Un tutorial sobre blogs. El abecé del universo blog

Esta exposición pretende ser una introducción al estudio de un amplio, complejo y dinámico conjunto de nociones, técnicas y prácticas sociales, que gira en torno a la blogosfera, “un vigoroso subespacio de comunicación en Internet”, tal como lo denomina Sáez Vacas en esta misma revista. El objetivo no es tanto ser exhaustivo en el tratamiento, como dar a conocer al lector los distintos conceptos y fenómenos involucrados en la génesis de este peculiar universo, cuyo origen podemos situar en un metafórico Blog Bang. Hablaremos de los blogs (weblogs o bitácoras), su origen, caracterización, clasificación y cuantificación, de la tecnología que los rodea y de conceptos relacionados, tales como los wikis, el socialware, la blogocultura y la web semántica. This essay is designed as an introduction to the study of a broad, complex and dynamic set of notions, techniques and social practices revolving around the blogosphere –“an intense communication subspace on the Internet”, as defined by Saéz Vacas in this magazine. The aim of this article is not to exhaustively cover the topic, but rather, to introduce the reader to the different concepts and phenomena involved in the genesis of this peculiar universe, whose origin lies in the metaphoric Blog Bang. We will touch on blogs (weblogs and bitcores), their origin, nature, classification and quantification, the technology that surrounds them, and other related concepts like wikis, socialware, blogculture and web semantics.

Enhancing Interaction With Smart Objects Throught Mobile Devices

Interaction with smart objects can be accomplished with different technologies, such as tangible interfaces or touch computing, among others. Some of them require the object to be especially designed to be 'smart', and some other are limited in the variety and complexity of the possible actions. This paper describes a user-smart object interaction model and prototype based on the well known event-condition-action (ECA) reasoning, which can work, to a degree, independently of the intelligence embedded into the smart object. It has been designed for mobile devices to act as mediators between users and smart objects and provides an intuitive means for personalization of object's behavior. When the user is close to an object, this one publishes its 'event & action' capabilities to the user's device. The user may accept the object's module offering, which will enable him to configure and control that object, but also its actions with respect to other elements of the environment or the virtual world. The modular ECA interaction model facilitates the integration of different types of objects in a smart space, giving the user full control of their capabilities and facilitating creative mash-uping to build customized functionalities that combine physical and virtual actions

Learning curves of basic laparoscopic psychomotor skills in SINERGIA VR simulator

Purpose: Surgical simulators are currently essential within any laparoscopic training program because they provide a low-stakes, reproducible and reliable environment to acquire basic skills. The purpose of this study is to determine the training learning curve based on different metrics corresponding to five tasks included in SINERGIA laparoscopic virtual reality simulator. Methods: Thirty medical students without surgical experience participated in the study. Five tasks of SINERGIA were included: Coordination, Navigation, Navigation and touch, Accurate grasping and Coordinated pulling. Each participant was trained in SINERGIA. This training consisted of eight sessions (R1–R8) of the five mentioned tasks and was carried out in two consecutive days with four sessions per day. A statistical analysis was made, and the results of R1, R4 and R8 were pair-wise compared with Wilcoxon signed-rank test. Significance is considered at P value <0.005. Results: In total, 84.38% of the metrics provided by SINERGIA and included in this study show significant differences when comparing R1 and R8. Metrics are mostly improved in the first session of training (75.00% when R1 and R4 are compared vs. 37.50% when R4 and R8 are compared). In tasks Coordination and Navigation and touch, all metrics are improved. On the other hand, Navigation just improves 60% of the analyzed metrics. Most learning curves show an improvement with better results in the fulfillment of the different tasks. Conclusions: Learning curves of metrics that assess the basic psychomotor laparoscopic skills acquired in SINERGIA virtual reality simulator show a faster learning rate during the first part of the training. Nevertheless, eight repetitions of the tasks are not enough to acquire all psychomotor skills that can be trained in SINERGIA. Therefore, and based on these results together with previous works, SINERGIA could be used as training tool with a properly designed training program.

An attitude-based reasoning strategy to enhance interaction with augmented objects

This paper describes a mobile-based system to interact with objects in smart spaces, where the offer of resources may be extensive. The underlying idea is to use the augmentation capabilities of the mobile device to enable it as user-object mediator. In particular, the paper details how to build an attitude-based reasoning strategy that facilitates user-object interaction and resource filtering. The strategy prioritizes the available resources depending on the spatial history of the user, his real-time location and orientation and, finally, his active touch and focus interactions with the virtual overlay. The proposed reasoning method has been partially validated through a prototype that handles 2D and 3D visualization interfaces. This framework makes possible to develop in practice the IoT paradigm, augmenting the objects without physically modifying them.

Ensayos de laboratorio para la medida de la tasa de absorción específica (SAR) en dispositivos móviles

El proyecto trata del estudio de la tasa de absorción específica (SAR). En él se estudia la SAR que desprenden distintos dispositivos de comunicaciones inalámbricos. Se ha llevado a cabo en las instalaciones de la SETSI, en el laboratorio de radiofrecuencia situado en El Casar, Guadalajara, que pertenece al Ministerio de Industria Comercio y Turismo. La SAR es una relación entre la energía electromagnética acumulada en una masa de un material o tejido concreto. Por tanto, lo primero es definir la SAR, en la que se exponen sus parámetros. Además, se recogen los límites de exposición fijados por las normas internacionales IEC 62209-1 e IEC 62209-2 en relación a SAR. Posteriormente, acorde con las normas, se realiza una definición detallada de un banco de medidas de SAR, en donde se explica cada uno de los componentes del banco de manera detallada así como los sistemas que intervienen previamente a la realización de la medida, tipos de los sistemas para realizar las verificaciones pertinentes, y también las incertidumbres de ciertos parámetros. También se realiza un proceso completo de medida de SAR en el laboratorio de la SETSI, donde se realizan las comprobaciones necesarias para la realización de una serie de medidas sobre dispositivos de comunicaciones móviles. Éstas medidas se realizan primero sobre un teléfono móvil en las frecuencias de GSM, UMTS y WIFI, en las configuraciones estipuladas por la norma; “tocando” e “inclinada 15°” comparando los valores obtenidos con los límites marcados por las normas internacionales. Por último, en este apartado se realizan ciertas medidas con otras configuraciones que no están recogidas en la norma para intentar obtener los máximos valores de SAR posibles. Después se realiza una comparación entre dos dispositivos tipo “tablet”, para ello se realizan medidas en la banda de WIFI y se comentan los resultados obtenidos, relacionado con el diseño de cada uno de ellos. Posteriormente se realiza un presupuesto de un banco de SAR, donde se detallan todos los componentes que intervienen en la realización de las medidas de SAR, pero no se incluyen en él, los costes de mantenimiento o los costes relacionados con su uso. Por último se explican las conclusiones finales desprendidas de la realización de este proyecto de fin de carrera así como la bibliografía utilizada. ABTRACT This project consists on the study of the specific absorption rate (SAR).It studies the different SAR of several wireless communications devices. It has been held in SETSI’S facilities, in its radio frecuency laboratory located in El Casar, Guadalajara, which belongs to the Ministy of Industry, Trade and Tourism. The SAR is a ratio between the electromagnetic energy accumulated in a mass of concrete material or tissue. Therefore, the SAR is defined first, which sets its parameters. Also lists the exposure limits set by international standards IEC 62209-1 and IEC 62209-2 regarding SAR. Subsequently, according to the guidelines, performing a detailed definition of a SAR measures bench, which explains each of the components in detail of the bench and involved systems prior to the realization of the extent and types of systems to perform the necessary checks, and certain parameters uncertainties. Also performed a complete process for SAR in the SETSI laboratory, located in El Casar, Guadalajara, where the necessary checks are made to carry out a serie of measures on mobile communications devices. These will be carried out first on a mobile phone at frequencies of GSM, UMTS and WiFi, in the configurations set by the standard, "touch" and "tilt 15 °" comparing the values obtained with the limits set by international standards. Finally, this section will perform certain actions with other configurations that are not included in the standard to try to get the maximum possible SAR values. Then a comparison is made between two devices, such as "tablet", this will make measurements in the band WIFI and discussed the results, related to the design of each. Subsequently, a budget of a SAR bench, detailing all components involved in SAR measures, but not included in it, maintenance costs or the costs associated with its use. Finally conclusions are explained detached from the realization of this project as well as the bibliography used on it.

Dispersion relation for electron waves propagating in an isotropic plasma containing Maxwellian and suprathermal electrons

The paper discusses the dispersion relation for longitudinal electron waves propagating in a collisionless, homogeneous isotropic plasma, which contains both Maxwellian and suprathermal electrons. I t is found that the dispersion curve, known to have two separate branches for zero suprathermal energy spread,depends sensitively on this quantity. As the energy half-width of the suprathermal population increases, the branches approach each other until they touch at a connexion point, for a small critical value of that half-width. The topology of the dispersion curves is different for half-widths above and below critical; and this can affect the use of wave-propagation measurements as a diagnostic technique for the determination of the electron distribution function. Both the distance between the branches and spatial damping near the connexion frequency depend on the half-width, if below critical, and can be used to determine it. The theory is applied to experimental data.

Análisis de la influencia de la estimulación con vibraciones en la respuesta neuromuscular en competidores de esgrima

La esgrima es un deporte de combate en el que todas las acciones están dirigidas a conseguir el objetivo de la competición, que es el de tocar al contrario sin ser tocado, y para ello los tiradores/as se sirven de todas las herramientas, técnicas, tácticas y de condición física posibles a su alcance. La calidad de las acciones de los esgrimistas en competición dependerá fundamentalmente de dos de los sistemas involucrados en el proceso. Por un lado, la activación del sistema nervioso, y por otro lado la respuesta del sistema muscular. Una de las herramientas utilizadas en los últimos años para estimular el sistema neuromuscular, y que ha reportado en muchas investigaciones resultados positivos, ha sido la plataforma de vibraciones vertical. Por esto, decidimos llevar a cabo un estudio con deportistas de esgrima de competición con un protocolo de exposición aguda a las vibraciones, y medir el efecto producido por esta herramienta sobre el sistema neuromuscular a través del estudio de los cambios experimentados en los tiempos de reacción simple, tiempos de respuesta electiva y tiempos de movimiento, así como los efectos en la eficacia del tocado de esgrima analizados antes y después de recibir el estímulo vibratorio. El estudio se desarrolló con tiradores/as de competición de nivel nacional y pertenecientes al Centro de Tecnificación de la Federación de Esgrima de Castilla y León (n=38; Edad: 22 ±9,08). La muestra estaba compuesta por 12 mujeres y 26 hombres, de categorías, cadetes (13), júnior (12), y absolutos (13). El protocolo elegido fue realizado por cada participante en tres ocasiones, una inicial, otra tras pasar por una carga de estimulación en la plataforma de vibraciones, y una fase final, pasado un tiempo de recuperación de 10 minutos para comprobar el grado de disipación del efecto vibratorio. El estímulo elegido para la estimulación sobre la plataforma de vibraciones fue de una frecuencia de 50 Hz, durante un periodo de 60 segundos y con una amplitud de 4 mm. Los resultados se analizaron en función de las variables dependientes tiempo de reacción, tiempo de respuesta electiva, tiempo de movimiento, y precisión y eficacia. Estos datos se cruzaron con las variables independientes sexo, categoría, nivel deportivo y años de experiencia. El propósito del presente estudio fue el de analizar los efectos producidos por una intervención de estimulación neuromuscular mecánica en fase aguda en un grupo de tiradores/as de esgrima de competición. Los resultados mostraron que la carga de estimulación neuromuscular mecánica (ENM) aplicada en nuestro estudio provocó un discreto efecto en la respuesta neuromuscular de los tiradores participantes en la investigación. Se encontraron efectos significativos provocados por el estímulo vibratorio en las siguientes variables: en el tiempo de reacción simple se registró una mejora del 8,1%, en el tiempo de respuesta electiva a pie parado un 10%, en la precisión a pie parado un 7%, y en la eficacia a pie parado un 18,5%. Igualmente se observaron ligeras diferencias por sexos, encontrando un efecto de mayor tamaño en el grupo femenino. Es necesario resaltar que las características particulares de la muestra parecen haber influido en los resultados encontrados de forma importante. Por último, debemos destacar que el efecto residual producido por la estimulación aplicada en nuestra investigación en algún caso superó los diez minutos, ya que se hallaron efectos positivos de la estimulación neuromuscular mecánica en varios de los registros finales como hemos visto. ABSTRACT Fencing is a combat sport in which all actions are aimed at achieving the objective of the competition, which is that of touching the opponent without being touched and for this the fencers make use of all the tools, techniques, tactics and physical condition possible at their disposal. The quality of the fencers´ actions in competition will depend primarily on two of the systems involved in the process: on the one hand, the activation of the nervous system and, on the other, the response of the muscular system. One of the tools recently used to stimulate the neuromuscular system, and which has produced positive results in many research studies, has been the vertical vibration platform. Therefore, we decided to conduct a study with competition fencers with a protocol of acute exposure to vibration and to measure the effect produced by this tool on the neuromuscular system by means of the study of changes experienced in simple reaction times, the elective response times and movement times, as well as the effects on the efficacy of the fencing touch analyzed before and after receiving the vibratory stimulus. The study was conducted with fencers in national competitions and belonging to the Technification Center of the Fencing Federation of Castilla y León (n = 38), with a mean age of 22 years (SD 9.08). The sample was composed of 12 women and 26 men, by categories cadets (13), juniors (12), and seniors (13). The protocol chosen was performed by each participant on three occasions: an initial one, another after going through a stimulation load on the vibration platform, and a final phase, after a 10 minute recovery time to assess the degree of dissipation of the vibratory effect. The stimulus chosen on the vibration platform was a frequency of 50 Hz, for a period of 60 seconds and an amplitude of 4 mm. The results were analyzed according to the following dependent variables: the reaction time, the response time, the accuracy and the efficiency. This data was crossed with the independent variables: gender, category, sporting level and the years of experience. The purpose of this study was analyze the effects of neuromuscular stimulation intervention in a group of fencing competition shooters. The results showed that the mechanical neuromuscular stimulation (MNS) load applied in our study led to a modest effect on the neuromuscular response of the fencers involved in the research. Significant effects were found caused by the vibratory stimulus on the simple reaction time 8,1%, elective response time 10%, as well as the accuracy 7%, and efficiency 18,5%. We should also point out that slight differences by gender were observed, finding a greater effect in females. It should be emphasized that the specific characteristics of the sample appear to have significantly influenced the results. Finally, we should note that the residual effect produced by the stimulation applied in our research in some cases exceeded ten minutes, given that positive effects of the mechanical neuromuscular stimulation were found in several of the final scores.

MIA - a free and open source software for gray scale medical image analysis

Background Gray scale images make the bulk of data in bio-medical image analysis, and hence, the main focus of many image processing tasks lies in the processing of these monochrome images. With ever improving acquisition devices, spatial and temporal image resolution increases, and data sets become very large. Various image processing frameworks exists that make the development of new algorithms easy by using high level programming languages or visual programming. These frameworks are also accessable to researchers that have no background or little in software development because they take care of otherwise complex tasks. Specifically, the management of working memory is taken care of automatically, usually at the price of requiring more it. As a result, processing large data sets with these tools becomes increasingly difficult on work station class computers. One alternative to using these high level processing tools is the development of new algorithms in a languages like C++, that gives the developer full control over how memory is handled, but the resulting workflow for the prototyping of new algorithms is rather time intensive, and also not appropriate for a researcher with little or no knowledge in software development. Another alternative is in using command line tools that run image processing tasks, use the hard disk to store intermediate results, and provide automation by using shell scripts. Although not as convenient as, e.g. visual programming, this approach is still accessable to researchers without a background in computer science. However, only few tools exist that provide this kind of processing interface, they are usually quite task specific, and don’t provide an clear approach when one wants to shape a new command line tool from a prototype shell script. Results The proposed framework, MIA, provides a combination of command line tools, plug-ins, and libraries that make it possible to run image processing tasks interactively in a command shell and to prototype by using the according shell scripting language. Since the hard disk becomes the temporal storage memory management is usually a non-issue in the prototyping phase. By using string-based descriptions for filters, optimizers, and the likes, the transition from shell scripts to full fledged programs implemented in C++ is also made easy. In addition, its design based on atomic plug-ins and single tasks command line tools makes it easy to extend MIA, usually without the requirement to touch or recompile existing code. Conclusion In this article, we describe the general design of MIA, a general purpouse framework for gray scale image processing. We demonstrated the applicability of the software with example applications from three different research scenarios, namely motion compensation in myocardial perfusion imaging, the processing of high resolution image data that arises in virtual anthropology, and retrospective analysis of treatment outcome in orthognathic surgery. With MIA prototyping algorithms by using shell scripts that combine small, single-task command line tools is a viable alternative to the use of high level languages, an approach that is especially useful when large data sets need to be processed.

A CAD development strategy for the next years

This paper suggests a new strategy to develop CAD applications taking into account some of the most interesting proposals which have recently appeared in the technology development arena. Programming languages, operating systems, user devices, software architecture, user interfaces and user experience are among the elements which are considered for a new development framework. This strategy considers the organizational and architectural aspects of the CAD application together with the development framework. The architectural and organizational aspects are based on the programmed design concept, which can be implemented by means of a three-level software architecture. These levels are the conceptual level based on a declarative language, the mathematical level based on the geometric formulation of the product model and the visual level based on the polyhedral representation of the model as required by the graphic card. The development framework which has been considered is Windows 8. This operating system offers three development environments, one for web pplications (HTML5 + CSS3 + JavaScript), and other for native applications C/C++) and of course yet another for .NET applications (C#, VB, F#, etc.). The use rinterface and user experience for non-web application is described ith XAML (a well known declarative XML language) and the 3D API for games and design applications is DirectX. Additionally, Windows 8 facilitates the use of hybrid solutions, in which native and managed code can interoperate easily. Some of the most remarkable advantages of this strategy are the possibility of targeting both desktop and touch screen devices with the same development framework, the usage of several programming paradigms to apply the most appropriate language to each domain and the multilevel segmentation of developers and designers to facilitate the implementation of an open network of collaborators.

Air Mines. Urban Space Station

Air Mines The sky over the city's port was the color of a faulty screen, only partly lit up. As the silhouette of nearby buildings became darker, but more clearly visible against the fading blur-filter of a background, the realization came about how persistent a change had been taking place. Slowly, old wooden water reservoirs and rattling HVAC systems stopped being the only inhabitants of roofs. Slightly trembling, milkish jellyfish-translucent air volumes had joined the show in multiples. A few years ago artists and architects seized upon the death of buildings as their life-saving media. Equipped with constructive atlases and instruments they started disemboweling their subjects, poking about their systems, dumping out on the street the battered ugliness of their embarrassing bits and pieces, so rightly hidden by facades and height from everyday view. But, would you believe it? Even ?old ladies?, investment bankers or small children failed to get upset. Of course, old ladies are not what they used to be. It was old ladies themselves that made it happen after years of fights with the town hall, imaginative proposals and factual arguments. An industry with little financial gains but lots of welcome externalities was not, in fact, the ground for investment bankers. But they too had to admit that having otherwise stately buildings make fine particulate pencils with their facades was not the worse that could happen. Yes, making soot pencils had been found an interesting and visible end product of the endeavor, a sort of mining the air for vintage writing tools one can actually touch. The new view from the street did not seem as solid or dignified as that of old, and they hated that the market for Fine Particulates Extraction (FPE, read efpee) had to be applied on a matrix of blocks and streets that prevented undue concentration of the best or worse solutions. It had to be an evenly distributed city policy in order for the city to apply for cleaning casino money. Once the first prototypes had been deployed in buildings siding Garden Avenue or Bulwark Street even fast movers appreciated the sidekick of flower and plant smell dripping down the Urban Space Stations (USS, read use; USSs, read uses) as air and walls cooled off for a few hours after sunset. Enough. It was all nice to remember, but it was now time to go up and start the lightweight afternoon maintenance of their USS. Coop discussions had taken place all through the planning and continued through the construction phase as to how maintenance was going to be organized. Fasters had voted for a pro, pay a small amount and let them use it for rent and produce. In the end some neighbors decided they were slow enough to take care and it was now the turn. Regret came periodically, sometimes a week before, and lasted until work actually started. But lately it had been replaced by anxiety when it needed to be passed over to the next caretaker. It did not look their shift was good enough and couldn?t wait to fix it. Today small preparations needed to be made for a class visit next day from a nearby cook school. They were frequenters. It had not been easy, but it shouldn?t have been that hard. In the end, even the easiest things are hard if they involve a city, buildings and neighbors. On the face of the data, the technicalities and the way final designs had been worked out for adaptation to the different settings, the decision of where to go was self evident, but organization issues and the ever-growing politics of taste in a city of already-gentrified-rodents almost put the project in the frozen orbit of timeless beautiful future possibilities. This is how it was. A series of designs by XClinic and OSS had made it possible to adapt to different building structures, leave in most cases the roof untouched and adapted a new technology of flexing fiberglass tubes that dissipated wind pressure in smooth bending.......

Percepción dispersa: Arquitectura y tactilidad en la sociedad de la comunicación

El tema de la tesis se centra en el pensamiento de Walter Benjamin y en el concepto de percepción distraída, desarrollado en el ensayo La obra de arte en la época de su reproducibilidad técnica (1936). El título percepción dispersa deriva de una profundización de los conceptos benjaminianos en términos lingüísticos, adoptando otros significados de la palabra distracción que relacionan este concepto a cuestiones de ámbito espacial y atmosférico. Benjamin sostiene que la arquitectura, en una época en la que se desarrollan y se difunden nuevas técnicas de reproducción/ comunicación, no se puede percibir solo de manera visual sino también táctil, interrelacionando la difusión de nuevas técnicas de reproducción, la tensión entre diferentes modalidades perceptivas y la arquitectura: según él, la dispersión de la vista a favor de la percepción táctil/háptica es un rasgo característico de una sociedad en la que se desarrollan y se difunden nuevas técnicas de reproducción. La tesis profundiza en estos temas, actualizando el concepto de distracción/dispersión para valorar las repercusiones de esta intuición en el ámbito de una parte de la producción arquitectónica contemporánea: se propone una contextualización histórica y una conceptual, relativas a los proyectos recientes de algunos de los autores que profundizan en el impacto de las nuevas tecnologías en el ámbito del proyecto de arquitectura. La hipótesis que se quiere demostrar es que se está desarrollando una tendencia que lleva proyectos o edificios de alto nivel tecnológico y informático desde un ámbito de (supuesto) predominio de la percepción visual, hasta una arquitectura que proporciona experiencias multisensoriales: espacios que se pueden medir con el movimiento, los músculos y el tacto, que desarrollan un conjunto de sensaciones táctiles/hápticas y no solo visuales. Finalmente se quiere verificar si, revertiendo siglos de evolución visual, la visión táctil y cercana siga siendo uno de los polos dialécticos que estructuran la experiencia de la arquitectura, como previsto por Benjamin hace 75 años. ABSTRACT The thesis focuses on the thought of Walter Benjamin and the concept of distracted perception, developed in the essay The Work of Art in the Age of Mechanical Reproduction (1936). The title derives from a linguistic approach to this concept which further explores the meaning of the word distraction, finally relating this kind of perception to spatial and atmospheric issues. Benjamin argues that architecture, thanks to the development of new reproduction/communication technologies, cannot be perceived exclusively in a visual way but also in a tactile way, interrelating new technologies of reproduction, perceptual modalities and architecture: according to him, the dispersion of the view in favor of tactile/ haptic perception is a fundamental characteristic of a technologically developed society. The thesis explores these issues, updating the concept of distraction/dispersion to assess its implications in the works of some architects that are exploring with their buildings the impact of new communication technologies in the field of architectural design. The hypothesis at the base of this work is that we are facing a new trend in this particular field: many of the most advanced buildings provide multisensory experience, and define spaces that can be better perceived with the sense of touch (haptic sense), going beyond a mere visual perception. Finally the thesis wants to verify if, reversing centuries of visual evolution, tactile and close vision remains one of the dialectical poles that stay at the base of the experience of architecture, as foreseen by Benjamin 75 years ago. ABSTRACT La tesi si basa sul pensiero di Walter Benjamin e sul concetto di percezione distratta, sviluppato nel saggio La opera d’arte nell’epoca della sua riproducibilità tecnica (1936). Il titolo, percezione dispersa, deriva da un approfondimento dei concetti benjaminiani in termini linguistici, adottando ulteriori significati della parola che il filosofo utilizza per indicare la distrazione e che relazionano questo termine a questioni di ambito spaziale ed atmosferico. Benjamin sostiene che l’architettura, in un’epoca nella quale si sviluppano e si diffondono nuove tecniche di riproduzione (o meglio: nuove tecnologie di comunicazione), non possa essere percepita solamente in maniera visuale, ma anche tattile, mettendo in relazione la diffusione di nuove tecnologie, la tensione tra differenti modalità percettive e l’architettura: secondo Benjamin, la dispersione della vista a favore di una ricezione tattile/aptica della realtà è una caratteristica tipica di quei momenti storici nei quali si manifestano grandi trasformazioni di ambito sociale e culturale dovute allo sviluppo di nuove tecnologie di comunicazione. La tesi approfondisce questi temi, aggiornando il concetto di distrazione/dispersione per valutarne le ripercussioni su una certa parte della produzione architettonica contemporanea: si propone una contestualizzazione storica ed una concettuale, relative ai progetti di alcuni architetti che lavorano da tempo sull’impatto delle nuove tecnologie nell’ambito del progetto di architettura. La ipotesi che si dimostra con questa tesi è che si sta sviluppando una contro-tendenza tattile, a seguito della quale molti degli edifici tecnologicamente ed informaticamente più avanzati strutturano la relazione con i propri utenti sulla base di esperienze multisensoriali, definendo spazi che possono essere percepiti attraverso una percezione aptica, piuttosto che visuale. In definitiva la tesi verifica che, superando secoli di evoluzione visuale, la visione tattile e ravvicinata e - più in generale - una percezione di tipo aptico continuano ad essere uno dei poli dialettici che strutturano l’esperienza dell’architettura, come previsto da Benjamin più di 75 anni fa.

Time domain passivity control for delayed teleoperation

La telepesencia combina diferentes modalidades sensoriales, incluyendo, entre otras, la visual y la del tacto, para producir una sensación de presencia remota en el operador. Un elemento clave en la implementación de sistemas de telepresencia para permitir una telemanipulación del entorno remoto es el retorno de fuerza. Durante una telemanipulación, la energía mecánica es transferida entre el operador humano y el entorno remoto. En general, la energía es una propiedad de los objetos físicos, fundamental en su mutual interacción. En esta interacción, la energía se puede transmitir entre los objetos, puede cambiar de forma pero no puede crearse ni destruirse. En esta tesis, se aplica este principio fundamental para derivar un nuevo método de control bilateral que permite el diseño de sistemas de teleoperación estables para cualquier arquitectura concebible. El razonamiento parte del hecho de que la energía mecánica insertada por el operador humano en el sistema debe transferirse hacia el entorno remoto y viceversa. Tal como se verá, el uso de la energía como variable de control permite un tratamiento más general del sistema que el control convencional basado en variables específicas del sistema. Mediante el concepto de Red de Potencia de Retardo Temporal (RPRT), el problema de definir los flujos de energía en un sistema de teleoperación es solucionado con independencia de la arquitectura de comunicación. Como se verá, los retardos temporales son la principal causa de generación de energía virtual. Este hecho se observa con retardos a partir de 1 milisegundo. Esta energía virtual es añadida al sistema de forma intrínseca y representa la causa principal de inestabilidad. Se demuestra que las RPRTs son transportadoras de la energía deseada intercambiada entre maestro y esclavo pero a la vez generadoras de energía virtual debido al retardo temporal. Una vez estas redes son identificadas, el método de Control de Pasividad en el Dominio Temporal para RPRTs se propone como mecanismo de control para asegurar la pasividad del sistema, y as__ la estabilidad. El método se basa en el simple hecho de que esta energía virtual debido al retardo debe transformarse en disipación. As__ el sistema se aproxima al sistema deseado, donde solo la energía insertada desde un extremo es transferida hacia el otro. El sistema resultante presenta dos cualidades: por un lado la estabilidad del sistema queda garantizada con independencia de la arquitectura del sistema y del canal de comunicación; por el otro, el rendimiento es maximizado en términos de fidelidad de transmisión energética. Los métodos propuestos se sustentan con sistemas experimentales con diferentes arquitecturas de control y retardos entre 2 y 900 ms. La tesis concluye con un experimento que incluye una comunicación espacial basada en el satélite geoestacionario ASTRA. ABSTRACT Telepresence combines different sensorial modalities, including vision and touch, to produce a feeling of being present in a remote location. The key element to successfully implement a telepresence system and thus to allow telemanipulation of a remote environment is force feedback. In a telemanipulation, mechanical energy must convey from the human operator to the manipulated object found in the remote environment. In general, energy is a property of all physical objects, fundamental to their mutual interactions in which the energy can be transferred among the objects and can change form but cannot be created or destroyed. In this thesis, we exploit this fundamental principle to derive a novel bilateral control mechanism that allows designing stable teleoperation systems with any conceivable communication architecture. The rationale starts from the fact that the mechanical energy injected by a human operator into the system must be conveyed to the remote environment and Vice Versa. As will be seen, setting energy as the control variable allows a more general treatment of the controlled system in contrast to the more conventional control of specific systems variables. Through the Time Delay Power Network (TDPN) concept, the issue of defining the energy flows involved in a teleoperation system is solved with independence of the communication architecture. In particular, communication time delays are found to be a source of virtual energy. This fact is observed with delays starting from 1 millisecond. Since this energy is added, the resulting teleoperation system can be non-passive and thus become unstable. The Time Delay Power Networks are found to be carriers of the desired exchanged energy but also generators of virtual energy due to the time delay. Once these networks are identified, the Time Domain Passivity Control approach for TDPNs is proposed as a control mechanism to ensure system passivity and therefore, system stability. The proposed method is based on the simple fact that this intrinsically added energy due to the communication must be transformed into dissipation. Then the system becomes closer to the ambitioned one, where only the energy injected from one end of the system is conveyed to the other one. The resulting system presents two benefits: On one hand, system stability is guaranteed through passivity independently from the chosen control architecture and communication channel; on the other, performance is maximized in terms of energy transfer faithfulness. The proposed methods are sustained with a set of experimental implementations using different control architectures and communication delays ranging from 2 to 900 milliseconds. An experiment that includes a communication Space link based on the geostationary satellite ASTRA concludes this thesis.

Pantalla táctil para el piloto en un monoplaza de la fórmula SAE

En este proyecto se ha desarrollado un sistema electrónico para un vehículo de Fórmula SAE. La Fórmula SAE es una competición orientada a estudiantes que se basa en el diseño y fabricación de un vehículo de carreras. Este vehículo será posteriormente testeado en una competición a nivel mundial. El principal objetivo de este proyecto es el estudio, diseño y creación de un sistema para la visualización de información en un vehículo a través de una pantalla táctil. El núcleo del sistema será un microcontrolador de 32 bits de Microchip programado en C sobre un sistema de desarrollo integrado. El sistema mostrará información que pueda ser de utilidad para el piloto del coche. La información que se mostrará en la pantalla provendrá de los diferentes sensores del propio vehículo (velocidad, rpm, temperatura, estado de la batería). Dichos sensores se comunicarán con el sistema a través de comunicación CAN Bus. Para el testeo del sistema se utilizará una herramienta de simulación CAN. Además de mostrar información, el piloto será capaz de seleccionar entre diferentes configuraciones para la conducción desde el propio volante. El sistema contiene además los elementos necesarios para la programación y depuración del microcontrolador PIC. ABSTRACT. In this project, an electronic application for a Formula SAE vehicle has been developed. The Formula SAE is a student-oriented competition based on the design and manufacture of a race car. This car will be later tested in a worldwide competition. The principal aim of this project is the study, design and manufacture of a system for the display of a vehicle’s information through a touch screen. The system core will be a 32-bit Microchip microcontroller programmed in C code over an Integrated Development Environment. The system will display useful information to the car driver. The information shown on the screen will come from the different sensors of the vehicle itself (speed, rpm, temperature, battery status). Those sensors will communicate with the system via CAN Bus. A CAN Bus simulator device will be used during the design testing. In addition to displaying information, the pilot will be able to select different driving configurations from the steering wheel itself. The system also contains the necessary elements for programming and debugging the PIC microcontroller.

Uso de Leap Motion en juegos didácticos para niños con necesidades educativas especiales

Este Trabajo de Fin de Grado (TFG) tiene el objetivo incorporar el dispositivo Leap Motion [1] en un juego educativo para niños con necesidades educativas especiales para permitirles aprender de una forma divertida mientras disfrutan con los mini juegos que ofrece nuestra aplicación. Está destinado al apoyo del sistema educativo para los niños con necesidades educativas especiales. Debido al público que tenemos como objetivo debemos de tener en cuenta que hay distintos tipos de usuarios según el tipo de discapacidad que tienen. Entre ellas tenemos discapacidad visual, auditiva, cognitiva y motriz. Tenemos distintos mini juegos para facilitar el aprendizaje de las letras y nuevas palabras, los nombres de colores y diferenciarlos y la asociación de conceptos mediante ejemplos sencillos como son ropa, juguetes y comida. Para hacer que la interacción sea más divertida tenemos distintos tipos de dispositivos de interacción: unos comunes como son el teclado y la pantalla táctil y otros más novedosos como son Kinect [2] y Leap Motion que es el que se introducirá en el desarrollo de este Trabajo de Fin de Grado. El otro objetivo de este proyecto es el estudio de los distintos dispositivos de interacción. Se quiere descubrir qué tipo de sistemas de interacción son más sencillos de aprender, cuáles son más intuitivos para los niños, los que les resultan más interesantes permitiendo captar mejor su atención y sus opuestos, es decir, los que son más difíciles de entender, los más monótonos y los más aburridos para ellos.---ABSTRACT---This Final Degree Project (TFG) aims to incorporate the Leap Motion device [1] in an educational game for children with special educational needs to enable them to learn in a funny way while enjoying the mini games that our application offered. It is intended to support the education system for children with special educational needs. Because the public that we have as objective we must take into account that there are different types of users depending on the type of disability they have. Among them we have visual, auditory, cognitive and motor disabilities. We have different mini games to make easier learning of letters and new words, names and distinguish colors and the association of concepts through simple examples such as clothing, toys and food. To make the interaction more fun we have different interaction devices: common such as the keyboard and the touch screen and other more innovative such as Kinect [2] and Leap Motion which is to be introduced in the development of this Final Degree Work. The other objective of this project is to study the various interaction devices. You want to find out what type of interaction systems are easier to learn, which are more intuitive for children, who are more interesting allowing better capture their attention and their opposites, that is, those that are more difficult to understand, the most monotonous and most boring for them.

Estudio y desarrollo del plan de negocio de una empresa: Sistema Web que gestiona e informa sobre las cuentas digitales que el cliente ingresa

El presente documento tiene como objetivo general desarrollar un plan de negocio para analizar la viabilidad de la creación de una nueva empresa, “MyTested S.L.”. Pretende ofrecer una herramienta para que las personas puedan comunicar a sus familiares el acceso a sus cuentas digitales una vez fallecidos. En cuanto a cómo surge la idea, fue a través de una noticia que trataba sobre el derecho al olvido en las redes sociales y en internet. Investigando un poco y prestando atención a los movimientos de las grandes empresas de internet, mi compañero/socio y yo, nos dimos cuenta de que ofrecer este servicio podría valer como negocio, ya que no existe mucha competencia en el mercado. Gracias a eso, nos planteamos en más de una ocasión la posibilidad de montar nuestro propio negocio, de forma que pudiéramos utilizar los conocimientos adquiridos en la universidad como base para crear la herramienta web. Escogimos empezar el proyecto utilizándolo como materia para el trabajo de fin de grado porque nos aporta dos valores muy importantes, ayuda de la comunidad de profesores existentes en la UPM, siendo una persona de gran aporte nuestro tutor Oscar Corcho y también, porque como estamos dedicando todo el tiempo a este proyecto, tener una fecha límite para presentar tanto la parte de modelo de negocio como la parte de desarrollo en una fecha concreta, nos ayuda a planificar y mantener una presión constante sobre el proyecto y así forzar a no abandonarlo ni prolongarlo. Con ello, nos encontramos con dos grupos de dificultades, la escasa formación a nivel empresarial y creación de modelos de negocio y en el ámbito del desarrollo al desconocimiento de tecnologías y APIs de las redes sociales. Al tratarse de una herramienta Web, parte de unos costes muy bajos como el alojamiento del servidor o la contratación temporal de comerciales para publicitar la herramienta entre funerarias y hospitales. Estos factores positivos benefician tanto la realización del proyecto como su avance. Como ya se puede intuir de la lectura del párrafo anterior, el servicio que ofrece la herramienta “MyTested S.L.” está relacionado con el segmento testamental de una persona fallecida, podríamos definirlo como testamento digital. Actualmente, vivimos en un mundo que se centra cada vez más en la parte digital y es por ello, que en un futuro cercano, todas las cuentas que creamos en internet tendrán que ser cerradas o bloqueadas cuando caen en el desuso por el fallecimiento del propietario, es en ese hueco donde podemos situarnos, ofreciendo una herramienta para poder trasladar la información necesaria a las personas elegidas por el cliente para que puedan cerrar o bloquear sus cuentas digitales. Consideramos que existe una interesante oportunidad debido a la escasez de oferta de este tipo de servicios en España y a nivel mundial. En Abril de 2015 hay inscritos en el registro Nacional de últimas voluntades 185.6651 personas por lo que encontramos que un 0,397%1 de las personas en España ha registrado su testamento. El gasto medio al hacer un testamento vital ante notario de tus bienes tiene un coste de 40 a 80 euros2 , este es el principal motivo por el que la mayoría de españoles no realiza su testamento antes de morir. Con este dato obtenemos dos lecciones, lo que la herramienta ofrece no es el documento notarial de los bienes del cliente, sino la sistema, puedan bloquear o cerrar sus cuentas. La segunda lección que obtenemos es que el precio tiene que ser muy reducido para poder llegar a un gran número de personas, añadiendo también el criterio de que el cliente podrá actualizar su información, ya que la información digital es muy fácil de cambiar y frecuente. Como se podrá leer en al apartado dedicado a nuestra visión, misión y valores, aunque estamos convencidos que se puede extraer de la lectura de cualquier parte de este documento, todos nuestros objetivos los queremos conseguir no sólo buscando un enfoque empresarial a nuestro día a día, sino convirtiendo nuestra responsabilidad social sincera, en uno de los retos que más nos ilusionan, fomentando para ello, aspectos como el desarrollo web, estudios de mercado, conocimiento de las necesidades de la población, nuevas tecnologías y negocio. En general, los objetivos que se pretenden cumplir con este estudio son: - Conocer los pasos para crear una empresa - Desarrollar un documento de plan de negocio que contenga lo siguiente: - Análisis de mercado - Definición de productos y/o servicios - Plan de publicidad y expansión (marketing) - Plan financiero - Capacidad para definir los requisitos de una aplicación Web. - Capacidad de elegir la tecnología idónea y actual de un sistema Web. - Conocer el funcionamiento de una empresa y cómo comunicarse con las herramientas gubernamentales. - Comprobar si las posibilidades que nos ofrece el entorno son las adecuadas para nuestras actividades. - Estudio, análisis de la competencia - Definir los diferentes perfiles de cliente para nuestro negocio. - Analizar la viabilidad de nuestro modelo de negocio. Para ello, comenzamos realizando una definición de las características generales del proyecto, detallando cuáles son las motivaciones que han hecho a los emprendedores embarcarse en el mismo, qué servicios ofreceremos a nuestros clientes, el porqué de la elección del sector, así́ como nuestra misión, visión y valores.---ABSTRACT---The goal and aim of the present document is to develop a business plan in order to analyze the viability of build a new enterprise, that we will name MyTested S.L., it wants offer a tool for sharing and to facilitate to the relatives of a dead person the access to the digital accounts. Talking about how come up the idea, it was once a have read a news over the “right of forgotten” throughout social nets and inside internet, researching a little and paying attention to the different movements of the biggest internet companies, my peer ( and partner) and I were aware that to offer this service might be a good business, because does not exist many competitors on this kind of market service, mainly thanks of that, we have planned on several times the possibility to build our owner company, in the way to use the capabilities that we achieved in the University as based to develop and make a web tool. We choose begin this project as subject of our Final Project Degree after analyze the positive and negative point of views: The positive was because it has two main values, firstly the support of the current teachers UPM community, specially our fellow Oscar Corcho and also because we can´t dedicate all our time to this project, so to have a deadline to present either the business model as the develop on time, help us to plan and remain a constant pressure over the project and neither drop out it or extend it more that the necessary. As a web tool, neither the hosting of maintenance or for sort out a net of temporary commercials for visiting hospitals or undertaker´s or insurances, the cost don´t are expensive In the negative side, however, we found twice some main difficulties, the few training as entrepreneur level and how to build a business model and on the other hand the lack of awareness of the technologies and apps of the social net software as well. As summary, these positives facts enhance to work project out and also to develop it. As we could understand reading on the latest paragraph, the service that will do MyTested tool is relation with the testament issue of a dead person, we might call as a digital testament. Currently we are living in world which is focus further on the digital life, for that in a near future every internet accounts should be closed or locked whenever aren´t used by the dead of the owner, this is a market niche (never better said) where we can lead, offering a tool that might transfer the necessary information to the chosen persons by the client in order to allow either close or lock his digital accounts. We are considering that there are interesting opportunities due to the few offers of that kind of service in Spain and at global level. In April 2015 there were 185.6651 persons registered in the Official National last will and testament, this figure mean that the 0,397%1 of the Spaniards citizens have registered their testaments. The average cost of doing the testament of your assets with a Notary is since 40 up to 80€2, this is one of the principal motives because the majority of the Spaniards don´t do it before dead. With these data we might get two lessons, we are not talking about an official notary testament at all, it is only for close or lock the digital accounts by the chosen person by the dead client, and the latest lesson, but not least, the price of our service must be very cheaper in order to achieve touch an important amount of people, knowing also that he client will be able update the information filled, considering that this kind of information is very easy to change and update frequently. As we can read on the stage dedicated to our Vision, Mission and Values, although we are persuaded that can be read in everywhere of this document as well, our aim doesn´t be an business focus on day to day, is also to become our honest social responsibility in this challenge, that is our mainly eagerness, enhancing some aspects as the web development, market research and the knowledge of the population needs, new technologies and new market opportunities. In general the goals that we would like get within this project are: - Achieve the knowledge needs for be an entrepreneurial, and find out the steps for star a business - Achieve market research skills - Products and services definitions - Advertising plan and growth (marketing plan) - Financial plan knowledge - Capability of a web design requirements - Capability for choose the best and actual technology for web design - Knowledge over how work out inside a company and how communicate with official tools. - Check whether the possibilities of the environment are the adequate for our activities. - Research and competitiveness analysis - Define the different profiles of the target for our business. - Analyze the viability of the business model For all that, we began with a definition of the general features of the project, detailing which are the motivations those done to the entrepreneurial get on board, which kind of service we offered to the client, also why the selection of the market sector and our mission, vision and value as well.