A study of the top executive conference centers in the United States and an examination of the corresponding corporate meetings market

Introduction: The United States today has become "meeting-conscious." The complexity of conducting business has led to the need for sophisticated coordination of decision-making processes on all levels of the organization. Company meetings have played an increasingly important role in the success and future of many companies. Strategies and decisions are developed at meetings that can determine future policies of crucial importance. Executive training can mean the difference in whether the company will even survive. Large and growing companies have increased their off-premise meeting budgets annually in spite of the state of the economy. however, the rising costs of travel and lodging have made management monitor these budgets more closely than ever. Thus, the need to use every dollar efficiently has compelled companies to examine newer methods of running meetings and alternatives to the usage of typical off-premise meeting facilities. The importance of off-premise meetings in the United States economy has greatly increased due to the billions of dollars spent annually. These factors make it vital to explore the effectiveness of time and monetary expenditures. Up until the mid-1960's, company meetings were held in facilities of various design and purpose, none of which were specifically designed for the small to medium corporate meeting. Upon gathering information concerning the meetings market and the corporate meeting planner, certain individuals endeavored to change the situation. This study is designed to investigate this new concept, which will hereafter be referred to as "conference center." For the purpose of this study, the following two definitions will be used. 1. Conference center - that meeting facility primarily marketing its facilities for the small to medium-sized corporate meeting. The center is operated by specialists aware of market needs in as much detail as are those people working for the company involved. On-premise sleeping rooms are not mandatory provided such facilities are within easy access. 2. Meeting planner - that person within an organization who has primary responsibility for arranging off-premise meetings and all other related items necessary for meeting effectiveness. This person may spend anywhere from 10 to 100l of his time in this capacity. The conference center has effectively satisfied the need for specialized corporate meeting facilities. This study will show the depth of the corporate meetings market and trace the growth and development of this relatively new conference center concept. Information will also be compiled on the top centers in the country. It is hoped that by presenting this research meeting planners will become more aware of the nature and location of these centers, especially for use by the small to medium-sized company. Such exposure of the centers will hopefully increase existing demand and enable the construction of new, innovative centers.

Testing of Interposer-Based 2.5D Integrated Circuits

The unprecedented and relentless growth in the electronics industry is feeding the demand for integrated circuits (ICs) with increasing functionality and performance at minimum cost and power consumption. As predicted by Moore's law, ICs are being aggressively scaled to meet this demand. While the continuous scaling of process technology is reducing gate delays, the performance of ICs is being increasingly dominated by interconnect delays. In an effort to improve submicrometer interconnect performance, to increase packing density, and to reduce chip area and power consumption, the semiconductor industry is focusing on three-dimensional (3D) integration. However, volume production and commercial exploitation of 3D integration are not feasible yet due to significant technical hurdles.

At the present time, interposer-based 2.5D integration is emerging as a precursor to stacked 3D integration. All the dies and the interposer in a 2.5D IC must be adequately tested for product qualification. However, since the structure of 2.5D ICs is different from the traditional 2D ICs, new challenges have emerged: (1) pre-bond interposer testing, (2) lack of test access, (3) limited ability for at-speed testing, (4) high density I/O ports and interconnects, (5) reduced number of test pins, and (6) high power consumption. This research targets the above challenges and effective solutions have been developed to test both dies and the interposer.

The dissertation first introduces the basic concepts of 3D ICs and 2.5D ICs. Prior work on testing of 2.5D ICs is studied. An efficient method is presented to locate defects in a passive interposer before stacking. The proposed test architecture uses e-fuses that can be programmed to connect or disconnect functional paths inside the interposer. The concept of a die footprint is utilized for interconnect testing, and the overall assembly and test flow is described. Moreover, the concept of weighted critical area is defined and utilized to reduce test time. In order to fully determine the location of each e-fuse and the order of functional interconnects in a test path, we also present a test-path design algorithm. The proposed algorithm can generate all test paths for interconnect testing.

In order to test for opens, shorts, and interconnect delay defects in the interposer, a test architecture is proposed that is fully compatible with the IEEE 1149.1 standard and relies on an enhancement of the standard test access port (TAP) controller. To reduce test cost, a test-path design and scheduling technique is also presented that minimizes a composite cost function based on test time and the design-for-test (DfT) overhead in terms of additional through silicon vias (TSVs) and micro-bumps needed for test access. The locations of the dies on the interposer are taken into consideration in order to determine the order of dies in a test path.

To address the scenario of high density of I/O ports and interconnects, an efficient built-in self-test (BIST) technique is presented that targets the dies and the interposer interconnects. The proposed BIST architecture can be enabled by the standard TAP controller in the IEEE 1149.1 standard. The area overhead introduced by this BIST architecture is negligible; it includes two simple BIST controllers, a linear-feedback-shift-register (LFSR), a multiple-input-signature-register (MISR), and some extensions to the boundary-scan cells in the dies on the interposer. With these extensions, all boundary-scan cells can be used for self-configuration and self-diagnosis during interconnect testing. To reduce the overall test cost, a test scheduling and optimization technique under power constraints is described.

In order to accomplish testing with a small number test pins, the dissertation presents two efficient ExTest scheduling strategies that implements interconnect testing between tiles inside an system on chip (SoC) die on the interposer while satisfying the practical constraint that the number of required test pins cannot exceed the number of available pins at the chip level. The tiles in the SoC are divided into groups based on the manner in which they are interconnected. In order to minimize the test time, two optimization solutions are introduced. The first solution minimizes the number of input test pins, and the second solution minimizes the number output test pins. In addition, two subgroup configuration methods are further proposed to generate subgroups inside each test group.

Finally, the dissertation presents a programmable method for shift-clock stagger assignment to reduce power supply noise during SoC die testing in 2.5D ICs. An SoC die in the 2.5D IC is typically composed of several blocks and two neighboring blocks that share the same power rails should not be toggled at the same time during shift. Therefore, the proposed programmable method does not assign the same stagger value to neighboring blocks. The positions of all blocks are first analyzed and the shared boundary length between blocks is then calculated. Based on the position relationships between the blocks, a mathematical model is presented to derive optimal result for small-to-medium sized problems. For larger designs, a heuristic algorithm is proposed and evaluated.

In summary, the dissertation targets important design and optimization problems related to testing of interposer-based 2.5D ICs. The proposed research has led to theoretical insights, experiment results, and a set of test and design-for-test methods to make testing effective and feasible from a cost perspective.

Theory and Practice in Sustainability Science: Influence of Urban Form on the Urban Heat Island and Implications for Urban Systems

As the world population continues to grow past seven billion people and global challenges continue to persist including resource availability, biodiversity loss, climate change and human well-being, a new science is required that can address the integrated nature of these challenges and the multiple scales on which they are manifest. Sustainability science has emerged to fill this role. In the fifteen years since it was first called for in the pages of Science, it has rapidly matured, however its place in the history of science and the way it is practiced today must be continually evaluated. In Part I, two chapters address this theoretical and practical grounding. Part II transitions to the applied practice of sustainability science in addressing the urban heat island (UHI) challenge wherein the climate of urban areas are warmer than their surrounding rural environs. The UHI has become increasingly important within the study of earth sciences given the increased focus on climate change and as the balance of humans now live in urban areas.

In Chapter 2 a novel contribution to the historical context of sustainability is argued. Sustainability as a concept characterizing the relationship between humans and nature emerged in the mid to late 20th century as a response to findings used to also characterize the Anthropocene. Emerging from the human-nature relationships that came before it, evidence is provided that suggests Sustainability was enabled by technology and a reorientation of world-view and is unique in its global boundary, systematic approach and ambition for both well being and the continued availability of resources and Earth system function. Sustainability is further an ambition that has wide appeal, making it one of the first normative concepts of the Anthropocene.

Despite its widespread emergence and adoption, sustainability science continues to suffer from definitional ambiguity within the academe. In Chapter 3, a review of efforts to provide direction and structure to the science reveals a continuum of approaches anchored at either end by differing visions of how the science interfaces with practice (solutions). At one end, basic science of societally defined problems informs decisions about possible solutions and their application. At the other end, applied research directly affects the options available to decision makers. While clear from the literature, survey data further suggests that the dichotomy does not appear to be as apparent in the minds of practitioners.

In Chapter 4, the UHI is first addressed at the synoptic, mesoscale. Urban climate is the most immediate manifestation of the warming global climate for the majority of people on earth. Nearly half of those people live in small to medium sized cities, an understudied scale in urban climate research. Widespread characterization would be useful to decision makers in planning and design. Using a multi-method approach, the mesoscale UHI in the study region is characterized and the secular trend over the last sixty years evaluated. Under isolated ideal conditions the findings indicate a UHI of 5.3 ± 0.97 °C to be present in the study area, the magnitude of which is growing over time.

Although urban heat islands (UHI) are well studied, there remain no panaceas for local scale mitigation and adaptation methods, therefore continued attention to characterization of the phenomenon in urban centers of different scales around the globe is required. In Chapter 5, a local scale analysis of the canopy layer and surface UHI in a medium sized city in North Carolina, USA is conducted using multiple methods including stationary urban sensors, mobile transects and remote sensing. Focusing on the ideal conditions for UHI development during an anticyclonic summer heat event, the study observes a range of UHI intensity depending on the method of observation: 8.7 °C from the stationary urban sensors; 6.9 °C from mobile transects; and, 2.2 °C from remote sensing. Additional attention is paid to the diurnal dynamics of the UHI and its correlation with vegetation indices, dewpoint and albedo. Evapotranspiration is shown to drive dynamics in the study region.

Finally, recognizing that a bridge must be established between the physical science community studying the Urban Heat Island (UHI) effect, and the planning community and decision makers implementing urban form and development policies, Chapter 6 evaluates multiple urban form characterization methods. Methods evaluated include local climate zones (LCZ), national land cover database (NCLD) classes and urban cluster analysis (UCA) to determine their utility in describing the distribution of the UHI based on three standard observation types 1) fixed urban temperature sensors, 2) mobile transects and, 3) remote sensing. Bivariate, regression and ANOVA tests are used to conduct the analyses. Findings indicate that the NLCD classes are best correlated to the UHI intensity and distribution in the study area. Further, while the UCA method is not useful directly, the variables included in the method are predictive based on regression analysis so the potential for better model design exists. Land cover variables including albedo, impervious surface fraction and pervious surface fraction are found to dominate the distribution of the UHI in the study area regardless of observation method.

Chapter 7 provides a summary of findings, and offers a brief analysis of their implications for both the scientific discourse generally, and the study area specifically. In general, the work undertaken does not achieve the full ambition of sustainability science, additional work is required to translate findings to practice and more fully evaluate adoption. The implications for planning and development in the local region are addressed in the context of a major light-rail infrastructure project including several systems level considerations like human health and development. Finally, several avenues for future work are outlined. Within the theoretical development of sustainability science, these pathways include more robust evaluations of the theoretical and actual practice. Within the UHI context, these include development of an integrated urban form characterization model, application of study methodology in other geographic areas and at different scales, and use of novel experimental methods including distributed sensor networks and citizen science.

Pollen from 50 lake surface samples in Brandenburg, Germany, in 2009

Past changes in plant and landscape diversity can be evaluated through pollen analysis, however, pollen based diversity indexes are potentially biased by differential pollen production and deposition. Studies examining the relationship between pollen and landscape diversity are therefore needed. The aim of this study is to evaluate how different pollen based indexes capture aspects of landscape diversity. Pollen counts were obtained from surface samples of 50 small to medium sized lakes in Brandenburg (Northeast Germany) and compiled into two sets, with one containing all pollen counts from terrestrial plants and the second restricted to wind-pollinated taxa. Both sets were adjusted for the pollen production/dispersal bias using the REVEALS model. A high resolution biotope map was used to extract the density of total biotopes and different biotopes per area as parameters describing landscape diversity. In addition tree species diversity was obtained from forest inventory data. The Shannon index and the number of taxa in a sample of 10 pollen grains are highly correlated and provide a useful measure of pollen type diversity which corresponds best to landscape diversity within one km of the lake and the proportion of non-forested area within seven km. Adjustments of the pollen production/dispersal bias only slightly improve the relationships between pollen diversity and landscape diversity for the restricted dataset as well as for the forest inventory data and corresponding pollen types. Using rarefaction analysis, we propose the following convention: pollen type diversity is represented by the number of types in a small sample (low count e.g. 10), pollen type richness is the number of types in a large sample (high count e.g. 500) and pollen sample evenness is characterized by the ratio of the two. Synthesis. Pollen type diversity is a robust index that captures vegetation structure and landscape diversity. It is ideally suited for between site comparisons as it does not require high pollen counts. In concert with pollen type richness and evenness, it helps evaluating the effect of climate change and human land use on vegetation structure on long timescales.

Simplified design method for energy dissipating devices in retrofitting of seismically isolated bridges

Abstract: Highway bridges have great values in a country because in case of any natural disaster they may serve as lines to save people’s lives. Being vulnerable under significant seismic loads, different methods can be considered to design resistant highway bridges and rehabilitate the existing ones. In this study, base isolation has been considered as one efficient method in this regards which in some cases reduces significantly the seismic load effects on the structure. By reducing the ductility demand on the structure without a notable increase of strength, the structure is designed to remain elastic under seismic loads. The problem associated with the isolated bridges, especially with elastomeric bearings, can be their excessive displacements under service and seismic loads. This can defy the purpose of using elastomeric bearings for small to medium span typical bridges where expansion joints and clearances may result in significant increase of initial and maintenance cost. Thus, supplementing the structure with dampers with some stiffness can serve as a solution which in turn, however, may increase the structure base shear. The main objective of this thesis is to provide a simplified method for the evaluation of optimal parameters for dampers in isolated bridges. Firstly, performing a parametric study, some directions are given for the use of simple isolation devices such as elastomeric bearings to rehabilitate existing bridges with high importance. Parameters like geometry of the bridge, code provisions and the type of soil on which the structure is constructed have been introduced to a typical two span bridge. It is concluded that the stiffness of the substructure, soil type and special provisions in the code can determine the employment of base isolation for retrofitting of bridges. Secondly, based on the elastic response coefficient of isolated bridges, a simplified design method of dampers for seismically isolated regular highway bridges has been presented in this study. By setting objectives for reduction of displacement and base shear variation, the required stiffness and damping of a hysteretic damper can be determined. By modelling a typical two span bridge, numerical analyses have followed to verify the effectiveness of the method. The method has been used to identify equivalent linear parameters and subsequently, nonlinear parameters of hysteretic damper for various designated scenarios of displacement and base shear requirements. Comparison of the results of the nonlinear numerical model without damper and with damper has shown that the method is sufficiently accurate. Finally, an innovative and simple hysteretic steel damper was designed. Five specimens were fabricated from two steel grades and were tested accompanying a real scale elastomeric isolator in the structural laboratory of the Université de Sherbrooke. The test procedure was to characterize the specimens by cyclic displacement controlled tests and subsequently to test them by real-time dynamic substructuring (RTDS) method. The test results were then used to establish a numerical model of the system which went through nonlinear time history analyses under several earthquakes. The outcome of the experimental and numerical showed an acceptable conformity with the simplified method.

Conception d’un mécanisme déployable à grand ratio d’expansion et de son système d’actionnement par roues d’inertie pour applications spatiales

Cette thèse propose de développer des mécanismes déployables pour applications spatiales ainsi que des modes d’actionnement permettant leur déploiement et le contrôle de l’orientation en orbite de l’engin spatial les supportant. L’objectif étant de permettre le déploiement de surfaces larges pour des panneaux solaires, coupoles de télécommunication ou sections de station spatiale, une géométrie plane simple en triangle est retenue afin de pouvoir être assemblée en différents types de surfaces. Les configurations à membrures rigides proposées dans la littérature pour le déploiement de solides symétriques sont optimisées et adaptées à l’expansion d’une géométrie ouverte, telle une coupole. L’optimisation permet d’atteindre un ratio d’expansion plan pour une seule unité de plus de 5, mais présente des instabilités lors de l’actionnement d’un prototype. Le principe de transmission du mouvement d’un étage à l’autre du mécanisme est revu afin de diminuer la sensibilité des performances du mécanisme à la géométrie de ses membrures internes. Le nouveau modèle, basé sur des courroies crantées, permet d’atteindre des ratios d’expansion plans supérieurs à 20 dans certaines configurations. L’effet des principaux facteurs géométriques de conception est étudié afin d’obtenir une relation simple d’optimisation du mécanisme plan pour adapter ce dernier à différents contextes d’applications. La géométrie identique des faces triangulaires de chaque surface déployée permet aussi l’empilement de ces faces pour augmenter la compacité du mécanisme. Une articulation spécialisée est conçue afin de permettre le dépliage des faces puis leur déploiement successivement. Le déploiement de grandes surfaces ne se fait pas sans influencer lourdement l’orientation et potentiellement la trajectoire de l’engin spatial, aussi, différentes stratégies de contrôle de l’orientation novatrices sont proposées. Afin de tirer profit d’une grande surface, l’actionnement par masses ponctuelles en périphérie du mécanisme est présentée, ses équations dynamiques sont dérivées et simulées pour en observer les performances. Celles-ci démontrent le potentiel de cette stratégie de réorientation, sans obstruction de l’espace central du satellite de base, mais les performances restent en deçà de l’effet d’une roue d’inertie de masse équivalente. Une stratégie d’actionnement redondant par roue d’inertie est alors présentée pour différents niveaux de complexité de mécanismes dont toutes les articulations sont passives, c’est-à-dire non actionnées. Un mécanisme à quatre barres plan est simulé en boucle fermée avec un contrôleur simple pour valider le contrôle d’un mécanisme ciseau commun. Ces résultats sont étendus à la dérivation des équations dynamiques d’un mécanisme sphérique à quatre barres, qui démontre le potentiel de l’actionnement par roue d’inertie pour le contrôle de la configuration et de l’orientation spatiale d’un tel mécanisme. Un prototype à deux corps ayant chacun une roue d’inertie et une seule articulation passive les reliant est réalisé et contrôlé grâce à un suivi par caméra des modules. Le banc d’essai est détaillé, ainsi que les défis que l’élimination des forces externes ont représenté dans sa conception. Les résultats montrent que le système est contrôlable en orientation et en configuration. La thèse se termine par une étude de cas pour l’application des principaux systèmes développés dans cette recherche. La collecte de débris orbitaux de petite et moyenne taille est présentée comme un problème n’ayant pas encore eu de solution adéquate et posant un réel danger aux missions spatiales à venir. L’unité déployable triangulaire entraînée par courroies est dupliquée de manière à former une coupole de plusieurs centaines de mètres de diamètre et est proposée comme solution pour capturer et ralentir ces catégories de débris. Les paramètres d’une mission à cette fin sont détaillés, ainsi que le potentiel de réorientation que les roues d’inertie permettent en plus du contrôle de son déploiement. Près de 2000 débris pourraient être retirés en moins d’un an en orbite basse à 819 km d’altitude.

High Quality Acoustic Time History Measurements of Rotor Harmonic Noise in Confined Spaces

A methodology has been developed and presented to enable the use of small to medium scale acoustic hover facilities for the quantitative measurement of rotor impulsive noise. The methodology was applied to the University of Maryland Acoustic Chamber resulting in accurate measurements of High Speed Impulsive (HSI) noise for rotors running at tip Mach numbers between 0.65 and 0.85 – with accuracy increasing as the tip Mach number was increased. Several factors contributed to the success of this methodology including: • High Speed Impulsive (HSI) noise is characterized by very distinct pulses radiated from the rotor. The pulses radiate high frequency energy – but the energy is contained in short duration time pulses. • The first reflections from these pulses can be tracked (using ray theory) and, through adjustment of the microphone position and suitably applied acoustic treatment at the reflected surface, reduced to small levels. A computer code was developed that automates this process. The code also tracks first bounce reflection timing, making it possible to position the first bounce reflections outside of a measurement window. • Using a rotor with a small number of blades (preferably one) reduces the number of interfering first bounce reflections and generally improves the measured signal fidelity. The methodology will help the gathering of quantitative hovering rotor noise data in less than optimal acoustic facilities and thus enable basic rotorcraft research and rotor blade acoustic design.

Produção de pellets de madeira no Brasil : estratégia, custo e risco do investimento

Tese (doutorado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Florestal, Programa de Pós-Graduação em Ciências Florestais, 2015.

The importance of local production and small-scale enterprises for Latin American development

Includes bibliography

Regional Cooperation of Small & Medium Firms in Japanese Industrial Clusters

This study examines the effects of intra-regional cooperation among firms and institutions on the growth of firms, using the unique data set of questionnaire survey collected in the three major industrial clusters in Japan. In contrast to the existing studies on regional innovations or agglomeration economies, this study explicitly focuses on the detailed contents of cooperative activities with two specific viewpoints: 1) the contents of regional cooperation in each of the three production stages of R&D, commercialization, and marketing, and 2) the detailed types of alliance partners. Our results demonstrate three points: 1) positive correlations are observed between the intensity of regional cooperation and the firm growth rate and R&D expenditure, 2) horizontal cooperation such as alliances with universities and cross-industry exchange organizations has positive significant effects on the growth rate of firms, which is in contrast with the previous studies that stressed only the role of vertically integrated inter-firm linkages in Japan, and 3) contents and partners of regional cooperation are different among the three clusters based on different dominant industries.

Access to technological and financial resources for SME innovation

Editorial: The contributions to this special issue of the International Journal of Technology Management are all based on selected papers presented at the European Conference on Management of Technology held at Aston University, Birmingham, UK in June 1995. This conference was held on behalf of the International Association for Management of Technology (IAMOT) and was the first of the association’s major conferences to be held outside North America. The overall theme of the conference was ‘Technological Innovation and Global Challenges’. Altogether more than 130 papers were presented within four sub-themes and twenty seven topic sessions. This special issue draws on papers within five difference topic sessions: ‘Small firm linkages’; ‘The global company’; ‘New technology based firms’; ‘Financing innovation’; ‘Technology and development’. Together they cover a wide range of issues around the common question of accessing resources for innovation in small and medium sized enterprises. They present a global perspective on this important subject with authors from The Netherlands, Canada, USA, Ireland, France, Finland, Brazil and UK. A wide range of subjects are covered including the move away from public support for innovation, the role of alliances and networks, linkages to larger enterprises and the social implications associated with small enterprise innovation in developing countries.

Purchasing green transport and logistics services:implications for small business

Considering its strong environmental impact, logistics plays a critical role in green supply chain management. It provides strategic links in the supply chain and is an essential function in the delivery of green products to the consumer. There is a general consensus on the fact that more environmentally sustainable companies may be achieved only if transport and logistics activities also become greener. To achieve this objective, buyer companies need to incorporate green considerations in the purchasing of transport and logistics services. This appears particularly challenging for small and medium sized enterprises (SMEs) because of their traditional lack of managerial, organisational and financial resources that often result in failure to adopt an environmental perspective. In the extant literature, green purchasing has received increased attention over the past decade and the strategic importance of introducing green aspects into purchasing practices has been recognised. However, little has been written in relation to purchasing green transport and logistics services. The aim of this paper is to explore practices in the buying of green transport and logistics services and to derive implications for small buyer companies. The paper analyses how general environmental company ambitions and environmental purchasing practices are reflected when green transport and logistics services are purchased in three different European countries (Italy, Ireland and Sweden) using a multiple case study research approach. The results of the paper indicate that while the case companies show a relatively high concern for green issues at corporate level, a lower importance is attributed to green issues at the purchasing function level. When green concerns in the purchasing of transport and logistics services are analysed the level of importance decreases further. Thus, a conflicting attitude is evident between the overall corporate level and the purchasing of transport and logistics services specifically. This suggests that there is potential for improvement especially in the area of green collaboration in buyer and supplier relationships.

Putting policy initiatives into practice:adopting an “honest broker” approach to adapting small businesses against flooding

Purpose: Amidst the current economic climate, which places many constraints on expensive flood defence schemes, the policy makers tend to favour schemes that are sympathetic to the needs of small and medium-sized enterprises (SMEs) and which promote empowering local communities based on their individual local contexts. Research has shown that although several initiatives are in place to create behavioural change among SMEs in undertaking adaptation approaches against flooding, they often tend to delay their responses by means of a "wait and see" attitude. The paper aims to discuss these issues. Design/methodology/approach: This paper argues that unless there are conscious efforts in the policy-making community to undertake explicit measures to engage with SMEs in a collaborative way, the uptake of adaptation measures will not be achieved as intended. With the use of the "honest broker" approach the paper provides a conceptual way forward of how a sense of collaboration can be instigated in an engagement process between the policy makers and SMEs, so that the scientific knowledge is translated in an appropriately rational way, which best meets the expectations of the SMEs. Findings: The paper proposes a conceptual model for engaging SMEs that will potentially increase the uptake of flood adaptation measures by SMEs. This could be a useful model with which to kick start a collaborative engagement process that could escalate to wider participation in other areas to improve impact of policy initiatives. Originality/value: The paper lays the conceptual foundation for a new theoretical base in the area, which will encourage more empirical investigations that will potentially enhance the practicality of some of the existing policies. © Emerald Group Publishing Limited.

Determinants of Firm Growth with respect to Exporting and Innovation Activities: Evidence from Egyptian SMEs

Small and medium-sized enterprises (SMEs) are considered to be the driving engine for employment growth, source of innovation and technological progress. Moreover, the success of small exporters is critical for economic growth and is considered as an important development stage for many SMEs. However, their competitive advantage lies within the firm’s ability to innovate. This thesis contributes to the above literature by examining two main factors believed to promote firm growth namely ‘exporting’ and ‘innovation’ activities. Growing interests on the relationship between exporting, innovation and growth have recently been tackled. However, there remains a gap in literature on the relationship between exporting, innovation and firm growth for SMEs in emerging economies. Previous studies are conducted in developed counties such as UK, Ireland, USA, Germany, and Switzerland, which leaves the gap for those developing countries. Thus, this thesis addresses the gap by examining the importance of innovation and exporting activities in the growth of SMEs in Egypt. It is also the researcher’s intent to recognise the unique contribution of innovation on firm exporting activities covering all sectors. gypt, one of the countries that were tremendously affected by the so-called ‘Arab Spring revolution’, is suffering from slow economic growth, high unemployment and poverty rate. Thus, the government must ensure economic growth and job creation. Programmes to encourage and develop SMEs should be part of inclusive growth strategy. Meanwhile, exporting is regarded as a key factor to help the economy recover from recession and stimulate economic growth. On the other hand, innovation leads to better performance in terms of growth, exporting and productivity. Therefore, SMEs and their exporting and innovation activities should be an integral part of any recovery and growth strategy for the economy. Moreover, Egypt is suffering from the so-called ‘Missing Middle’, which is problematic as medium firms tend to provide better employment growth and productivity. Therefore, more light is to shed on the importance of exporting and innovation in the growth of firms. The research design was quantitative in nature, testing the proposed hypotheses. The study was conducted in 2013 based on questionnaires of 406 Egyptians SMEs. The results of the empirical study suggest that both exporting and innovation activities are important in firm growth. However, the results show that, after controlling for endogeneity, innovation does not affect exporting activities in SMEs.

Determinants of firm growth with repect to exporting and innovation activities:evidence from Egyptian SMEs

Small and medium-sized enterprises (SMEs) are considered to be the driving engine for employment growth, source of innovation and technological progress. Moreover, the success of small exporters is critical for economic growth and is considered as an important development stage for many SMEs. However, their competitive advantage lies within the firm’s ability to innovate. This thesis contributes to the above literature by examining two main factors believed to promote firm growth namely ‘exporting’ and ‘innovation’ activities. Growing interests on the relationship between exporting, innovation and growth have recently been tackled. However, there remains a gap in literature on the relationship between exporting, innovation and firm growth for SMEs in emerging economies. Previous studies are conducted in developed counties such as UK, Ireland, USA, Germany, and Switzerland, which leaves the gap for those developing countries. Thus, this thesis addresses the gap by examining the importance of innovation and exporting activities in the growth of SMEs in Egypt. It is also the researcher’s intent to recognise the unique contribution of innovation on firm exporting activities covering all sectors. Egypt, one of the countries that were tremendously affected by the so-called ‘Arab Spring revolution’, is suffering from slow economic growth, high unemployment and poverty rate. Thus, the government must ensure economic growth and job creation. Programmes to encourage and develop SMEs should be part of inclusive growth strategy. Meanwhile, exporting is regarded as a key factor to help the economy recover from recession and stimulate economic growth. On the other hand, innovation leads to better performance in terms of growth, exporting and productivity. Therefore, SMEs and their exporting and innovation activities should be an integral part of any recovery and growth strategy for the economy. Moreover, Egypt is suffering from the so-called ‘Missing Middle’, which is problematic as medium firms tend to provide better employment growth and productivity. Therefore, more light is to shed on the importance of exporting and innovation in the growth of firms. The research design was quantitative in nature, testing the proposed hypotheses. The study was conducted in 2013 based on questionnaires of 406 Egyptians SMEs. The results of the empirical study suggest that both exporting and innovation activities are important in firm growth. However, the results show that, after controlling for endogeneity, innovation does not affect exporting activities in SMEs.