溶剂诱导嵌段共聚物薄膜的微观相分离

通过研究发现薄膜厚度、溶剂对不同链段的选择性以及溶剂蒸汽处理时间对嵌段共聚物薄膜表面形态的演变有重要影响。对于对称双嵌段共聚物（PS-b-PMMA）薄膜在薄膜厚度小于0.5L_o时，在PMMA的选择性溶剂中处理不同时间时，除了得到垂直的lamellae形态外，还得到了有序纳米孔洞以及有序纳米孔洞和片层共存的新形态。同时其表面组成发生了变化，由最初PS位于表面层而转变为PMMA位于表面层。更进一步，得到的纳米结构图案化的薄膜具有环境敏感性。当将其置于对PS嵌段具有选择性的溶剂蒸汽中时，表面形貌发生了反转。另外研究发现，二元双嵌段共聚物共混体系，即小分子量的PS-b-PMMA和大分子量的PS-b-PMA共混，在硅基底上发生自组装形成具有有序孔洞结构的薄膜。这种结构完全不同于某一组分单独存在时所形成的微相结构。根本原因在于PMA和PMMA嵌段化学结构上的相似性，使PMMA链部分嵌入能量上优先吸附于极性基底的PMA嵌段中，形成了两种分子中的PS相容在一起构成的连续相围绕着塌陷的PMMA相的形态。

两亲性三嵌段共聚物在选择性稀溶液中的自组装及应用

本论文主要研究了ABA和ABC型两亲性三嵌段共聚物在选择性稀溶液中的自组装行为，得到了多种形态新颖、结构复杂多样的胶束，研究了这些复杂胶束的形成过程，探讨了影响胶束形态的各种因素并通过适当的方法对胶束形态进行调控。研究了聚乙烯基毗陡（P4VP）／聚苯乙烯（PS）三嵌段共聚物P4VP-b-PS-b-P4VP在二氧六环／水中的自组装行为，成功得到了嵌段共聚物环状胶束，并通过实验研究了环状胶束的形成过程。结果表明，胶束形态依赖于退火时间的长短。随着退火时间的延长，胶束结构从棒状过渡到环形结构。以实验结果为基础提出了环状胶束形成的新的机理，即囊泡塌陷形成环。同时，通过改变实验条件还得到了一些新型的环状复合结构，如环套环形、鸟状、哑铃形、戒指形、网络状等结构，并得到了与计算机模拟一致的结果。通过不同的方法对ABA型三嵌段共聚物（P4VP-b-PS-b-P4VP）在选择性溶液中的自组装胶束形态进行调控：首先，详细研究了P4VP-b-PS-b-P4VP在不同的共溶剂中的自组装行为。结果表明通过单纯改变共溶剂的性质可以很方便地调节胶束的形态，得到了球、棒、囊泡等结构。并用混合溶剂的方法得到了长度和直径可控的纳米线胶束。同时，通过加入第二种选择性溶剂（核层嵌段PS的选择性溶剂甲苯）的方法使形成胶束的核层嵌段在胶核中的伸展程度增加，从而使胶束形态发生转变。其次，研究了加入表面活性剂十五烷基苯酚（PDP）以构建分子间氢键来调节P4VP-b-PS-b-P4VP的胶束形态。结果表明，通过调节PDP的加入量可以使胶束形态发生从球到棒，到网络状、再到囊泡结构的转变。通过实验对比系统地研究了PDP的加入对胶束形态转变的影响，提出了相应的形态转变机理。再次，研究了不同分子量的嵌段共聚物之间共混及共聚物与均聚物共混对胶束形态的影响。结果表明加入亲油嵌段的均聚物对共聚物胶束形态影响非常明显，胶束形态与加入的均聚物的分子量及加入量直接相关。同时得到了一些新形态的胶束，如海绵状、笼子状等。共聚物共混的研究结果表明：通过两种不同分子量的共聚物共混可以得到这两种共聚物胶束的过渡态结构。用共聚物混合的方法还可以得到一些具有生物模拟性的胶束结构，如乌贼状、章鱼状等。这加深了人们对囊泡的形成机理及各种胶束形态之间形态转变的认识。P4VP-b-PS-b-P4VP通过在二氧六环／水中的自组装形成了囊泡，结果表明囊泡的尺寸依赖于初始状态下共聚物在共溶剂中的浓度及退火时间。除得到常规的球形囊泡外，还得到一些非球形囊泡，如长条形、三角形、项链形等囊泡结构。结合计算机模拟的方法研究了囊泡的形成机理，发现这些不同结构的囊泡的形成是由于初始状态下密度涨落所引起的。研究了实验中经常出现的各种胶束形态共存现象的原因，发现体系中亚稳态的存在是多形态共存的重要原因之一。通过聚苯乙烯一左聚乙烯基毗睫一左聚氧乙烯（PS一b一PZVP一b一PEO）在THF／水中的二次自组装首次得到了一种具有生物模拟性的巨大的节状蠕虫胶束（SWM）。研究发现，SWM是由重复单元盘状结构和丝状结构相连组成的。最令人吃惊的是这种SWM与自然界中的一些生命体如蛆叫、蛹、昆虫类的幼虫结构非常相似。通过对SWM形成过程中的中间态胶束结构的深入研究发现SWM是由球形胶束通过二次自组装形成的。SWM的形成过程可以分为三个阶段：ABC三嵌段共聚物先组装形成球形结构；这些球型结构粘连在一起形成梭形的中间结构；这些梭状中间结构中的球经过重组和重新调整各嵌段的排布最终形成SWM。用所得到的嵌段共聚物胶束为模板，采用无电沉积的方法成功制备了各种形态的金属一有机高分子纳米复合材料。用简单的方法还得到了导电金属金一银的双金属纳米结构材料。这些纳米结构材料在微电子器件等领域有潜在应用价值。以上研究结果丰富了人们对嵌段共聚物在选择性介质中自组装行为的理解，为人们提供了对生物材料自组装本质的理解的依据。这在两亲性分子在溶液中自组装的基础研究方面以及基于这些自组装形态而构建结构及功能更复杂的纳米结构材料等方面都有一定的意义。

聚苯乙烯-聚丁二烯嵌段共聚物反转相行为的研究

本论文以聚苯乙烯（PS）一聚丁二烯（PB）三嵌段和二嵌段共聚物体系为研究对象，利用聚合物的软有序化，控制聚合物分子链的取向和聚集条件，系统地考察了嵌段共聚物在由溶液成膜的过程中动力学效应和墒效应对其相结构和相转变行为的影响。并探讨了不同相结构和其力学性能之间的构效关系。设计了聚苯乙烯（PS）一聚丁二烯（PB）（PS≈30wt％）／非选择性溶剂体系，通过改变溶剂的挥发速率，控制了嵌段共聚物薄膜相结构形成的动力学过程。在快速挥发的条件下，在嵌段共聚物中观察到了特殊的反转相结构，即共聚物中含量多的组分（PB）形成了分散相，而当溶剂挥发很慢的条件下，得到的是热力学较稳定的正常相的结构。对不同分子量的一系列嵌段共聚物的研究表明，反转相的形成和分子量相关，与聚合物的链段数目无关，只有在低于临界分子量 （Mw=70-100 KDa）的嵌段共聚物中，成膜过程的动力学过程才影响嵌段共聚物薄膜的最终相态，即形成反转相。这种依赖于分子量的相转变行为，揭示了分子链运动速度与环境变化速率的匹配对嵌段共聚物薄膜有序相结构形成的重要作用，即动力学效应对聚合物软有序化的重要作用。利用冷冻干燥的方法，进一步研究了嵌段共聚物在极慢的溶剂挥发下，由溶液膜变成固体膜的过程中，随着溶液浓度的增加，不同聚合物分子链在溶液中自组织形成有序结构的过程。结果表明反转相是由稀溶液向亚浓溶液转变的过程中形成的。通过选取具有代表性的不同亲和性的溶剂：苯和环己烷及其混合溶剂，研究了溶剂对不同链段亲和性的差异对反转相形成的影响。由聚合物一溶剂相互作用参数判断，苯是体系的良溶剂，环己烷是体系的。溶剂，而苯对PS链段有较好的亲和性，与之相反环己烷对PB链段有较好的亲和性，通过对聚苯乙烯（PS）一聚丁二烯印B）二嵌段共聚物在苯和环己烷极其混合溶剂中的相转变行为的研究发现，随着溶剂对含量少的PS链段亲和性的降低，反转相不再出现。这是由于苯与PS．链段、环己烷与PB链段有更好的亲和性，嵌段共聚物在稀溶液中，在耗尽吸引的（depletion attraction）作用下，与溶剂亲和性弱的链段，在溶液中优先发生聚集，而有序聚集后导致的混合熵的损失会被更多的因有序聚集后小分子自由体积增加引起的平移嫡的增量所补偿，因此导致了嫡驱动的软有序化。最后，通过原子力显微镜纳米压印法，分别对反转相和正常相结构的纳米力学性能进行了对比研究，讨论了不同相结构间模量的差异，结果表明软段（PB）形成分散相结构时薄膜的模量总是小于硬段（PS）形成分散相结构时薄膜的模量，这主要是由嵌段共聚物不同组分的相对含量及形成的相的结构决定的。

丁苯嵌段共聚物(SBS,SB-4A)与均聚物PPO,PBD共混体系相容性的研究

本工作对不同分子构成的丁苯嵌段共聚物SBS（SB三嵌段共聚物）和SB－4A（SB四臂星型嵌段共聚物）分别与均聚物PPO，以及分别与不同分子量的均聚物PBD的共混体系进行了研究，探讨了嵌段共聚物分子构造，均聚物分子量和共混组成对共混体系的相容性和形态结构的影响。

Design of Topas photonic bandgap fiber with high birefringence and low confinement loss

A highly birefringent hollow-core photonic bandgap fiber based on Topas cyclic olefin copolymer is designed. The rhombic hollow-core with rounded corners is formed by omitting four central air holes of the cladding structure. The guided modes, birefringence and confinement loss of the fiber are investigated by using the full-vector finite element method. A high phase birefringence of the order of 10(-3), a group birefringence of the order of 10(-2) and confinement loss less than 0.1 dB/km are obtained at the central wavelength (1.55 mu m) range of the bandgap for fiber with seven rings of air holes in the cladding region. (C) 2010 Elsevier B.V. All rights reserved.

Comparison of aggregation behaviors between branched and linear block polyethers: MesoDyn simulation study

The comparison of aggregation behaviors between the branched block polyether T1107 (polyether A) and linear polyether (EO)(60)(PO)(40)(EO)(60) (polyether B) in aqueous solution are investigated by the MesoDyn simulation. Polyether A forms micelles at lower concentration and has a smaller aggregation number than B. Both the polyethers show the time-dependent micellar growth behaviors. The spherical micelles appear and then change to rod-like micelles with time evolution in the 10 vol% solution of polyether A. The micellar cluster appears and changes to pseudo-spherical micelles with time evolution in the 20 vol% solution of polyether A. However, the spherical micelles appear and change to micellar cluster with time evolution in the 20 vol% polyether B solution. The shear can induce the micellar transition of both block polyethers. When the shear rate is 1x10(5) s(-1), the shear can induce the sphere-to-rod transition of both polyethers at the concentration of 10 and 20 vol%. When the shear rate is lower than 1x10(5) s(-1), the huge micelles and micellar clusters can be formed in the 10 and 20 vol% polyether A systems under the shear, while the huge micelles are formed and then disaggregated with the time evolution in the 20 vol% polyether B system.

Synthesis and properties of two kinds of CPVC carboxylated ionic copolymers

In the present work, two kinds of CPVC carboxylated ionic copolymers were prepared by a new method. First, a graft copolymer (CPVC-cg-AA) comprising of polyacrylic acid (PAA) as branched chains and chlorinated polyvinyl chloride (CPVC) as backbone was synthesized by in-situ chlorinating graft copolymerization (ISCGC). Second, the acid groups of the graft copolymer were neutralized by sodium hydroxide and aluminium hydroxide, respectively in order to prepare carboxylated ionic copolymers.

Synthesis and luminescence properties of hybrid organic-inorganic transparent titania thin film activated by in-situ formed lanthanide complexes

Stable transparent titania thin films were fabricated at room temperature by combining thenoyltrifluoroacetone (TTFA)-modified titanium precursors with amphiphilic triblock poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO, P123) copolymers. The obtained transparent titania thin films were systematically investigated by IR spectroscopy, PL emission and excitation spectroscopy and transmission electron microscopy. IR spectroscopy indicates that TTFA coordinates the titanium center during the process of hydrolysis and condensation. Luminescence spectroscopy confirms the in-situ formation of lanthanide complexes in the transparent titania thin film.

Study on structure and molecular dynamics of starch/poly(sodium acrylate)grafted superabsorbent by C-13 solid state NMR

The domain-structure of samples containing a series of starch/poly(sodium acrylate)-grafted superabsorbents, pure starch, pure poly(sodium acrylate), and blend of starch/poly(sodium acrylate) has been studied by high-resolution solid-state C-13 NMR spectroscopy at room temperature. The result shows that the crystallinity of starch decreases greatly in the grafted and blended samples.

Mass transfer resistance in the production of high impact polypropylene

Mass transfer resistance in the production of high impact polypropylene (hiPP) produced by a two-stage slurry/gas polymerization was investigated by field-emission scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques. It is found that the formation of ethylene-propylene copolymer (EPR) phases in polypropylene (iPP) particle produced in the first stage slurry polymerization exhibits a developing process from exterior to interior

A strategy for synthesis of ion-bonded amphiphilic miktoarm star copolymers via supramolecular macro-RAFT agent

Amphiphilic supramolecular miktoarm star copolymers linked by ionic bonds with controlled molecular weight and low polydispersity have been successfully synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization using an ion-bonded macromolecular RAFT agent (macro-RAFT agent). Firstly, a new tetrafunctional initiator, dimethyl 4,6-bis(bromomethyl)-isophthalate, was synthesized and used as an initiator for atom transfer radical polymerization (ATRP) of styrene to form polystyrene (PSt) containing two ester groups at the middle of polymer chain. Then, the ester groups were converted into tertiary amino groups and the ion-bonded supramolecular macro-RAFT agent was obtained through the interaction between the tertiary amino group and 2-dodecylsulfanylthiocarbonylsulfanyl-2-methyl propionic acid (DMP). Finally, ion-bonded amphiphilic miktoarm star copolymer, (PSt)(2)-poly(N-isopropyl-acrylamide)(2), was prepared by RAFT polymerization of N-isopropylacrylamide (NIPAM) in the presence of the supramolecular macro-RAFT agent. The polymerization kinetics was investigated and the molecular weight and the architecture of the resulting star polymers were characterized by means of H-1-NMR, FTIR, and GPC techniques. (c) 2008 Wiley Periodicals, Inc.

Dynamic mechanical properties of gel polymer electrolytes containing ionic liquid

The copolymer of acrylonitrile (AN), methyl methacrylate (MMA) and poly(ethylene glycol) methyl ether methacrylate (PEGMEMA) is synthesized in 1-butyl-3-methylimidazolium tetrafluoroborate (BMImBF(4)). The dynamic mechanical properties of the resulting gel polymer electrolytes containing ionic liquid are measured.