line and off-line tests. Different evaluation mechanisms have been used to analyze the performance of the proposed algorithms, such as simulated data, images from real-flight tests, publicly available datasets, manually generated ground truth data, accurate position estimations using a VICON system and a robotic cell, and comparison with state of the art algorithms. Results show that the proposed computer vision algorithms obtain performances that are comparable to, or even better than, state of the art algorithms, obtaining robust estimations at real-time frame rates. This proves that the proposed techniques are fast enough for vision-based control tasks. Therefore, the performance of the proposed vision algorithms has shown to be of a standard appropriate to the different explored applications: aerial refuelling and landing, and state estimation. It is noteworthy that they have low computational overheads for vision systems.