Physiological demands of competitive elite cross-country skiing

Introduction Researchers have, for decades, contributed to an increased collective understanding of the physiological demands in cross-country skiing; however, almost all of these studies have used either non-elite subjects and/or performances that emulate cross-country skiing. To establish the physiological demands of cross-country skiing, it is important to relate the investigated physiological variables to the competitive performance of elite skiers. The overall aim of this doctoral thesis was, therefore, to investigate the external validity of physiological test variables to determine the physiological demands in competitive elite cross-country skiing. Methods The subjects in Study I – IV were elite male (I – III) and female (III – IV) cross-country skiers. In all studies, the relationship between test variables (general and ski-specific) and competitive performances (i.e. the results from competitions or the overall ski-ranking points of the International Ski Federation (FIS) for sprint (FISsprint) and distance (FISdist) races) were analysed. Test variables reflecting the subject’s general strength, upper-body and whole-body oxygen uptake, oxygen uptake and work intensity at the lactate threshold, mean upper-body power, lean mass, and maximal double-poling speed were investigated. Results The ability to maintain a high work rate without accumulating lactate is an indicator of distance performance, independent of sex (I, IV). Independent of sex, high oxygen uptake in whole-body and upper-body exercise was important for both sprint (II, IV) and distance (I, IV) performance. The maximal double-poling speed and 60-s double-poling mean power output were indicators of sprint (IV) and distance performance (I), respectively. Lean mass was correlated with distance performance for women (III), whereas correlations were found between lean mass and sprint performance among both male and female skiers (III). Moreover, no correlations between distance performance and test variables were derived from tests of knee-extension peak torque, vertical jumps, or double poling on a ski-ergometer with 20-s and 360-s durations (I), whereas gross efficiency while treadmill roller skiing showed no correlation with either distance or sprint performance in cross-country skiing (IV). Conclusion The results in this thesis show that, depending on discipline and sex, maximal and peak oxygen uptake, work intensity at the lactate threshold, lean mass, double-poling mean power output, and double-poling maximal speed are all externally valid physiological test variables for evaluation of performance capability among elite cross-country skiers; however, to optimally indicate performance capability different test-variable expressions should be used; in general, the absolute expression appears to be a better indicator of competitive sprint performance whereas the influence of body mass should be considered when evaluating competitive distance performance capability of elite cross-country skiers.

English-medium instruction in Sweden : Perspectives and practices in two upper secondary schools

This thesis presents English-medium instruction (EMI) in the Swedish context, focusing on perspectives and practices in two schools. The research question is as follows: How and why is EMI offered, chosen, and practiced in the Swedish upper secondary school today? The aim is to explore the status of the educational option, the reasons for offering EMI to stakeholders, the stakeholders’ beliefs about and goals of EMI, and the implementation of EMI in the classroom. A survey of all upper secondary schools in Sweden was conducted to ascertain the spread of content teaching through a foreign language. The educational context was studied from an ecological perspective using methods based in linguistic ethnography. Language alternation, academic language, and language hierarchy were all considered. Interviews were analysed for content; and classroom language use was analysed for language choice and function. The concepts of affordance and scaffolding together with translanguaging were key. The de facto policies of the micro contexts of the schools were examined in light of the declared national policy of the macro context of Sweden. The results indicate that the option in Swedish schools has not increased, and also tends to only be EMI—not Content and Language Integrated Learning (CLIL) or instruction through other languages. EMI is offered for prestige, an international profile, marketing potential and personal interest. EMI students are academically motivated and confident, and see the option as “fun”. 100% EMI in the lessons is not the goal or the practice. Translanguaging is abundant, but how language alternation is perceived as an affordance or not differs in the two schools. One focuses on how the languages are used while the other focuses on how much each language is used. In conclusion, the analysis suggests that a development of definitions and practices of EMI in Sweden is needed, especially in relation to language policy and language hierarchy.

Optimal V. O2max-to-mass ratio for predicting 15 km performance among elite male cross-country skiers

The aim of this study was 1) to validate the 0.5 body-mass exponent for maximal oxygen uptake (V. O2max) as the optimal predictor of performance in a 15 km classical-technique skiing competition among elite male cross-country skiers and 2) to evaluate the influence of distance covered on the body-mass exponent for V. O2max among elite male skiers. Twenty-four elite male skiers (age: 21.4±3.3 years [mean ± standard deviation]) completed an incremental treadmill roller-skiing test to determine their V. O2max. Performance data were collected from a 15 km classicaltechnique cross-country skiing competition performed on a 5 km course. Power-function modeling (ie, an allometric scaling approach) was used to establish the optimal body-mass exponent for V . O2max to predict the skiing performance. The optimal power-function models were found to be race speed = 8.83⋅(V . O2max m-0.53) 0.66 and lap speed = 5.89⋅(V . O2max m-(0.49+0.018lap)) 0.43e0.010age, which explained 69% and 81% of the variance in skiing speed, respectively. All the variables contributed to the models. Based on the validation results, it may be recommended that V. O2max divided by the square root of body mass (mL⋅min−1 ⋅kg−0.5) should be used when elite male skiers’ performance capability in 15 km classical-technique races is evaluated. Moreover, the body-mass exponent for V . O2max was demonstrated to be influenced by the distance covered, indicating that heavier skiers have a more pronounced positive pacing profile (ie, race speed gradually decreasing throughout the race) compared to that of lighter skiers.

Om lärarskapets moraliska dimension : ett perspektiv och en studie av lärarstuderandes nätbaserade seminariesamtal

In this dissertation, an educational perspective called the moral dimension of teaching is developed. The work includes a theoretically informed discussion from a pragmatist point of view in which the concept of pedagogical rhythm is introduced. The concept captures the need for teachers to regularly shift their intentions and occasionally act in contradictory ways as a consequence of the moral which emerges from interaction in pedagogical situations. Using this perspective, criteria are developed for the characteristics of discussions of the work of teachers, which are desirable in order for students in pre-service teacher education to have opportunities to develop their teachership. Secondly, the educational perspective as it is conceptualised serves as a theoretical framework for a study of discussions taking place in net-based seminars among students in teacher education. The study consists of 14 recorded seminars in which discussions of the work of teachers are analysed in terms of content and direction for reflection. The result of the analysis is a construction of four different focal points for processes of making judgements: existential, performative, critical and professional. Mainly the performative, and to some extent the critical, focal points appear to be supported by the net-based environment, although potential for the professional focal point is found when available tools in net-based settings are used in deliberate ways. Finally, based on these four focal points, possible future predispositions among student teachers are deliberated. Student teachers’ future opportunities to develop a moral and epistemological authority are discussed, as well as teachers’ general opportunities to exercise professional responsibility. The conclusion emphasises that a perspective such as the one developed in the dissertation is important, as it creates an understanding for the need to educate student teachers to exercise a form of responsibility that goes beyond being accountable to society.

The relative perceptual weight of two Swedish prosodic contrasts

Abstract. In addition to 9 vowel and 18 consonant phonemes, Swedish has three prosodic phonemic contrasts: word stress, quantity and tonal word accent. There are also examples of distinctive phrase or sentence stress, where a verb can be followed by either an unstressed preposition or a stressed particle. This study focuses on word level and more specifically on word stress and tonal word accent in disyllabic words. When making curriculums for second language learners, teachers are helped by knowing which phonetic or phonological features are more or less crucial for the intelligibility of speech and there are some structural and anecdotal evidence that word stress should play a more important role for intelligibility of Swedish, than the tonal word accent. The Swedish word stress is about prominence contrasts between syllables, mainly signaled by syllable duration, while the tonal word accent is signaled mainly by pitch contour. The word stress contrast, as in armen [´arːmən] ‘the arm’ - armén [ar´meːn] ‘the army’, the first word trochaic and the second iambic, is present in all regional varieties of Swedish, and realized with roughly the same acoustic cues, while the tonal word accent, as in anden [´anːdən] ‘the duck’ - anden [`anːdən] ‘the spirit’ is absent in some dialects (as well as in singing), and also signaled with a variety of tonal patterns depending on region. The present study aims at comparing the respective perceptual weight of the two mentioned contrasts. Two lexical decision tests were carried out where in total 34 native Swedish listeners should decide whether a stimulus was a real word or a non-word. Real words of all mentioned categories were mixed with nonsense words and words that were mispronounced with opposite stress pattern or opposite tonal word accent category. The results show that distorted word stress caused more non-word judgments and more loss, than distorted word accent. Our conclusion is that intelligibility of Swedish is more sensitive to distorted word stress pattern than to distorted tonal word accent pattern. This is in compliance with the structural arguments presented above, and also with our own intuition.

Dokumentationens dilemman : Förskollärare samtalar om pedagogisk dokumentation

Abstract  Pedagogical documentation is a certain procedure for documenting that, in recent years, has been embraced in several Swedish preschools. Teachers document children’s actions and conversations usually by photos or video recordings. This documentation is to be used for a pedagogical purpose. However, studies and governmental inspections have shown that pedagogical documentation gives rise to many questions among preschool teachers. The purpose of this study is to gain insight into what is being expressed when preschool teachers discuss pedagogical documentation, focusing on themes of content and on the participants’ expressions of their points of view. The data is comprised of transcriptions from audio recordings of discussions conducted in a research circle. The participants are eight preschool teachers that met over the course of one year. Each meeting focused on the documentation provided by a different participant. In that way the contents of the discussions were framed by the teachers own questions and narratives. Theoretically, the study departs from Social Constructionism and Discursive Psychology. The preschool teachers’ utterances have been analyzed using concepts of interpretative repertoires and ideological dilemmas. The results show the main themes to be: Knowledge content in a preschool setting, children’s learning, the teacher’s role and implementation of pedagogical documentation. The participants’ joint position is that the knowledge content at the preschool level is defined by the curriculum for the preschool. Concerning children’s learning and the teacher’s role, two main standpoints are disclosed. Ideologically those standpoints derive from two opposing theories of education. Based on how the standpoints have been expressed I have called them ”predetermined learning” versus ”non-predetermined learning”. One main distinction between the standpoints is that predetermined learning emphasizes the results of learning, while non-predetermined learning emphasizes the processes of learning. The participants’ utterances show that teachers tend to subscribe to the idea that there is only one acceptable way of working with pedagogical documentation. This sometimes creates performance anxiety and feelings of not succeeding and has led to arguments advocating an alternate approach; pedagogical documentation can be done in many ways. The ideological dilemmas within the discourse can be perceived as resources by which the participants argue about knowledge, learning, teaching and about the implementation of pedagogical documentation.

Hjælp til selvcensur

Self-help and self-censorship: A self-help cultural perspective on organizational silence This paper seeks to explain silence in the workplace through an analytical perspective derived from Judith Butlers work on censorship, and in this way suggest an alternative to explanations in the existing literature on employee silence, which are often tied to the actions and motivations of the individual subject. It is thus argued that self-help books can be seen as indicative of a pervasive culture of self-improvement, which among other things promotes the absence of criticism in the workplace. The empirical point of departure for this argument is the two bestselling self-help books The secret by Rhonda Byrne and The 7 habits of highly effective people by Stephen Covey. Theoretically, the paper applies Butlers notion of ”implicit censorship” where censorship is understood as productive in the sense of being constitutive of language. Hence, in the analysis it is shown how discursive regimes in self-help literature tend to be constructed in such a way, that explicit criticism cannot emerge as a meaningful activity, and is thus implicitly censored.

Krönika : Den akademiska etiken och entreprenörhögskolans anda

Sociologisk Forsknings digitala arkiv

Development, capabilities and technology : an evaluative framework

In this paper we present a framework to be used for evaluation of Information and Communication Technology for Development (ICT4D) projects. The framework is based on Sen´s notion of development as freedom where human capabilities and functionings are seen as key aspects to development. Sen´s capability approach presents an alternative way of seeing and evaluating development (alternative to more traditional ways of measuring development). The approach is based on expanding freedoms, or eliminating unfreedoms, for people so that they can live a life that they have reason to value. Even though Sen is referenced a lot in ICT4D literature the analysis rarely goes further then stating that Sen presents an alternative to traditional ways of development. Reasons can be that the capability approach does not specifically mention technology, in addition to the lack of guidelines presented by Sen on how to use the framework. The aim of this paper is to operationalize the evaluation process and to include a clear role for technology in Sen´s capability framework. The framework is validated with a case on distance education from Bangladesh. 

Capability outcomes from educational and ICT capability inputs : an analysis of ICT use in informal education in Kenya

In the field of Information and Communication Technologies for Development (ICT4D) ICT use in education is well studied. Education is often seen as a pre-requisite for development and ICTs are believed to aid in education, e.g. to make it more accessible and to increase its quality. In this paper we study the access and use of ICT in a study circle (SC) education program in the south coast of Kenya. The study is qualitative reporting results based on interviews and observations with SC participants, government officers and SC coordinators and teachers. The study builds on the capability approach perspective of development where individuals’ opportunities and ability to live a life that they value are focused. The aim of the study is to investigate the capability outcomes enabled through the capability inputs access and use of ICT in education as well as the factors that enabled and/or restricted the outcomes. Findings show that many opportunities have been enabled such as an increase in the ability to generate an income, learning benefits, community development and basic human development (e.g. literacy and self-confidence). However, conversion factors such as a poorly developed infrastructure and poor IT literacy prevent many of the individuals from taking full advantage of the ICT and the opportunities it enables. 

Role of headmasters, teachers and supervisors in knowledge transfer about occupational health and safety to pupils in vocational education

Background Young people are at an increased risk for illness in working life. The authorities stipulate certain goals for training in occupational health and safety (OHS) in vocational schools. A previous study concluded that pupils in vocational education had limited knowledge in the prevention of health risks at work. The aim of the current study, therefore, was to study how OHS training is organized in school and in workplace-based learning (WPL).   Method The study design featured a qualitative approach, which included interviews with 12 headmasters, 20 teachers, and 20 supervisors at companies in which the pupils had their WPL. The study was conducted at 10 upper secondary schools, located in Central Sweden, that were graduating pupils in four vocational programs.   Result The interviews with headmasters, teachers, and supervisors indicate a staggered picture of how pupils are prepared for safe work. The headmasters generally give teachers the responsibility for how goals should be reached. Teaching is very much based on risk factors that are present in the workshops and on teachers’ own experiences and knowledge. The teaching during WPL also lacks the systematic training in OHS as well as in the traditional classroom environment.   Conclusion Teachers and supervisors did not plan the training in OHS in accordance with the provisions of systematic work environment management. Instead, the teachers based the training on their own experiences. Most of the supervisors did not get information from the schools as to what should be included when introducing OHS issues in WPL.

Validity and responsiveness of at-home touch-screen assessments in advanced Parkinson's disease

The aim of this study was to investigate if a telemetry test battery can be used to measure effects of Parkinson’s disease (PD) treatment intervention and disease progression in patients with fluctuations. Sixty-five patients diagnosed with advanced PD were recruited in an open longitudinal 36-month study; 35 treated with levodopa-carbidopa intestinal gel (LCIG) and 30 were candidates for switching from oral PD treatment to LCIG. They utilized a test battery, consisting of self-assessments of symptoms and fine motor tests (tapping and spiral drawings), four times per day in their homes during week-long test periods. The repeated measurements were summarized into an overall test score (OTS) to represent the global condition of the patient during a test period. Clinical assessments included ratings on Unified PD Rating Scale (UPDRS) and 39-item PD Questionnaire (PDQ-39) scales. In LCIG-naïve patients, mean OTS compared to baseline was significantly improved from the first test period on LCIG treatment until month 24. In LCIG-non-naïve patients, there were no significant changes in mean OTS until month 36. The OTS correlated adequately with total UPDRS (rho = 0.59) and total PDQ-39 (0.59). Responsiveness measured as effect size was 0.696 and 0.536 for OTS and UPDRS respectively. The trends of the test scores were similar to the trends of clinical rating scores but dropout rate was high. Correlations between OTS and clinical rating scales were adequate indicating that the test battery contains important elements of the information of well-established scales. The responsiveness and reproducibility were better for OTS than for total UPDRS.

Wear of coated and uncoated PCBN cutting tool used in turning and milling

This licentiate thesis has the main focus on evaluation of the wear of coated and uncoated polycrystalline cubic boron nitride cutting tool used in cutting operations against hardened steel. And to exam the surface finish and integrity of the work material used. Harder work material, higher cutting speed and cost reductions result in the development of harder and more wear resistance cutting tools. Although PCBN cutting tools have been used in over 30 years, little work have been done on PVD coated PCBN cutting tools. Therefore hard turning and hard milling experiments with PVD coated and uncoated cutting tools have been performed and evaluated. The coatings used in the present study are TiSiN and TiAlN. The wear scar and surface integrity have been examined with help of several different characterization techniques, for example scanning electron microscopy and Auger electron spectroscopy.   The results showed that the PCBN cutting tools used displayed crater wear, flank wear and edge micro chipping. While the influence of the coating on the crater and flank wear was very small and the coating showed a high tendency to spalling. Scratch testing of coated PCBN showed that, the TiAlN coating resulted in major adhesive fractures. This displays the importance of understanding the effect of different types of lapping/grinding processes in the pre-treatment of hard and super hard substrate materials and the amount and type of damage that they can create. For the cutting tools used in turning, patches of a adhered layer, mainly consisting of FexOy were shown at both the crater and flank. And for the cutting tools used in milling a tribofilm consisting of SixOy covered the crater. A combination of tribochemical reactions, adhesive wear and mild abrasive wear is believed to control the flank and crater wear of the PCBN cutting tools. On a microscopic scale the difference phases of the PCBN cutting tool used in turning showed different wear characteristics. The machined surface of the work material showed a smooth surface with a Ra-value in the range of 100-200 nm for the turned surface and 100-150 nm for the milled surface. With increasing crater and flank wear in combination with edge chipping the machined surface becomes rougher and showed a higher Ra-value. For the cutting tools used in milling the tendency to micro edge chipping was significant higher when milling the tools steels showing a higher hard phase content and a lower heat conductivity resulting in higher mechanical and thermal stresses at the cutting edge.

Radiation properties of coil-coated steel in building envelope surfaces and the influence on building thermal performance

Recent studies have shown that the optical properties of building exterior surfaces are important in terms of energy use and thermal comfort. While the majority of the studies are related to exterior surfaces, the radiation properties of interior surfaces are less thoroughly investigated. Development in the coil-coating industries has now made it possible to allocate different optical properties for both exterior and interior surfaces of steel-clad buildings. The aim of this thesis is to investigate the influence of surface radiation properties with the focus on the thermal emittance of the interior surfaces, the modeling approaches and their consequences in the context of the building energy performance and indoor thermal environment. The study consists of both numerical and experimental investigations. The experimental investigations include parallel field measurements on three similar test cabins with different interior and exterior surface radiation properties in Borlänge, Sweden, and two ice rink arenas with normal and low emissive ceiling in Luleå, Sweden. The numerical methods include comparative simulations by the use of dynamic heat flux models, Building Energy Simulation (BES), Computational Fluid Dynamics (CFD) and a coupled model for BES and CFD. Several parametric studies and thermal performance analyses were carried out in combination with the different numerical methods. The parallel field measurements on the test cabins include the air, surface and radiation temperatures and energy use during passive and active (heating and cooling) measurements. Both measurement and comparative simulation results indicate an improvement in the indoor thermal environment when the interior surfaces have low emittance. In the ice rink arenas, surface and radiation temperature measurements indicate a considerable reduction in the ceiling-to-ice radiation by the use of low emittance surfaces, in agreement with a ceiling-toice radiation model using schematic dynamic heat flux calculations. The measurements in the test cabins indicate that the use of low emittance surfaces can increase the vertical indoor air temperature gradients depending on the time of day and outdoor conditions. This is in agreement with the transient CFD simulations having the boundary condition assigned on the exterior surfaces. The sensitivity analyses have been performed under different outdoor conditions and surface thermal radiation properties. The spatially resolved simulations indicate an increase in the air and surface temperature gradients by the use of low emittance coatings. This can allow for lower air temperature at the occupied zone during the summer. The combined effect of interior and exterior reflective coatings in terms of energy use has been investigated by the use of building energy simulation for different climates and internal heat loads. The results indicate possible energy savings by the smart choice of optical properties on interior and exterior surfaces of the building. Overall, it is concluded that the interior reflective coatings can contribute to building energy savings and improvement of the indoor thermal environment. This can be numerically investigated by the choice of appropriate models with respect to the level of detail and computational load. This thesis includes comparative simulations at different levels of detail.