Origin of needle fibre calcite (NFC) : a geochemical approach

ABSTRACTNeedle fibre calcite (NFC) is one of the most widespread habits of pedogenic calcite. It is a monocrystal of calcite, in the shape of a needle, with a diameter of one micron and a length between 4 and 103 times its width. NFC occurs in soils with different macroscopic and microscopic morphologies. Macroscopically, two main habits of NFC exist: "cotton ball'Mike clusters and as "powder" coating on pebbles inside the soil. It can also act as nucleation sites for precipitation of calcite cements of purely physicochemical origin (LCC - Late Calcitic Cement). Although many studies have been conducted on needle fibre calcite, its origin remains a subject of debate. The NFC having never been reproduced in the laboratory whatever the considered approach, the processes responsible for its precipitation as a so particular morphology remain unexplained. The shift between the length orientation of the needle crystal and the normal axis of calcite growth (c-axis) is also unresolved.Samples taken in two soils observed in quarries (Villiers and Savagnier) in the Swiss Jura Mountains are used to investigate the processes involved in the formation of these calcite crystals in pedogenic environments. Three groups of microscopic morphologies are distinguished: (i) simple needles (SN), (ii) simple needles with overgrowths (SNO), and (iii) simple needles with nanofibres (SNN), nanofibres being either organic or mineral in nature. These groups correspond to different stages in the formation and evolution of NFC.Comparison of carbon and oxygen isotope compositions of NFC with LCC, in relationship with the composition of the carbonate host rock (CHR), and the carbon isotope signature of dissolved inorganic carbon (DIC) from the soil waters, indicates that both NFC and LCC are precipitated in isotopic equilibrium with the soil solution. Similar Ô13C and Ô180 values of the elongated NFC and the rhombohedral calcite crystals of the LCC suggest that the precipitation of these different calcite habits is not due to changes in physicochemical conditions. The growth of NFC crystals inside an organic mould formed by the fungal hyphae could explain the formation of calcite ciystals in the shape of a needle in isotopic equilibrium with the local environment.Strontium and calcium isotope compositions of the three microscopic groups of NFC and LCC were also studied, in order to determine the origin of calcium (Ca2+) entrapped in the calcite lattice and to elucidate the processes responsible for the precipitation of NFC. The 87Sr/86Sr ratio of the SN is closer to the 87Sr/86Sr ratio of the carbonate host rock than the LCC, SNO, and SNN. This could be another clue for the formation of SN inside fungal hyphae, because fungi are known to dissolve the rocks to release and translocate through their hyphae nutrients necessary for their growth. SN and SNN are depleted in Sr and enriched in ^Ca compared to the LCC. In the context of Villiers quarry, where the two ciystal shapes precipitate at similar temperature (in a range of 0,6°C), such variations are the result of a slower precipitation rate of NFC, which is inconsistent with a purely physicochemically precipitated elongate crystal.Finally, NFC is enriched in major and trace elements (i.e. Fe, Zn, Cu, and Mo) compared to the LCC. This enrichment is ascribed to modification in precipitation processes between the NFC and LCC. Right now, it is not possible to preclude the influence of the particular shape of NFC or the biological influence. REEs are not fractionated in NFC, contrary to LCC. Thus, NFC does not precipitate from a percolation solution circulating downward the soil, which should lead to the fractionation of the REEs. As explained above, fungi, are able to dissolve and translocate nutrients. This kind of processes allows releasing elements in the soil solution without fractionation and could explain the particular chemical signature of NFC regarding the REEs.The geochemical approach to investigate the origin of NFC presented in this study does not allow providing direct clues to the fungal origin of NFC, but brings several new insights in the understanding of the formation of such a particular mineral, calcite needles, by precluding definitively their physicochemical origin.RESUMELa calcite en aiguilles (NFC) est l'une des formes les plus ubiquiste de calcite pédogénique. Il s'agit d'un monocrystal de calcite d'un diamètre d'un micron et d'une longueur 4 à 102 fois supérieure à sa largeur. A l'échelle macroscopique, la NFC a été observée sous deux principaux aspects : l'une « cotonneuse » et l'autre formant un mince croûte autour des graviers du sol. La NFC peut également servir de support à la nucléation de ciments secondaires précipités de manière purement physico-chimique (LCC). Malgré les nombreuses études menées sur la NFC, son origine demeure encore inconnue. A ce jour, aucune expérience en laboratoire n'a permis de créer de la calcite en aiguilles, et ce, quelque soit l'approche abordée. Par conséquent, les processus précis responsables de la précipitation calcite avec une telle morphologie restent inconnus. Le décalage existant entre l'axe d'allongement des aiguilles de calcite et l'axe normal de croissance de la calcite (axe c) reste inexpliqué.Des échantillons de NFC, LCC, roche mère, eau de pluie des différents horizons du sol ont été prélevés principalement au front de deux carrières de graviers, ainsi que dans un profil de sol adjacent à ces carrières, dans le but de mieux comprendre les processus à l'origine de la précipitation de calcite en forme d'aiguille. Trois micro-morphologies ont été distinguées: les aiguilles simples (SN), les aiguilles simples avec surcroissances calcitiques (SNO) et enfin les aiguilles simples avec nanofibres (SNN), celles-ci pouvant être de minérales ou organiques. Ces groupes, d'après nos résultats et les études antérieures pourraient correspondre à différentes étapes de formation de la calcite en aiguilles.Dans un premier temps, la comparaison des signatures isotopiques de la calcite en aiguilles, du LCC, de la roche mère et du carbone inorganique dissout dans la solution du sol (CID) indique que la NFC, tout comme le LCC, précipite en équilibre avec la solution du sol. Les valeurs similaires en Ô13C et δ180 de cristaux de calcite allongés (NFC) et rhombohédriques (LCC) formés dans un même milieu suggère que ces différences morphologiques ne peuvent pas être attribuées à des modifications purement physico-chimiques. La croissance de NFC à l'intérieur d'un moule organique comme les hyphes de champignons semble être la seule hypothèse plausible permettant d'expliquer la formation de monocrystaux allongés de calcite en équilibre avec leur environnement.La composition isotopique en strontium (Sr) et calcium (Ca) des LCC et des trois micro¬morphologies de la NFC ont été étudiées également, afin de déterminer l'origine du Ca2+ présent dans le réseau cristallin de la calcite en aiguilles, ainsi que les processus responsables de la formation de NFC. Les valeurs du rapport 87Sr/86$r de la forme SN sont les plus proches de celles de la roche mère par rapport aux formes SNN et SNO et du LCC. Ceci pourrait être un nouvel indice de l'implication des champignons dans la précipitation de calcite en aiguilles, puisqu'ils sont connus pour avoir la capacité de dissoudre les roches afin de libérer les nutriments nécessaires à leur croissance, ainsi que de les transloquer par leurs hyphes. De plus, les formes SN et SNN sont appauvries en Sr et enrichies en "Ca, comparativement au LCC. Dans le sol étudié, tous les carbonates de calcium précipitent à la même température, par conséquent, de telles variations sont dues à un taux de précipitation plus lent de SN et SNN, ce qui est contradictoire avec l'hypothèse physico-chimique. Pour finir, la NFC est enrichie en certains éléments majeurs et traces (i.e. Fe, Zn, Cu et Mo) par rapport au LCC. Ceci peut être attribué à différents processus de formation entre la NFC et le LCC. Pour le moment il est impossible d'exclure l'influence de la forme particulière de la NFC ou celle du champignon. Les terres rares (REEs) ne sont pas fractionnées dans la NFC, contrairement au LCC. Ceci peut être expliqué par le fait que la NFC précipite à partir d'une solution qui n'a pas percolé à travers le sol. Les champignons en dissolvant les roches mettent en solution éléments sans les fractionner. L'approche géochimique de l'étude de la calcite en aiguilles ne permets pas de produire des preuves directes sur sa potentielle origine fongique, mais permet de mieux comprendre comment un minéral aussi singulier que la NFC peut se former. D'autre pare cette étude permets d'exclure définitivement l'hypothèse physico-chimique de l'origine de la calcite en aiguilles

Construction mechanisms and thermal evolution of upper crustal intrusions : the Saint-Jean-du-Doigt bimodal intrusion (Brittany, France)

Understanding the emplacement and growth of intrusive bodies in terms of mechanism, duration, ther¬mal evolution and rates are fundamental aspects of crustal evolution. Recent studies show that many plutons grow in several Ma by in situ accretion of discrete magma pulses, which constitute small-scale magmatic reservoirs. The residence time of magmas, and hence their capacities to interact and differentiate, are con¬trolled by the local thermal environment. The latter is highly dependant on 1) the emplacement depth, 2) the magmas and country rock composition, 3) the country rock thermal conductivity, 4) the rate of magma injection and 5) the geometry of the intrusion. In shallow level plutons, where magmas solidify quickly, evi¬dence for magma mixing and/or differentiation processes is considered by many authors to be inherited from deeper levels. This work shows however that in-situ differentiation and magma interactions occurred within basaltic and felsic sills at shallow depth (0.3 GPa) in the St-Jean-du-Doigt (SJDD) bimodal intrusion, France. This intrusion emplaced ca. 347 Ma ago (IDTIMS U/Pb on zircon) in the Precambrian crust of the Armori- can massif and preserves remarkable sill-like emplacement processes of bimodal mafic-felsic magmas. Field evidence coupled to high precision zircon U-Pb dating document progressive thermal maturation within the incrementally built ioppolith. Early m-thick mafic sills (eastern part) form the roof of the intrusion and are homogeneous and fine-grained with planar contacts with neighboring felsic sills; within a minimal 0.8 Ma time span, the system gets warmer (western part). Sills are emplaced by under-accretion under the old east¬ern part, interact and mingle. A striking feature of this younger, warmer part is in-situ differentiation of the mafic sills in the top 40 cm of the layer, which suggests liquids survival in the shallow crust. Rheological and thermal models were performed in order to determine the parameters required to allow this observed in- situ differentiation-accumulation processes. Strong constraints such as total emplacement durations (ca. 0.8 Ma, TIMS date) and pluton thickness (1.5 Km, gravity model) allow a quantitative estimation of the various parameters required (injection rates, incubation time,...). The results show that in-situ differentiation may be achieved in less than 10 years at such shallow depth, provided that: (1) The differentiating sills are injected beneath consolidated, yet still warm basalt sills, which act as low conductive insulating screens (eastern part formation in the SJDD intrusion). The latter are emplaced in a very short time (800 years) at high injection rate (0.5 m/y) in order to create a "hot zone" in the shallow crust (incubation time). This implies that nearly 1/3 of the pluton (400m) is emplaced by a subsequent and sustained magmatic activity occurring on a short time scale at the very beginning of the system. (2) Once incubation time is achieved, the calculations show that a small hot zone is created at the base of the sill pile, where new injections stay above their solidus T°C and may interact and differentiate. Extraction of differentiated residual liquids might eventually take place and mix with newly injected magma as documented in active syn-emplacement shear-zones within the "warm" part of the pluton. (3) Finally, the model show that in order to maintain a permanent hot zone at shallow level, injection rate must be of 0.03 m/y with injection of 5m thick basaltic sills eveiy 130yr, imply¬ing formation of a 15 km thick pluton. As this thickness is in contradiction with the one calculated for SJDD (1.5 Km) and exceed much the average thickness observed for many shallow level plutons, I infer that there is no permanent hot zone (or magma chambers) at such shallow level. I rather propose formation of small, ephemeral (10-15yr) reservoirs, which represent only small portions of the final size of the pluton. Thermal calculations show that, in the case of SJDD, 5m thick basaltic sills emplaced every 1500 y, allow formation of such ephemeral reservoirs. The latter are formed by several sills, which are in a mushy state and may interact and differentiate during a short time.The mineralogical, chemical and isotopic data presented in this study suggest a signature intermediate be¬tween E-MORB- and arc-like for the SJDD mafic sills and feeder dykes. The mantle source involved produced hydrated magmas and may be astenosphere modified by "arc-type" components, probably related to a sub¬ducting slab. Combined fluid mobile/immobile trace elements and Sr-Nd isotopes suggest that such subduc¬tion components are mainly fluids derived from altered oceanic crust with minor effect from the subducted sediments. Close match between the SJDD compositions and BABB may point to a continental back-arc setting with little crustal contamination. If so, the SjDD intrusion is a major witness of an extensional tectonic regime during the Early-Carboniferous, linked to the subduction of the Rheno-Hercynian Ocean beneath the Variscan terranes. Also of interest is the unusual association of cogenetic (same isotopic compositions) K-feldspar A- type granite and albite-granite. A-type granites may form by magma mixing between the mafic magma and crustal melts. Alternatively, they might derive from the melting of a biotite-bearing quartz-feldspathic crustal protolith triggered by early mafic injections at low crustal levels. Albite-granite may form by plagioclase cu¬mulate remelting issued from A-type magma differentiation.

Hydrogen and oxygen isotope behaviors during variable degrees of upper mantle melting: Example from the basaltic glasses from Macquarie Island

We present measurements of hydrogen and oxygen isotopes in MORB glasses from Macquarie Island (SW. Pacific Ocean) coupled with determination of bulk H2O content by two independent techniques: total dehydration and FTIR. The incompatible trace elements in these glasses vary by a factor of 12 to 17, with K2O varying from 0.1 to 1.7 wt.%; these ranges reflect a variable degree of closed-system mantle melting, estimated from 1 to 15%. Water concentrations determined by the two techniques match well, yielding a range from 0.25 to 1.49 wt.% which correlates positively with all of the measured incompatible trace elements, suggesting that water is un-degassed, and behaves conservatively during mantle melting. Also, the agreement between the FTIR-determined and extracted water contents gives us confidence that the measured isotopic values of hydrogen reflect that of the mantle. Comparison of the range of water content with that of other incompatible trace elements allows estimation of the water partition coefficient in lherzolite, 0.0208 (ranging from 0.017 to 0.023), and the water content in the source, 386 ppm (ranging from 370 to 440 ppm). We observe a fairly narrow range in delta D and delta O-18 values of -75.5 +/- 4.5 parts per thousand and 5.50 +/- 0 .05 parts per thousand respectively, that can be explained by partial melting of normal lherzolitic mantle. The measured delta D and delta O-18 values of Macquarie Island glasses that range from nepheline- to hypersthene-normative, and from MORB to EMORB in composition, are identical to those in average global MORB. The observed lack of variation of delta D and delta O-18 with 1 to 15% degree of mantle melting is consistent with a bulk melting model of delta D and delta O-18 fractionation, in which water is rapidly scavenged into the first partial melt. The narrow ranges of delta D and delta O-18 in normal mantle are mostly due to the buffering effect of clino- and orthopyroxenes in the residual assemblage; additionally, fast ``wet'' diffusion of oxygen and hydrogen isotopes through the melting regions may further smooth isotopic differences. (C) 2012 Elsevier B.V. All rights reserved.

Origin of cadmium enrichments in carbonate rocks deposited in the Alpine Tethys area during the Middle-Late Jurassic

ABSTRACTThe pollution of air, soil and water by heavy metals through anthropogenic activities is an object of numerous environmental studies since long times. A number of natural processes, such as volcanic activity, hydrothermal fluid circulation and weathering of metal-rich deposits may lead to an additional and potentially important input and accumulation of heavy metals in the environment. In the Swiss and French Jura Mountains, anomalous high cadmium (Cd) concentrations (up to 16 ppm) in certain soils are related to the presence of underlying Cd-enriched (up to 21 ppm) carbonate rocks of Middle to Late Jurassic age. The aim of this study is to understand the processes controlling Cd incorporation into carbonate rocks of Middle and Late Jurassic age and to reconstruct the sedimentary and environmental conditions, which have led to Cd enrichments in these sedimentary rocks.Cd concentrations in studied hemipelagic sections in France vary between 0.1 and 0.5 ppm (mean 0.15 ppm). Trace-element behavior and high Mn concentrations suggest that sediment accumulation occurred in a well-oxygenated environment. Increases in Cd contents in the bulk-rock carbonate sediments may be related to increases in surface-water productivity under oxic conditions and important remineralization of organic matter within the water column. In platform settings preserved in the Swiss Jura Mountains, no correlation is observed between Cd contents and evolution of environmental conditions. Cd concentrations in these platform sections are often below the detection limit, with isolated peaks of up to 21 ppm. These important Cd enrichments are associated with peaks in Zn concentrations and are present in carbonate rocks independently of facies and age. The high Cd contents in these shallow-water carbonate rocks are partly related to the presence of disseminated, Cd-rich (up to 1.8%), sphalerite (ZnS) mineralization. The basement rocks are considered to be the source of metals for sulfide mineralization in the overlying Jurassic strata, as the sphalerite Pb isotope pattern is comparable to that of granite rocks from the nearby southern Black Forest crystalline massif. The Rb-Sr ages of sphalerite samples indicate that a main phase of sphalerite formation occurred near the boundary between the late Middle and early Late Jurassic, at around 162 Ma, as a result of enhanced tectonic and hydrothermal activity in Europe, related to the opening of the Central Atlantic and to the tectonic/thermal subsidence during spreading of the Alpine Tethys. I therefore propose to use unusually high Cd concentrations in carbonates as a tracer of tectonic activity in the Jura Mountains area, especially in the case when important enrichments in Zn co-occur. Paleoproductivity reconstructions based on records of authigenic Cd may be compromised not only by post-depositional redistribution, but also by incorporation of additional Cd from hydrothermal solutions circulating in the rock.The circulation of metal-rich hydrothermal fluids through the sediment sequence, in addition to specific environmental conditions during sedimentation, contributes to the incorporation of Cd into the carbonate rocks. However, only hydrothermal activity has led to the unusually high concentrations of Cd in carbonate rocks of Bajocian-Oxfordian age, through the formation of sphalerite mineralization.

Prevalence and characteristics of vitamin or dietary supplement users in Lausanne, Switzerland: the CoLaus study.

BACKGROUND AND OBJECTIVES: Vitamin+mineral supplement (VMS) and dietary supplement (DS) use is widespread in the general population, but the motivations for such use are poorly known. The prevalence and characteristics of VMS and DS users in Lausanne, Switzerland, were thus assessed. METHOD: Cross-sectional study was performed including 3249 women and 2937 men (CoLaus study). VMS were defined as single or multivitamin-multimineral preparations. DS included omega-3 or omega-6 fatty acids, herbal teas, plant or animal extracts and bacterial (Lactobacillus) preparations. Calcium and iron supplements were assessed separately. RESULTS: Twenty-six percent of the subjects reported using VMS or DS. VMS were the most frequently consumed item (16.8%), followed by DS (10%), calcium (6.6%) and iron (1.8%). Women reported a higher consumption than men. In women, VMS, DS and calcium use increased and iron use decreased with age, whereas in men only VMS and calcium intake increased with age. Multivariate analysis showed female gender, being born in Switzerland, increased age, higher education and increased physical activity to be positively related with VMS and DS. On bivariate analysis, VMS and DS users presented more frequently with arthritis, anxiety, depression and osteoporosis, but on multivariate analysis only positive relationships between DS use and anxiety/depression (odds ratio (OR)=1.40; 95% confidence interval (CI): [1.16-1.70]) and calcium and osteoporosis (OR=10.6; 95% CI [7.77-14.4]) were found. CONCLUSION: VMS and DS use is common in the population of Lausanne and associated with a better health profile. Calcium supplements are taken to prevent osteoporosis, whereas the rationale for taking other VMS and DS is unclear.

Equilibration and disequilibration between monazite and garnet: indication from phase-composition and quantitative texture analysis

The integration of information which can be gained from accessory [i.e. age (t)] and rock-forming minerals [i.e. temperature (T) and pressure (P)] requires a more profound understanding of the equilibration kinetics during metamorphic processes. This paper presents an approach comparing conventional P-T estimate from equilibrated assemblages of rock-forming minerals with temperature data derived from yttrium-garnet-monazite (YGM) and yttrium-garnet-xenotime (YGX) geothermometry. Such a comparison provides an initial indication on differences between equilibration of major and trace elements. Regarding this purpose, two migmatites, two polycyclic and one monocyclic gneiss from the Central Alps (Switzerland, northern Italy) were investigated. While the polycyclic samples exhibit trace-element equilibration between monazite and garnet grains assigned to the same metamorphic event, there are relics of monazite and garnet obviously surviving independent of their textural position. These observations suggest that surface processes dominate transport processes during equilibration of those samples. The monocyclic gneiss, on the contrary, displays rare isolated monazite with equilibration of all elements, despite comparably large transport distances. With a nearly linear crystal-size distribution of the garnet grain population, growth kinetics, related to the major elements, were likely surface-controlled in this sample. In contrast to these completely equilibrated examples, the migmatites indicate disequilibrium between garnet and monazite with a change in REE patterns on garnet transects. The cause for this disequilibrium may be related to a potential disequilibrium initiated by a changing bulk chemistry during melt segregation. While migmatite environments are expected to support high transport rates (i.e. high temperatures and melt presence), the evolution of equilibration in migmatites is additionaly related to change in chemistry. As a key finding, surface-controlled equilibration kinetics seem to dominate transport-controlled processes in the investigated samples. This may be decisive information towards the understanding of age data derived from monazite.

Colloid cysts of the third ventricle: correlation of MR and CT findings with histology and chemical analysis.

Eight patients with colloid cysts of the third ventricle were examined with CT and MR. In six, surgical resection was performed and the material was subjected to histologic evaluation; the concentrations of trace elements were determined by particle-induced X-ray emission. Stereotaxic aspiration was performed in two. The investigation showed that colloid cysts are often iso- or hypodense relative to brain on CT (5/8), but sometimes have a center of increased density. Increased density did not correlate with increased concentration of calcium or other metals but did not correlate with high cholesterol content. Colloid cysts appear more heterogeneous on MR (6/8) than on CT (3/8), despite a homogeneous appearance at histology. High signal on short TR/TE sequences is correlated with a high cholesterol content. A marked shortening of the T2 relaxation time is often noticed in the central part of the cyst. Analysis of trace elements showed that this phenomenon is not related to the presence of metals with paramagnetic effects. Our analysis of the contents of colloid cysts does not support the theory that differing metallic concentrations are responsible for differences in MR signal intensity or CT density. We did find that increased CT density and high MR signal correlated with high cholesterol content.

The Mont Collon mafic complex (Austroalpine Dent Blanche nappe) : permian evolution of the Western European mantle

Résumé: Le complexe du Mont Collon (nappe de la Dent Blanche, Austroalpin) est l'un des exemples les mieux préservés du magmatisme mafique permien des Alpes occidentales. Il est composé d'affleurements discontinus et d'une stratification magmatique en son centre (Dents de Bertol) et est composé à 95% de roches mafiques cumulatives (gabbros à olivine et/ou cpx, anorthositiques, troctolites, wehrlites et wehrlites à plagioclase) et localement de quelques gabbros pegmatitiques. Ces faciès sont recoupés par de nombreux filons acides (aphtes, pegmatites quartziques, microgranodiorites et filons anorthositiques) et mafiques tardifs (dikes mélanocrates riches en Fe et Ti). Les calculs thermométriques (équilibre olivine-augite) montrent des températures de 1070-1120 ± 6°C, tandis que le thermomètre amphibole-plagioclase indique une température de 740 ± 40°C à 0.5 GPa pour les amphiboles magmatiques tardives. La geobarométrie sur pyroxène donne des pressions moyennes de 0.3-0.6 GPa, indiquant un emplacement dans la croûte moyenne. De plus, les températures obtenues sur des amphiboles coronitiques indiquent des températures de l'ordre de 700 ± 40°C confirmant que les réactions coronitiques apparaissent dans des conditions subsolidus. Les âges concordants U/Pb sur zircons de 284.2 ± 0.6 et 282.9 ± 0.6 Ma obtenus sur un gabbro pegmatitique et une pegmatitique quartzique, sont interprétés comme des âges de cristallisation. Les datations 40Ar/39Ar sur amphiboles des filons mélanocrates donnent un âge plateau de 260.2 ± 0.7 Ma, qui est probablement très proche de l'âge de cristallisation. Ainsi, cet age 40Ar/39Ar indique un second évènement magmatique au sein du complexe. Les compositions des roches totales en éléments majeurs et traces montrent peu de variations, ainsi que le Mg# (75-80). Les éléments traces enregistrent le caractère cumulatif des roches (anomalie positive en Eu) et révèlent des anomalies négatives systématiques en Nb, Ta, Zr, Hf et Ti dans les faciès basiques. Le manque de corrélation entre éléments majeurs et traces est caractéristique d'un processus de cristallisation in situ impliquant une quantité variable de liquide interstitiel (L) entre les phases cumulus. Les distributions des éléments traces dans les minéraux sont homogènes, indiquant une rééquilibration .subsolidus entre cristaux et liquide interstitiel. Un modèle quantitatif basé sur les équations de cristallisation in situ de Langmuir reproduisent correctement les concentrations en terres rares légères des minéraux cumulatifs montrant la présence de 0 à 35% de liquide interstitiel L pour des degrés de différenciation F de 0 à 45%, par rapport au faciès les moins évolués du complexe. En outre, les valeurs de L sont bien corrélées avec les proportions modales d'amphibole interstitielle et les concentrations en éléments incompatibles des roches (Zr, Nb). Le liquide parental calculé des cumulats du Mont Collon est caractérisé par un enrichissement relatif en terres rares légères et Th, un appauvrissement en terres rares lourdes typique d'une affinité transitionnelle (T-MORB) et une forte anomalie négative en Nb-Ta. Les roches cumulatives montrent des compositions isotopiques en Nd-Sr proches de la terre globale silicatée (BSE), soit 0.6<εNdi<+3.2, 0.7045<87Sr/86Sri<0.7056. Les rapports initiaux en Pb indiquent une source dans le manteau enrichi subcontinental lithosphérique, préalablement contaminé par des sédiments océaniques. Les dikes mélanocrates Fe-Ti sont représentatifs de liquides et ont des spectres de terres rares enrichis, une anomalie positive en Nb-Ta et des εNdi de +7, des 87Sr/86Sri de 0.703 et des rapports initiaux en Pb, similaires à ceux des basaltes d'île océanique, indiquant une source asthénosphérique modérément appauvrie. Ainsi, la fusion partielle du manteau lithosphérique subcontinental est induite par l'amincissement post-orogénique et la remontée de l'asthénosphère. Les filons mélanocrates proviennent, après délamination du manteau lithosphérique, de la fusion de l'asthénosphère. Abstract The early Permian Mont Collon mafic complex (Dent Blanche nappe, Austroalpine nappe system) is one of the best preserved examples of the Permian mafic magmatism in the Western Alps. It is composed of discontinuous exposures and a well-preserved magmatic layering (the Dents de Bertol cliff) crops out in the center part of the complex. It mainly consists of cumulative mafic rocks, which represent 95 vol-% of the mafic complex (ol- and cpx-bearing gabbros and rare anorthositic layers, troctolites, wehrlites and plagioclase-wehrlites) and locally pegmatitic gabbros. All these facies are crosscut by widespread acidic (aplites, quartz-rich pegmatites, microgranodiorites) and late mafic Fe-Ti melanocratic dikes. Olivine-augite thermometric calculations yield a range of 1070-1120 ± 6°C, while amphibole-plagioclase thermometer yields a temperature of 740 ± 40°C at 0.5 GPa. Pyroxene geobarometry points to a pressure of 0.3-0.6 GPa, indicating a middle crustal level of emplacement. Moreover, temperature calculations on the Mont Conon coronitic amphiboles indicate temperatures of 700 ± 40°C, close to those calculated for magmatic amphiboles. These temperatures confirm that coronitic reactions occurred at subsolidus conditions. ID-TIMS U/Pb zircon ages of 284.2 ± 0.6 and 282.9 ± 0.6 Ma obtained on a pegmatitic gabbro and a quartz-pegmatitic dike, respectively, were interpreted as the crystallization ages of these rocks. 40Ar/39Ar dating on amphiboles from Fe-Ti melanocratic dikes yields a plateau age of 260.2 ± 0.7 Ma, which is probably very close to the crystallization age. Consequently, this 40Ar/P39Ar age indicates a second magmatic event. Whole-rock major- and trace-element compositions show little variation across the whole intrusion and Mg-number stays within a narrow range (75-80). Trace-element concentrations record the cumulative nature of the rocks (e.g. positive Eu anomaly) and reveal systematic Nb, Ta, Zr, Hf and Ti negative anomalies for all basic facies. The lack of correlation between major and trace elements is characteristic of an in situ crystallization process involving variable amounts of interstitial liquid (L) trapped between the cumulus mineral phases. LA-ICPMS measurements show that trace-element distributions in minerals are homogeneous, pointing to subsolidus re-equilibration between crystals and interstitial melts. A quantitative modeling based on Langmuir's in situ crystallization equation successfully reproduced the Rare Earth Element (REE) concentrations in cumulitic minerals. The calculated amounts of interstitial liquid L vary between 0 and 35% for degrees of differentiation F of 0 to 45%, relative to the least evolved facies of the intrusion. Furthermore, L values are well correlated with the modal proportions of interstitial amphibole and whole-rock incompatible trace-element concentrations (e.g. Zr, Nb) of the tested samples. The calculated parental melt of the Mont Collon cumulates is characterized by a relative enrichment in Light REE and Th, a depletion in Heavy REE, typical of a transitional affinity (T-MORB), and strong negative Nb-Ta anomaly. Cumulative rocks display Nd-Sr isotopic compositions close to the BSE (-0.6 < εNdi < +3.2, 0.7045 < 87Sr/86Sri < 0.7056). Initial Pb ratios point to an origin from the melting of an enriched subcontinental lithospheric mantle source, previously contaminated at the source by oceanic sediments. The contrasted alkaline Fe-Ti melanocratic dikes are representative of liquids. They display enriched fractionated REE patterns, a positive Nb-Ta anomaly and εNdi of +7, 87Sr/86Sri of 0.703 and initial Pb ratios, all reminiscent of Ocean Island Basalt-type rocks, pointing to a moderately

Accessory phases as a tool to investigate magmatic underplating in polymetamorphic metasediments : an example from a fossil lower crust : Ivrea Verbano zne, NW Italy

The Ivrea and the Strona-Ceneri zones, NW italy and S Switzerland, offer the possibility to study the continental crust of the Southern Alps. Because of its high metamorphic degree and the abundant Permo- Carboniferous mafic intrusions, the Ivrea Zone is classically interpreted an exposed section trough the Permian lower crust. The present work is focused here on metasedimentary slices (septa) intercalated within Permian gabbro (mafic complex). In particular I studied the evolution of accessory phases such as rutile and zircon and the chemistry of the metasediments. The septa build an irregular and discontinuous band that cut obliquely the mafic complex from its deepest part (N) to its roof (S). The chemistry of the metasediments evolves along the band and the chemical evolution can be compared with that observed in the country-rock surrounding the mafic intrusion to the NE and overprinted by a main regional metamorphic event. This suggests that the degree of chemical depletion of the septa was mainly established during the same regional metamorphic event. Moreover it suggests that incorporation of the septa within the gabbro did not modify their original stratigraphie distribution within the crust. It implies that the mafic complex has been emplaced following a dynamic substantially different from the classic model of « gabbro glacier » (Quick et al., 1992; Quick et al., 1994). It is more likely that it has been emplaced by repeated injections of sills at different depths during a protracted period of time. Zircon trace elements and U-Pb ages suggest that regional metamorphism occurred 330-320Ma, the first sills in the deepest part of the Mafic Complex are injected at ~300Ma, the mafic magmas reached higher levels in the crust at 285Ma and the magmatic activity continued locally until 275Ma. The ages of detrital cores in zircons fix the maximal sedimentation age at ~370Ma, this age corresponds therefore with the maximal age of the incorporation of the Ivrea zone within the lower crust. I propose that the Ivrea zone has been accreted to the lower crust during the Hercynian orogeny sensu lato. The analysis of detrital ages suggests that the source terrains for the Ivrea zone and those for the Strona-Ceneri zone have a completely different Palaeozoic history. The systematic analysis of rutile in partially molten metasediments of the Ivrea zone reveals the occurrence of two generations. The two generations are characterized by a different chemistry and textural distribution. A first generation is formed during pro-grade metamorphism in the restitic counterpart. The second generation is formed in the melts during cooling at the same time that part of the first generation re-equilibrate. Re-equilibration of the first generation seems to be spatially controlled by the presence of fluids. Locally the second generation forms overgrowths on the first generation. Considered the different diffusivity of U and Pb in rutile, U heterogeneities have important implication for U-Pb dating of rutile. ID-TIMS and LA-ICPMS dating coupled with a careful textural investigation (SEM) suggest that rutile grains are characterized by multiple path along which Pb diffusion can occur: volume diffusion is an important process, but intragrain and subgrain boundaries provide additional high diffusivity pathways for Pb escape and reduce drastically the effective diffusion length. -- La zone d'Ivrea et la zone de Strona-Ceneri, en Italie nord-occidentale et Suisse méridionale, offrent la possibilité d'étudier la croûte continentale des Alpes du Sud. En raison du haut degré métamorphique et l'abondance d'intrusions mafiques d'âge Permo-Carbonifère [complexe mafique), la zone d'Ivrea est interprétée classiquement comme de la croûte inférieure permienne. Ce travail ce concentre sur des bandes metasédimentaires (septa) incorporées dans les magmas mafiques lors de l'intrusion. Les septa forment une bande irrégulière qui coupe obliquement le complexe mafique du bas (N) vers le haut (S). La chimie des septa évolue du bas vers le haut et l'évolution chimique se rapproche de l'évolution observé dans la roche encaissante l'intrusion affecté par un événement métamorphique régionale. Cette relation suggère que le degré d'appauvrissement chimique des septa a été établit principalement lors de l'événement métamorphique régional. De plus l'incorporation dans les gabbros n'a pas perturbée la distribution stratigraphique originelle des septa. Ces deux observations impliquent que le métamorphisme dans la roche encaissante précède la mise en place du gabbro et que cette dernière ne se fait pas selon le modèle classique (« gabbro glacier » de Quick et al., 1992, 1994), mais se fait plutôt par injections répétées de sills a différentes profondeurs. Les âges U-Pb et les éléments traces des zircons suggèrent que le métamorphisme régionale a eu lieu 330-320Ma, alors que les premiers sills dans la partie profonde du Mafic Complex s'injectent à ~300Ma, le magmatisme mafique atteigne des niveaux supérieurs à 285Ma et continue localement jusqu'à 270Ma. Les âges des coeurs détritiques des zircons permettent de fixer l'âge maximale de sédimentation à ~370Ma ce qui correspond donc à l'âge maximale de l'incorporation de la zone d'Ivrea dans la croûte inférieur. L'analyse systématique des rutiles, nous a permit de montrer l'existence de plusieurs générations qui ont une répartition texturale et une chimie différente. Une génération se forme lors de l'événement UHT dans les restites, une autre génération se forme dans les liquides lors du refroidissement, au même temps qu'une partie de la première génération se rééquilibre au niveau du Zr. Localement la deuxième génération peut former des surcroissances autour de la première génération. Dans ces cas, des fortes différences en uranium entre les deux générations ont des importantes implications pour la datation U-Pb sur rutile. Classiquement les ratios Pb/U dans le rutile sont interprétés comme indiquant l'âges du refroidissement du minéral sous une température à la quelle la diffusion du Pb dans le minéral n'est plus détectable et la diffusion à plus hautes températures est assumée se faire par «volume diffusion» dans le grain (Mezger et al., 1989). Par des datations ID-TIMS (sur grain entier) et LA-ICPMS (in-situ) et une analyse texturale (MEB) approfondie nous montrons que cette supposition est trop simpliste et que le rutile est repartie en sous-domaines. Chacun de ces domaines a ça propre longueur ou chemin de diffusion spécifique. Nous proposons donc une nouvelle approche plus cohérente pour l'interprétation des âges U-Pb sur rutile.

Geographic assignment of seabirds to their origin: combining morphology, genetics and biogeochemical analyses

Longline fisheries, oil spills, and offshore wind farms are some of the major threats increasing seabird mortality at sea, but the impact of these threats on specific populations has been difficult to determine so far. We tested the use of molecular markers, morphometric measures, and stable isotope (δ15N and δ13C) and trace element concentrations in the first primary feather (grown at the end of the breeding period) to assign the geographic origin of Calonectris shearwaters. Overall, we sampled birds from three taxa: 13 Mediterranean Cory's Shearwater (Calonectris diomedea diomedea) breeding sites, 10 Atlantic Cory's Shearwater (Calonectris diomedea borealis) breeding sites, and one Cape Verde Shearwater (C. edwardsii) breeding site. Assignment rates were investigated at three spatial scales: breeding colony, breeding archipelago, and taxa levels. Genetic analyses based on the mitochondrial control region (198 birds from 21 breeding colonies) correctly assigned 100% of birds to the three main taxa but failed in detecting geographic structuring at lower scales. Discriminant analyses based on trace elements composition achieved the best rate of correct assignment to colony (77.5%). Body measurements or stable isotopes mainly succeeded in assigning individuals among taxa (87.9% and 89.9%, respectively) but failed at the colony level (27.1% and 38.0%, respectively). Combining all three approaches (morphometrics, isotopes, and trace elements on 186 birds from 15 breeding colonies) substantially improved correct classifications (86.0%, 90.7%, and 100% among colonies, archipelagos, and taxa, respectively). Validations using two independent data sets and jackknife cross-validation confirmed the robustness of the combined approach in the colony assignment (62.5%, 58.8%, and 69.8% for each validation test, respectively). A preliminary application of the discriminant model based on stable isotope δ15N and δ13C values and trace elements (219 birds from 17 breeding sites) showed that 41 Cory's Shearwaters caught by western Mediterranean long-liners came mainly from breeding colonies in Menorca (48.8%), Ibiza (14.6%), and Crete (31.7%). Our findings show that combining analyses of trace elements and stable isotopes on feathers can achieve high rates of correct geographic assignment of birds in the marine environment, opening new prospects for the study of seabird mortality at sea.

Análise de cabelo: uma revisão dos procedimentos para a determinação de elementos traço e aplicações

Aspects related to the quality of human hair analysis are presented, such as sample collection, sample preparation, determination of trace elements and application examples. Also the hair morphology, the importance of this analysis and its uses and meanings are discussed.

Intervalos de referência para elementos menores e traço em cabelo humano para a população da cidade do Rio de Janeiro - Brasil

Inductively coupled plasma mass spectrometry (ICP-MS) has been used for the determination of twenty minor and trace elements in hair samples from an urban population group (N = 1775), aiming at the establishment of reliable hair reference intervals. Statistical evaluation of the data with respect to age, sex and anatomic region was performed by multivariant analysis and according to recommendations of the International Federation of Clinical Chemistry (IFCC). The results show that mainly age and anatomic region (scalp or pubis) influence significantly the concentration of several elements. Comparison of the here calculated reference intervals with those previously published and used by clinical laboratories for this population showed larger discrepancies and the need for an urgent revision of these data.

Avaliação dos métodos de extração sequencial de Tessier, Keller e Miller na determinação de ferro nativo em três tipos de solos: orgânico, brunizem e latossolo

Sequential extraction is not totally effective to dissolve distinct forms of trace elements. The extractive solution, for example, can dissolve less of the target fraction and more than another not wished fraction. The goal of this work is to compare the extraction of native iron with three sequential extraction methods of the heavy metals, using three soils with different physical chemistry characteristics: a histosol, an oxisol, and a mollisol. The results obtained in this work demonstrate that a smaller relation soil/extractor results in a larger extraction in almost all phases. The use of many stages of the sequential extraction, with the purpose of more association of the metal with different components of the soil, can result, among other things, in modification of the substratum by the action of the reagents used, besides reducing the selectivity of the more specific extractors. Readsorption and redistribution of the heavy metals could have happened with larger intensity in the fraction where hidroxilamine was used with higher temperature. Sequential extraction of iron, without enrichment of soil samples, in the respective fractions in each method, it was important to better understand the behavior of the reagents considered specific to each form of the metal in soil.

Distribuição, fracionamento e mobilidade de elementos traço em sedimentos superficiais

The gold and iron mining activities in the Velhas River yield considerable amounts of suspended solids as well as metals to the hydrological system of the region. The risks were assessed by sequential extraction procedures. They were carried out in sediment samples, aiming to evaluate the presence of Co, Cr, Cu, Ni, Zn and As. Although being at high levels in some parts of the river (e.g. As 527 mg g-1 and Cr 475 mg g-1) they are associated with the residual fraction. Mobility factors were also calculated and show that these species are enriched along the river, e.g. for As 0.02 at the spring and 0.33 at the high course of the river.