Obtenção e avaliação das potencialidades biológicas de complexos metálicos de 'ZN' e 'CO' contendo proteínas hidrolisadas do soro do leite

Pós-graduação em Química - IQ

Variação sazonal no recrutamento de Phragmatopoma caudata (Polychaeta, Sabellariidae) na costa sudeste do Brasil: biometria e validação de metodologia para categorização de classes etárias

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desempenho agronômico de feijão e milho em cultivo solteiro e consorciado, em função da população de plantas de feijão

Pós-graduação em Agronomia - FEIS

Análise microbiológica e físico-química de material proteico comestível derivado do processamento da gordura oriunda do abate de bovinos

Background: The use of all by-products of bovine slaughter is of high economic importance for the industries of products of animal origin. Among these products, fat has an important role, once fat rendering may generate several different products, such as protein material that may be used in the manufacture of meat products. However, in spite of the importance that the use of all by-products has for the economic balance of the industry, there are no reports on their use in Brazil, or studies that supply data on microbiological and physical-chemical local standards for this protein. Thus, the objective of this study was to evaluate microbiological and physical-chemical characteristics of protein material obtained from fat rendering, as well as to provide support for companies to use fat rendering to generate protein material, adding value to industrialized meat products.Materials, Methods & Results: The experimental production of edible protein obtained of fat rendering was conducted in slaughterhouse with supervision of the Brazilian Ministry of Agriculture, Livestock and Food Supply. Protein material was obtained in a continuous, humid heat system at high temperatures. Fat scraps containing protein were ground and cooked at high temperature (85 degrees C), and placed in a three phase decanter centrifuge. After centrifugation, protein material was ground again and packed. Samples were collected from 15 batches of protein material, and the following microbiological analyses were carried out: counts of aerobic mesophilic and psychrotrophic microorganisms, coliforms at 35 degrees C, Escherichia coli, sulfite-reducing Clostridium, and Staphylococcus aureus, besides presence or absence of Salmonella and Listeria monocytogens. The following physical-chemical analyses were also carried out: protein, total lipid, moisture, ash, carbohydrate, and energy content. Mean counts of mesophiles, psychrotrophs, and coliforms at 35 degrees C were 4.17; 3.69 and 1.87 (log CFU/g), respectively. Levels of protein, total lipids, moisture, ashes and carbohydrates were 27.50; 7.83; 63.88%; 0.24%; and 0.55%, respectively, and energy content was 182.63 kcal/100g.Discussion: Results of microbiological analyses demonstrated that, although low, the final product showed to be contaminated. Contamination that occurred during the second grinding procedure may be an explanation for these bacterial counts. Also, the temperature used for fat fusion was not enough to eliminate thermoduric microorganisms. However, even with the presence of indicator microorganisms in the samples, none was contaminated by E. coli, sulfite-reducing Clostridium, S. aureus, Salmonella or L. monocytogenes. Physical-chemical analyses showed that the product had adequate nutritional quality. Based on these results, it was possible to conclude that protein material obtained in fat rendering showed characteristics that enable the use of this product as raw material for processed meat products. Besides, the present study was the first one to present scientific results in relation to edible by-products obtained in fat rendering, supplying important information for slaughterhouses and meat-processing plants. The study also produced relevant data on the innocuousness of the product, which may be used to guide decision-making of health inspectors.

Effect of honey feeding by thyrinteina arnobia males and females on their reproduction and longevity

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Produção sustentável de leite bovino em área de proteção ambiental: aplicação da análise energética no município de Torre de Pedra/SP

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Contribuição das redes de T.I. para formulação da estratégia e gestão das empresas

Pós-graduação em Engenharia de Produção - FEB

Undernutrition fetal programming: effects on kidney morphology, renal steroid and angiotensin receptors expression and urinary sodium excretion

Maternal undernutrition affects the foetal development, promoting renal alterations and adult hypertension. The present study investigates, in adult male rats, the effect of food restriction in utero on arterial blood pressure changes (AP), and its possible association with the number of nephrons, renal function and angiotensin II (AT1R/AT2R), glucocorticoid (GR) and mineralocorticoid (MCR) receptors expression. The daily food supply to pregnant rats was measured and one group (n=5) received normal quantity of food (NF) while the other group received 50% of that (FR50) (n=5). The AP was measured weekly. At 16 weeks of life, fractionator’s method was used to estimate glomeruli number in histological slices. The renal function was estimate by creatinine and lithium clearances. Blood and urine samples were collected to biochemical determination of creatinine, sodium, potassium and lithium. At 90th and 23rd days of life, kidneys were also processed to AT1R, AT2R, GR and MCR immunolocalization and for western blotting analysis. FR50 offspring shows a significant reduction in BW (FR50: 5.67 ± 0.16 vs. 6.84 ± 0.13g in NF, P<0.001) and increased AP from 6th to 12nd week (6thwk FR50: 149.1 ± 3.4 vs. 125.1 ± 3.2mmHg in NF, P<0.001and, 12ndwk FR50: 164.4 ± 4.9 vs. 144.0 ± 3.3 mmHg in NF, P=0.02). Expression of AT1R and AT2R were significantly decreased in FR50 (AT1, 59080 ± 2709 vs. 77000 ± 3591 in NF, P=0.05; AT2, 27500 ± 95.50 vs. 67870 ± 1509 in NF, P=0.001) while the expression of GR increased in FR50 (36090 ± 781.5 vs. 4446 ± 364.5 in NF, P=0.0007). The expression of MCR did not change significantly. We also verified a pronounced decrease in fractional urinary sodium excretion in FR50 offspring (0.03 ± 0.02 vs. 0.06 ± 0.04 in NF, p=0.03). This occurred despite unchanged creatinine clearance. The study led us to suggest that fetal undernutrition, with increased fetal exposure... (Complete abstract click electronic access below)

Uma análise das estratégias de manufatura adotadas por seis montadoras da indústria automobilística mundial

The Brazilian automotive industry has undergone profound changes during the 90’s decade, as a consequence of the market opening up through the liberation of automobile imports. The exposure of the Brazilian domestic market to competition with imported products of high quality and lower prices indicated the need for significant changes in those auto industries operating in this country, with the intention of making them competitive. To achieve these objectives management and production concepts were adopted, such as: the just-in-time philosophy; lean manufacturing; outsourcing; reengineering and increasing the rate of automation in both production and management systems. These changes helped to increase productivity and, in turn, reduced the level of employment in the sector, especially in activities where the required qualification levels were low. Despite this modernization, the Brazilian companies have committed themselves to meet the specific needs of the Brazilian market. The objective of this paper is to analyze and present manufacturing strategies from six manufacturers of automotive vehicles: Toyota in Japan, Fiat in Italy, Volkswagen in Brazil and Germany and General Motors in the U.S. and Brazil. The predominant method of research was from reviewing relevant literature, whereas the empirical data was analyzed qualitatively. The article seeks to identify the manufacturing strategies adopted by manufacturers located in the above countries, electing one automotive manufacturer to represent each country. The research demonstrated that the processes for production of automobiles in four plants located in, the U.S. (GM); Italy (Fiat); Japan (Toyota) and Germany (VW) are similar to those adopted in Brazilian industrial plants of the same companies (GM and VW), with differences of operations only in the business strategies adopted by each of them.

O engavetamento de modelos de ensino superior dentro da universidade pública

This paper explores the contradictions between models conflicting today in Brazilian universities. The conglomeration of isolated institutions, integrated and multifunctional university and university-enterprise, service provider. This last model attempts to integrate higher education institutions to supply chains dominated by capital. Public universities were designed to provide innovative services and train staff researchers for such activity. The training of skilled workforce would be fundamentally task of private universities. But in any case, the onus would be on this training students. This model has been driven from the 1990s, with "instruction manuals" of the World Bank, and in 2000, with the IMF recommendations and, in the case of Latin American universities, Fundación Universia, sponsored by the Santander Bank. The question remains: the university will be able to organize the productive forces which have around research goals and staff training for independent development.

Life history and DNA barcode of Oxyurella longicaudis (Birgei, 1910) (Cladocera, Anomopoda, Chydoridae)

Background: Cladocera is an important group of freshwater zooplankton, and the species plays an important role in energy transfer and in aquatic food webs. Oxyurella longicaudis is a Chydoridae species that has been recorded in North and South America. The aim of this study is to investigate the life cycle aspects of parthenogenetic females of O. longicaudis cultured in laboratory under controlled conditions: temperature (23 degrees C +/- 05 degrees C), photoperiod (12 h light/12 h dark), food supply, and reconstituted water.Results: Embryonic development duration (2.3 +/- 0.5 days), post-embryonic development (5.2 +/- 0.69 days), mean fecundity (two eggs female(-1) brood(-1)), total egg production (22.55 +/- 3.98 eggs), average longevity (58 days), and body growth of the species were recorded. We also report the first DNA barcode for O. longicaudis isolated in Brazil, which will allow for easy identification in future zooplankton community studies. The analysis shows a genetic divergence of around 7% between our Brazilian isolate and O. longicaudis isolates from Mexico.Conclusions: The time of embryonic and post-embryonic development of O. longicaudis was higher than that of the other species of the same family, which contributed to lower total egg production throughout its life cycle. The genetic divergence appears to be sufficient to classify the two isolates as different species.

As dimensões geográficas dos Arranjos Produtivos Locais

This article aims to further discuss the Local Productive Arrangements (APLs), considering some geographical visions thinking about spatial configuration and the economic and social processes that characterize them, configuring a wide range of territorialities and productive territories that mark the landscape current Brazilian. In this sense, APLs are present today in both the figure of those who study analytical concept for regional development, and as a public policy supporting networks and supply chains in their territorial bases, especially small businesses. Thus, this arrangements can be read, geographically, as territorial productive specializations that are configured in spatial circuits of production, integrated with other regions, localities and supply chains through the morphology of networks and districts and grounded in networks of urban networks of material and immaterial flows which are bringing urban centers of different sizes. Considering the multidimensionality of the subject, the clusters have certain weaknesses in terms of their assumptions and perspectives, especially the limitations of the tool if designed just for resources and policies applied at the local level. Suggest the approach of a "geography of APLs" is to seek treat it from a territorial and socio reading.

Prevalência, distribuição espacial e fatores de risco para cisticercose bovina no estado de São Paulo

This study aimed to determine the prevalence and geographical distribution as well as the factors and areas of risk associated with bovine cysticercosis in the State of Sao Paulo. 34.443 cattle, males and females with ages from 18 to 60 months were inspected. The animals were from 97 cities in the state of Sao Paulo and identified and slaughtered in the period October 2010 to August 2011, in a refrigerator located in Ipua - SP, under the supervision of SIF 1387. The state of Sao Paulo was divided into regional centers, and the data of the municipalities belonging to its core, were grouped according to the Department of Agriculture and Food Supply of Sao Paulo, totaling 13 cores studied. Based on these results, we can conclude that of the 97 cities analyzed, cattle were found positive for the disease in 86. The average prevalence of bovine cysticercosis in the state of Sao Paulo was 4.80 %, while the core inflation Franca and Barretos were the ones with the highest number of cases illness during the analysis period. Moreover, the largest number of cases in these core coincided with the lowest human development index covering education, with the largest acreage of coffee (core Franca) and also as the largest area of cane sugar grown (core Barretos) in these locations, which in turn may indicate that the presence of labor, temporary labor in rural areas, combined with socioeconomic/cultural factors might contribute to the spread and establishment of bovine cysticercosis in these areas.

Isotope analysis (δ 13c) of pulpy whole apple juice

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Há sinergia entre o sistema lean manufacturing e a gestão ambiental? mapeando o estado da arte

In recent decades, two research themes have been prominent in the academic and organizational setting: lean manufacturing and green management. Since 1996, when Florida (1996) wrote an article focusing on the synergy between these two areas, the debate if “Lean is Green?” enters in the academic field. It is in this context that this research presents the results of a systematic literature on the topic, focusing on the characteristics, positive and negative impacts, lean paradigms, green paradigms and design of supply chains. To perform this procedure it were followed the methodological footsteps of Lage Junior and Godinho Filho (2010). The research occurred in the database Scopus and it was conducted from June, 2012 to July, 2012.The key word used was “green lean” and as search filter it were included only articles and conference Papers. Their main result is a deep analysis of the accumulated knowledge on the subject, where it is revealed that the majority of studies point to the synergy between some components of the lean manufacturing system in relation to environmental management. The research gap found is related to articles that address the entropy of the union of lean and green systems.