El territorio en el sistema agroalimentario: el tramo medio del valle del Duero 1900-2015

La lectura histórica del territorio en relación con el sistema agroalimentario aporta elementos claves para reconstruir el sistema territorial, aprovechando la oportunidad que ofrece un renovado interés por la alimentación local y sostenible. El análisis histórico transdisciplinar incorpora variables espaciales, económicas, energéticas, urbanísticas, agronómicas y nutricionales y se centra en el tramo medio del valle del Duero (Castilla y León, España). Se trata de un territorio tradicionalmente agrícola, donde un producto de la tierra -el vino- es motor de innovación y ha transformado paisajes y estructuras. Aún así, se enfrenta a un desarrollo desigual e ilustra las contradicciones del mundo rural en un contexto alimentario globalizado. El análisis de la región desde 1900 permite constatar la relación entre la organización del territorio, el sistema agroalimentario, y cada una de las etapas nutricionales: a) la superación de la desnutrición está asociada a una agricultura familiar y al territorio de proximidad, que persiste en la zona hasta 1950; b) el modelo de consumo de masas y sobrealimentación, se basa en una agricultura industrializada y un territorio polarizado ligado al desarrollismo, que se extiende hasta 1985; c) finalmente, el modelo de consumo segmentado se apoya en una agricultura terciarizada y un territorio de enclaves en un contexto de globalización, que dura hasta nuestros días. En la última fase aparecen nuevos modelos alternativos de reconstrucción territorial con sistemas emergentes que reconectan campo y ciudad, consumo y producción desde sistemas de alimentación sostenible. Conviven dos tendencias: una hacia la jerarquización y el productivismo tecnificado y otra hacia la multifuncionalidad y la recampesinización que se reapropia de las innovaciones técnicas. La adaptación a las condiciones locales y aprovechar los recursos endógenos son elementos clave de sostenibilidad ambiental y social. Incorporar la alimentación en la planificación urbana y territorial desde una perspectiva agroecológica reduciría la insostenibilidad del sistema alimentario. Las propuestas de ordenación han de tener en cuenta la tipología de municipios, sus interrelaciones, las características agrológicas y productivas, la relación del muncipcon los núcleos de referencia y con las poblaciones que concentran las necesidades de alimentación. Se debe considerar asimismo la disponiblidad de infraestructuras, de equipamientos y de capital humano y relacional para fijar cadena de valor local. La ordenación urbanística cuenta ya con mecanismos como la clasificación del suelo, la regulación de usos y el diseño de redes de equipamientos que inciden sobre la autonomía de los sistema de alimentación locales y permiten fomentar la biodiversidad y las variedades locales. Son mecanismos insuficientemente aprovechados. Una adecuada utilización de los instrumentos de ordenación existentes, junto con el desarrollo de otros nuevos mejorarían de forma significativa la resiliencia de los sistemas agroalimentarios locales. ABSTRACT The historical review of the relationship between territory and agrifood system provides key lessons to help rebuild the territorial fabric, seizing the opportunity offered by a renewed interest in local and sustainable food. The historical transdisciplinary analysis spans spatial, economic, energy, agronomic and nutritional variables, focuses on the middle reaches of the Douro valley (Castilla y Leon, Spain). This a traditionally agricultural region, which has managed to turn a land product – the wine– into an engine of innovation which has transformed landscapes and structures. Even so, it faces the challenges of uneven development and illustrates the contradictions of the rural world in a globalized context. After the analysis of the evolution of the region since 1900, it can be concluded that the territory has been organized over time according to three models of food system that are in turn linked to different nutritional stages: a) the nutritional stage of overcoming malnutrition is related to family agriculture and a territory of proximity, which persists in the studied area until 1950; b) the model of mass consumption and overeating, was built on an industrialized agriculture and a polarized territory with unhindered development, which runs until 1985; c) and, finally, the model of consumer segmentation associated with terciarized agriculture and enclave territories in the context of globalization, which lasts until present time. During this last stage new alternative models of small-scale territorial reconstruction appear, linked to emerging systems that, based on sustainable food systems, reconnect city and countryside, consumption and production. Actually two trends coexist: one towards hierarchisation and tech-based productivism, and another one towards multifunctionality and peasantization that reappropriates technical innovations. The adaptation to local conditions taking advantage of local resources is a key element of environmental and social sustainability. Integrating food into urban and regional planning from an agroecological perspective would help reduce the current unsustainability of the food system. Planning proposals for municipalities need to consider their typology, agrological characteristics, productive capacity, links to other municipalities, proximity to reference nodes and population concentrations with food demands that need to be met. Availability of infrastructure, facilities, as well as human and relational capital to establish and reinforce local value chains is another aspect to consider in planning proposals. Spatial and urban planning are already equipped with mechanisms, such as land classification and the design of facilities’ networks, that affect the autonomy and stability of local food systems and can support biodiversity and adoption of local varieties. We are, however, missing opportunities. An adequate use of existing planning tools and the development of new ones could significantly improve the resilience of local agrifood systems.

Re-Ocupación y/o Re-Construcción de estructuras urbanas en desuso y su conexión con el espacio público y el paisaje

Los nuevos comportamientos urbanos nos permiten observar cada vez con más frecuencia en nuestras calles y plazas realidades que siempre habíamos considerado domésticas. Al contrario también pasa, todos los días vivimos en nuestras casas situaciones que implican relacionarnos con personas que no son de nuestro núcleo familiar. El diseño doméstico de nuestras ciudades y el urbanismo del diseño de interiores parecen herramientas oportunas en el mundo que nos ha tocado vivir. Esto nos lleva a pensar que los espacios públicos y privados son términos simplificados, definidos en base a conceptos de propiedad para organizar la ciudad. En cambio, sus usos y vivencias, su gestión y sus comportamientos se han complejizado, distorsionando la terminología convencional hasta hacerla obsoleta. En este contexto, considerado también el marco socioeconómico actual, surgen las “acciones de abajo a arriba” como nuevo paradigma o modelo de renovación urbana, que entienden la involucración del ciudadano como parte activa en el proceso de construcción de la urbe desde la misma gestación del proyecto, frente a las acciones habituales que consideran al usuario como mero receptor de las propuestas. Un ciudadano que parece estar cada vez más radicalizado y una administración que parece asustarse ante el desconcierto que el acercamiento al ciudadano puede acarrear, han ocasionado por un lado, espacios “gueto” de carácter casi anárquico y, por el otro lado, lugares tan institucionalizados que derivan en espacios asociados a la administración y ajenos al ciudadano. Por ello, se considera imprescindible la colaboración entre ambos poderes. De acuerdo con el discurso que precede, dentro de un marco comparativo, se estudian 5 supuestos seleccionados de las ciudades Madrid y Zaragoza. Madrid porque es referencia nacional e internacional en el desarrollo urbano a través de procesos ‘abajo arriba’. Zaragoza porque es una ciudad ‘media’ que históricamente no se ha definido por estrategias urbanas claras, ya sean de carácter social o institucional. Sin embargo, en el momento actual se pueden identificar planteamientos relacionados con la recuperación de construcciones y espacios vacantes que pueden ser determinantes a la hora de alcanzar equilibrios con los intensos procesos institucionales acaecidos en las dos últimas décadas. De los procesos urbanos registrados en cada lugar, desarrollados en construcciones y espacios vacantes, he seleccionado: Construcciones Vacantes Madrid |Tabacalera de Lavapiés Zaragoza | Antiguo I.E.S. Luis Buñuel y antiguo Convento de Mínimos Espacios Vacantes Madrid | Campo de Cebada [solar] Zaragoza | Patio ‘antiguo I.E.S. Luis Buñuel [espacio libre] y plaza Eduardo Ibarra [espacio libre] El proyecto de investigación ha partido de las hipótesis de partida que siguen: UNA… Las ‘acciones de abajo arriba’ o renovación desde abajo no tienen cabida como elementos urbanos aislados sino conectados entre sí, posibilitando la producción de sinergias y la construcción de la ciudad; pudiendo ser consideradas acciones de desarrollo y enlace urbano, pues su objetivo es convertirse en motores del espacio público. Cuestión que es aplicable al resto de los procesos o acciones urbanas [‘horizontales’ o ‘institucionales’] DOS… La capacidad de adaptación manifestada por las ‘acciones de abajo arriba’ implica un marco ideológico de referencia asociado a la importancia de la construcción con mínimos recursos [Re-ocupación y/o Re- Construcción de estructuras urbanas en desuso] en los procesos urbanos descritos, como vía para comprender los concepto sostenibilidad y calidad figurativa de lo construido. Cuestión que es aplicable a la recuperación de aquellos aspectos de la arquitectura que la convierten en necesaria para la sociedad. Y tiene como objetivo: Identificar modelos de sostenibilidad urbana como una estrategia que va de lo individual a lo colectivo y que se transmite fundamentalmente con la acción, mezclando la innovación y la tecnología en múltiples ámbitos, utilizando los recursos naturales e intelectuales de una manera eficiente y entendiendo la inteligencia humana y sobre todo la inteligencia colectiva, como principio y justificación. Se han analizado los siguientes aspectos: sociales [participación ciudadana e implicación de la administración pública], urbanos [conexiones con otros colectivos o espacios urbanos / transformaciones urbanas a través de los procesos de gestión utilizados], constructivos [materiales utilizados en la re-construcción de construcciones y espacios vacantes / sistemas constructivos utilizados] y los relacionados con la sostenibilidad [sostenibilidad económica / sostenibilidad de mantenimiento / sostenibilidad funcional / inteligencia colectiva] El estudio de los aspectos considerados se ha desarrollado con las herramientas metodológicas siguientes: Entrevistas abiertas a expertos: se han obtenido respuestas de 25 personas expertas [5 por cada espacio o construcción vacante] relacionadas con las acciones urbanas sostenibles, la cultura y las relaciones sociales, y que también conocen los lugares y su entorno desde los puntos de vista urbano y construido. Son ‘tipos ideales’ asociados a uno de los cinco poderes que se manifiestan en la ciudad: el poder educativo [la universidad], el poder creativo [la cultura], el poder administrativo [la política], el poder empresarial [la empresa privada] y los usuarios [un usuario activo y representativo de cada lugar elegido que haya intervenido en la gestación del proceso]. Han sido personas que conocían el tejido social y urbano de la ciudad de Zaragoza y Madrid, ya que la herramienta ‘entrevista abierta a expertos’, recoge datos y opiniones planteadas en las construcciones y espacios vacantes ubicados en Zaragoza y Madrid. Entrevistas cerradas a usuarios: como la población de usuarios que se somete a la investigación es infinita o muy grande, resulta imposible o inconveniente realizar la obtención de los datos sobre todos aquellos elementos que la forman. Por lo tanto, he decidido estudiar sólo una parte de la población que denomino ‘tipos ideales’, obteniendo respuestas de 150 usuarios [30 personas por cada espacio o construcción vacante]. La selección de grupos de personas entrevistadas, debe permitir que los resultados sean representativos de la población total de usuarios. Además, la elección de ‘tipos ideales’ se ha identificado con los vecinos de los núcleos urbanos [o barrios] en los que se ubican las construcciones o espacios vacantes analizados. Observación estructurada: recoger información a través de la observación me ha permitido conocer las actuaciones y comportamientos de los ciudadanos en el medio urbano. Esto ha facilitado el estudio del medio a nivel práctico, valorando el uso que la sociedad da a las construcciones y a los espacios vacantes analizados. Es importante posicionar la estrategia en relación con el tema de investigación propuesto. Una estrategia que dibuje un panorama plural, desarrollado a través de herramientas sociales y constructivas que permitan que la arquitectura hable de cosas parecidas a lo que interesa a la ciudadanía. Para ello, propuse un catálogo de herramientas arquitectónicas que han permitido evaluar todas las propuestas. Un contexto de estrategias comunes que han descrito con los mismos códigos las distintas actuaciones analizadas. Estas herramientas tocan diferentes campos de interés. Desde las partes más tectónicas y constructivas, hasta las más ligadas con el desarrollo urbanístico y social. Acciones de participación colectiva: Experiencias o laboratorios urbanos participados por los alumnos del grado de arquitectura de la UNIZAR y los agentes sociales. Las acciones son una herramienta propositiva. Investigar y analizar proponiendo ha permitido que el análisis del contexto pueda llegar a capas de mucha más profundidad. No se ha trabajado estableciendo jerarquías de profesores y alumnos, sino que se ha intentado posibilitar la conexión de distintos agentes que trabajan coordinadamente durante el tiempo que han durado las acciones. Por un lado esto ha permite que cada integrante haya aportado al grupo lo que mejor sabe hacer y de la misma manera, que cada uno pueda aprender aquello de lo que tenga más ganas… y reflexionar sobre determinados aspectos objeto del análisis. Una vez interpretados los resultados, obtenidos a través de las herramientas metodológicas referenciadas, se ha concluido lo que sigue: Respecto de la Hipótesis de partida UNO LAS ACCIONES ‘ABAJO ARRIBA’ han revelado que no se puede entender ningún proceso de gestión urbana fuera de la participación ciudadana. El ‘ESPACIO LIBRE’ de una ciudad necesita lugares de autogestión, espacios de cogestión, movimientos de ‘arriba abajo’ y también modelos que todavía no sabemos ni que existen. LAS ACCIONES INSTITUCIONALES ‘ARRIBA ABAJO’ han demostrado que no han presentado permeabilidad ni relación con las circulaciones de entorno. Tampoco han tenido en cuenta a otras muchas personas, ‘usuarios productores’, a las que les interesan los procesos de búsqueda y las fórmulas de conexión más interactivas. Respecto de la hipótesis de partida DOS LAS ACCIONES ‘ABAJO ARRIBA’ han revelado que el ‘derecho a la ciudad’, paradigma defendido por Lefebvre desde el cual se piensa el urbanismo ciudadano, en estos supuestos podría entenderse como el ‘derecho a la infraestructura’. El ESPACIO LIBRE es infraestructura y se quiere para infraestructurar los derechos de cada uno. Y aunque también es verdad que estas acciones son simples destellos, han hecho visible otro paradigma de gestión y propuesta urbana que puede ser predominante en un futuro próximo. LAS ACCIONES INSTITUCIONALES ‘ARRIBA ABAJO’ han revelado que las intervenciones estuvieron enfocadas únicamente a la resolución de los procesos constructivos y a la incorporación del programa como un dato ‘problema’ que era necesario resolver para evitar la afección al diseño. ABSTRACT The new urban ways of behaviour let us watch more and more frequently in our streets and squares, realities that we had always considered as domestic. This also happens the other way round. Every day we have to go through situations at home which imply relationships with people who don’t belong to our family circle. The domestic design of our cities and the urban planning of indoor design seem to be adequate tools in the world we have to live in. This leads us to think that public and private spaces are simplified terms, defined according to concepts of property in order to organise the city. On the other hand, its uses and the experiences of people, its management and ways of behaviour is now more complex, changing the conventional terminology that has become outdated. In this context, ‘bottom-up’ actions arise as a new paradigm or model of urban renewal. These actions consider the active role of social participation in the process of building up the city from the very beginning, in comparison with the former way of acting that considered the user as mere receptor of the proposals. A citizen who seems to become more and more radical, and an administration that seems to be afraid of the unknown, have created both almost anarchic ghetto spaces and, on the other hand, spaces which have been so institutionalised that derive into areas associated to the administration but alienated from the citizen. For this reason, cowork of both forces is considered as crucial. In accordance with the above mentioned ideas and within a comparative framework, five situations chosen from the cities of Madrid and Zaragoza are studied. Madrid because is a national and international reference in urban development that uses “bottom-up” processes. Zaragoza because is a “medium-size” city that, historically, has not been defined by clear social or institutional urban strategies. Nevertheless, at the present time we can identify approaches on the recovery of constructions and empty areas that may be determining for reaching a balance with the intense institutional processes that have taken place in the two last decades. From the urban processes registered in every place and developed in vacant areas and constructions, I have chosen: Vacant constructions Madrid | Lavapiés Tobacco Factory Zaragoza | Old Secondary School Luis Buñuel and old Convent of the Minimos Vacant areas Madrid | Campo de Cebada [non-built site]. Zaragoza | Old courtyard of the secondary school and Eduardo Ibarra square [free space] The research project has been issued from the following starting hypotheses: ONE… “Bottom-up actions” or renewal from below have no place as isolated urban elements but as connected parts that can produce synergies and the construction of the city, and that can also be considered as actions producing urban development and links. This can also be applied to the rest of urban processes or actions [‘horizontal’ or ‘institutional’]. TWO… The capacity of adaptation shown by “bottom-up actions” implies an ideological framework of reference which is related to the importance of construction with minimal resources (re-occupation and/or reconstruction of urban structures in disuse) in the above mentioned urban processes, as a way for understanding the concepts of sustainability and the representational quality of what has been constructed. This can also be applied to the recovery of those architectural aspects that make architecture necessary for society. And its objective is: Identify models of urban sustainability as a strategy going from the individual to the collective, which are mainly transferred by action and that mix innovation and technology in many fields. Models that use natural and intellectual resources in an efficient way, and understand human intelligence and, above all, collective intelligence, as principle and justification. The following aspects have been analysed: social [civic participation and involvement of the public Administration], urban [connections with other collectives or urban spaces / urban transformation by the processes of administration used], constructive [materials used for the re-construction of empty spaces / construction systems used] and those focusing on sustainability [economic sustainability /maintenance sustainability /functional sustainability / collective intelligence]. For researching into the above mentioned aspects, the following methodological tools have been developed: Open interviews with experts: answers from 25 experts have been obtained [five for every vacant space or empty construction] on sustainable urban actions, culture and social relations, who also know the places and their environment from an urban and constructive point of view. These are “ideal types” linked to one of the five powers acting in the city: the educational power [University], the creative power [culture], the administration power [politics], the corporate power [private companies] and the users [an active and representative user for every place selected during the establishment of the process]. They were people who knew the social and urban fabric of Zaragoza and Madrid, since the “open interview for experts” tool collects data and points of view set out in vacant constructions and spaces of Zaragoza and Madrid. Close interviews with users: as the number of users targeted for the research is very big or infinite, it is impossible or inconvenient to get data from all its constituent parts. Therefore, I have decided to research into the part of the population that I call “ideal types”, obtaining answers from 150 users [30 people for every empty space or construction]. The selection of the groups of people interviewed must produce results which are representative of the total population of users. Furthermore, the election of “ideal types” has been identified with the inhabitants of urban areas [or city districts] in which the vacant spaces or constructions analysed are located. A structured observation: I have known the actions and ways of behaving of the citizens in the urban environment by means of collecting information after observation. Therefore, the practical research into the target environment has been easier by valuing the use that society gives to the empty constructions and spaces analysed. It is important to position the strategy with respect to the research subject proposed. It involves a strategy able to get an overview of a plural landscape, developed by social and constructive tools, allowing architecture to talk about topics which are interesting for city dwellers. Therefore, I proposed a set of architectural tools to evaluate all the proposals. A context of common strategies describing the different actions analysed by using the same codes. These tools focus on different fields of interests, from the most tectonic and constructive parts, to the most related to urban and social development. Actions on collective participation: experiences or urban laboratories shared by the students of architecture of the University of Zaragoza and social agents. The actions are a proactive tool. Researching and analysing by means of proposing, has allowed me to analyse the context and much deeper layers. This work has not been done by establishing ranks of professors and student, but trying to get an interaction between the different agents who work in close coordination during the implementation of the actions. This has allowed every agent to contribute the group what they do the best, and also every individual has had the possibility to learn what s/he prefers…, thinking about the different aspects targeted by the analysis. Once the different methodological tools have been interpreted, this is the conclusion: With regard to the initial hypothesis ONE “BOTTOM-UP” ACTIONS have proven that no process of urban management can be understood outside civic participation. The “FREE SPACE” of a city needs self-managed places, co-managed spaces, “up-bottom” movements, and also models whose existence is still ignored. “UP-BOTTOM” INSTITUTIONAL ACTIONS have proven that they have not presented neither permeability nor relation with local ideas. They have also disregarded many other people, the “usersproducers”, who are interested in the most interactive means of searching and connecting processes. With regard to the initial hypothesis TWO Under these premises, “BOTTOM-UP” ACTIONS have shown that the “right to the city”, a paradigm defended by Lefebvre and from which citizen-focused urbanism is conceived, could be considered as a “right to the infrastructures”. A FREE SPACE is an infrastructure and must be used to “infrastructure” the rights of every citizen. And, even though it is true that these actions are mere flashes, they have made visible another paradigm of management and urban proposal that can be prevailing in a near future. “UP-BOTTOM” INSTITUTIONAL ACTIONS have revealed that the interventions have only focused on resolving construction processes and the incorporation of the program as a “problem” data that was necessary to resolve in order to avoid its influence on the design.

Urban microclimate and thermal comfort modelling: strategies for urban renovation

The urban microclimate plays an important role in building energy consumption and thermal comfort in outdoor spaces. Nowadays, cities need to increase energy efficiency, reduce pollutant emissions and mitigate the evident lack of sustainability. In light of this, attention has focused on the bioclimatic concepts use in the urban development. However, the speculative unsustainability of the growth model highlights the need to redirect the construction sector towards urban renovation using a bioclimatic approach. The public space plays a key role in improving the quality of today’s cities, especially in terms of providing places for citizens to meet and socialize in adequate thermal conditions. Thermal comfort affects perception of the environment, so microclimate conditions can be decisive for the success or failure of outdoor urban spaces and the activities held in them. For these reasons, the main focus of this work is on the definition of bioclimatic strategies for existing urban spaces, based on morpho-typological components, urban microclimate conditions and comfort requirements for all kinds of citizens. Two case studies were selected in Madrid, in a social housing neighbourhood constructed in the 1970s based on Rational Architecture style. Several renovation scenarios were performed using a computer simulation process based in ENVI-met and diverse microclimate conditions were compared. In addition, thermal comfort evaluation was carried out using the Universal Thermal Climate Index (UTCI) in order to investigate the relationship between microclimate conditions and thermal comfort perception. This paper introduces the microclimate computer simulation process as a valuable support for decision-making for neighbourhood renovation projects in order to provide new and better solutions according to the thermal quality of public spaces and reducing energy consumption by creating and selecting better microclimate areas.

Design and implementation of an adaptive dashboard and visualization interface for the dynamic optimization and control of Data Centers

Over the last few years, the Data Center market has increased exponentially and this tendency continues today. As a direct consequence of this trend, the industry is pushing the development and implementation of different new technologies that would improve the energy consumption efficiency of data centers. An adaptive dashboard would allow the user to monitor the most important parameters of a data center in real time. For that reason, monitoring companies work with IoT big data filtering tools and cloud computing systems to handle the amounts of data obtained from the sensors placed in a data center.Analyzing the market trends in this field we can affirm that the study of predictive algorithms has become an essential area for competitive IT companies. Complex algorithms are used to forecast risk situations based on historical data and warn the user in case of danger. Considering that several different users will interact with this dashboard from IT experts or maintenance staff to accounting managers, it is vital to personalize it automatically. Following that line of though, the dashboard should only show relevant metrics to the user in different formats like overlapped maps or representative graphs among others. These maps will show all the information needed in a visual and easy-to-evaluate way. To sum up, this dashboard will allow the user to visualize and control a wide range of variables. Monitoring essential factors such as average temperature, gradients or hotspots as well as energy and power consumption and savings by rack or building would allow the client to understand how his equipment is behaving, helping him to optimize the energy consumption and efficiency of the racks. It also would help him to prevent possible damages in the equipment with predictive high-tech algorithms.

Analysis and Design Considerations of an Electric Vehicle Powertrain regarding Energy Efficiency and Magnetic Field Exposure

En esta tesis se analiza el sistema de tracción de un vehículo eléctrico de batería desde el punto de vista de la eficiencia energética y de la exposición a campos magnéticos por parte de los pasajeros (radiación electromagnética). Este estudio incluye tanto el sistema de almacenamiento de energía como la máquina eléctrica, junto con la electrónica de potencia y los sistemas de control asociados a ambos. Los análisis y los resultados presentados en este texto están basados en modelos matemáticos, simulaciones por ordenador y ensayos experimentales a escala de laboratorio. La investigación llevada a cabo durante esta tesis tuvo siempre un marcado enfoque industrial, a pesar de estar desarrollada en un entorno de considerable carácter universitario. Las líneas de investigación acometidas tuvieron como destinatario final al diseñador y al fabricante del vehículo, a pesar de lo cual algunos de los resultados obtenidos son preliminares y/o excesivamente académicos para resultar de interés industrial. En el ámbito de la eficiencia energética, esta tesis estudia sistemas híbridos de almacenamiento de energía basados en una combinación de baterías de litio y supercondensadores. Este tipo de sistemas son analizados desde el punto de vista de la eficiencia mediante modelos matemáticos y simulaciones, cuantificando el impacto de ésta en otros parámetros tales como el envejecimiento de las baterías. Respecto a la máquina eléctrica, el estudio se ha centrado en máquinas síncronas de imanes permanentes. El análisis de la eficiencia considera tanto el diseño de la máquina como la estrategia de control, dejando parcialmente de lado el inversor y la técnica de modulación (que son incluidos en el estudio como fuentes adicionales de pérdidas, pero no como potenciales fuentes de optimización de la eficiencia). En este sentido, tanto la topología del inversor (trifásico, basado en IGBTs) como la técnica de modulación (control de corriente en banda de histéresis) se establecen desde el principio. El segundo aspecto estudiado en esta tesis es la exposición a campos magnéticos por parte de los pasajeros. Este tema se enfoca desde un punto de vista predictivo, y no desde un punto de vista de diagnóstico, puesto que se ha desarrollado una metodología para estimar el campo magnético generado por los dispositivos de potencia de un vehículo eléctrico. Esta metodología ha sido validada mediante ensayos de laboratorio. Otros aspectos importantes de esta contribución, además de la metodología en sí misma, son las consecuencias que se derivan de ella (por ejemplo, recomendaciones de diseño) y la comprensión del problema proporcionada por esta. Las principales contribuciones de esta tesis se listan a continuación: una recopilación de modelos de pérdidas correspondientes a la mayoría de dispositivos de potencia presentes en un vehículo eléctrico de batería, una metodología para analizar el funcionamiento de un sistema híbrido de almacenamiento de energía para aplicaciones de tracción, una explicación de cómo ponderar energéticamente los puntos de operación par-velocidad de un vehículo eléctrico (de utilidad para evaluar el rendimiento de una máquina eléctrica, por ejemplo), una propuesta de incluir un convertidor DC-DC en el sistema de tracción para minimizar las pérdidas globales del accionamiento (a pesar de las nuevas pérdidas introducidas por el propio DC-DC), una breve comparación entre dos tipos distintos de algoritmos de minimización de pérdidas para máquinas síncronas de imanes permanentes, una metodología predictiva para estimar la exposición a campos magnéticos por parte de los pasajeros de un vehículo eléctrico (debida a los equipos de potencia), y finalmente algunas conclusiones y recomendaciones de diseño respecto a dicha exposición a campos magnéticos. ABSTRACT This dissertation analyzes the powertrain of a battery electric vehicle, focusing on energy efficiency and passenger exposure to electromagnetic fields (electromagnetic radiation). This study comprises the energy storage system as well as the electric machine, along with their associated power electronics and control systems. The analysis and conclusions presented in this dissertation are based on mathematical models, computer simulations and laboratory scale tests. The research performed during this thesis was intended to be of industrial nature, despite being developed in a university. In this sense, the work described in this document was carried out thinking of both the designer and the manufacturer of the vehicle. However, some of the results obtained lack industrial readiness, and therefore they remain utterly academic. Regarding energy efficiency, hybrid energy storage systems consisting in lithium batteries, supercapacitors and up to two DC-DC power converters are considered. These kind of systems are analyzed by means of mathematical models and simulations from the energy efficiency point of view, quantifying its impact on other relevant aspects such as battery aging. Concerning the electric machine, permanent magnet synchronous machines are studied in this work. The energy efficiency analysis comprises the machine design and the control strategy, while the inverter and its modulation technique are taken into account but only as sources of further power losses, and not as potential sources for further efficiency optimization. In this sense, both the inverter topology (3-phase IGBT-based inverter) and the switching technique (hysteresis current control) are fixed from the beginning. The second aspect studied in this work is passenger exposure to magnetic fields. This topic is approached from the prediction point of view, rather than from the diagnosis point of view. In other words, a methodology to estimate the magnetic field generated by the power devices of an electric vehicle is proposed and analyzed in this dissertation. This methodology has been validated by laboratory tests. The most important aspects of this contribution, apart from the methodology itself, are the consequences (for instance, design guidelines) and the understanding of the magnetic radiation issue provided by it. The main contributions of this dissertation are listed next: a compilation of loss models for most of the power devices found in a battery electric vehicle powertrain, a simulation-based methodology to analyze hybrid energy storage performance in traction applications, an explanation of how to assign energy-based weights to different operating points in traction drives (useful when assessing electrical machine performance, for instance), a proposal to include one DC-DC converter in electric powertrains to minimize overall power losses in the system (despite the new losses added by the DC-DC), a brief comparison between two kinds of loss-minimization algorithms for permanent magnet synchronous machines in terms of adaptability and energy efficiency, a predictive methodology to estimate passenger magnetic field exposure due to power devices in an electric vehicle, and finally some useful conclusions and design guidelines concerning magnetic field exposure.

Monitoring protein–protein interactions in intact eukaryotic cells by β-galactosidase complementation

We present an approach for monitoring protein–protein interactions within intact eukaryotic cells, which should increase our understanding of the regulatory circuitry that controls the proliferation and differentiation of cells and how these processes go awry in disease states such as cancer. Chimeric proteins composed of proteins of interest fused to complementing β-galactosidase (β-gal) deletion mutants permit a novel analysis of protein complexes within cells. In this approach, the β-gal activity resulting from the forced interaction of nonfunctional weakly complementing β-gal peptides (Δα and Δω) serves as a measure of the extent of interaction of the non-β-gal portions of the chimeras. To test this application of lacZ intracistronic complementation, proteins that form a complex in the presence of rapamycin were used. These proteins, FRAP and FKBP12, were synthesized as fusion proteins with Δα and Δω, respectively. Enzymatic β-gal activity served to monitor the formation of the rapamycin-induced chimeric FRAP/FKBP12 protein complex in a time- and dose-dependent manner, as assessed by histochemical, biochemical, and fluorescence-activated cell sorting assays. This approach may prove to be a valuable adjunct to in vitro immunoprecipitation and crosslinking methods and in vivo yeast two-hybrid and fluorescence energy transfer systems. It may also allow a direct assessment of specific protein dimerization interactions in a biologically relevant context, localized in the cell compartments in which they occur, and in the milieu of competing proteins.

Design of fast enzymes by optimizing interaction potential in active site

The diffusional encounter between substrate and enzyme, and hence catalytic efficiency, can be enhanced by mutating charged residues on the surface of the enzyme. In this paper we present a simple method for screening such mutations. This is based on our earlier result that electrostatic enhancement of the enzyme-substrate binding rate constant can be accounted for just by the interaction potential within the active site. Assuming that catalytic and structural integrity is maintained, the catalytic efficiency can be optimized by surface charge mutations which lead to stronger interaction potential within the active site. Application of the screening method on superoxide dismutase shows that only charge mutations close to the active site will have practical effect on the catalytic efficiency. This rationalizes a large number of findings obtained in previous simulation and experimental studies.

Interaction between like-charged colloidal spheres in electrolyte solutions

How colloidal particles interact with each other is one of the key issues that determines our ability to interpret experimental results for phase transitions in colloidal dispersions and our ability to apply colloid science to various industrial processes. The long-accepted theories for answering this question have been challenged by results from recent experiments. Herein we show from Monte-Carlo simulations that there is a short-range attractive force between identical macroions in electrolyte solutions containing divalent counterions. Complementing some recent and related results by others, we present strong evidence of attraction between a pair of spherical macroions in the presence of added salt ions for the conditions where the interacting macroion pair is not affected by any other macroions that may be in the solution. This attractive force follows from the internal-energy contribution of counterion mediation. Contrary to conventional expectations, for charged macroions in an electrolyte solution, the entropic force is repulsive at most solution conditions because of localization of small ions in the vicinity of macroions. Both Derjaguin–Landau–Verwey–Overbeek theory and Sogami–Ise theory fail to describe the attractive interactions found in our simulations; the former predicts only repulsive interaction and the latter predicts a long-range attraction that is too weak and occurs at macroion separations that are too large. Our simulations provide fundamental “data” toward an improved theory for the potential of mean force as required for optimum design of new materials including those containing nanoparticles.

Performance of TerraSAR-X for urban subsidence monitoring: Murcia case study

This paper presents an analysis of the performance of TerraSAR-X for subsidence monitoring in urban areas. The city of Murcia has been selected as a test-site due to its high deformation rate and the set of extensometers deployed along the city that provide validation data. The obtained results have been compared with those obtained from ERS/ENVISAT data belonging to the same period and validated with the in-situ measurements.

Energy consumption in an urban wastewater treatment plant: the case of Murcia Region (Spain)

Of all the costs associated with the operation and maintenance of wastewater treatment plants (WWTPs), those associated with energy use tend to be the most significant. From this point of view, it is hence logical that energy efficiency and saving strategies should be one of the current focuses of debate amongst those involved with the management of WWTPs. The present study's objective is to determine the correlation between size and energy consumption for a WWTP. To this end, 90 WWTPs currently in service were analysed and their energetic impact quantified in terms of kWh/m3 of water treated. The results obtained demonstrate that energy consumption ratio increases as the size of WWTPs decreases, either in terms of treatment volume or population equivalent served.

X lberoamerican Conference on Phase Equilibria and Fluid Properties for Process Design (EQUIFASE): June 28-July 1, 2015 - Alicante (Spain): Book of Abstracts

The general purpose of the EQUIFASE Conference is to promote the Scientific and Technologic exchange between people from both the academic and the industrial environment in the field of Phase Equilibria and Thermodynamic Properties for the Design of Chemical Processes. Topics: Measurement of Thermodynamic Properties. Phase Equilibria and Chemical Equilibria. Theory and Modelling. Alternative Solvents. Supercritical Fluids. Ionic Liquids. Energy. Gas and oil. Petrochemicals. Environment and sustainability. Biomolecules and Biotechnology. Product and Process Design. Databases and Software. Education.

The relevance of harmonising the technical level of social housing with the urban level of the neighbourhood through the example of the 500 dwellings in Albacete

The Architecture and Household Trade Union built nearly 2,000 subsidized dwellings in Albacete from 1941 to 1971. It was the responsible entity from the end of the Civil War until the beginning of Democracy of the social policy programs in Spain. Later on, and together with the National Housing Institute, were responsible for the construction activity. Its limited budget, scarcity of technical and human resources and an urgent need for new housing developments, constituted the basis for producing a vast housing market of low construction qualities. However, thanks to the true architectonic expertise of some of the professionals, some of the developments were designed with a clear urban strategy and in direct relation with the city, which characterizes them to be studied and conserved. This is the case for the selected development for the analysis, the urban complex of the 500 dwellings in Albacete, the Hermanos Falcó Neighborhood. Designed and built between 1963, Alfonso Crespo and Adolfo Gil architects, and 1977 second reformed project by the architect Fernando Rodríguez. It is characterized by its layout on the territory, its controlled relation with the city and its different types of open blocks. Above all, its spatial and human scale strengths, directly related to the European post-war proposals, have to be emphasized; although its technical deficiencies affect the interior quality of the houses. This paper examines its virtues and failures and proposes, using current tools, its renovation. This proposal main aims are to extend its lifetime and develop the particular and urban sustainability levels.

Smart Monitoring Embedded Service for Energy-Efficient and Sustainable Management in Data Centers

Information technologies (IT) currently represent 2% of CO2 emissions. In recent years, a wide variety of IT solutions have been proposed, focused on increasing the energy efficiency of network data centers. Monitoring is one of the fundamental pillars of these systems, providing the information necessary for adequate decision making. However, today’s monitoring systems (MSs) are partial, specific and highly coupled solutions. This study proposes a model for monitoring data centers that serves as a basis for energy saving systems, offered as a value-added service embedded in a device with low cost and power consumption. The proposal is general in nature, comprehensive, scalable and focused on heterogeneous environments, and it allows quick adaptation to the needs of changing and dynamic environments. Further, a prototype of the system has been implemented in several devices, which has allowed validation of the proposal in addition to identification of the minimum hardware profile required to support the model.

Co-design: setting relational domains for deep sustainability

This paper draws mainly on the work of Elizabeth Sanders who has being practising, thinking and mapping participatory design research for over 25 years, connecting it to insights from Maturana (1984), Capra (2002), Jovchelovitch (1995, 2000, 2007) and Preece (2011), to propose that the process of design per se is a relational domain of cocreativity that is essential to construct a way toward deeper sustainability.

THE DESIGN OF A POWER SYSTEM FOR A WIRELESS SENSOR NETWORK FOR LONG-TERM OPERATION

Wireless sensor networks (WSNs) have shown wide applicability to many fields including monitoring of environmental, civil, and industrial settings. WSNs however are resource constrained by many competing factors that span their hardware, software, and networking. One of the central resource constrains is the charge consumption of WSN nodes. With finite energy supplies, low charge consumption is needed to ensure long lifetimes and success of WSNs. This thesis details the design of a power system to support long-term operation of WSNs. The power system’s development occurs in parallel with a custom WSN from the Queen’s MEMS Lab (QML-WSN), with the goal of supporting a 1+ year lifetime without sacrificing functionality. The final power system design utilizes a TPS62740 DC-DC converter with AA alkaline batteries to efficiently supply the nodes while providing battery monitoring functionality and an expansion slot for future development. Testing tools for measuring current draw and charge consumption were created along with analysis and processing software. Through their use charge consumption of the power system was drastically lowered and issues in QML-WSN were identified and resolved including the proper shutdown of accelerometers, and incorrect microcontroller unit (MCU) power pin connection. Controlled current profiling revealed unexpected behaviour of nodes and detailed current-voltage relationships. These relationships were utilized with a lifetime projection model to estimate a lifetime between 521-551 days, depending on the mode of operation. The power system and QML-WSN were tested over a long term trial lasting 272+ days in an industrial testbed to monitor an air compressor pump. Environmental factors were found to influence the behaviour of nodes leading to increased charge consumption, while a node in an office setting was still operating at the conclusion of the trail. This agrees with the lifetime projection and gives a strong indication that a 1+ year lifetime is achievable. Additionally, a light-weight charge consumption model was developed which allows charge consumption information of nodes in a distributed WSN to be monitored. This model was tested in a laboratory setting demonstrating +95% accuracy for high packet reception rate WSNs across varying data rates, battery supply capacities, and runtimes up to full battery depletion.