Production of mexican brown macroalgae fucoidan and fucosidases under an integral green technology bioproceses by the biorefinery concept

Marine ecosystem can be considered a rather exploited source of natural substances with enormous bioactive potential. In Mexico macro-algae study remain forgotten for research and economic purposes besides the high amount of this resource along the west and east coast. For that reason the Bioferinery Group of the Autonomous University of Coahuila, have been studying the biorefinery concept in order to recover high value byproducts of Mexican brown macro-algae including polysaccharides and enzymes to be applied in food, pharmaceutical and energy industry. Brown macroalgae are an important source of fucoidan, alginate and laminarin which comprise a complex group of macromolecules with a wide range of important biological properties such as anticoagulant, antioxidant, antitumoral and antiviral and also as rich source of fermentable sugars for enzymes production. Additionally, specific enzymes able to degrade algae matrix (fucosidases, sulfatases, aliginases, etc) are important tools to establish structural characteristics and biological functions of these polysaccharides. The aims of the present work were the integral study of bioprocess for macroalgae biomass exploitation by the use of green technologies as hydrothermal extraction and solid state fermentation in order to produce polysaccharides and enzymes (fucoidan and fucoidan hydrolytic enzymes). This work comprises the use of the different bioprocess phases in order to produce high value products with lower time and wastes.

Exploring the use of HPFRC and GFRP grids for the production of manhole covers

Corrosion of the steel reinforced concrete elements is one of the common pathologies that limits the long-term performance of urban infrastructures. This problem causes the loss of structural serviceability by decreasing the concrete-steel bond strength and reducing the cross section of the reinforcements. The present study introduces a new system for developing free-corrosion resistance prefabricated manhole covers for applications in the aggressive environments, i.e. wastewater collector systems, sewer systems, stormwater systems, etc. Fibre reinforced cement composites were applied in this system in order to suppress the corrodible steel mesh and maintain the structural ductility as well. Application of fibre reinforced polymer (FRP) system is adopted as the additional solution for increasing the load carrying capacity of these elements without concerns about corrosion. The effectiveness of the applied strategy in developing the manhole covers in terms of load carrying capacity and failure mode is evaluated in this research. Furthermore, this paper discusses a FEM-based simulation, aiming to address the possibility of calibrating the constitutive model parameters related to fracture modes I and II.

A confraria do comentário do futebol na TV: evolução dos programas televisivos feitos com adeptos dos maiores clubes portugueses

Em Portugal, os programas de televisão feitos com adeptos notáveis de três grandes clubes de futebol correspondem a um formato com menos de uma década e meia de existência: apareceram primeiro na RTP2 e, logo a seguir, na SIC. Os canais generalistas rapidamente os adoptaram como conteúdos privilegiados para atrair audiência. Hoje constituem âncoras das grelhas dos três canais temáticos de informação, rivalizando entre si nos comentadores permanentes que conseguem fixar em estúdio. Apresentados por jornalistas, estes programas criam momentos de grande polémica e, com isso, marcam, de certa forma, a agenda do campo do futebol. Neste artigo, explicamos a génese destes formatos, traçamos o seu percurso na TV portuguesa e, através de entrevistas aos seus responsáveis editoriais, analisamos a estratégia que seguem na construção do alinhamento, discutimos a distância que mantêm dos clubes que comentam e perspectivamos formas de evolução deste tipo de conteúdos televisivos. Uma linha sobressai neste trabalho: quem participa nestes programas é uma elite de comentadores que se apresentam como adeptos do Futebol Clube do Porto, do Sporting e do Benfica, mas que mais não são do que uma confraria do comentário do futebol que semanalmente contribui para a construção de um espaço público cada vez mais rarefeito em torno daquilo que se discute no futebol.

Da falsa integração do espectador na TV informativa

As actuais potencialidades tecnológicas abrem, perante o (tele)spectador, a promessa de um ilusório empowered user que se vai construindo alicerçado na narrativa mítica da omnipotência, tornada modo verbal e complemento directo da promessa moderna da omnividência. No entanto, os plateaux informativos da televisão portuguesa do século XXI ainda não vêem no telespectador um elemento estruturante do seu trabalho. São escassos os programas que abrem o alinhamento à participação do público e aqueles que o fazem atiram-no para margens que pouco ou nada interferem no desenvolvimento das emissões. Neste artigo, analisamos a integração dos telespectadores em 1673 emissões informativas, distribuídas por seis canais de televisão (RTP1, SIC, TVI, SICN, RTPN, TVI 24). Trata-se de uma investigação que desenvolvemos no âmbito do projecto “Jornalismo televisivo e cidadania”.

O ecrã da (hiper) televisão: novos olhares a partir das emissões dedicadas ao Euro 2012 na TV portuguesa

Dando continuidade a uma série de estudos já realizados no âmbito do projecto de investigação em que se insere, o presente trabalho questiona a evolução do ecrã televisivo como dispositivo supostamente convergente. Contrariando uma tendência discursiva dominante, quer na esfera dos media quer na própria produção académica sobre o medium televisivo, clarificam-se aqui alguns dos desenvolvimentos teóricos mais significativos, resultantes dos anos de trabalho que este projecto de investigação já tem. Propõe-se, pois, uma distinção conceptual entre o ecrã prometido pela cultura da convergência, que designamos como ecrã convergente, e o ecrã verdadeiramente resiliente da instituição-televisão, o ecrã centrípeto, que ainda obedece aos princípios de sequência e fluxo enunciados por Raymond Williams nos anos 1970.

Primusinter (ím)pares - análise da presença dos académicos nos plateaux informativos da TV portuguesa

Os académicos estão a tornar-se uma presença cada vez mais visível nos plateaux informativos da TV portuguesa. Não são um grupo muito diversificado. Pelo contrário. Apresentam-se como uma confraria que é oriunda das universidades de Lisboa e pertence a um reduzido número de campos de saberes. Aos plateaux televisivos portugueses dificilmente chegará o fazer-ciência concreto. O que chega são alguns dos seus actores, o que não significa que o consigam por um efeito de reconhecimento inter pares, mas, antes, por um efeito de verdadeiras imparidades: porque já adquiriram suficiente capital simbólico em zonas exteriores ao campo científico. Zonas mais limítrofes, como o campo institucional-académico, ou zonas mais afastadas, como o campo comunicacional.

A TV do Mundial

No último ano da primeira década do século XXI, quase a entrar na era da televisão digital, importa saber que modelo de TV existe em Portugal. A análise da programação informativa destinada a acompanhar o Campeonato do Mundo de Futebol 2010 ajudará, decerto, a encontrar respostas. Neste artigo, apresentamos um estudo que incidiu em formatos informativos sobre este grande evento mediático, emitidos nos canais generalistas e temáticos entre os dias 11 de Junho e 11 de Julho de 2010 (datas de arranque e fecho do Mundial de Futebol da África do Sul). Essa análise, que incidiu em 604 emissões, procurou conhecer as formas de integração do telespectador nas emissões televisivas e quem foi chamado aos estúdios televisivos para participar nos debates aí promovidos. Os dados apurados demonstram claramente que esta TV do Mundial continua pouco aberta à participação do público e circunscrita a um grupo restrito de convidados, a maior parte dos quais oriundos da classe jornalística. Não é possível falar-se numa terceira fase do audiovisual. A hiper-televisão pode esperar.

Workplace ergonomics in lean production environments: A literature review

BACKGROUND: Lean Production Systems (LPS) have become very popular among manufacturing industries, services and large commercial areas. A LPS must develop and consider a set of work features to bring compatibility with workplace ergonomics, namely at a muscular, cognitive and emotional demands level. OBJECTIVE: Identify the most relevant impacts of the adoption of LPS from the ergonomics point of view and summarizes some possible drawbacks for workplace ergonomics due to a flawed application of the LPS. The impacts identified are focused in four dimensions: work pace, intensity and load; worker motivation, satisfaction and stress; autonomy and participation; and health outcome. This paper also discusses the influence that the work organization model has on workplace ergonomics and on the waste elimination previewed by LPS. METHODS: Literature review focused LPS and its impact on occupational ergonomics conditions, as well as on the Health and Safety of workers. The main focus of this research is on LPS implementations in industrial environments and mainly in manufacturing industry workplaces. This is followed by a discussion including the authors’ experience (and previous research). RESULTS: From the reviewed literature it seems that there is no consensus on how Lean principles affect the workplace ergonomics since most authors found positive (advantages) and negative (disadvantages) impacts. CONCLUSIONS: The negative impacts or disadvantages of LPS implementations reviewed may result from the misunderstanding of the Lean principles. Possibly, they also happen due to partial Lean implementations (when only one or two tools were implemented) that may be effective in a specific work context but not suitable to all possible situations as the principles of LPS should not lead, by definition, to any of the reported drawbacks in terms of workplace ergonomics.

Characterization of the commercial fish production landed at Manaus, Amazonas State, Brazil

The present work aims to update a series of information about the regional fishing production, by presenting and characterizing the contribution of the different sub-systems of the Amazon basin to the catch landed at the main fishing market of Manaus, Brazil, from 1994 to 1996. Collectors specifically hired for this function registered key information on the fisheries. Thirty nine types or groups of fish were found in the fishing production landed. Jaraqui (Semaprochilodus spp.), curimatã (Prochilodus nigricans), pacu (Myleinae), matrinchã (Brycon cephalus), sardine (Triportheus spp.), aracu (Anostomidae) and tambaqui (Colossoma macropomum) were the most important items during three consecutive years. In 1994 these items summed up 91.6% of the total production; in 1995 and 1996 these values were, respectively, 85.3% and 86.4% of the total production. Tambaqui landed decreased remarkably during the period 1976-1996. There was a strong seasonal component in the production of the main species; jaraqui and matrinchã were mostly landed between April and June, while curimatã, pacu, and sardine were mostly landed during the dry season. Other important items showed a strong inter-annual variation in their production. The fishing production landed came mostly from the sub-system of the Purus River (around 30% of the total production). The subsystem of the Medium-Solimões contributed with an average of 15% and the sub-systems of the Madeira, Lower-Solimões, Upper-Amazon and Juruá, together contributed with 11.5% of the total production landed. Finally, the remaining sub-systems contributed with only 7.6% of the production.

Implementation of a lean six sigma project in a production line

Companies from the motorcycles components branch are dealing with a dynamic environment, resulting from the introduction of new products and the increase of market demand. This dynamic environment requires frequent changes in production lines and requires flexibility in the processes, which can cause reductions in the level of quality and productivity. This paper presents a Lean Six Sigma improvement project performed in a production line of the company's machining sector, in order to eliminate losses that cause low productivity, affecting the fulfillment of the production plan and customer satisfaction. The use of Lean methodology following the DMAIC stages allowed analyzing the factors that influence the line productivity loss. The major problems and causes that contribute to a reduction on productivity and that were identified in this study are the lack of standardization in the setup activities and the excessive stoppages for adjustment of the processes that caused an increase of defects. Control charts, Pareto analysis and cause-and-effect diagrams were used to analyze the problem. On the improvement stage, the changes were based on the reconfiguration of the line layout as well as the modernization of the process. Overall, the project justified an investment in new equipment, the defective product units were reduced by 84% and an increase of 29% of line capacity was noticed.

Using glass-fibre reinforced polymer composites in the production of sustainable water storage vessels

The present work focuses on the use of the life cycle assessment (LCA) and life cycle costing (LCC)methodologies to evaluate environmental and economic impacts of polymers and polymer composites materials and products. Initially a literature review is performed in order to assess the scope and limitations of existing LCA and LCC studies on these topics. Then, a case study, based on the production of a water storage glass-fibre reinforced polymer (GFRP) composite storage tank, is presented. The storage tank was evaluated via a LCA/LCC integrated model, a novel way of analysing the life cycle (LC) environmental and economic performances of structural products. The overarching conclusion of the review is that the environmental and economic performances of polymers composites in non-mobile applications are seldom assessed and never in a combined integrated way.

Engineering of fatty acid production and secretion in Saccharomyces cerevisiae

Tese de Doutoramento em Ciências - Especialidade em Biologia

Assessing the production of jet mix columns using alkali activated waste based on mechanical and financial performance and CO2 (eq) emissions

Recent research has proved the potential of alkaline activated fly-ash for soil stabilisation. However, such studies have not focused on the link between financial, mechanical and environmental aspects of this solution, but only on their absolute mechanical properties. The present paper characterises the mechanical behaviour of a large spectrum of activator-ash-soil combinations used to build jet mixing columns, analysing also the cost and CO2 (eq) emissions. The concern with these two vectors forced a decrease in the quantity of stabilising agent added to the soil, relatively to previous research, and the effects of such low quantities have not yet been published. However, the results clearly showed a significant improve in strength, still well above the average values expected when improving the stressstrain behaviour of a weak soil. Uniaxial compressive strength tests were used to assess the effects of the fly-ash percentage, the alkalieash ratio and the water content. The carbon calculator recently developed by the European Federation of Foundation Contractors and the Deep Foundations Institute was used to quantify the CO2 (eq) emissions associated with this technique. The financial cost was estimated based on the experience of a major Portuguese contractor. For comparison purposes, soil cement mixtures were also analysed, using similar conditions and tools used for the soil-ash analysis. Results showed that the cement and ash solutions are very similar in terms of overall performance, with some advantage of the former regarding financial cost, and a significant advantage of the latter regarding the CO2 (eq) emissions. This new grout, although it is in an embryonic stage, it has the potential for broader developments in the field.

Design and optimization of an extrusion die for the production of wood–plastic composite profiles

In this work, the optimization of an extrusion die designed for the production of a wood–plastic composite (WPC) decking profile is investigated. The optimization was performed with the help of numerical tools, more precisely, by solving the continuity and momentum conservation equations that govern such flow, and aiming to balance properly the flow distribution at the extrusion die flow channel outlet. To capture the rheological behavior of the material, we used a Bird-Carreau model with parameters obtained from a fit to the (shear viscosity versus shearrate) experimental data, collected from rheological tests. To yield a balanced output flow, several numerical runs were performed by adjusting the flow restriction at different regions of the flow-channel parallel zone crosssection. The simulations were compared with the experimental results and an excellent qualitative agreement was obtained, allowing, in this way, to attain a good balancing of the output flow and emphasizing the advantages of using numerical tools to aid the design of profile extrusion dies.

Measurement of the top pair production cross-section in 8 TeV proton-proton collisions using kinematic information in the lepton+jets final state with ATLAS

A measurement is presented of the tt¯ inclusive production cross section in pp collisions at a center-of-mass energy of s√=8  TeV using data collected by the ATLAS detector at the CERN Large Hadron Collider. The measurement was performed in the lepton+jets final state using a data set corresponding to an integrated luminosity of 20.3  fb−1. The cross section was obtained using a likelihood discriminant fit and b-jet identification was used to improve the signal-to-background ratio. The inclusive tt¯ production cross section was measured to be 260±1(stat)+22−23(stat)±8(lumi)±4(beam)  pb assuming a top-quark mass of 172.5 GeV, in good agreement with the theoretical prediction of 253+13−15  pb. The tt¯→(e,μ)+jets production cross section in the fiducial region determined by the detector acceptance is also reported.