Structural control on present-day topography of a basement massif: the Central and Eastern Anti-Atlas (Morocco)

The Anti-Atlas basement massif extends South of the High Atlas, and, despite a very mild Cenozoic deformation, its altitude exceeds 1500m in large areas, reaching 3305m in Jbel Sirwa. Structural contours of the present elevation of a polygenic planation surface (the High Erosional surface) and of the base of Cretaceous and Neogene inliers have been performed to characterize the major tectonic structures. Gentle Cenozoic WSW-ENE- and N-Strending folds, of 60 to100km wavelength, reactivate Variscan structures, being the major contributors to the local topography of the Anti-Atlas. Reactivated thrusts of decakilometric to kilometric-scale and E-W trend involving the Neogene rocks exhibit a steep attitude and a small displacement, but they also produce a marked topographic expression. The resulting Cenozoic horizontal shortening along N-S sections across the Anti-Atlas is about 1%. The position of the major anticlinal hinges determines the location of the fluvial divides of the Warzazat basin and the Anti-Atlas, and a structural depression on one of these hinges (Jbel Saghro anticline) allowed the formerly endorheic Warzazat basin to drain southwards. The first Cenozoic structures generating local topography are of pre-mid Miocene age (postdated by 6.7Ma volcanic rocks at the Jbel Saghro), whereas the youngest thrust movements postdate the Pliocene sedimentary and volcanic rocks (involving 2.1Ma volcanic rocks at Jbel Sirwa). In addition to these features, the mean elevation of the Anti-Atlas at the regional scale is also the result of a mantle thermal anomaly reported in previous works for the entire Atlas system.

Lineaarisen hammashihnaservokäytön tilasäätö

Tuotantotehokkuus näyttelee yhä suurempaa roolia teollisuudessa, minkä vuoksi myös pakkauslinjas­toille joudutaan asettamaan suuria vaatimuksia. Usein leik­kaus- ja kappaleensiirtosovelluksissa käyte­tään lineaarisia ruuvikäyttöjä, jotka voitaisiin tietyin edellytyksin korvata halvemmilla ja osittain suori­tuskykyisimmillä hammashihnavetoisilla johteilla. Yleensä paikkasäädetty työsolu muodostuu kahden tai kolmen eri koordinaatisto­akselin suuntaan asen­netuista johteista. Tällaisen työsolun paikoitustarkkuuteen vaikuttavat muun muassa käytetty säätöra­kenne, moottorisäätöketjun viiveet, sekä laitteiston eri epälineaarisuudet, kuten kitka. Tässä työssä esitetään lineaarisen hammashihnaservokäytön dynaamista käytöstä kuvaava matemaatti­nen malli ja laaditaan mallin pohjalta laitteen simulointimalli. Mallin toimivuus varmistetaan käytän­nön identifiointitesteillä. Lisäksi työssä tut­kitaan, kuinka hyvään suorituskykyyn lineaarinen hammas­hihnaservokäyttö kyke­nee, jos teollisuudessa paikoitussäätörakenteena tyypillisesti käytetty kaskadira­kenne tai PID-rakenne korvataan kehittyneemmällä mallipohjaisella tilasäädinra­kenteella. Säädön toi­mintaa arvioidaan simulointien ja koelaitteistolla suoritetta­vien mittaus­ten perusteella.

Optimal slopes and speeds in uphill ski mountaineering: a laboratory study.

The purpose of this study was to estimate the energy cost of linear (EC) and vertical displacement (ECvert), mechanical efficiency and main stride parameters during simulated ski mountaineering at different speeds and gradients, to identify an optimal speed and gradient that maximizes performance. 12 subjects roller skied on a treadmill at three different inclines (10, 17 and 24 %) at three different speeds (approximately 70, 80 and 85 % of estimated peak heart rate). Energy expenditure was calculated by indirect calorimetry, while biomechanical parameters were measured with an inertial sensor-based system. At 10 % there was no significant change with speed in EC, ECvert and mechanical efficiency. At 17 and 24 % the fastest speed was significantly more economical. There was a significant effect of gradient on EC, ECvert and mechanical efficiency. The most economical gradient was the steepest one. There was a significant increase of stride frequency with speed. At steep gradients only, relative thrust phase duration decreased significantly, while stride length increased significantly with speed. There was a significant effect of gradient on stride length (decrease with steepness) and relative thrust phase duration (increase with steepness). A combination of a decreased relative thrust phase duration with increased stride length and frequency decreases ECvert. To minimize the energy expenditure to reach the top of a mountain and to optimize performance, ski-mountaineers should choose a steep gradient (~24 %) and, provided they possess sufficient metabolic scope, combine it with a fast speed (~6 km h(-1)).

Metsäpolttoaineiden vesitiekuljetus proomukalustolla

Metsäpolttoaineiden käyttö kasvaa lämpö- ja voimalaitoksissa ja mahdollisissa biojalostamoissa. Metsäpolttoaineilla voidaan saavuttaa päästövähennyksiä korvaamalla päästöintensiivisempiä polttoaineita. Metsäpolttoaineen kysynnän kasvu suurkäyttöpaikoilla luo uusia vaatimuksia metsäbiomassan hankintaan. Metsäpolttoaineiden vesitiekuljetuksen sisältämiä logistiikkajärjestelmiä kehittämällä toimitusvarmuutta pystytään parantamaan ja hankintaa laajentamaan kustannustehokkaasti ja ympäristöystävällisesti. Kuljetuskokeilut antoivat uutta tietoa vesitiekuljetuksen sisältämästä hankinnasta. Lastikapasiteetti nykyisen kaltaisessa Eurooppa IIa -suurproomussa vaihtelee 1200 tonnista jopa 1800 tonniin (kosteus 40 %) riippuen tiivistymisestä ja proomun modifiointiasteesta. Metsähakkeen energiatiheys oli suurproomukuljetuksissa keskimäärin 1 MWh/i-m3, joka oli 25 % parempi kuin vertailun hakerekkakuljetuksissa. Vesitiekuljetuksen kustannukset olivat kuljetuskokeiluissa lastauksineen ja purkuineen 0,02 €/MWh/km, ollen noin 20 % ketjun kokonaiskustannuksista. Simuloinnin edullisimpien vesitiekuljetusvaihtoehtojen vaihteluvälin kustannukset olivat vastaavasti 0,013 - 0,026 €/MWh/km. Lastauksen ja purun kustannus oli 0,4 - 0,6 €/MWh ja vesitiekuljetus 0,9 - 2,0 €/MWh (100 km). Ketjun kokonaiskustannukset hakkuutähdehakkeelle vaihtelivat simuloinnin edullisimpien vaihtoehtojen perusteella välillä 10,8 - 12,1 €/MWh (30 km rekka, 100 km proomu). Kuljetusketjujen simuloinnin kustannukset osoittivat proomukuljetusketjun olevan kilpailukykyinen vaihtoehto hakerekkakuljetusketjulle kalustosta ja vuosittaisista käyttötunneista riippuen kuljetusetäisyyden ylittäessä 100 km. Kustannustehokkain ratkaisu vesitiekuljetuksessa saavutettiin pienen aluksen ja suuren kokoluokan proomuyksikön kytkyeellä. Haketus kannattaa toteuttaa ennen proomukuljetuksen osuutta metsähakkeen paremman tiiviyden ja käsiteltävyyden perusteella. Logistiikkajärjestelmiä pitää kehittää tapauskohtaisesti käyttöpaikan tarpeet ja olosuhteet huomioon ottaen. Metsäpolttoaineiden vesitiekuljetuksen sisältämän logistiikan liiketoimintamallien vertailussa arvioitiin vaihtoehtoiset ulkoistetut toimintamallit paremmaksi kuin nykyinen urakointimalli. Tämä mahdollistaa paremman metsähakkeen saatavuuden ja logistiikan tehokkuuden lastausterminaaleissa. Terminaalitoiminnot ja proomukuljetukset lisäävät uusia liiketoimintamahdollisuuksia ja mahdollistavat metsäpolttoaineiden

Automatització de l’estació FESTO MPS2000C

L’Escola Politècnica Superior de la Universitat de Vic disposa d’una cèl·lula de fabricació didàctica de la marca FESTO que simula un procés d’assemblatge d’una comanda. Aquesta cèl·lula esta composta per quatre estacions diferenciades que poden treballar de forma independent o de forma conjunta, l’estació palets, l’estació plaques, l’estació cinta i l’estació magatzem. Cada estació és un conjunt de sensors i actuadors controlats per mitjà d’un PLC, aquests estan interconnectats a través d’un bus industrial. L’objectiu d’aquest treball consisteix en realitzar la substitució dels PLC’s, decidir el funcionament que han de tenir les estacions, instal·lar una pantalla tàctil pel control del procés i realitzar la programació de tots els elements. Aquest projecte ha estat realitzat en cinc fases principals: 1. Estudi i coneixement de les estacions, en aquesta fase s’ha estudiat els diferents sensors i actuadors que les conformen, així com el funcionament d’aquestes amb el programa i PLC’s antics. 2. Instal·lació i cablejat dels nous PLC’s i de la pantalla tàctil. 3. Estudi sobre el nou funcionament que han de seguir les estacions. 4. Programació dels nous dispositius seguint el funcionament acordat. 5. Posada en marxa del sistema i realització de proves. 6. Realització de la memòria del projecte, on s’expliquen les característiques i el funcionament de totes les estacions i de la pantalla tàctil. La conclusió que s’ha extret d’aquest treball és que l’automatització d’un procés de fabricació tot i que suposa un esforç inicial a nivell de recursos, un cop realitzada la instal·lació suposa una millora de l’eficiència del sistema. És per això que la indústria cada cop més tendeix a automatitzar els seus processos, no només per millorar la competitivitat, sinó també per realitzar tasques que les persones no poden executar de forma eficient o segura.

Control of permanent magnet linear synchronous motor in motion control applications

The aim of the thesis is to study the principles of the permanent magnet linear synchronous motor (PMLSM) and to develop a simulator model of direct force controlled PMLSM. The basic motor model is described by the traditional two-axis equations. The end effects, cogging force and friction model are also included into the final motor model. Direct thrust force control of PMLSM is described and modelled. The full system model is proven by comparison with the data provided by the motor manufacturer.

Present-day deformation of the Pyrenees revealed by GPS surveying and earthquake focal mechanisms until 2011

The Pyrenean mountain range is a slowly deforming belt with continuous and moderate seismic activity. To quantify its deformation field, we present the velocity field estimated from a GPS survey of the Pyrenees spanning 18 yr. The PotSis and ResPyr networks, including a total of 85 GPS sites, were installed and first measured in 1992 and 1995 1997, respectively, and remeasured in 2008 and 2010. We obtain a deformation field with velocities less than 1 mm yr−1 across the range. The estimated velocities for individual stations do not differ significantly from zero with 95 per cent confidence. Even so, we estimate a maximum extensional horizontal strain rate of 2.0 ± 1.7 nanostrain per year in a N S direction in the western part of the range. We do not interpret the vertical displacements due to their large uncertainties. In order to compare the horizontal strain rates with the seismic activity, we analyse a set of 194 focal mechanisms using three methods: (i) the 'r' factor relating their P and T axes, (ii) the stress tensors obtained by fault slip inversion and (iii) the strain-rate tensors. Stress and strain-rate tensors are estimated for: (i) the whole data set, (ii) the eastern and western parts of the range separately, and (iii) eight zones, which are defined based on the seismicity and the tectonic patterns of the Pyrenees. Each of these analyses reveals a lateral variation of the deformation style from compression and extension in the east to extension and strike-slip in the west of the range. Although the horizontal components of the strain-rate tensors estimated from the seismic data are slightly smaller in magnitude than those computed from the GPS velocity field, they are consistent within the 2σ uncertainties. Furthermore, the orientations of their principal axes agree with the mapped active faults.

Modelling syntectonic sedimentation: combining a discrete element model of tectonic. Deformation and process-based sedimentary Model in 3D.

This paper presents a new numerical program able to model syntectonic sedimentation. The new model combines a discrete element model of the tectonic deformation of a sedimentary cover and a process-based model of sedimentation in a single framework. The integration of these two methods allows us to include the simulation of both sedimentation and deformation processes in a single and more effective model. The paper describes briefly the antecedents of the program, Simsafadim-Clastic and a discrete element model, in order to introduce the methodology used to merge both programs to create the new code. To illustrate the operation and application of the program, analysis of the evolution of syntectonic geometries in an extensional environment and also associated with thrust fault propagation is undertaken. Using the new code, much more complex and realistic depositional structures can be simulated together with a more complex analysis of the evolution of the deformation within the sedimentary cover, which is seen to be affected by the presence of the new syntectonic sediments.

Counter-current Washing of Filter Cakes

The main objective of this thesis was to compare the efficiency of counter-current and co-current filter cake washing techniques. Filter cake washing is a common unit operation which is used in the chemical process industry for improving the recovery of the liquid phase or for purifying the solid phase of the filter cake. Counter-current displacement washing is more difficult to arrange and it requires additional process equipment but the advantage of counter-current method is that the consumption of wash water that is required for achieving certain filter cake purity may be considerably decreased when compared to the co-current washing method. This is true especially for materials that are difficult to wash. The literature part of this thesis consists of a review of filter cake washing in general, including the basic principles of co-current and counter-current techniques, and a description of the structure and operation of a horizontal vacuum belt filter, which is the equipment considered in the experimental part of this thesis. Also the most common cake washing models are introduced. The experiments were performed by washing wheat apatite filter cakes in a laboratory scale vacuum filter by using both co-current and counter-current washing methods. The main results of these tests were the washing curves that relate the purity of the filter cake to the amount of wash liquid used. Comparison between the obtained washing curves showed that both washing methods could be efficiently applied for achieving good washing results. The differences between the wash liquid consumptions in the co-current and counter-current washing methods were found to be surprisingly small but this is most probably explained by the relatively good washing characteristics of the apatite cakes. The washing models introduced in the literature part were compared with the results obtained from the experiments and it was found out that the studied cake washing processes could be described

Detection of Varicosavirus and Ophiovirus in lettuce associated with lettuce big-vein symptoms in Brazil

During surveys undertaken from 1998 to 2003 in the major vegetable growing areas of the city of São Paulo green belt, lettuce (Lactuca sativa) and endive (Cichorium endivia) plants were observed, which showed chlorotic thickening of foliar veins, defective growth and, in some cases, failure to form complete heads. Biological and serological [DAS-Enzyme linked immunosorbent assay (Elisa)] tests together with electron microscope observations, revealed the presence of Lettuce big-vein virus and Mirafiori lettuce virus, in these plants both responsible for the lettuce big-vein syndrome.

Enhancement of water removal in the press section

The effectiveness of water removal on press section is very important for a paper and board machine’s functioning, efficiency and economy. Today, the most effective method for wet pressing is shoe press technology. Metso has carried out a number of studies concerning anew type of water removal method for a press section, which has also been patented. These studies include rough sketches and some test runs. These issues form the basis of this thesis. The objective of this work was to gather together information for a new and enhanced waterremoval method for a press section by studying the functioning of the device andcarrying out test runs. This method is referred to here as Hydronip. The main goal was tobuild a functional test site which fulfills all the necessary requirements and has all thenecessary information gathering devices. The design process was carried out by emphasizing the safety aspects. The goal was also to gather together information about the nip structure in running conditions, the seal function, and to carry out the nip tests with paper or board wads. This thesis consists of a theory part, the design and construction of the test site, and carrying out test runs through information gathering. The theory part consists of the principals of water removal from a press section, Hydronip construction, and the requirements for the test place. The safety aspects were taken into account especially in test runs, but also in the assembly stages. The design and construction of the test site includes the selection of equipment and surroundings that are needed for managing the test runs in the best possible way at certain premises. The test site included the equipment that was already on the premises. Some equipment could be used as it was but some equipment had to be manufactured or modified from existing equipment. A functional test site with information gathering devices was accomplished as a result of thethesis. Test runs demonstrated that the Hydronip concept is, at least on a small scale,functional. Short-term tests for seal functioning showed that the seal can be lubricatedsufficiently under different kinds of nip load situations. Wad tests demonstrated that the metal belt is durable against different sizes of external particles. The seal also endured wad tests even though the pressure impacts impaired the lubrication. MTS tests showing dry content increases, combined with a rough cost calculation and the basic function of the machine in test runs, show that with some further study Hydronip could be a promising new product for water removal from a paper or board machine’s press section.

Hammashihnajohdeakseleiden liikkeiden synkronointi

Nykyisessä valmistusteollisuudessa erilaisten robottien ja automatisoitujen tuotantovaiheiden rooli on erittäin merkittävä. Tarkasti suunnitellut liikkeet ja toimintavaiheet voidaan nykyisillä järjestelmillä ajoittaa tarkasti toisiinsa nähden, jolloin erilaisten virhetilanteidenkin sattuessa järjestelmä pystyy toimimaan tilanteen edellyttämällä tavalla. Automatisoinnin etuna on myös tuotannon muokkaaminen erilaisten tuotteiden valmistamiseen pienillä muutoksilla, jolloin tuotantokustannukset pysyvät matalina myös pienten valmistuserien tapauksissa. Usean akselin laitteissa eli niin sanotuissa moniakselikäytöissä laitteen toimintatarkkuus riippuu jokaisen liikeakselin tarkkuudesta. Liikkeenohjauksessa on perinteisesti ollut käytössä myötäkytketty paikkakaskadi, jonka virityksessä otetaan huomioon akselilla olevat erilaiset dynaamiset tilat ja käytettävät referenssit. Monissa nykyisissä hajautetuissa järjestelmissä eli moniakselikäytöissä, joissa jokaiselle akselille on oma ohjauslaite, ei yksittäisen akselin paikkavirhettä huomioida muiden akseleiden ohjauksessa. Työssä tutkitaan erilaisia moniakselijärjestelmien ohjausmenetelmiä ja myötäkytketyn paikkakaskadin toimintaa moniakselikäytössä pyritään parantamaan tuomalla paikkasäätimen rinnalle toinen säädin, jonka tulona on akseleiden välinen paikkaero.

Data mining techniques for identification of spectrally homogeneous areas using NDVI temporal profiles of soybean crop

The aim of this study was to group temporal profiles of 10-day composites NDVI product by similarity, which was obtained by the SPOT Vegetation sensor, for municipalities with high soybean production in the state of Paraná, Brazil, in the 2005/2006 cropping season. Data mining is a valuable tool that allows extracting knowledge from a database, identifying valid, new, potentially useful and understandable patterns. Therefore, it was used the methods for clusters generation by means of the algorithms K-Means, MAXVER and DBSCAN, implemented in the WEKA software package. Clusters were created based on the average temporal profiles of NDVI of the 277 municipalities with high soybean production in the state and the best results were found with the K-Means algorithm, grouping the municipalities into six clusters, considering the period from the beginning of October until the end of March, which is equivalent to the crop vegetative cycle. Half of the generated clusters presented spectro-temporal pattern, a characteristic of soybeans and were mostly under the soybean belt in the state of Paraná, which shows good results that were obtained with the proposed methodology as for identification of homogeneous areas. These results will be useful for the creation of regional soybean "masks" to estimate the planted area for this crop.

Hérnia traumática da parede abdominal

A rare case of blunt traumatic abdominal hernia is presented in which jejunal loops herniated through the abdominal wall. The patient had a serious motor vehicle accident seven years ago, while wearing the seat belt. He developed a traumatic hernia in the anterior lateral abdominal wall, which was operated, and relapsed after some months. The patient was reoperated and we observed the unattachment of the anterior lateral abdominal musculature from the ilium crest. After the hernial sac treatment, the defect was solved with the use of a polypropylene mesh. The postoperative evolution was good and four months later there were no signs of recurrence. Traumatic abdominal hernia remains a rare clinical entity, despite the increase in blunt abdominal trauma. Traumatic abdominal wall hernia falls into two general categories: small lower quadrant abdominal defects, typically the result of blunt trauma with bicycle handlebars, and larger abdominal wall defects related to motor vehicle accidents. The diagnosis may be often established by the physical examination alone. Conventional radiology and computerized tomography usefulness have been proved. In the vast majority of cases, early repair is recommended. The appropriate treatment is the reduction of the herniated bowel into the abdomen, the debridment of nonviable tissues, and a primary tension free closure of the detect.

Software for design of experiments and response modelling of cake ltration applications

Filtration is a widely used unit operation in chemical engineering. The huge variation in the properties of materials to be ltered makes the study of ltration a challenging task. One of the objectives of this thesis was to show that conventional ltration theories are di cult to use when the system to be modelled contains all of the stages and features that are present in a complete solid/liquid separation process. Furthermore, most of the ltration theories require experimental work to be performed in order to obtain critical parameters required by the theoretical models. Creating a good overall understanding of how the variables a ect the nal product in ltration is somewhat impossible on a purely theoretical basis. The complexity of solid/liquid separation processes require experimental work and when tests are needed, it is advisable to use experimental design techniques so that the goals can be achieved. The statistical design of experiments provides the necessary tools for recognising the e ects of variables. It also helps to perform experimental work more economically. Design of experiments is a prerequisite for creating empirical models that can describe how the measured response is related to the changes in the values of the variable. A software package was developed that provides a ltration practitioner with experimental designs and calculates the parameters for linear regression models, along with the graphical representation of the responses. The developed software consists of two software modules. These modules are LTDoE and LTRead. The LTDoE module is used to create experimental designs for di erent lter types. The lter types considered in the software are automatic vertical pressure lter, double-sided vertical pressure lter, horizontal membrane lter press, vacuum belt lter and ceramic capillary action disc lter. It is also possible to create experimental designs for those cases where the variables are totally user de ned, say for a customized ltration cycle or di erent piece of equipment. The LTRead-module is used to read the experimental data gathered from the experiments, to analyse the data and to create models for each of the measured responses. Introducing the structure of the software more in detail and showing some of the practical applications is the main part of this thesis. This approach to the study of cake ltration processes, as presented in this thesis, has been shown to have good practical value when making ltration tests.