Observation on the lunar and tidal influence on gill netting in the Bay of Bengal

The effect of lunar and tidal influence on the landing of pelagic fish with drift gill nets has been studied for the first time from Bay of Bengal along the Orissa coast. The catchability of the gear was highest during the first quarter and lowest in the fourth quarter of the moon. The variation in catch rates during the four different quarters was not statistically significant. Contrary to the earlier belief, landing with gill net was not poor during the moonlit nights. The extensive use of bluish grey nylon twine matching with seawater in place of indigenous hemp or cotton twine, has largely eliminated the visibility of gear during the brighter phase of the moon. The rate of exploitation was found to be significantly higher during the nights of neap tide, compared to those of spring tide. A plausible explanation for this phenomenon has been offered.

Comparative feature on design, construction and installation of three different model of low cost solar tunnel dryers

The study was conducted in collaboration with the ECFC project of the FAO (BGD/97/017) in Cox's Bazar to develop a low cost solar tunnel dryer for the production of high quality marine dried fish. The study areas were Kutubdiapara, Maheshkhali and Shahparirdip under Cox's Bazar district. Three different models of low cost solar dryer were constructed with locally available materials such as bamboo, wood, bamboo mat, hemp, canvas, wire, nails, rope, tin, polythene and net. Size of the dryers were: 20x4x3 ft ; 30x3x3 ft and 65x3x3 ft with the costs of Tk. 3060, 3530, 9600 for dryer 1, 2 and 3, respectively having different models. The drying capacities were 50, 150, 500 kg for dryer 1, 2 and 3 respectively. The average temperature range inside the dryers were 29-43°C, 34-51°C and 37-57°C for dryer 1, 2 and 3 respectively as recorded at 8:30h to 16:30h. The relative humidity were in the ranges of 22-42%, 27-39% and 24-41 % in dryer 1, 2 and 3 respectively. The fish samples used were Bombay duck, Silver Jew fish and Ribbon fish. The total drying time was in the range of 30-42, 28-38 and 24-34 hours to reach the moisture content of 12.3-14.5, 11.8-14.3, and 11.6-14.1% in dryer 1, 2 and 3 respectively. Among these three fish samples the drying was faster in Silver Jew fish followed by Bombay duck and Ribbon fish in all the three dryer.

Design and process selection for joints in flexible materials

The application of high performance textiles has grown significantly in the last 10 to 15 years. Various research groups throughout the United Kingdom, such as the Department of Trade and Industry, have identified technical textiles as a field for future development. There is little design guidance for joining of flexible materials or general property models that can be applied to theses materials. This lack is due to the large diversity of properties, structures and resulting behaviours of the materials that are classified as "Flexible Materials". This dissertation explores the issues that are involved in characterising the materials at the fibre, bulk and textile levels. Different units of measurement are used for each stage of the manufacturing process of flexible materials and this disparity creates problems when trying to make general comparisons (e.g. comparing textiles to polymer films). Thus, a possible solution to this is to create selection charts that allow designers to compare the strength of materials for a given mass per unit area. A design tool was created using the Cambridge Engineering Selector (CES) software to enable the selection of joining processes for material. The tool is effective in selecting a reduced number of viable joining processes. Through case studies it was shown that designers are required to examine the selected processes (identified by the software) in greater detail - in particular the economics and geometry of the joint - in order to identify the optimum joining process.

The status and causes of alien species invasion in China

Data of classification, origin, pathway and environmental impacts of invasive alien micro-organisms, invertebrates, amphibians and reptiles, fish, birds, mammals, weeds, trees, and marine organisms in terrestrial, aquatic and marine ecosystems of China, were analyzed, based on literature retrieval, field survey and consultation. Some 283 invasive alien species were recorded in China, including 19 invasive alien micro-organisms, 18 aquatic plants, 170 terrestrial plants, 25 aquatic invertebrates, 33 terrestrial invertebrates, 3 amphibians and reptiles, 10 fish, and 5 mammals. Of the invasive alien species, 55.1% originated from North and South America, 21.7% from Europe, 9.9% from Asia, 8.1% from Africa and 0.6% from Oceania. Many institutions and individuals in China lack adequate knowledge of ecological and environmental consequences caused by invasive alien species, with some ignorance of the dangerous invasion in the introduction of alien species. For instance, 50.0% of invasive alien plants were intentionally introduced as pasture, feedingstuff, ornamental plants, textile plants, medicinal plants, vegetables, or lawn plants, 25% of alien invasive animals were intentionally introduced for cultivation, ornament, or biological control, In addition, more efforts are being made in the introduction of alien species, and little attention is paid on the management of introduced alien species, which may cause their escape into natural environment and potential threats to the environment. There were also gaps in quarantine system in China. All microorganisms were unintentionally introduced, through timber, seedling, flowerpot, or soil; 76.3% of alien invasive animals invaded through commodity or transportation facility because of the failure of quarantine. Therefore, quarantine measures should be strictly implemented; and meanwhile the intentional introduction of alien species should be strictly managed and a system of risk assessment should be implemented.

酸化油固定床酶法合成生物柴油研究

酸化油是油脂工业中以皂脚、油脚经酸化处理得到的产品。它的主要成分是游离脂肪酸及中性油，是生产脂肪酸的重要原料，但生产过程中有水解废水的产生，若将其直接排放，既污染了环境又浪费了资源。生物柴油的主要成分是脂肪酸甲酯（fatty acid methyl ester，FAME）。它具有原料丰富而且可再生、可生物降解、无毒、不含芳香烃、二氧化硫等污染物、燃烧排放低、闪点高、运输储存安全等特点。作为石化柴油的潜在替代能源，生物柴油因其独特的优越性和现实的需求越来越受到关注。利用酸化油生产生物柴油不仅可以缓解生物柴油原料不足问题，还可解决酸化油所带来的环境问题。

The convertion of acid oil to biodiesel by use of immobilized Candida lipase absorbed on textile cloth was studied in a fixed bed reactor, which can not only reduce the environmental pollution of acid oil, but also produce a substitute for petroleum diesel. The acid oil mixed with methanol was pumped into three fixed bed reactors in series, and the methanol was added with the molar flow rate same as the acid oil in each reactor. The effects of enzyme content, solvent content, water content, flow rate of reactant and temperature on the enzymatic reaction were analyzed. The result of orthogonal experiments indicates that the optimal transesterification can be performed under the following conditions： immobilized lipase content in acid oil, 20% ; hexane content in acid oil, 10% ; water content in acid oil, 10%, reaction temperature, 50 ℃ ; and flow rate of reactant, 0.08 g/rain. Under these conditions, the FAME content of 90.18% in the product is obtained. The immobilized lipase can be reused with relatively stable activity after glycerol being removed from the surface. By refining, most of the chemical and physical properties of biodiesel will meet the American and Germany biodiesel standards and exceed the Chinese standard of 0^# petroleum diesel except for carbon residue, density and kinematic viscosity.

域间授权互操作研究综述

分布式系统安全是多域协作场景下的重要研究领域,近年来得到大力发展.在大多数实际的多域协作过程中,无论开发者还是管理者都不想完全摈弃已有的权限管理和访问控制体系,希望在授权开放性和系统改造代价间保持平衡和兼顾.域间授权互操作正是在这一背景下逐渐成为该领域具有代表性的研究方法.着力对域间互操作理论和技术的整体进展与演化进行细致梳理与剖析,从多维视角下对其进行归类比较,例如:根据域间协作架构划分,可分为松耦合协作模式和联邦式协作模式;根据安全检测实施方式划分,可分为基于协调中心的检测模式和无协调中心模式;根据互操作建模方式划分,主要包括基于管理行为的预前建立模式和基于请求驱动的实时建立模式;根据建立互操作采用的辅助技术划分,主要涉及基于信任、基于风险和基于语义等;根据策略整合所处的层面划分,可分为面向授权管理的策略集成和面向资源聚合的策略集成.针对若干典型方案,阐述其基本原理、适用场景,对技术特点和局限性给出较为深入的对比分析,在大量现有研究工作的基础上综述授权互操作发展的基本特点,归结展望了今后可能的研究趋势.

Ozonation of the purified hydrolyzed azo dye Reactive Red 120 (CI)

The combination of chemical and biological water treatment processes is a promising technique to reduce recalcitrant wastewater loads. The key to the efficiency of such a system is a better understanding of the mechanisms involved during the degradation processes. Ozonation has been applied to many fields in water and wastewater treatment. Especially for effluents of textile finishing industry ozonation can achieve high color removal, enhance biodegradability, destroy phenols and reduce the COD. However, little is known about the reaction intermediates and products formed during ozonation. This work focuses on the oxidative degradation of purified (>90%), hydrolyzed Reactive Red 120 (Color Index), a widely used azo dye in the textile finishing processes with two monochlorotriazine anchor groups. Ozonation of the dye in ultra pure water was performed in a laboratory scale cylindrical batch reactor. Decolorization, determined by measuring the light absorbance at the maximum wavelength in the visible range (53 5 nm), was almost complete after 150 min with an ozone concentration of 12.8 mg/l. The TOC/TOC0 ratio was about 74% and the COD was diminished to 46% of the initial value. The BOD5/COD ratio increased from 0.01 to 0.14. To obtain detailed information on the reaction processes during ozonation and the resulting oxidation products organic and inorganic anions were analyzed. Oxidation and cleavage of the azo group yielded nitrate. Cleavage of the sulfonic acid groups of aromatic rings caused an increase in the amount of sulfate. Formic acid and oxalic acid were identified as main oxidation products by high performance ion chromatography (HPIC). The concentrations of these major products were monitored at defined time intervals during ozonation.

Reflectance Map Techniques for Analyzing Surface Defects in Metal Castings

This report explores the relation between image intensity and object shape. It is shown that image intensity is related to surface orientation and that a variation in image intensity is related to surface curvature. Computational methods are developed which use the measured intensity variation across surfaces of smooth objects to determine surface orientation. In general, surface orientation is not determined locally by the intensity value recorded at each image point. Tools are needed to explore the problem of determining surface orientation from image intensity. The notion of gradient space , popularized by Huffman and Mackworth, is used to represent surface orientation. The notion of a reflectance map, originated by Horn, is used to represent the relation between surface orientation image intensity. The image Hessian is defined and used to represent surface curvature. Properties of surface curvature are expressed as constraints on possible surface orientations corresponding to a given image point. Methods are presented which embed assumptions about surface curvature in algorithms for determining surface orientation from the intensities recorded in a single view. If additional images of the same object are obtained by varying the direction of incident illumination, then surface orientation is determined locally by the intensity values recorded at each image point. This fact is exploited in a new technique called photometric stereo. The visual inspection of surface defects in metal castings is considered. Two casting applications are discussed. The first is the precision investment casting of turbine blades and vanes for aircraft jet engines. In this application, grain size is an important process variable. The existing industry standard for estimating the average grain size of metals is implemented and demonstrated on a sample turbine vane. Grain size can be computed form the measurements obtained in an image, once the foreshortening effects of surface curvature are accounted for. The second is the green sand mold casting of shuttle eyes for textile looms. Here, physical constraints inherent to the casting process translate into these constraints, it is necessary to interpret features of intensity as features of object shape. Both applications demonstrate that successful visual inspection requires the ability to interpret observed changes in intensity in the context of surface topography. The theoretical tools developed in this report provide a framework for this interpretation.

Biomimetic emulators of high potential peroxygenases: Implications in bioremediation and metabolic studies

Nowadays, classical (bio)remediation processes are affected by some economical and environmental drawbacks. These approaches often seem to be inadequate, particularly in the perspective of sustainable green processes. Since immobilized metalloporphines can emulate the active site of peroxidases and peroxygenases, their use in several bioremediation processes has been analyzed in this work. The described catalytic reactions use bioinspired, homogenized or heterogenized, commercial porphines and showed a remarkable ability to catalyze substrates oxidation at the expenses of different oxidants such as Oxone and hydrogen peroxide. The biomimetic catalysts have been also investigated about their peroxidase- and peroxygenase-like catalysis and ability to emulate lignolytic peroxidases action and substrate specificity. The adducts showed a remarkable ability to catalyze veratryl alcohol (widely recognized as a simple model compound of lignin) oxidation at the expenses of H2O2. In the perspective of broadening industrial applications of the described catalysts, the oxidation of several pollutants such as durable textile dyes and inorganic sulfides, has been attempted with quite promising results, and some findings open the way toward industrial scaling-up. Accordingly, the inexpensiveness of the synthesis and the mild operational conditions allow these adducts to be proposed as applicable catalysts also for industrial large-scale processes. Besides, these synthetic models are helpful also to understand the behavior of pharmaceuticals, antifungal drugs in this case, in the environment, and to predict the drug metabolism by cytochromes P450. The biomimetic catalysts, for the studied cases, also proved to be much more efficient than the corresponding enzymes.

Engineering design of a bioprocess for the production of natural red colourants by submerged fermentation of the thermophilic fungus Penicillium purpurogenum GH2

The development of a new bioprocess requires several steps from initial concept to a practical and feasible application. Industrial applications of fungal pigments will depend on: (i) safety of consumption, (ii) stability of the pigments to the food processing conditions required by the products where they will be incorporated and (iii) high production yields so that production costs are reasonable. Of these requirements the first involves the highest research costs and the practical application of this type of processes may face several hurdles until final regulatory approval as a new food ingredient. Therefore, before going through expensive research to have them accepted as new products, the process potential should be assessed early on, and this brings forward pigment stability studies and process optimisation goals. Only ingredients that are usable in economically feasible conditions should progress to regulatory approval. This thesis covers these two aspects, stability and process optimisation, for a potential new ingredient; natural red colour, produced by microbial fermentation. The main goal was to design, optimise and scale-up the production process of red pigments by Penicillium purpurogenum GH2. The approach followed to reach this objective was first to establish that pigments produced by Penicillium purpurogenum GH2 are sufficiently stable under different processing conditions (thermal and non-thermal) that can be found in food and textile industries. Once defined that pigments were stable enough, the work progressed towards process optimisation, aiming for the highest productivity using submerged fermentation as production culture. Optimum production conditions defined at flask scale were used to scale up the pigment production process to a pilot reactor scale. Finally, the potential applications of the pigments were assessed. Based on this sequence of specific targets, the thesis was structured in six parts, containing a total of nine chapters. Engineering design of a bioprocess for the production of natural red colourants by submerged fermentation of the thermophilic fungus Penicillium purpurogenum GH2.

Musculoskeletal symptoms among female garment factory workers in Sri Lanka.

OBJECTIVES: To assess the prevalence of musculoskeletal symptoms and their association with sociodemographic risk factors among female garment factory workers in Sri Lanka. METHODS: 1058 randomly selected female garment factory workers employed in the free trade zone of Kogalla, Sri Lanka were recruited to complete two interviewer-administered questionnaires assessing musculoskeletal symptoms and health behaviors. DISCUSSION: Musculoskeletal complaints among female garment workers in the FTZ of Kogalla are less common than expected. Sociocultural factors may have resulted in underreporting and similarly contribute to the low rates of healthcare utilization by these women. RESULTS: 164 (15.5%) of workers reported musculoskeletal symptoms occurring more than 3 times or lasting a week or more during the previous 12-month period. Back (57.3%) and knee (31.7%) were the most common sites of pain. Although most symptomatic women reported that their problems interfered with work and leisure activities, very few missed work as a result of their pain. Prevalence correlated positively with increased age and industry tenure of less than 12 months. Job type, body mass index, and education were not significant predictors of musculoskeletal symptoms.

Economic and social upgrading in global production networks: A new paradigm for a changing world

A key challenge in promoting decent work worldwide is how to improve the position of both firms and workers in value chains and global production networks driven by lead firms. This article develops a framework for analysing the linkages between the economic upgrading of firms and the social upgrading of workers. Drawing on studies which indicate that firm upgrading does not necessarily lead to improvements for workers, with a particular focus on the Moroccan garment industry, it outlines different trajectories and scenarios to provide a better understanding of the relationship between economic and social upgrading. The authors 2011 Journal compilation © International Labour Organization 2011.

Introduction: The apparel industry and North American economic integration

The economic and social consequences of international trade agreements have become a major area of inquiry in development studies in recent years. As evidenced by the energetic protests surrounding the Seattle meeting of the World Trade Organization (WTO) in December 1999 and the controversy about China's admission to the WTO, such agreements have also become a focus of political conflict in both the developed and developing countries. At issue are questions of job gains and job losses in different regions, prices paid by consumers, acceptable standards for wages and working conditions in transnational manufacturing industries, and the quality of the environment. All these concerns have arisen with regard to the North American Free Trade Agreement (NAFTA) and can be addressed through an examination of changes in the dynamics of the apparel industry in the post-NAFTA period.1 In this book, we examine the evolution of the apparel industry in North America in order to address some of these questions as they pertain to North America, with an eye toward the broader implications of our findings. We also consider the countries of the Caribbean Basin and Central America, whose textile and apparel goods are now allowed to enter the U.S. market on the same basis as those from Canada and Mexico (Odessey 2000). © 2009 by Temple University Press. All rights reserved.