Novel Wide Band Printed Dipole Antenna

Design, development and experimental observations of a L: band printed dipole antenna is presented.Bandwidth enhancement is achieved by end-loading or the dipole arms. Using the present technique Impedance bandwidth van be enhanced up to 50% without degrading the efficiency of the antenna.

Analysis of Cavity Backed Printed Dipoles

The closed form expression for the radiated power of a half-wave microstrip patch is modified to calculate the impedance bandwidth of a printed dipole. Analyses of cavity backed flared and end-loaded printed dipoles are presented

Screen printed nanosized ZnO thick film

Nanosized ZnO was prepared by polyol synthesis. Fluorescence spectrum of the ZnO colloid at varying pump intensities was studied. The powder was extracted and characterized by XRD and BET. The extracted powder was screen printed on glass substrates using ethyl cellulose as binder and turpinol as solvent. Coherent back scattering studies were performed on the screen printed sample which showed evidence of weak localization. The screen printed pattern showed strong UV emission.

Investigations on the Radiation Characteristics of Planar Printed UWB Antennas With Modified Ground Planes

A major challenge in the transmission of narrow pulses is the radiation characteristics of the antenna. Designing the front ends for UWB systems pose challenges compared to their narrow and wide band counterparts because in addition to having electrically small size, high efficiency and band width, the antenna has to have excellent transient response. The present work deals with the design of four novel antenna designs- Square Monopole, Semi-Elliptic Slot, Step and Linear Tapered slot - and an assay on their suitability in UWB Systems. Multiple resonances in the geometry are matched to UWB by redesigning the ground-patch interfaces. Techniques to avoid narrow band interference is proposed in the antenna level and their effect on a nano second pulse have also been investigated. The thesis proposes design guidelines to design the antenna on laminates of any permittivity and the analyzes are complete with results in the frequency and time domains.

Printed Monopole Antenna for Ultra Wide Band (UWB) Applications

The thesis is the outcome of the exhaustive theoretical and experimental investigations performed on Printed Monopole Antennas loaded with different geometries .The work presented in this thesis describes the development of a 3D- FDTD(Finite Difference Time Domain) Modeller using MATLAB for the numerical computation of the radiation characteristics of the antenna. The predicted results are verified experimentally and also through simulation using Ansoft HFSS.The effect of top loading of the monopole with different geometries ,the dimensions of the loading patch and ground plane and the material parameters of the dielectric substrate upon the radiation performance of the antenna is studied in detail. Optimized Printed Monopole antennas suitable for Ultra Wide Band (UWB) applications have been developed.

Wideband Printed Microstrip Antenna for Wireless Communications

A simple electromagnetically coupled wideband printed microstrip antenna having a 2:1 VSWR bandwidth of 38% covering the 5.2/5.8-GHz WLAN, HIPERLAN2, and HiSWANa communication bands is presented. The large bandwidth is obtained by adding a rectangular metal strip on a slotted square microstrip antenna. The antenna occupies an overall dimension of 42 times 55 times 3.2 mm3 when printed on a substrate of dielectric constant 4. It exhibits good radiation characteristics and moderate gain in the entire operating band. Details of the design along with experimental and simulation results are presented and discussed.

ACS fed printed F-shaped uniplanar antenna for dual band WLAN applications

An asymmetric coplanar strip (ACS) fed dual band F-shaped antenna covering the 2.4/5.2 GHz WLAN bands is presented. The optimized dimensions of the proposed uniplanar antenna are 21 mm × 19 mm when printed on a substrate of dielectric constant 4.4 and height 1.6 mm. The dual band nature of the antenna is brought about by the various current paths in the F-shaped structure and the ground plane. The antenna exhibits nearly omnidirectional radiation characteristics and moderate gain in both the operating bands. Details of the antenna design, simulation, and experimental results are presented and discussed.

A wideband printed monopole antenna for 2.4-GHz WLAN applications

A planar monopole antenna suitable for broadband wireless communication is designed and developed. With the use of a truncated ground plane, the proposed printed monopole antenna offers nearly 60% 2:1 VSWR bandwidth and good radiation characteristics for the frequencies across the operating band. A parametric study of the antenna is performed based on the optimized design, and a prototype of the antenna suitable for 2.4-GHz WLAN application is presented. The antenna can be easily integrated into wireless circuitry and is convenient for application in laptop computers.

Design and development of compact printed ultra wide band antennas

In recent years, there is a visible trend for products/services which demand seamless integration of cellular networks, WLANs and WPANs. This is a strong indication for the inclusion of high speed short range wireless technology in future applications. In this context UWB radio has a significant role to play as an extension/complement to existing cellular/access technology. In the present work, three major types of ultra wide band planar antennas are investigated: Monopole and Slot. Three novel compact UWB antennas, suitable for poratble applications, are designed and characterized, namely 1) Ground modified monopole 2) Serrated monopole 3) Triangular slot The performance of these designs have been studied using standard simulation tools used in industry/academia and they have been experimentally verified. Antenna design guidelines are also deduced by accounting the resonances in each structure. In addition to having compact sized, high efficiency and broad bandwidth antennas, one of the major criterion in the design of impulse-UWB systems have been the transmission of narrow band pulses with minimum distortion. The key challenge is not only to design a broad band antenna with constant and stable gain but to maintain a flat group delay or linear phase response in the frequency domain or excellent transient response in time domain. One of the major contributions of the thesis lies in the analysis of the frequency and timedomain response of the designed UWB antennas to confirm their suitability for portable pulsed-UWB systems. Techniques to avoid narrowband interference by engraving narrow slot resonators on the antenna is also proposed and their effect on a nano-second pulse have been investigated

A beginner's guide to referencing books based on the Harvard system

An interactive tutorial on how to reference books correctly. It begins with an example, and interactively draws the student through the stages of accessing the relevant information through to how to include the final citation in the bibliography. It concludes with a ‘test your knowledge’ set of activities. When you view this object note that the panel on the left generated by the repository can be dragged sideways to view the learning object full screen.

Estado del arte acerca de las discusiones teóricas sobre soberanía del estado y la unión monetaria europea entre 2002 - 2010. Caso: El Reino Unido

El siguiente trabajo tiene como objetivo el Estado del arte acerca de la discusión teórica de la repercusión de la unión monetaria en el principio de soberanía nacional, específicamente el caso de Gran Bretaña, ya que éste es el único país que expresa abiertamente su incertidumbre referente a algún tipo de amenaza a su soberanía. Se pretende precisar si existen criterios concluyentes, o por el contrario determinar si no hay claridad con respecto al futuro de Gran Bretaña como miembro de la unión monetaria.A partir de lo anterior, se plantean como sus propósitos particulares construir un marco conceptual acerca de la soberanía. Este estado del arte se inicia con citas de los principales autores de finales de siglo XVII y XVIII y finaliza con las posiciones conceptuales aportadas por los teóricos modernos motivados por el nacimiento de la Unión Europea como un nuevo orden político. Entre las que se citan: modelo centrico o intergubernamentalista, modelo de gobernabilidad multi-nivel, modelo neo-funcionalista y modelo federalista. Igualmente, el trabajo, busca desarrollar un marco conceptual sobre Unión Monetaria y su evolución hasta el logro de una unión fiscal europea en el periodo de 1950-2010, establecer las relaciones teóricas entre Soberanía del Estado y Unión Monetaria y por último realizar un análisis histórico hermenéutico de la Unión Europea y el caso del Reino Unido de acuerdo a las relaciones evidenciadas en los apartados teóricos entre soberanía del Estado y Unión Monetaria.

Quick printed guide to zappers (Turning Point 5)

One side of A4 which provides step-by-step instructions to help you use Tunring Point 5 in Common Learning Spaces. Includes advice about dealing with technical glitches.

Asociación de desórdenes músculo esqueléticos en región cervical, dorsal y lumbar y factores de riesgo psicosocial en conductores de vehículos de carga en una empresa de transporte terrestre en Bogotá, Colombia.

Este estudio buscó evaluar la asociación de desórdenes músculo esqueléticos en región cervical, dorsal y lumbar identificados mediante el Cuestionario Nórdico en su versión validada al español y los factores de riesgo psicosocial con el Cuestionario del contenido del trabajo (JCQ), en conductores de vehículos de carga de una empresa de transporte terrestre en Bogotá, Colombia; fue un estudio de corte transversal con la participación voluntaria de 125 conductores. Los resultados demostraron mayor prevalencia de trastornos músculo esqueléticos en región lumbar en los últimos 12 meses en el 36% de los participantes y en los últimos tres meses en región cervical con el 17.6%; la prevalencia de factores psicosociales arrojó trabajo de baja tensión en el 29.6%, trabajo activo 26.4%, trabajo con alta tensión 23.2% y trabajo pasivo con el 20.8%. El valor p fue mayor de 0,005 no hallándose asociaciones significativas de desórdenes músculo esqueléticos en región cervical, dorsal y lumbar con factores de riesgo psicosocial.

Aproximaciones al concepto de propiedad privada del suelo urbano. Estado del arte en latinoamérica 1990 - 2014

El presente trabajo pretende hacer una revisión de la bibliografía latinoamericana con respecto al concepto de propiedad del suelo urbano. Se explica primero el itinerario del concepto a través de la historia, rescatando los puntos más importantes del debate y las particularidades que cada contexto aportó a la formación del concepto actual, para ahondar después en el análisis de la situación del debate en el contexto latinoamericano desde 1990, explicando los puntos de discusión y las posiciones de los autores con respecto a los mismos, para después intentar intuir el devenir futuro del concepto en nuestro continente. En este trabajo se encontró que las problemáticas particulares de las ciudades latinoamericanas tienen una influencia importante en el devenir de la discusión proporcionándole un enfoque diferente en el tratamiento del concepto.