Evaluation of remote sensing for the detection of landfill gas and leachate in an urban environment

The technique of remote sensing provides a unique view of the earth's surface and considerable areas can be surveyed in a short amount of time. The aim of this project was to evaluate whether remote sensing, particularly using the Airborne Thematic Mapper (ATM) with its wide spectral range, was capable of monitoring landfill sites within an urban environment with the aid of image processing and Geographical Information Systems (GIS) methods. The regions under study were in the West Midlands conurbation and consisted of a large area in what is locally known as the Black Country containing heavy industry intermingled with residential areas, and a large single active landfill in north Birmingham. When waste is collected in large volumes it decays and gives off pollutants. These pollutants, landfill gas and leachate (a liquid effluent), are known to be injurious to vegetation and can cause stress and death. Vegetation under stress can exhibit a physiological change, detectable by the remote sensing systems used. The chemical and biological reactions that create the pollutants are exothermic and the gas and leachate, if they leave the waste, can be warmer than their surroundings. Thermal imagery from the ATM (daylight and dawn) and thermal video were obtained and used to find thermal anomalies on the area under study. The results showed that vegetation stress is not a reliable indicator of landfill gas migration, as sites within an urban environment have a cover too complex for the effects to be identified. Gas emissions from two sites were successfully detected by all the thermal imagery with the thermal ATM being the best. Although the results were somewhat disappointing, recent technical advancements in the remote sensing systems used in this project would allow geo-registration of ATM imagery taken on different occasions and the elimination of the effects of solar insolation.

A survey of urban open space using colour infra-red aerial photographs

There has been a dramatic change in the U.K. government policy regarding the establishment of new towns. The emphasis is now on the redevelopment of existing cities rather than on building new ones. This has created an urgent need to carry out detailed surveys and inventories of many aspects of urban land use in metropolitan areas: this study concentrates on just one aspect - urban open space. In the first stage a comparison was made between 1:10,000 scale black and white and 1:10,000 scale colour infra-red aerial photographs, to compare the type and amount of open space information which could be obtained from these two sources. The advantages of using colour infra-red photography were clearly demonstrated in this comparison. The second stage was the use of colour infra-red photography as the sole source of data to survey and map the urban open space of a sample area in Merseyside Metropolitan County. This sample area comprised eleven 1/4km2 squares, on each of which a 20m x 20m grid cell was placed to record, directly from the photography, 625 sets of data. Each set of data recorded the type and amount of open space, its surface cover, maintenance status and management. The data recorded were fed into a computer and a suite of programs was developed to provide output in both computer map and statistical form, for each of the eleven -1/4km2 -sample areas. The third stage involved a comparison of open space data with socio-economic status. Merseyside County Planning Authority had previously conducted a socio-economic survey of the county, and this information was used to identify ' the socio-economic status of the population in the eleven ilkm2 areas of this project. This comparison revealed many interesting and useful relationships between the provision of urban open space and socio-economic status.

The use of spot simulation imagery for forestry mapping and management

SPOT simulation imagery was acquired for a test site in the Forest of Dean in Gloucestershire, U.K. This data was qualitatively and quantitatively evaluated for its potential application in forest resource mapping and management. A variety of techniques are described for enhancing the image with the aim of providing species level discrimination within the forest. Visual interpretation of the imagery was more successful than automated classification. The heterogeneity within the forest classes, and in particular between the forest and urban class, resulted in poor discrimination using traditional `per-pixel' automated methods of classification. Different means of assessing classification accuracy are proposed. Two techniques for measuring textural variation were investigated in an attempt to improve classification accuracy. The first of these, a sequential segmentation method, was found to be beneficial. The second, a parallel segmentation method, resulted in little improvement though this may be related to a combination of resolution in size of the texture extraction area. The effect on classification accuracy of combining the SPOT simulation imagery with other data types is investigated. A grid cell encoding technique was selected as most appropriate for storing digitised topographic (elevation, slope) and ground truth data. Topographic data were shown to improve species-level classification, though with sixteen classes overall accuracies were consistently below 50%. Neither sub-division into age groups or the incorporation of principal components and a band ratio significantly improved classification accuracy. It is concluded that SPOT imagery will not permit species level classification within forested areas as diverse as the Forest of Dean. The imagery will be most useful as part of a multi-stage sampling scheme. The use of texture analysis is highly recommended for extracting maximum information content from the data. Incorporation of the imagery into a GIS will both aid discrimination and provide a useful management tool.

The investigation of vegetation change using remote sensing to detect and monitor migration of landfill gas

Decomposition of domestic wastes in an anaerobic environment results in the production of landfill gas. Public concern about landfill disposal and particularly the production of landfill gas has been heightened over the past decade. This has been due in large to the increased quantities of gas being generated as a result of modern disposal techniques, and also to their increasing effect on modern urban developments. In order to avert diasters, effective means of preventing gas migration are required. This, in turn requires accurate detection and monitoring of gas in the subsurface. Point sampling techniques have many drawbacks, and accurate measurement of gas is difficult. Some of the disadvantages of these techniques could be overcome by assessing the impact of gas on biological systems. This research explores the effects of landfill gas on plants, and hence on the spectral response of vegetation canopies. Examination of the landfill gas/vegetation relationship is covered, both by review of the literature and statistical analysis of field data. The work showed that, although vegetation health was related to landfill gas, it was not possible to define a simple correlation. In the landfill environment, contribution from other variables, such as soil characteristics, frequently confused the relationship. Two sites are investigated in detail, the sites contrasting in terms of the data available, site conditions, and the degree of damage to vegetation. Gas migration at the Panshanger site was dominantly upwards, affecting crops being grown on the landfill cap. The injury was expressed as an overall decline in plant health. Discriminant analysis was used to account for the variations in plant health, and hence the differences in spectral response of the crop canopy, using a combination of soil and gas variables. Damage to both woodland and crops at the Ware site was severe, and could be easily related to the presence of gas. Air photographs, aerial video, and airborne thematic mapper data were used to identify damage to vegetation, and relate this to soil type. The utility of different sensors for this type of application is assessed, and possible improvements that could lead to more widespread use are identified. The situations in which remote sensing data could be combined with ground survey are identified. In addition, a possible methodology for integrating the two approaches is suggested.

Obstacles and solutions to maximising urban biodiversity throughout the lifecycles of major developments in England

Thus far, achieving net biodiversity gains through major urban developments has been neither common nor straightforward - despite the presence of incentives, regulatory contexts, and ubiquitous practical guidance tools. A diverse set of obstructions, occurring within different spatial, temporal and actor hierarchies, are experienced by practitioners and render the realisation of maximised biodiversity, a rarity. This research aims to illuminate why this is so, and what needs to be changed to rectify the situation. To determine meaningful findings and conclusions, capable of assisting applied contexts and accommodating a diverse range of influences, a ‘systems approach’ was adopted. This approach led to the use of a multi-strategy research methodology, to identify the key obstructions and solutions to protecting and enhancing biodiversity - incorporating the following methods: action research, a questionnaire to local government ecologists, interviews and personal communications with leading players, and literature reviews. Nevertheless, ‘case studies’ are the predominant research method, the focus being a ‘nested’ case study looking at strategic issues of the largest regeneration area in Europe ‘the Thames Gateway’, and the largest individual mixeduse mega-development in the UK (at the time of planning consent) ‘Eastern Quarry 2’ - set within the Gateway. A further key case study, focussing on the Central Riverside development in Sheffield, identifies the merits of competition and partnership. The nested cases, theories and findings show that the strategic scale - generally relating to governance and prioritisation - impacts heavily upon individual development sites. It also enables the identification of various processes, mechanisms and issues at play on the individual development sites, which primarily relate to project management, planning processes, skills and transdisciplinary working, innovative urban biodiversity design capabilities, incentives, organisational cultures, and socio-ecological resilience. From these findings a way forward is mapped, spanning aspects from strategic governance to detailed project management.

Philosophy, theory, and practice of green operations management

This paper proposes a more profound discussion of the philosophical underpins of sustainability than currently exists in the MOT literature and considers their influence on the construction of the theories on green operations and technology management. Ultimately, it also debates the link between theory and practice on this subject area. The paper is derived from insights gained in three research projects completed during the past twelve years, primarily involving the first author. From 2000 to 2002, an investigation using scenario analysis, aimed at reducing atmospheric pollution in urban centres by substituting natural gas for petrol and diesel, provided the first set of insights about public policy, environmental impacts, investment analysis, and technological feasibility. The second research project, from 2003 to 2005, using a survey questionnaire, was aimed at improving environmental performance in livestock farming and explored the issues of green supply chain scope, environmental strategy and priorities. Finally, the third project, from 2006 to 2011, investigated environmental decisions in manufacturing organisations through case study research and examined the underlying sustainability drivers and decision-making processes. By integrating the findings and conclusions from these projects, the link between philosophy, theory, and practice of green operations and technology management is debated. The findings from all these studies show that the philosophical debate seems to have little influence on theory building so far. For instance, although ‘sustainable development’ emphasises ‘meeting the needs of current and future generation’, no theory links essentiality and environmental impacts. Likewise, there is a weak link between theory and the practical issues of green operations and technology management. For example, the well-known ‘life-cycle analysis’ has little application in many cases because the life cycle of products these days is dispersed within global production and consumption systems and there are different stakeholders for each life cycle stage. The results from this paper are relevant to public policy making and corporate environmental strategy and decision making. Most of the past and current studies in the subject of green operations and sustainability management deal with only a single sustainability dimension at any one time. Here the value and originality of this paper lies in its integration between philosophy, theory, and practice of green technology and operations management.