Microbial quality of hemp (Cannabis sativa L.) and flax (Linum usitatissimum L.) from plants to thermal insulation

Flax and hemp have traditionally been used mainly for textiles, but recently interest has also been focused on non-textile applications. Microbial quality throughout the whole processing chain of bast fibres has not previously been studied. This study concentrates on the microbial quality and possible microbial risks in the production chain of hemp and flax fibres and fibrous thermal insulations. In order to be able to utilize hemp and flax fibres, the bast fibres must be separated from the rest of the plant. Non-cellulosic components can be removed with various pretreatment processes, which are associated with a certain risk of microbial contamination. In this study enzymatic retting and steam explosion (STEX) were examined as pretreatment processes. On the basis of the results obtained in this study, the microbial contents on stalks of both plants studied increased at the end of the growing season and during the winter. However, by processing and mechanical separation it is possible to produce fibres containing less moulds and bacteria than the whole stem. Enzymatic treatment encouraged the growth of moulds in fibres. Steam explosion reduced the amount of moulds in fibres. Dry thermal treatment used in this study did not markedly reduce the amount of microbes. In this project an emission measurement chamber was developed which was suitable for measurements of emissions from both mat type and loose fill type insulations, and capable of interdisciplinary sampling. In this study, the highest amounts of fungal emissions were in the range of 10^3 10^5 cfu/m^3 from the flax and hemp insulations at 90% RH of air. The fungal emissions from stone wool, glass wool and recycled paper insulations were below 10^2 cfu/m^3 even at 90% RH. Equally low values were obtained from bast fibrous materials in lower humidities (at 30% and 80% RH of air). After drying of moulded insulations at 30% RH, the amounts of emitted moulds were in all cases higher compared to the emissions at 90% RH before drying. The most common fungi in bast fibres were Penicillium and Rhizopus. The widest variety of different fungi was in the untreated hemp and linseed fibres and in the commercial loose-fill flax insulation. Penicillium, Rhizopus and Paecilomyces were the most tolerant to steam explosion. According to the literature, the most common fungi in building materials and indoor air are Penicillium, Aspergillus and Cladosporium, which were all found in some of the bast fibre materials in this study. As organic materials, hemp and flax fibres contain high levels of nutrients for microbial growth. The amount of microbes can be controlled and somewhat decreased by the processing methods presented.

Integrated pest management in cotton: exploiting behaviour-modifying (semiochemical) compounds for managing cotton pests

We review here research on semiochemicals for cotton pest management carried out in successive Cotton Co-operative Research Centres from 1998 to 2012. Australian cotton is now dominated by transgenic (Bt) varieties, which provide a strong platform for integrated pest management of key pests such as Helicoverpa spp., but new technologies are required to manage the development of resistance in Helicoverpa spp. to transgenic cotton and the problems posed by emerging and secondary pests, especially sucking insects. A long-range attractant for Helicoverpa moths, based on plant volatiles, has been commercialised as Magnet®. The product has substantial area-wide impacts on moth populations, and only limited effects on beneficial insects. Potential roles are being investigated for this product in resistance management of Helicoverpa spp. on transgenic cotton. Short-range, non-volatile compounds on organ surfaces of plants that do not support development of Helicoverpa spp. have been identified; these compounds deter feeding or oviposition, or are toxic to insect pests. One such product, Sero X®, is effective on Helicoverpa spp. and sucking pests such as whiteflies (Bemisia tabaci), green mirids (Creontiades dilutus), and other hemipteran insects, and is in the advanced stages of commercialisation.

Benefits of oxygation of subsurface drip-irrigation water for cotton in a Vertosol

Australian cotton (Gossypium hirsutum L.) is predominantly grown on heavy clay soils (Vertosols). Cotton grown on Vertosols often experiences episodes of low oxygen concentration in the root-zone, particularly after irrigation events. In subsurface drip-irrigation (SDI), cotton receives frequent irrigation and sustained wetting fronts are developed in the rhizosphere. This can lead to poor soil diffusion of oxygen, causing temporal and spatial hypoxia. As cotton is sensitive to waterlogging, exposure to this condition can result in a significant yield penalty. Use of aerated water for drip irrigation (‘oxygation’) can ameliorate hypoxia in the wetting front and, therefore, overcome the negative effects of poor soil aeration. The efficacy of oxygation, delivered via SDI to broadacre cotton, was evaluated over seven seasons (2005–06 to 2012–13). Oxygation of irrigation water by Mazzei air-injector produced significantly (P < 0.001) higher yields (200.3 v. 182.7 g m–2) and water-use efficiencies. Averaged over seven years, the yield and gross production water-use index of oxygated cotton exceeded that of the control by 10% and 7%, respectively. The improvements in yields and water-use efficiency in response to oxygation could be ascribed to greater root development and increased light interception by the crop canopies, contributing to enhanced crop physiological performance by ameliorating exposure to hypoxia. Oxygation of SDI contributed to improvements in both yields and water-use efficiency, which may contribute to greater economic feasibility of SDI for broadacre cotton production in Vertosols.

Water-use efficiency and productivity trends in Australian irrigated cotton: a review

The aim of this review is to report changes in irrigated cotton water use from research projects and on-farm practice-change programs in Australia, in relation to both plant-based and irrigation engineering disciplines. At least 80% of the Australian cotton-growing area is irrigated using gravity surface-irrigation systems. This review found that, over 23 years, cotton crops utilise 6-7ML/ha of irrigation water, depending on the amount of seasonal rain received. The seasonal evapotranspiration of surface-irrigated crops averaged 729mm over this period. Over the past decade, water-use productivity by Australian cotton growers has improved by 40%. This has been achieved by both yield increases and more efficient water-management systems. The whole-farm irrigation efficiency index improved from 57% to 70%, and the crop water use index is >3kg/mm.ha, high by international standards. Yield increases over the last decade can be attributed to plant-breeding advances, the adoption of genetically modified varieties, and improved crop management. Also, there has been increased use of irrigation scheduling tools and furrow-irrigation system optimisation evaluations. This has reduced in-field deep-drainage losses. The largest loss component of the farm water balance on cotton farms is evaporation from on-farm water storages. Some farmers are changing to alternative systems such as centre pivots and lateral-move machines, and increasing numbers of these alternatives are expected. These systems can achieve considerable labour and water savings, but have significantly higher energy costs associated with water pumping and machine operation. The optimisation of interactions between water, soils, labour, carbon emissions and energy efficiency requires more research and on-farm evaluations. Standardisation of water-use efficiency measures and improved water measurement techniques for surface irrigation are important research outcomes to enable valid irrigation benchmarks to be established and compared. Water-use performance is highly variable between cotton farmers and farming fields and across regions. Therefore, site-specific measurement is important. The range in the presented datasets indicates potential for further improvement in water-use efficiency and productivity on Australian cotton farms.

Managing glyphosate resistance in Australian cotton farming: modelling shows how to delay evolution and maintain long-term population control

Glyphosate resistance is a rapidly developing threat to profitability in Australian cotton farming. Resistance causes an immediate reduction in the effectiveness of in-crop weed control in glyphosate-resistant transgenic cotton and summer fallows. Although strategies for delaying glyphosate resistance and those for managing resistant populations are qualitatively similar, the longer resistance can be delayed, the longer cotton growers will have choice over which tactics to apply and when to apply them. Effective strategies to avoid, delay, and manage resistance are thus of substantial value. We used a model of glyphosate resistance dynamics to perform simulations of resistance evolution in Sonchus oleraceus (common sowthistle) and Echinochloa colona (awnless barnyard grass) under a range of resistance prevention, delaying, and management strategies. From these simulations, we identified several elements that could contribute to effective glyphosate resistance prevention and management strategies. (i) Controlling glyphosate survivors is the most robust approach to delaying or preventing resistance. High-efficacy, high-frequency survivor control almost doubled the useful lifespan of glyphosate from 13 to 25 years even with glyphosate alone used in summer fallows. (ii) Two non-glyphosate tactics in-crop plus two in-summer fallows is the minimum intervention required for long-term delays in resistance evolution. (iii) Pre-emergence herbicides are important, but should be backed up with non-glyphosate knockdowns and strategic tillage; replacing a late-season, pre-emergence herbicide with inter-row tillage was predicted to delay glyphosate resistance by 4 years in awnless barnyard grass. (iv) Weed species' ecological characteristics, particularly seed bank dynamics, have an impact on the effectiveness of resistance strategies; S. oleraceus, because of its propensity to emerge year-round, was less exposed to selection with glyphosate than E. colona, resulting in an extra 5 years of glyphosate usefulness (18 v. 13 years) even in the most rapid cases of resistance evolution. Delaying tactics are thus available that can provide some or many years of continued glyphosate efficacy. If glyphosate-resistant cotton cropping is to remain profitable in Australian farming systems in the long-term, however, growers must adapt to the probability that they will have to deal with summer weeds that are no longer susceptible to glyphosate. Robust resistance management systems will need to include a diversity of weed control options, used appropriately.

Changes in weed species since the introduction of glyphosate-resistant cotton

Weed management practices in cotton systems that were based on frequent cultivation, residual herbicides, and some post-emergent herbicides have changed. The ability to use glyphosate as a knockdown before planting, in shielded sprayers, and now over-the-top in glyphosate-tolerant cotton has seen a significant reduction in the use of residual herbicides and cultivation. Glyphosate is now the dominant herbicide in both crop and fallow. This reliance increases the risk of shifts to glyphosate-tolerant species and the evolution of glyphosate-resistant weeds. Four surveys were undertaken in the 2008-09 and 2010-11 seasons. Surveys were conducted at the start of the summer cropping season (November-December) and at the end of the same season (March-April). Fifty fields previously surveyed in irrigated and non-irrigated cotton systems were re-surveyed. A major species shift towards Conyza bonariensis was observed. There was also a minor increase in the prevalence of Sonchus oleraceus. Several species were still present at the end of the season, indicating either poor control and/or late-season germinations. These included C. bonariensis, S. oleraceus, Hibiscus verdcourtii and Hibiscus tridactylites, Echinochloa colona, Convolvulus sp., Ipomea lonchophylla, Chamaesyce drummondii, Cullen sp., Amaranthus macrocarpus, and Chloris virgata. These species, with the exception of E. colona, H. verdcourtii, and H. tridactylites, have tolerance to glyphosate and therefore are likely candidates to either remain or increase in dominance in a glyphosate-based system.

To Greta: The Biography of Kurt Tauber 1914-1995

The memoir contains poems, eulogies and family photos and was written in 1995 in Connecticut. Recollections of the author's childhood in an orthodox Jewish family in the Leopoldstadt, the second district in Vienna. He was the third of four children. His father was a businessman who was dealing with clothing and textile. Kurt was enrolled in the same class as his older brother Hans at Gymnasium. Memories of his Bar Mitzvah celebration. Cello lessons and concerts with his brother Hans. After graduation Kurt started to study medicine at the Anatomic Institute of Julius Tandler at the Vienna University. Member of the liberal medical students' union "Wiener Mediziner". Acquaintance with his future-wife Greta. Skiing trip in the mountains. Antisemitic attacks at University, particularly within the faculties of law and medicine. Arrest under the false accusation of distributing illegal literature. In January 1938 Greta and Kurt Tauber were married. Worsening of political situation and rising of the illegal Nazi movement in Austria. Recollections of the "Anschluss" (Nazi take-over) in March 1938. Affidavit for Greta and Kurt from her brother in the United States. In June 1938 they went to London, where they waited for their visas to the US. Fervent attempts to arrange exit permits for their families in Vienna. Greta and Kurt Tauber arrived in New York in October of 1938. Difficult start at the beginning. Kurt started to work in a bakery. Greta and Kurt moved to a small apartment in the Lower East Side. Move to Queens with Greta's parents. Kurt's parents arrived in 1940 and moved to Washington Heights. Kurt and Greta started a baking business in Kew Gardens, Queens. Birth of their daughters Judy in 1941 and Ellen in 1944. Recollections of Passover family celebrations and vacations in the mountains and at Fleischmann's in the Catskills. Description of business encounters and family events, such as the birth of their grandchildren. Journey to Israel. Retirement and

Tolle Jahre Versuch einer Lebensbeschreibung

Description of the author’s family background. His paternal family owned a tobacco and cigarres business in Ulm, which was transferred to Munich in 1888. The maternal family in Frankfurt am Main had a textile export business. Recollections of his schooldays at the Catholic St. Anna Schule. Antisemitic encounters at the local Gymnasium. Description of life in the 19th century. Reverence for the local royalties. The family was involved in the Zionist movement, as were most of the members of their local synagoge.

Cotton bunchy top virus and other relatives

Cotton bunchy top virus (CBTV) and the related Cotton leafroll dwarf virus (CLRDV) have caused sporadic disease outbreaks in most cotton regions of the world. Until recently, little was known about the diversity of CBTV or its natural host range. Seven natural field hosts and one experimental host of CBTV have now been identified. These include cotton, Malva parviflora (Marshmallow weed), Abutilon theophrasti (Velvetleaf), Anoda cristata (Spurred anoda), Hibiscus sabdariffa (Rosella), Sida rhombifolia (Paddy’s lucerne), Chamaesyce hirta (Asthma plant) and Gossypium australe. These are currently the only eight known hosts of CBTV. However the virus may have a wider host range than originally thought and include further non-Malvaceae species like asthma plant (family Euphorbiaceae). There are two distinct strains of CBTV in Australia, -A and -B, which have been detected in cotton from numerous locations across almost all growing regions. From 105 samples of cotton that have been positive for CBTV, 6 were infections of strain A only, 60 were strain B only and 64 were a mixed infection of strains A and B. These results indicate the symptoms of cotton bunchy top disease are closely associated with the presence of strain CBTV-B. A diagnostic assay for Cotton leafroll dwarf virus (CLRDV - cotton blue disease) is being developed and applied successfully for the detection of CLRDV samples from Brazil and Thailand. This is the first confirmation of CLRDV from SE-Asia, which may pose an increased biosecurity threat to the Australian industry.

IPM in the transgenic era: a review of the challenges from emerging pests in Australian cotton systems

The Cotton Catchment Communities Cooperative Research Centre began during a period of rapid uptake of Bollgard II® cotton, which contains genes to express two Bt proteins that control the primary pests of cotton in Australia, Helicoverpa armigera and H. punctigera. The dramatic uptake of this technology presumably resulted in strong selection pressure for resistance in Helicoverpa spp. against the Bt proteins. The discovery of higher than expected levels of resistance in both species against one of the proteins in Bollgard II® cotton (Cry2Ab) led to significant re-evaluation of the resistance management plan developed for this technology, which was a core area of research for the Cotton CRC. The uptake of Bollgard II® cotton also led to a substantial decline in pesticide applications against Helicoverpa spp. (from 10–14 to 0–3 applications per season). The low spray environment allowed some pests not controlled by the Bt proteins to emerge as more significant pests, especially sucking species such as Creontiades dilutus and Nezara viridula. A range of other minor pests have also sporadically arisen as problems. Lack of knowledge and experience with these pests created uncertainty and encouraged insecticide use, which threatened to undermine the gains made with Bollgard II® cotton. Here we chronicle the achievements of the Cotton CRC in providing the industry with new knowledge and management strategies for these pests.

Can sustainable cotton production systems be developed for tropical northern Australia?

This article reviews research coordinated by the Australian Cotton Cooperative Research Centre (CRC) that investigated production issues for irrigated cotton at five targeted sites in tropical northern Australia, north of 21°S from Broome in Western Australia to the Burdekin in Queensland. The biotic and abiotic issues for cotton production were investigated with the aim of defining the potential limitations and, where appropriate, building a sustainable technical foundation for a future industry if it were to follow. Key lessons from the Cotton CRC research effort were: (1) limitations thought to be associated with cotton production in northern Australia can be overcome by developing a deep understanding of biotic and environmental constraints, then tailoring and validating production practices; and (2) transplanting of southern farming practices without consideration of local pest, soil and climatic factors is unlikely to succeed. Two grower guides were published which synthesised the research for new growers into a rational blueprint for sustainable cotton production in each region. In addition to crop production and environmental impact issues, the project identified the following as key elements needed to establish new cropping regions in tropical Australia: rigorous quantification of suitable land and sustainable water yields; support from governments; a long-term funding model for locally based research; the inclusion of traditional owners; and development of human capacity.

A Patchwork of memories 1911-1997

Memoir describes her life in Germany, her decision to leave Germany after the death of her parents, and to work in the United States in 1934. Detailed description of every day life in Germany (after World War I) and in the United States, and later of various travels all over the world. Also mentions her German-Jewish ancestors on her maternal side (great-great-grandparents: Moritz and Fanny Hertz, great-grandmother: Helene Hertz nee Orthenberger), who had a textile business.

Dancer Casablanca 1930

A seated figure dressed in pink against a background of vegetation. Titled in lower left corner.

Quantifying the response of cotton production in eastern Australia to climate change

Abstract The paper evaluates the effect of future climate change (as per the CSIRO Mk3.5 A1FI future climate projection) on cotton yield in Southern Queensland and Northern NSW, eastern Australia by using of the biophysical simulation model APSIM (Agricultural Production Systems sIMulator). The simulations of cotton production show that changes in the influential meteorological parameters caused by climate change would lead to decreased future cotton yields without the effect of CO2 fertilisation. By 2050 the yields would decrease by 17 %. Including the effects of CO2 fertilisation ameliorates the effect of decreased water availability and yields increase by 5.9 % by 2030, but then decrease by 3.6 % in 2050. Importantly, it was necessary to increase irrigation amounts by almost 50 % to maintain adequate soil moisture levels. The effect of CO2 was found to have an important positive impact of the yield in spite of deleterious climate change. This implies that the physiological response of plants to climate change needs to be thoroughly understood to avoid making erroneous projections of yield and potentially stifling investment or increasing risk.

First report of Cotton leafroll dwarf virus in Thailand using a species-specific PCR validated with isolates from Brazil

Partial virus genome sequence with high nucleotide identity to Cotton leafroll dwarf virus (CLRDV) was identified from two cotton (Gossypium hirsutum) samples from Thailand displaying typical cotton leaf roll disease symptoms. We developed and validated a PCR assay for the detection of CLRDV isolates from Thailand and Brazil.