Fabrication of disposable voltammetric electronic tongues by using Prussian Blue films electrodeposited onto CD-R gold surfaces and recognition of milk adulteration

A new approach to fabricate a disposable electronic tongue is reported. The fabrication of the disposable sensor aimed the integration of all electrodes necessary for measurement in the same device. The disposable device was constructed with gold CD-R and copper sheets substrates and the sensing elements were gold, copper and a gold surface modified with a layer of Prussian Blue. The relative standard deviation for signals obtained from 20 different disposable gold and 10 different disposable copper electrodes was below 3.5%. The performance, electrode materials and the capability of the device to differentiate samples were evaluated for taste substances model, milk with different pasteurization processes (homogenized/pasteurized, ultra high temperature (UHT) pasteurized and UHT pasteurized with low fat content) and adulterated with hydrogen peroxide. In all analysed cases, a good separation between different samples was noticed in the score plots obtained from the principal component analysis (PCA). Crown Copyright (C) 2008 Published by Elsevier B.V. All rights reserved.

Photocatalytic degradation of methylene blue by TiO(2)-Cu thin films: Theoretical and experimental study

In this work the effect of doping concentration and depth profile of Cu atoms on the photocatalytic and surface properties of TiO(2) films were studied. TiO(2) films of about 200 nn thickness were deposited on glass substrates on which a thin Cu layer (5 nm) was deposited. The films were annealed during 1 s to 100 degrees C and 400 degrees C, followed by chemical etching of the Cu film. The grazing incidence X-ray fluorescence measurements showed a thermal induced migration of Cu atoms to depths between 7 and 31 nm. The X-ray photoelectron spectroscopy analysis detected the presence of TiO(2), Cu(2)O and Cu(0) phases and an increasing Cu content with the annealing temperature. The change of the surface properties was monitored by the increasing red-shift and absorption of the ultraviolet-visible spectra. Contact angle measurements revealed the formation of a highly hydrophilic surface for the film having a medium Cu concentration. For this sample photocatalytic assays, performed by methylene blue discoloration, show the highest activity. The proposed mechanism of the catalytic effect, taking place on Ti/Cu sites, is supported by results obtained by theoretical calculations. (C) 2010 Elsevier B.V. All rights reserved.

Photocatalyst TiO(2)-Co: the effect of doping depth profile on methylene blue degradation

In this work, we study the effect of doping depth profile on the photocatalytic and surface properties of TiO(2) films. Two thin film layers of TiO(2) (200 nm) and Co (5 nm), respectively, were deposited by physical evaporation on glass substrate. These films were annealed for 1 s at 100 and 400 A degrees C and the Co layer was removed by chemical etching. Atomic force microscopy (AFM) phase images showed changes in the surface in function of thermal treatment. The grazing-incidence X-ray fluorescence (GIXRF) measurements indicated that the thermal treatment caused migration of Co atoms to below the surface, the depths found were between 19 and 29 nm. The contact angle showed distinct values in function of the doped profile or Co surface concentration. The UV-vis spectra presented a red shift with the increasing of thermal treatment. Photocatalytical assays were performed by methylene blue discoloration and the higher activity was found for TiO(2)-Co treated at 400 A degrees C, the ESI-MS showed the fragments formed during the methylene blue decomposition.

Photocatalytic decomposition of methylene blue via Fenton mechanisms by silicon wafer doped with Au and Cu: a theoretical and experimental study

In this work, we studied the photocatalytic and the structural aspects of silicon wafers doped with Au and Cu submitted to thermal treatment. The materials were obtained by deposition of metals on Si using the sputtering method followed by fast heating method. The photocatalyst materials were characterized by synchrotron-grazing incidence X-ray fluorescence, ultraviolet-visible spectroscopy, X-ray diffraction, and assays of H(2)O(2) degradation. The doping process decreases the optical band gap of materials and the doping with Au causes structural changes. The best photocatalytic activity was found for thermally treated material doped with Au. Theoretical calculations at density functional theory level are in agreement with the experimental data.

Determination of Thermal and Blue Light Photochemical Hazard Protection needed by Automatic Welding filters

Recent developments in biological research, has shown that the initial maximum permissible exposure (MPE) limits for protection of workers from risks associated with artificial optical radiations were more stringent than needed. Using the most recent MPE limits for artificial optical radiation this piece of work was focused on the investigation of the level of visible light attenuation needed by automatic welding filters in case of switching failure. Results from the comparison of different exposure standards were employed in investigating the need of Vis/IR and blue light transmittance requirement for automatic welding filters. Real and arbitrary spectra were taken into consideration for the worst and best case scenarios of artificial optical radiations. An excel worksheet developed during the execution of this project took into consideration the exposure from different light sources and the precision of the spectrometer used in measuring the transmittances of a welding filter. The worksheet was developed and tested with known product properties to investigate the validity of its formulation. The conclusion drawn from this project was that attenuation in the light state will be needed for products with the darkest state shade 11 or higher. Also shown is that current welding filter protects the eye well enough even in the case of switching failure.

Metodologia de análise de dioxinas em cinzas obtidas da incineração de couro Wet-Blue

O presente trabalho trata da validação de uma metodologia de análise para a determinação de dibenzo-p-dioxinas policloradas (PCDDs) em cinzas obtidas através de um processo de incineração de aparas de couro wet-blue. As dioxinas, compostos de extrema toxicidade, podem ser formadas na superfície das partículas de cinzas em reações de combustão. O mecanismo de formação de PCDDs requer uma atmosfera rica em oxigênio, uma fonte de cloro e a presença na cinza de um metal capaz de catalizar uma reação Deacon. O couro wet-blue apresenta em sua composição os precursores para a formação de dioxinas tais como o cloro e o metal catalisador sódio, cuja presença destes elementos foi comprovada por análises de superfície realizadas no couro e nas cinzas usando as técnicas de Rutherford Back-scattering Spectrometry (RBS) e Microscopia Eletrônica de Varredura (MEV). Desta forma, torna-se necessária a análise de dioxinas em cinzas de couro para especificar seu tratamento e destino final. As cinzas de couro foram obtidas numa unidade de bancada de incineração com reator de leito fixo, processo conhecido como GCC (Gaseificação e Combustão Combinadas). A metodologia utilizada para analisar dioxinas nas cinzas de couro foi baseada no Método 8280B da Agência de Proteção Ambiental dos Estados Unidos da América (EPA-USA). Este método descreve os procedimentos de extração de matrizes específicas, o clean-up para os analitos específicos e a determinação de dioxinas através das técnicas de cromatografia gasosa de alta resolução e espectrometria de massa de baixa resolução. O sucesso da análise depende da preparação dos extratos das amostras, etapa conhecida como clean-up, a qual é descrita minuciosamente neste trabalho, incluindo a montagem das colunas cromatográficas. A eficiência de extração das dioxinas foi obtida com os resultados comparativos das análises entre matrizes contaminadas com solução padrão de dioxinas e o padrão analítico. A validação deste método para análise de dioxinas policloradas em cinzas de couro wet-blue foi considerada satisfatória para os objetivos do trabalho, uma vez que a eficiência de extração de dioxinas obtida ficou dentro dos critérios estabelecidos pelo método.

Determinação das espécies de cromo nas cinzas da incineração de couro wet-blue em reatores de leito fixo e leito fluidizado

Este trabalho tem como objetivo a determinação quantitativa da concentração de cromo (III, VI e total) nas cinzas de serragem de couro wet-blue, incineradas em reatores de leito fixo nas temperaturas de 450, 550 e 650 C e reator de leito fluidizado nas temperaturas de 730, 780, 830 e 850 C, verificando se estes resultados estão dentro dos limites permitidos pelas normas ambientais brasileiras e, consequentemente, se em relação à concentração de cromo, os processos de incineração utilizados são uma maneira adequada de promover a eliminação ambientalmente aceitável da serragem de couro wet-blue. Realizou-se, neste trabalho, o estudo dos procedimentos para digestão da amostra, dos métodos analíticos quantitativos para a determinação da concentração de cromo que constatou-se depender da valência a ser analisada. As determinações de cromo total e cromo hexavalente contido nas cinzas foram realizadas após digestão ácida e digestão alcalina da amostra, respectivamente. Após o processo de digestão o cromo total (na forma de Cr (VI)) e o cromo hexavalente foram determinados por dois métodos espectrofotométricos na forma de Cr (VI) em meio ácido com difenilcarbazida (DPC) e após redução na forma de Cr (III), complexado com EDTA. O cromo total também foi determinado por volumetria empregando o método titulométrico. Este método não foi empregado na determinação de cromo hexavalente devido aos baixos teores deste nas cinzas. O teor de Cr (III) foi obtido pela diferença entre o cromo total e cromo hexavalente Procedendo-se a análise estatística dos resultados de cromo hexavalente e total nas cinzas pelos diferentes técnicas analíticas, independente do tipo de incinerador, verificou-se que não há diferenças significativas entre os mesmos. Podendo, portanto, utilizar quaisquer uma das técnicas para avaliá-los. Comparando-se os resultados das análises obtidos na incineração da serragem de couro wet-blue em reator de leito fixo e reator de leito fluidizado em diferentes temperaturas, verificou-se que no reator de leito fixo o teor de Cr (VI) nas cinzas geradas foi muito baixa, praticamente inexistente; enquanto que no reator de leito fluidizado se a temperatura de combustão não for muito alta o teor de Cr (VI) ficará dentro dos limites aceitáveis. As cinzas provenientes de qualquer um dos processos de incineração analisadas, neste trabalho, tanto do reator de leito fixo como de leito fluidizado não é conveniente que seja descartada diretamente no solo. As mesmas devem ser aproveitadas na indústria de cerâmicos, ou mesmo em algum processo que visa recuperar o cromo.

M-PESA mobile money: a case study in Blue ocean strategy

The recent and widespread availability of affordable mobile phone technology in developing countries has paved the way for the development of a number of mobile money and electronic remittance services. One of the most successful of these services is Safaricom’s M-PESA program, launched in the East African nation of Kenya in March 2007. Since then, the program has successfully enrolled over 15.2 million users, transferred more than US$1.4 trillion in electronic funds, and contributed significantly to poverty alleviation and financial inclusion efforts in Kenya. M-Pesa is a mobile phone based money transfer system in Kenya which grew at a blistering pace following its inception in 2007. This case study will analyze the critical factors that make M-PESA such a unique success in Kenya specifically.

Feeding habits of the blue shark (Prionace glauca) off the coast of Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

DIET of THE BLUE MARLIN (MAKAIRA NIGRICANS, LACEPEDE 1802) (PERCIFORMES: ISTIOPHORIDAE) of THE SOUTHWESTERN EQUATORIAL ATLANTIC OCEAN.

Diet composition of the blue marlin, Makaira nigricans, from the southwestern equatorial Atlantic Ocean was analyzed between October 2004 and November 2005. In the 226 stomachs of fish ranging between 100 and 311 cm lower jaw -fork length (LJFL), 44 items were identified, including 31 fishes and 13 cephalopods. Seventy stomachs were empty (23.6 %). M. nigricans fed preferentially on heavy and muscular scombrid fishes especially upon the skipjack tuna, Katsuwonus pelamis (Linnaeus, 1758), probably to sustain their high metabolism, and on a variety of other items composed mainly by epipelagic species of fish and cephalopods.

Reproductive migration and population dynamics of the blue crab Callinectes danae in an estuary in southeastern Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

MYZOBDELLA PLATENSIS (HIRUNDINIDA: PISCICOLIDAE) IS TRUE PARASITE of BLUE CRABS (CRUSTACEA: PORTUNIDAE)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Protein requirements for Blue-fronted Amazon (Amazona aestiva) growth

The objective of this study was to evaluate the protein requirements for hand-rearing Blue-fronted Amazon parrots (Amazona aestiva). Forty hatchlings were fed semi-purified diets containing one of four (as-fed basis) protein levels: 13%, 18%, 23% and 28%. The experiment was carried out in a randomized block design with the initial weight of the nestling as the blocking factor and 10 parrots per protein level. Regression analysis was used to determine relationships between protein level and biometric measurements. The data indicated that 13% crude protein supported nestling growth with 18% being the minimum tested level required for maximum development. The optimal protein concentration for maximum weight gain was 24.4% (p = 0.08; r(2) = 0.25), tail length 23.7% (p = 0.09; r(2) = 0.19), wing length 23.0% (p = 0.07; r(2) = 0.17), tarsus length 21.3% (p = 0.06; r(2) = 0.10) and tarsus width 21.4% (p = 0.07; r(2) = 0.09). Tarsus measurements were larger in males (p < 0.05), indicating that sex must be considered when studying developing psittacines. These results were obtained using a highly digestible protein and a diet with moderate metabolizable energy levels.

Chlamydophila psittaci in free-living Blue-fronted Amazon parrots (Amazona aestiva) and Hyacinth macaws (Anodorhynchus hyacinthinus) in the Pantanal of Mato Grosso do Sul, Brazil

Chlamydophila psittaci (C. psittaci) infection was evaluated in 77 free-living nestlings of Blue-fronted Amazon parrots (Amazona aestiva) and Hyacinth macaws (Anodorhynchus hyacinthinus) in the Pantanal of Mato Grosso do Sul, Brazil. Tracheal and cloacal swab samples from 32 wild parrot and 45 macaw nestlings were submitted to semi-nested PCR, while serum samples were submitted to complement fixation test (CFT). Although all 32 Amazon parrot serum samples were negative by CFT, cloacal swabs from two birds were positive for Chlamydophila DNA by semi-nested PCR (6.3%); these positive birds were 32 and 45 days old. In macaws, tracheal and cloacal swabs were positive in 8.9% and 26.7% of the samples, respectively. Complement-fixing antibodies were detected in 4.8% of the macaw nestlings; macaw nestlings with positive findings were between 33 and 88 days old. These results indicate widespread dissemination of this pathogen in the two evaluated psittacine populations. No birds had clinical signs suggestive of chlamydiosis. To the best of our knowledge, this is the first report on C. psittaci in free-living Blue-fronted Amazon parrots and Hyacinth macaws in Brazil. (c) 2006 Elsevier B.V. All rights reserved.

Extração do corante reactive blue 19 utilizando tensoativo não iônico

The generation of effluent from the finishing process in textile industry is a serious environmental problem and turned into an object of study in several scientific papers. Contamination with dyes and the presences of substances that are toxic to the environment characterize this difficult treatment effluent. Several processes have already been evaluated to remove and even degrade such pollutants are examples: coagulation-flocculation, biological treatment and advanced oxidative processes, but not yet sufficient to enable the recovery of dye or at least of the recovery agent. An alternative to this problem is the cloud point extraction that involves the application of nonionic surfactants at temperatures above the cloud point, making the water a weak solvent to the surfactant, providing the agglomeration of those molecules around the dyes molecules by affinity with the organic phase. After that, the formation of two phases occurred: the diluted one, poor in dye and surfactant, and the other one, coacervate, with higher concentrations of dye and surfactants than the other one. The later use of the coacervate as a dye and surfactant recycle shows the technical and economic viability of this process. In this paper, the cloud point extraction is used to remove the dye Reactive Blue from the water, using nonionic surfactant nonyl phenol with 9,5 etoxilations. The aim is to solubilize the dye molecules in surfactant, varying the concentration and temperature to study its effects. Evaluating the dye concentration in dilute phase after extraction, it is possible to analyze thermodynamic variables, build Langmuir isotherms, determine the behavior of the coacervate volume for a surfactant concentration and temperature, the distribution coefficient and the dye removal efficiency. The concentration of surfactant proved itself to be crucial to the success of the treatment. The results of removal efficiency reached values of 91,38%, 90,69%, 89,58%, 87,22% and 84,18% to temperatures of 65,0, 67,5, 70,0, 72,5 and 75,0°C, respectively, showing that the cloud point extraction is an efficient alternative for the treatment of wastewater containing Reactive Blue