825 resultados para Strain-gage
Resumo:
Pressure–Temperature–time (P–T–t) estimates of the syn-kinematic strain at the peak-pressure conditions reached during shallow underthrusting of the Briançonnais Zone in the Alpine subduction zone was made by thermodynamic modelling and 40Ar/39Ar dating in the Plan-de-Phasy unit (SE of the Pelvoux Massif, Western Alps). The dated phengite minerals crystallized syn-kinematically in a shear zone indicating top-to-the-N motion. By combining X-ray mapping with multi-equilibrium calculations, we estimate the phengite crystallization conditions at 270 ± 50 °C and 8.1 ± 2 kbar at an age of 45.9 ± 1.1 Ma. Combining this P–T–t estimate with data from the literature allows us to constrain the timing and geometry of Alpine continental subduction. We propose that the Briançonnais units were scalped on top of the slab during ongoing continental subduction and exhumed continuously until collision.
Resumo:
We sequenced the complete genome of the bovine viral diarrhea virus (BVDV) strain Carlito. It belongs to the subgenotype 1e that is described in Europe only and represents the second most prevalent subgenotype in Switzerland. This is the first report of a full-length sequence of BVDV-1e.
Resumo:
Aeromonas salmonicida subsp. salmonicida is the causal agent of furunculosis in salmonids. We recently identified a group of genomic islands (AsaGEI) in this bacterium. AsaGEI2a, one of these genomic islands, has almost exclusively been identified in isolates from North America. To date, Aeromonas salmonicida subsp. salmonicida JF3224, a strain isolated from a wild brown trout (Salmo trutta) caught in Switzerland, was the only European isolate that appeared to bear AsaGEI2a. We analyzed the genome of JF3224 and showed that the genomic island in JF3224 is a new variant of AsaGEI, which we have called AsaGEI2b. While AsaGEI2b shares the same integrase gene and insertion site as AsaGEI2a, it is very different in terms of many other features. Additional genomic investigations combined with PCR genotyping revealed that JF3224 is sensitive to growth at 25°C, leading to insertion sequence-dependent rearrangement of the locus on the pAsa5 plasmid that encodes a type three secretion system, which is essential for the virulence of the bacterium. The analysis of the JF3224 genome confirmed that AsaGEIs are accurate indicators of the geographic origins of A. salmonicida subsp. salmonicida isolates and is another example of the susceptibility of the pAsa5 plasmid to DNA rearrangements.
Resumo:
Puumala virus (PUUV) is one of the predominant hantavirus species in Europe causing mild to moderate cases of haemorrhagic fever with renal syndrome. Parts of Lower Saxony in north-western Germany are endemic for PUUV infections. In this study, the complete PUUV genome sequence of a bank vole-derived tissue sample from the 2007 outbreak was determined by a combined primer-walking and RNA ligation strategy. The S, M and L genome segments were 1,828, 3,680 and 6,550 nucleotides in length, respectively. Sliding-window analyses of the nucleotide sequences of all available complete PUUV genomes indicated a non-homogenous distribution of variability with hypervariable regions located at the 3′-ends of the S and M segments. The overall similarity of the coding genome regions to the other PUUV strains ranged between 80.1 and 84.7 % at the level of the nucleotide sequence and between 89.5 and 98.1 % for the deduced amino acid sequences. In comparison to the phylogenetic trees of the complete coding sequences, trees based on partial segments revealed a general drop in phylogenetic support and a lower resolution. The Astrup strain S and M segment sequences showed the highest similarity to sequences of strains from geographically close sites in the Osnabrück Hills region. In conclusion, a primer-walking-mediated strategy resulted in the determination of the first complete nucleotide sequence of a PUUV strain from Central Europe. Different levels of variability along the genome provide the opportunity to choose regions for analyses according to the particular research question, e.g., large-scale phylogenetics or within-host evolution.
Resumo:
Repeated treatment with psychostimulants produces behavioral sensitization that results in increased locomotor responses so that lower drug doses are required to obtain the same effect and cross-sensitization with other stimulants. Methylphenidate (MPD; Ritalin) is most frequently prescribed to treat children having attention deficit hyperactivity disorder (ADHD), a syndrome with onset in childhood characterized by high levels of inattention, hyperactivity, and impulsivity. Little is known of the consequences involving the long-term use of MPD as treatment for ADHD. This study investigates if there are age, genetic/strain, and sex differences in the prolonged exposure to MPD and cross-sensitization with amphetamine. The objective is to determine whether (a) early exposure to MPD in adolescent rats increases their sensitivity to the drug when they are adult rats, (b) there are strain and sex differences in the response to MPD, and (c) treatment with MPD in adolescent and adult Wistar-Kyoto (WKY), spontaneously hyperactive/hypertensive rat (SHR), and Sprague-Dawley (SD) rat results in cross-sensitization with amphetamine. The hypotheses are that (1) early exposure to MPD in adolescent rats increases their sensitivity to the drug when they reach adulthood, and that this hypersensitivity is dose-, strain-, and sex-dependent and (2) adult rats treated with MPD as adolescents will show a greater cross-sensitization to amphetamine than those adult rats treated with saline as adolescents, and that this cross-sensitization is dose-, strain-, and sex-dependent. The study consists of recording and evaluating locomotor activity of female and male WKY, SHR, and SD rats before and after acute and repeated MPD administration when these rats are young and as adults follows by an amphetamine treatment. Results showed that repeated treatment with MPD elicited behavioral sensitization and cross-sensitization with amphetamine in these animals. The study also found that strain and sex play a crucial role in the differentiated sensitivity to the acute and chronic effects of MPD. The development of behavioral sensitization and cross-sensitization are also dependent on the dose of MPD and the age of the rat. ^
Resumo:
Naturally occurring genetic variants confer susceptibility to disease in the human population, including in testicular germ cell tumor development. Disease susceptibility loci for testicular germ cell tumors have been identified by genetic mapping in humans and mice. However, the identity of many of the susceptibility genes remains unclear. My study utilized a chromosome substitution strain, the 129.MOLF-Chr 19 (or M19 strain), to identify candidate testicular germ cell tumor susceptibility genes. Males of this strain have a high incidence of germ cell tumors in the testes. By forward genetic approaches, five susceptibility loci were fine-mapped and the genetic interactions were dissected. In addition, I identified three protein-coding genes and one micro-RNA as testicular tumor susceptibility genes by genomic screening. Using reverse genetic approaches, I verified one of the candidates, Splicing factor 1, as a modifier of testicular tumor. Deficiency of SF1 significantly reduces the incidence of testicular tumors in mice. This study highlights the advantage of the 129.MOLF-Chr 19 consomic strain in disease gene identification and validation. It also sets the stage to elucidate the molecular mechanisms of tumorigenesis in the testis. ^
Resumo:
The effect of circadian variation on susceptibility to the chemical induction of cancer was assessed utilizing the mouse pulmonary adenoma bioassay. Different groups of male A/Jax mice (standardized for rhythm analysis with light from 0600-1800 and darkness from 1800-0600) each received a single timed i.p. injection of urethan (Bioassay I: 0.25, 0.5 or 1.0 mg/g body weight; Bioassay II: 0.75, 1.0, 1.25 mg/g body weight; Bioassay III: 1.0 mg/g body weight) at the following times, 0100, 0500, 0900, 1300, 1700 or 2100. Mice were sacrificed 16 weeks after treatment. The tumorigenic effect of urethan on the lungs (lung surface pulmonary adenomas) was assessed. In addition, mortality, body weight changes and the anesthetic effect of urethan were determined. The rhythmic pattern of DNA synthesis in the lung and the comparative rhythmic pattern in the liver were assessed using a tritiated thymidine incorporation assay.^ In the first adenoma bioassay, the lung tumorigenic response in mice given the highest dose of urethan exhibited a 12-hour rhythm with a major peak in tumor yield at 0100 and a secondary peak at 1300; reduced yields occurred at 0500-0900 and 2100. The second adenoma bioassay, studied at a 6-month seasonal divergence in time from the first study showed a peak at 1300 but not at 0100. The mice from the third adenoma bioassay, studied at an 11-month seasonal divergence in time from the 2nd study showed an increase in tumor yield during the rest cycle (0900-1700).^ This study found a definite suggestion of a low amplitude rhythm in susceptibility to urethan induced effects. The acute toxic and pharmacological effects correlated to exhibit a maximal effect during dark hours (activity span). This rhythmicity might be explained by an alteration in the amplitude of hepatic metabolism. The chronic carcinogenic response exhibited an opposite pattern. Urethan induced tumor response was greater during daylight hours (rest cycle). This correlated with the slight elevation in DNA synthetic activity found in the lung and liver which might be responsible for the increase in carcinogenic response. (Abstract shortened with permission of author.) ^
Resumo:
Objectives. To examine the association between prior rifamycin exposure and later development of C. difficile infection (CDI) caused by a rifamycin-resistant strain of C. difficile , and to compare patient characteristics between rifamycin-resistant strains of C. difficile infection and rifamycin-susceptible strains of C. difficile infection. ^ Methods. A case-control study was performed in a large university-affiliated hospital in Houston, Texas. Study subjects were patients with C. difficile infection acquired at the hospital with culture-positive isolates of C. difficile with which in vitro rifaximin and rifampin susceptibility has been tested. Prior use of rifamycin, demographic and clinical characteristics was compared between case and control groups using univariate statistics. ^ Results. A total of 49 C. difficile strains met the study inclusion criteria for rifamycin-resistant case isolates, and a total of 98 rifamycin-susceptible C. difficile strains were matched to case isolates. Of 49 case isolates, 12 (4%) were resistant to rifampin alone, 12 (4%) were resistant to rifaximin alone, and 25 (9%) were resistant to both rifampin and rifaximin. There was no significant association between prior rifamycin use and rifamycin-resistant CDI. Cases and controls did not differ according to demographic characteristics, length of hospital stay, known risk factors of CDI, type of CDI-onset, and pre-infection medical co-morbidities. Our results on 37 rifaximin-resistant isolates (MIC ≥32 &mgr;g/ml) showed more than half of isolates had a rifaximin MIC ≥256 &mgr;g/ml, and out of these isolates, 19 isolates had MICs ≥1024 &mgr;g/ml. ^ Conclusions. Using a large series of rifamycin-non-susceptible isolates, no patient characteristics were independently associated with rifamycin-resistant CDI. This data suggests that factors beyond previous use of rifamycin antibiotics are primary risk factors for rifamycin-resistant C. difficile. ^
Resumo:
A torque meter comprising hollow-keyed, input and output female shafts adapted to receive the male shafts of the power source and machine respectively. Each shaft has a circular flange whose face is perpendicular to the center line of the shafts. Each flange has a plurality of equally spaced cylindrical recesses machined into the inside face thereto adapted to receive conical inserts therein. Balls are contained by the conical inserts and transmit the rotational movement from the input to the output shaft. A stationary housing extends around the input and output shaft and has a transducer shell secured thereto. When force is applied to the input shaft to cause movement, the balls encounter torsional resistance which causes the balls to roll up the ramps of the conical seat inserts to separate the two torque flanges. The force transmitted through the balls causes rotation to the output shaft and produces tension to the stationary transducer shell. The stationary transducer shell is instrumented with semi-conductor strain gauges.
Resumo:
A knowledge of rock stress is fundamental for improving our understanding of oceanic crustal mechanisms and lithospheric dynamic processes. However, direct measurements of stress in the deep oceans, and in particular stress magnitudes, have proved to be technically difficult. Anelastic strain recovery measurements were conducted on 15 basalt core samples from Sites 765 and 766 during Leg 123. Three sets of experiments were performed: anelastic strain recovery monitoring, dynamic elastic property measurements, and thermal azimuthal anisotropy observations. In addition, a range of other tests and observations were recorded to characterize each of the samples. One common feature of the experimental results and observations is that apparently no consistent orientation trend exists, either between the different measurements on each core sample or between the same sets of measurements on the various core samples. However, some evidence of correspondence between velocity anisotropy and anelastic strain recovery exists, but this is not consistent for all the core samples investigated. Thermal azimuthal anisotropy observations, although showing no conclusive correlations with the other results, were of significant interest in that they clearly exhibited anisotropic behavior. The apparent reproducibility of this behavior may point toward the possibility of rocks that retain a "memory" of their stress history, which could be exploited to derive stress orientations from archived core. Anelastic strain recovery is a relatively new technique. Because use of the method has extended to a wider range of rock types, the literature has begun to include examples of rocks that contracted with time. Strong circumstantial evidence exists to suggest that core-sample contractions result from the slow diffusion of pore fluids from a preexisting microcrack structure that permits the rock to deflate at a greater rate than the expansion caused by anelastic strain recovery. Both expansions and contractions of the Leg 123 cores were observed. The basalt cores have clearly been intersected by an abundance of preexisting fractures, some of which pass right through the samples, but many are intercepted or terminate within the rock matrix. Thus, the behavior of the core samples will be influenced not only by the properties of the rock matrix between the fractures, but also by how these macro- and micro-scale fractures mutually interact. The strain-recovery curves recorded during Leg 123 for each of the 15 basalt core samples may reflect the result of two competing time dependent processes: anelastic strain recovery and pore pressure recovery. Were these the only two processes to influence the gauge responses, then one might expect that given the additional information required, established theoretical models might be used to determine consistent stress orientations and reliable stress magnitudes. However, superimposed upon these competing processes is their respective interaction with the preexisting fractures that intersect each core. Evidence from our experiments and observations suggests that these fractures have a dominating influence on the characteristics of the recovery curves and that their effects are complex.
Resumo:
Fast-flowing ice streams discharge most of the ice from the interior of the Antarctic Ice Sheet coastward. Understanding how their tributary organisation is governed and evolves is essential for developing reliable models of the ice sheet's response to climate change. Despite much research on ice-stream mechanics, this problem is unsolved, because the complexity of flow within and across the tributary networks has hardly been interrogated. Here I present the first map of planimetric flow convergence across the ice sheet, calculated from satellite measurements of ice surface velocity, and use it to explore this complexity. The convergence map of Antarctica elucidates how ice-stream tributaries draw ice from the interior. It also reveals curvilinear zones of convergence along lateral shear margins of streaming, and abundant convergence ripples associated with nonlinear ice rheology and changes in bed topography and friction. Flow convergence on ice-stream tributaries and their feeding zones is markedly uneven, and interspersed with divergence at distances of the order of kilometres. For individual drainage basins as well as the ice sheet as a whole, the range of convergence and divergence decreases systematically with flow speed, implying that fast flow cannot converge or diverge as much as slow flow. I therefore deduce that flow in ice-stream networks is subject to mechanical regulation that limits flow-orthonormal strain rates. These properties and the gridded data of convergence and flow-orthonormal strain rate in this archive provide targets for ice- sheet simulations and motivate more research into the origin and dynamics of tributarization.