The adherence of Pseudomonas fluorescens to marble, granite, synthetic polymers, and stainless steel

The adherence of Pseudomonas fluorescens cells to nine food-processing contact surfaces was evaluated using the plate-count method. The surfaces include marble, granite, stainless steel, polyvinyl chloride, polyurethane, and silicone-coated cloth, which have been used only in a few studies concerning bacterial adherence. The number of cells adhered to the surfaces increased with contact time reaching 5.0-6.1 log CDM.cm-2 after 10 hours, which can be considered a well established adherence process. The number of adhered cells doubled in 29.5 minutes and 23.5 minutes on stainless steel and thin polyvinyl chloride-coated cloth, respectively. For the other surfaces, this value was 9.8 minutes on average. Marble, granite, thick polyvinyl-coated cloth, double-faced rugous polyurethane, and silicone-coated cloth were not different (p < 0.05) in their ability to adhere cells (CFU/cm²) after 2 and 10 hours. The surfaces that had higher percentage of similarity in the adhesion level and higher log CFU/cm² of adhered cells were double-faced rugous polyurethane, silicone-coated cloth, and granite. The surfaces showed very different microtopography characteristics when viewed using scanning electron microscopy. This experiment showed the importance of using appropriate materials for food contact during processing, which will affect the cleaning and sanitation procedures.

Multicomponent diffusion during Prato cheese ripening: mathematical modeling using the finite element method

The partial replacement of NaCl by KCl is a promising alternative to produce a cheese with lower sodium content since KCl does not change the final quality of the cheese product. In order to assure proper salt proportions, mathematical models are employed to control the product process and simulate the multicomponent diffusion during the reduced salt cheese ripening period. The generalized Fick's Second Law is widely accepted as the primary mass transfer model within solid foods. The Finite Element Method (FEM) was used to solve the system of differential equations formed. Therefore, a NaCl and KCl multicomponent diffusion was simulated using a 20% (w/w) static brine with 70% NaCl and 30% KCl during Prato cheese (a Brazilian semi-hard cheese) salting and ripening. The theoretical results were compared with experimental data, and indicated that the deviation was 4.43% for NaCl and 4.72% for KCl validating the proposed model for the production of good quality, reduced-sodium cheeses.

Conversion of hydroxycinnamic acids into volatile phenols in a synthetic medium and in red wine by Dekkera bruxellensis

The conversion of p-coumaric acid, ferulic acid, and caffeic acid into 4-ethylphenol, 4-ethylguaiacol and 4-ethylcatechol was studied in Dekkera bruxellensis ISA 1791 under defined conditions in a synthetic medium and in a red wine. Liquid chromatography (HPLC-DAD) was used to quantify the phenolic acids, and gas chromatography (GC) coupled to a FID detector was used to quantify volatile phenols using a novel analytical methodology that does not require sample derivatization. Identification was achieved by gas chromatography-mass detection (GC-MS). The results show that phenolic acids concentration decreases while volatile phenols concentration increases. The proportion of caffeic acid taken up by Dekkera bruxellensis is lower than that for p-coumaric or ferulic acid; therefore less 4-ethylcatechol is formed. More important, 4-ethylcathecol synthesis by Dekkera bruxellensis in wine has never been demonstrated so far. These results contribute decisively to a better understanding of the origin of the volatile phenols in wines. The accumulation of these compounds in wine is nowadays regarded as one of the key factors of quality control.

Hygienic-sanitary working practices and implementation of a Hazard Analysis and Critical Control Point (HACCP) plan in lobster processing industries

This study aimed to verify the hygienic-sanitary working practices and to create and implement a Hazard Analysis Critical Control Point (HACCP) in two lobster processing industries in Pernambuco State, Brazil. The industries studied process frozen whole lobsters, frozen whole cooked lobsters, and frozen lobster tails for exportation. The application of the hygienic-sanitary checklist in the industries analyzed achieved conformity rates over 96% to the aspects evaluated. The use of the Hazard Analysis Critical Control Point (HACCP) plan resulted in the detection of two critical control points (CCPs) including the receiving and classification steps in the processing of frozen lobster and frozen lobster tails, and an additional critical control point (CCP) was detected during the cooking step of processing of the whole frozen cooked lobster. The proper implementation of the Hazard Analysis Critical Control Point (HACCP) plan in the lobster processing industries studied proved to be the safest and most cost-effective method to monitor each critical control point (CCP) hazards.

Green and brown propolis: efficient natural biocides for the control of bacterial contamination of alcoholic fermentation of distilled beverage

This study aimed to evaluate the efficiency of natural biocides, brown and green propolis, for the control of bacterial contamination in the production of sugarcane spirit. The treatments consisted of brown and green propolis extracts, ampicillin, and a control and were assessed at the beginning and end of harvest season in ten fermentation cycles. In the microbiological analyses, the lactic acid bacteria were quantified in the inoculum before and after the treatment with biocides, and the viability of yeast cells during fermentation was evaluated. The levels of acids, glycerol, total residual reducing sugars, and ethanol were analyzed for the wine resulting from each fermentation cycle. A reduction in the number of bacterial contaminants in the inoculum in the treatments with the natural biocides was observed, but it did not affect the viability of yeast cells. The control of the contaminants led to the production of higher levels of ethanol and reduced acidity in the wine produced. The results of the use of brown and green propolis to control the growth microorganisms in the fermentation of sugarcane spirit can be of great importance for using alternative strategies to synthetic antibacterials in fermentation processes including other distilled beverage or spirits.

Accelerating food safety and quality control: The use of antibody engineering techniques in the detec-tion of low-molecular weight food contaminants

The increased awareness and evolved consumer habits have set more demanding standards for the quality and safety control of food products. The production of foodstuffs which fulfill these standards can be hampered by different low-molecular weight contaminants. Such compounds can consist of, for example residues of antibiotics in animal use or mycotoxins. The extremely small size of the compounds has hindered the development of analytical methods suitable for routine use, and the methods currently in use require expensive instrumentation and qualified personnel to operate them. There is a need for new, cost-efficient and simple assay concepts which can be used for field testing and are capable of processing large sample quantities rapidly. Immunoassays have been considered as the golden standard for such rapid on-site screening methods. The introduction of directed antibody engineering and in vitro display technologies has facilitated the development of novel antibody based methods for the detection of low-molecular weight food contaminants. The primary aim of this study was to generate and engineer antibodies against low-molecular weight compounds found in various foodstuffs. The three antigen groups selected as targets of antibody development cause food safety and quality defects in wide range of products: 1) fluoroquinolones: a family of synthetic broad-spectrum antibacterial drugs used to treat wide range of human and animal infections, 2) deoxynivalenol: type B trichothecene mycotoxin, a widely recognized problem for crops and animal feeds globally, and 3) skatole, or 3-methyindole is one of the two compounds responsible for boar taint, found in the meat of monogastric animals. This study describes the generation and engineering of antibodies with versatile binding properties against low-molecular weight food contaminants, and the consecutive development of immunoassays for the detection of the respective compounds.

Perfluorattuja yhdisteitä sisältävien jätevesien puhdistus- ja analyysimenetelmät

Perfluoratut alkyyliyhdisteet eli PFAS-yhdisteet ovat synteettisiä orgaanisia yhdisteitä, joissa on fluorattu hiiliketju. Hiilen ja fluorin väliset vahvat sidokset ovat muodostuneet ongelmaksi jätevedenpuhdistamoilla, sillä yhdisteet eivät hajoa puhdistamoilla käytössä olevilla vedenpuhdistusmenetelmillä. Yhdisteitä kertyy luontoon jätevesien mukana. Kandidaatintyössä on vertailtu yhdisteitä sisältävien vesien käsittelymenetelmiä parhaiten soveltuvan menetelmän löytämiseksi. Menetelmien kustannuksia tai soveltuvuutta vedenpuhdistamomittakaavan prosessiksi ei ole arvioitu. Lisäksi työssä on koottu yhdisteitä sisältävien jätevesien analysointiin sopivia analyysimenetelmiä. Soveltuvat puhdistus- ja analyysimenetelmät on esitelty uusien tieteellisten artikkelien pohjalta. Mahdollisia erotusmenetelmiä ovat membraanierotus ja sorptio. Membraaneista soveltuvimpia ovat nanosuodatus- ja käänteisosmoosimembraanit, joilla erottuvat jopa 0,0001 μm:n kokoiset partikkelit. PFAS-yhdisteet voidaan erottaa sorptiolla muun muassa aktiivihiileen. Yhdisteiden rakenne hajoaa nykyaikaisilla hapetusmenetelmillä ja polttamalla lietteen mukana. Hapettaminen permanganaatin avulla ei tuottanut hyvää tulosta, mutta fotokemiallisella hapetuksella ja alhaisen lämpötilan plasmatekniikalla (NTP) yhdisteiden rakenne hajosi lähes kokonaan. Fotokemiallinen hapetus onnistui erityisesti perfluorokarboksyylihapoilla, joiden rakenne hajosi jopa kolmessa tunnissa. Yleisimmin käytetty analyysimenetelmä on nestekromatografin ja massaspektrometrin yhdistelmä (LC-MS/MS) ja matriisivaikutus minimoidaan tyypillisesti kiinteäfaasiuutolla (SPE). Työssä esitellyistä käsittelymenetelmistä parhaiten soveltuva on NTP-menetelmä, koska sillä saatiin tutkimusten mukaan hajotettua yhdisteiden rakenne muita menetelmiä lyhyemmässä ajassa ja se soveltuu parhaiten kaikille PFAS-yhdisteille. NTP-menetelmässä ei tarvita katalyyttiä tai lisäkemikaaleja. Voimakkaana hapettimena toimivat epästabiilit hydroksyyliradikaalit, jotka syntyvät koronapurkauksen kautta. Koronapurkauksessa muodostuu myös otsonia ja lisäksi vapaa happi voi tehostaa hapettumista. Menetelmässä muodostuvien hajoamistuotteiden hallinta vaatii lisätutkimusta. Mahdollinen hallintakeino voisi olla esimerkiksi hapettumisessa vapautuvien fluoridi-ionien saostaminen. Muodostuvien hajoamistuotteiden toksisuutta voitaisiin tarkkailla biosensorilla.

Synthetic approaches to syn-diol containing biologically active compounds /

The deoxy derivative of pancratistatin 1.10 was prepared in good yield through the use of a [4+2] Diels-Alder cycloaddition and Bischler-Napieralski cyclization approach. The Bischler-Napieralski cyclization was shown to yield two additional side products 2.9, 2.10, however, under slightly modified hydrolysis conditions, the tetracyclic product 2.11 was obtained exclusively in greater than 84% yield. Initial screening of the di-hydroxylatgd derivative, and the other complementary pair analogue 1.10' previously prepared in our laboratories gave interesting results. Both of these compounds were shown to exhibit cytostatic activity; the mono-alcohol was marginally active while the di-hydroxylated analogue proved to be more potent although one to two magnitudes less potent than pancratistatin itself Human tumour cell line assay results indicated that the di-hydroxylated derivative exhibited selective cytotoxic inhibition in the following cell lines: non-small cell lung cancer line NCI-H226 (ED50 - 0.65 ^g/mL), leukemia cell lines CCRF-CEM (ED30 = 0.55 Hg/mL) and HL-60(TB) (ED50 = 0.89^ig/mL). Our results demonstrated that the pharmacophore is not a mono-alcohol, and that the minimum pharmacophore contains the hydroxyl group at the C4 position in addition to either, or both, of the hydroxyl groups present at C2 and C3.' The minimum pharmacophore has been narrowed to only three possibilities which are current synthetic targets in several research groups. The controlled Grignard addition to the tartaric acid derived bis-Weinreb amide 1.25 afforded a direct entry to a host of 1,4-diflferentiated tartaric acid derived intermediates (2.12-2.18). This potentially usefiil methodology was demonstrated through the efficient synthesis of the naturally occurring lactone 2.23, which bears the inherent syn-dio\ subunit. Based on this result, a similar approach to the synthesis of syn-dio\ bearing natural products looks very promising? A direct 2,3-diol desymmetrization method using TIPS-triflate was shown to be effective on the selective differentiation of Z,-methyl tartrate (and diisopropyl tartrate). The mono-silyl-protected intermediates 2.31 also proved to be useful when they were selectively differentiated at the 1,4-carboxyl position (2.35, 2.36) through the use of a borohydride reducing agent. Furthermore, the mono-silyl-protected derivative underwent periodate cleavage affording two synthetically useful a,P-unsaturated esters 2.43, 2.44, with one of esters being obtained via a silyl-migration method.''

Drumming toward communitas : a case study of facilitated recreational music making and the Arthurian method

The phenomenon of communitas has been described as a moment 'in and out of time' in which a collective of individuals may be experienced by one as equal and individuated in an environment stripped of structural attributes (Turner, 1 969). In these moments, emotional bonds form and an experience of perceived 'oneness' and synergy may be described. As a result of the perceived value of these experiences, it has been suggested by Sharpe (2005) that more clearly understanding how this phenomenon may be purposefully facilitated would be beneficial for leisure service providers. Consequently, the purpose of this research endeavor was to examine the ways in which a particular leisure service provider systematically employs specific methods and sets specific parameters with the intention of guiding participants toward experiences associated with communitas or "shared spirit" as described by the organization. A qualitative case study taking a phenomenological approach was employed in order to capture the depth and complexity of both the phenomenon and the purposefiil negotiation of experiences in guiding participants toward this phenomenon. The means through which these experiences were intentionally facilitated was recreational music making in a group drumming context. As such, an organization which employs specific methods of rhythm circle facilitation as well as trains other facilitators all over the world was chosen purposely for their recognition as the most respectable and credible in this field. The specific facilitator was chosen based on high recommendation by the organization due to her level of experience and expertise. Two rhythm circles were held, and participants were chosen randomly by the facilitator. Data was collected through observation in the first circle and participant- observation in the second, as well as through focus groups with circle participants. Interviews with the facilitator were held both initially to gain broad understanding of concepts and phenomenon as well as after each circle to reflect on each circle specifically. Data was read repeatedly to drawn out patterns which emerged and were coded and organized accordingly. It was found that this specific process or system of implementation lead to experiences associated with communitas by participants. In order to more clearly understand this process and the ways in which experiences associated with communitas manifest as a result of deliberate facilitator actions, these objective facilitator actions were plotted along a continuum relating to subjective participant experiences. These findings were then linked to the literature with regards to specific characteristics of communitas. In so doing, the intentional manifestation of these experiences may be more clearly understood for ftiture facilitators in many contexts. Beyond this, findings summarized important considerations with regards to specific technical and communication competencies which were found to be essential to fostering these experiences for participants within each group. Findings surrounding the maintenance of a fluid negotiation of certain transition points within a group rhythm event overall were also highlighted, and this fluidity was found to be essential to the experience of absorption and engagement in the activity and experience. Emergent themes of structure, control, and consciousness have been presented as they manifested and were found to affect experiences within this study. Discussions surrounding the ethics and authenticity of these particular methods and their implementation has also been generated throughout. In conclusion, there was a breadth as well as depth of knowledge found in unpacking this complex process of guiding individuals toward experiences associated with communitas. The implications of these findings contribute in broadening the current theoretical as well as practical understanding as to how certain intentional parameters may be set and methods employed which may lead to experiences of communitas, and as well contribute a greater knowledge to conceptualizing the manifestation of these experiences when broken down.

Analyses, persistence an degradation of the synthetic pyrethroid insecticides permethrin and fenvalerate

Studies on persistence and degradation of the synthetic pyrethroid insecticides, permethrin and fenvalerate, were carried out under natural environmental conditions of the Niagara Peninsula. Permethrin and fenvalerate were treated on apple foliage atrat~s of 0.21 kg(AI)!ha and 0.14 kg(AI)/ha, respectively. The initial cis- and trans-permethrin spray deposits were found to be 13.5 ppm and 19.2 ppm, respectively and 38.0 ppm was observed for the fenvalerate treated sample. Twenty-three days and 84 days after spray application, permethrin residues were 4.0 ppm and 2.7 ppm for the cis-isomer, whereas they were 7.9 ppm and 4.7 ppm for the trans-isomer, respectively. Residues of fenvalerate 23 days and 84 days after spray application were 13.4 ppm and 8.0 ppm, respectively. The values of observed half-life of cis-permethrin, trans-permethrin and fenvalerate were found to be 42 days, 46 days and 51 days, respectively. Studies were extended to quantitatively determine some of the major degradation compounds of permethrin and fenvalerate, which were expected to be produced as results of ester cleavage of the parent compounds. A permethrin treated sample, 84 days after initial spray application, showed 0.25 and 0.8 ppm of cis- and trans-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylic acid (C12CA (18), respectively. These two acids were not found as free acids, but found as conjugated compounds. The other expected degradation compounds, 3-phenoxybenzyl alcohol (PBalc (~)),3-phenoxybenz.aldehyde (PBald (38)) and 2- (4-chlorophenyl) isovaleric acid (CPIA (31)) were not detected by the methods employed in this study. The results indicate that these degradation compounds were not present, or, if they were present, their concentrations were too low to detect by the methods used.

Synthetic studies on prostaglandins: "synthesis of a new thia-PGEI analog"

A PGE1 analog, namely (±)-trans-2-(6'-carbomethoxyhexyl)-3- (E-3"-thia-1 "-octene)-4-hydroxycyclopentanone 71, has been prepared for the first time. Towards the synthesis of this compound, several synthetic approaches aimed at the preparation of the required acetylenic and E-halovinylic sulfides as building blocks were investigated. Among all the methods examined, it appeared evident that the best route to ethynyl n.pentyl sulfide 81 is via a double dehydrohalogenation of the corresponding 1,2-dibromoethyl sulfide with sodium amide in liquid ammonia. In addition, the isomerically pure E-2-iodoethenyl n.pentyl sulfide 85 is conveniently prepared in high yield and stereoselectivity by hydrozirconation-iodination of the terminal ethynyl sulfide 81. The classical hydroalumination and hydroboration reactions for the preparation of vinyl halides from alkynes gave only small yields when applied as methods towards the synthesis of 85 . The building block 2-(6'-carbomethoxyhexyl)-4-hydroxy-2- cyclopentenone (±)-1 carrying the upper side-chain of prostaglandin E 1 was prepared by a step-wise synthesis involving transformations of compounds possessing the required carbocyclic framework (see scheme 27). The synthesis proved to be convenient and gave a good overall yield of (±)-1 which was protected as the TH P-derivative 37 or the siloxy derivative 38. With the required building blocks 81 and 37 in hand, the target 1S-thia-PGE1 analog (±)-71 was prepared via the in situ higher cuprate formation-conjugate addition reaction. This method proved to be convenient and stereospecific. The standard cuprate method, involving an organocuprate reagent generated from an isolated vinyl iodide, did not work well in our case and gave a complicated mixture of products. The target compound will be submitted for assessment of bio log ical activity.

The Effect of a Stickhandling and Puck Control (SPC) Training Intervention on SPC Skills and Wrist Shot Performance Variables in Female Collegiate Ice Hockey Players

The purpose of the study was to investigate the effect of a 16 session stickhandling and puck control (SPC) off-ice training intervention on SPC skills and wrist shot performance variables. Eighteen female collegiate ice hockey players participated in a crossover design training intervention, whereby players were randomly assigned to two groups. Each group completed 16 SPC training sessions in two conditions [normal vision (NV) and restricted vision (RV)]. Measures obtained after the training intervention revealed significant improvements in SPC skills and wrist shot accuracy. Order of training condition did not reach significance, meaning that SPC improvement occurred as a result of total training volume as opposed to order of training condition. However, overall changes in the RV-NV condition revealed consistently higher effect sizes, meaning a greater improvement in performance. Therefore, support can be provided for this technical approach to SPC training and an alternative method of challenging SPC skills.

Étude des interactions protéiques impliquant NPM-MLF1 dans la leucémie myéloïde aiguë.

Différentes translocations génomiques sont fréquemment associées à l'apparition de leucémies myéloïdes aiguës (LMA). Ces translocations génomiques résultent de l’assemblage de deux gènes conduisant à la production d'une protéine de fusion. C'est le cas de la translocation t (3; 5) (q25.1; q34) impliquant le suppresseur tumoral NPM et l'oncogène MLF1 donnant naissance à la protéine de fusion NPM-MLF1. Généralement, les gènes impliqués dans ces translocations contrôlent la croissance cellulaire, la différenciation ou la survie cellulaire. Cependant, pour NPM-MLF1 les causes du gain ou de la perte de fonction associée à la translocation demeurent inconnues car nous ne savons pas comment cette translocation peut favoriser ou participer à l'avènement de la LMA. Le but de ce travail est d’analyser le rôle de NPM-MLF1 dans le cancer et d’examiner comment son activité contribue à la leucémie en faisant des études d’interactions protéine/protéine. En effet, l’étude de la fonction d’une protéine implique souvent de connaître ses partenaires d’interactions. Pour ce faire, la technique de double hybride dans la souche de levure AH109 a été utilisée. Tout d’abord, les ADN complémentaires (ADNc) de MLF1, NPM1 et de NPM-MLF1, MLF1-Like (une partie de MLF1 de l’acide aminé 94 à 157) normaux et mutés du domaine MTG8-Like constitué des acides aminés (a.a.) 151 à 164 de MLF1 (excepté NPM) ont été clonés dans un vecteur d'expression de levure pGBKT7. Les ADNc de GFI-1, mSin3A, PLZF, HDAC1 et HDAC3 ont été clonés dans le plasmide pGADT7 de façon à créer des protéines de fusion synthétiques avec le domaine de liaison à l'ADN et de trans-activation de la protéine GAL4. Le plasmide pGBKT7 possède un gène TRP1 et pGADT7 un gène LEU2 qui permettent la sélection des clones insérés dans la levure. Aussi, le pGBKT7 a un épitope c-myc et pGADT7 un épitope HA qui permet de voir l’expression des protéines par buvardage de type Western. Après la transformation des levures les interactions protéine/protéine ont été observées en vérifiant l’expression des gènes rapporteurs HIS3, LacZ, MEL1, ADE2 de la levure en utilisant des milieux de sélection YPD/-Leu/-Trp, YPD/-Leu/-Trp/-His, YPD/-Leu/-Trp/-His/-Ade, YPD/-Leu/-Trp/+ X-Gal, YPD/-Leu/-Trp/ + X-α-Gal. Ensuite, les interactions trouvées par double-hybride ont été vérifiées dans les cellules érythroleucémiques K562 par immuno-précipitation (IP) de protéines suivies de buvardages Westerns avec les anticorps appropriés. NPM-MLF1, MLF1, MTG8, MLF1-Like surexprimés dans les cellules K562 ont été clonés dans le plasmide pOZ-FH-N. pOZ-FH-N possède un récepteur IL-2 qui permet de sélectionner les cellules qui l’expriment ainsi qu’un tag Flag-HA qui permet de voir l’expression des protéines par buvardage-Western. Les résultats du double-hybride suggèrent une interaction faible de NPM-MLF1 avec HDAC1, HDAC3 et mSin3A ainsi qu’une interaction qui semble plus évidente entre NPM-MLF1 et PLZF, GFI-1. NPM interagit avec GFI-1 et mSin3A. Aussi, MLF1 et MLF1-Like interagissent avec HDAC1, HDAC3, GFI-1, PLZF mais pas avec mSin3A. Les IP suggèrent que NPM-MLF1 interagit avec HDAC1, HDAC3, mSin3A et PLZF. MLF1 et MLF1-Like interagissent avec HDAC1, HDAC3 et mSin3A. L’interaction de NPM-MLF1 avec GFI-1, MLF1 et MLF1-Like avec PLZF et GFI-1 n’a pas encore été vérifiée par IP. Ainsi, nos observations permettent de suggérer que NPM-MF1, MLF1 et NPM pourraient jouer un rôle dans la transcription et la régulation de l’expression de certains gènes importants dans l’hématopoïèse et une variété de processus cellulaires parce qu’ils interagissent avec différents corépresseurs. En déterminant les partenaires protéiques de MLF1, NPM et NPM-MLF1, leurs fonctions et comment NPM-MLF1 influence et modifie le fonctionnement cellulaire normal; il sera possible de renverser le processus de LMA favorisé par la t (3; 5) NPM-MLF1 par la technologie d’interférence à l’ARN.

New statistical methods to assess the effect of time-dependent exposures in case-control studies

Contexte. Les études cas-témoins sont très fréquemment utilisées par les épidémiologistes pour évaluer l’impact de certaines expositions sur une maladie particulière. Ces expositions peuvent être représentées par plusieurs variables dépendant du temps, et de nouvelles méthodes sont nécessaires pour estimer de manière précise leurs effets. En effet, la régression logistique qui est la méthode conventionnelle pour analyser les données cas-témoins ne tient pas directement compte des changements de valeurs des covariables au cours du temps. Par opposition, les méthodes d’analyse des données de survie telles que le modèle de Cox à risques instantanés proportionnels peuvent directement incorporer des covariables dépendant du temps représentant les histoires individuelles d’exposition. Cependant, cela nécessite de manipuler les ensembles de sujets à risque avec précaution à cause du sur-échantillonnage des cas, en comparaison avec les témoins, dans les études cas-témoins. Comme montré dans une étude de simulation précédente, la définition optimale des ensembles de sujets à risque pour l’analyse des données cas-témoins reste encore à être élucidée, et à être étudiée dans le cas des variables dépendant du temps. Objectif: L’objectif général est de proposer et d’étudier de nouvelles versions du modèle de Cox pour estimer l’impact d’expositions variant dans le temps dans les études cas-témoins, et de les appliquer à des données réelles cas-témoins sur le cancer du poumon et le tabac. Méthodes. J’ai identifié de nouvelles définitions d’ensemble de sujets à risque, potentiellement optimales (le Weighted Cox model and le Simple weighted Cox model), dans lesquelles différentes pondérations ont été affectées aux cas et aux témoins, afin de refléter les proportions de cas et de non cas dans la population source. Les propriétés des estimateurs des effets d’exposition ont été étudiées par simulation. Différents aspects d’exposition ont été générés (intensité, durée, valeur cumulée d’exposition). Les données cas-témoins générées ont été ensuite analysées avec différentes versions du modèle de Cox, incluant les définitions anciennes et nouvelles des ensembles de sujets à risque, ainsi qu’avec la régression logistique conventionnelle, à des fins de comparaison. Les différents modèles de régression ont ensuite été appliqués sur des données réelles cas-témoins sur le cancer du poumon. Les estimations des effets de différentes variables de tabac, obtenues avec les différentes méthodes, ont été comparées entre elles, et comparées aux résultats des simulations. Résultats. Les résultats des simulations montrent que les estimations des nouveaux modèles de Cox pondérés proposés, surtout celles du Weighted Cox model, sont bien moins biaisées que les estimations des modèles de Cox existants qui incluent ou excluent simplement les futurs cas de chaque ensemble de sujets à risque. De plus, les estimations du Weighted Cox model étaient légèrement, mais systématiquement, moins biaisées que celles de la régression logistique. L’application aux données réelles montre de plus grandes différences entre les estimations de la régression logistique et des modèles de Cox pondérés, pour quelques variables de tabac dépendant du temps. Conclusions. Les résultats suggèrent que le nouveau modèle de Cox pondéré propose pourrait être une alternative intéressante au modèle de régression logistique, pour estimer les effets d’expositions dépendant du temps dans les études cas-témoins

De l'organisation au déroulement d'événements rave à Montréal : étude des mécanismes de régulation sociale

Les raves sont des événements festifs dédiés à la musique techno et à la danse qui se distinguent des autres lieux de rassemblement tels que les bars et les discothèques notamment par le fait qu’ils se déroulent toute la nuit dans un lieu aménagé pour l’occasion et qu’il n’y a généralement pas de vente d’alcool. La consommation de drogues de synthèse telles que l’ecstasy et les speeds y est toutefois largement répandue. La tenue de ces rassemblements pose une série de problèmes du point de vue des autorités policières, tels que la présence de trafiquants de drogues ainsi que la sécurité des lieux où se déroulent les raves. Dans le contexte particulier de ces événements, les pratiques de contrôle social sont soumises à un certain nombre d’ambiguïtés. Le but général de l’étude est de permettre une compréhension de la façon dont se déterminent et s’appliquent les règles qui visent à encadrer la tenue de ce type de rassemblements. Trois objectifs spécifiques sont poursuivis, soit 1) de comprendre comment on a tenté de réguler ce type d’événements à Montréal, 2) de comprendre comment les différents acteurs responsables de l’organisation et du bon déroulement des événements établissent une série de règles, aussi bien formelles qu’informelles, et négocient leur application dans le cadre de leur pratique, et 3) de comprendre comment ces acteurs identifient certaines situations comme constituant un problème et éventuellement, y réagissent. La principale méthode de recueil des données a consisté à réaliser des entretiens semi-dirigés avec des promoteurs d’événements rave, des agents de sécurité ainsi que d’autres personnes impliquées dans le milieu telles que policier, pompier, artistes de la scène rave et intervenants. L’observation participante lors d’événements rave fut utilisée comme méthode complémentaire. L’étude démontre comment le service de police s’est vu confronté avec les raves à un vide juridique et comment l’encadrement de ce type d’événements s’est plutôt exercé par le service de prévention des incendies. Les autorités ont également tenté d’encadrer le phénomène par des modifications à certaines règlementations, dont celles sur les permis d’alcool. L’étude démontre également de quelle manière et en fonction de quoi les différents acteurs du milieu négocient les règles en cours d’action dans un contexte où la frontière entre le licite et l’illicite est floue.