A High-Resolution 2D/3D Seismic Study of a Thrust Fault Zone in Lake Geneva, Switzerland

P130 A HIGH-RESOLUTION 2D/3D SEISMIC STUDY OF A THRUST FAULT ZONE IN LAKE GENEVA SWITZERLAND M. SCHEIDHAUER M. BERES D. DUPUY and F. MARILLIER Institute of Geophysics University of Lausanne 1015 Lausanne, Switzerland Summary A high-resolution three-dimensional (3D) seismic reflection survey has been conducted in Lake Geneva near the city of Lausanne Switzerland where the faulted molasse basement (Tertiary sandstones) is overlain by complex Quaternary sedimentary structures. Using a single 48-channel streamer an area of 1200 m x 600 m was surveyed in 10 days. With a 5-m shot spacing and a receiver spacing of 2.5 m in the inline direction and 7.5 m in the crossline direction, a 12-fold data coverage was achieved. A maximum penetration depth of ~150 m was achieved with a 15 cu. in. water gun operated at 140 bars. The multi-channel data allow the determination of an accurate velocity field for 3D processing, and they show particularly clean images of the fault zone and the overlying sediments in horizontal and vertical sections. In order to compare different sources, inline 55 was repeated with a 30/30 and a 15/15 cu. in. double-chamber air gun (Mini GI) operated at 100 and 80 bars, respectively. A maximum penetration depth of ~450 m was achieved with this source.

Model-based Segmentation and Fusion of 3D Computed Tomography and 3D Ultrasound of the Eye for Radiotherapy Planning

Computed Tomography (CT) represents the standard imaging modality for tumor volume delineation for radiotherapy treatment planning of retinoblastoma despite some inherent limitations. CT scan is very useful in providing information on physical density for dose calculation and morphological volumetric information but presents a low sensitivity in assessing the tumor viability. On the other hand, 3D ultrasound (US) allows a highly accurate definition of the tumor volume thanks to its high spatial resolution but it is not currently integrated in the treatment planning but used only for diagnosis and follow-up. Our ultimate goal is an automatic segmentation of gross tumor volume (GTV) in the 3D US, the segmentation of the organs at risk (OAR) in the CT and the registration of both modalities. In this paper, we present some preliminary results in this direction. We present 3D active contour-based segmentation of the eye ball and the lens in CT images; the presented approach incorporates the prior knowledge of the anatomy by using a 3D geometrical eye model. The automated segmentation results are validated by comparing with manual segmentations. Then, we present two approaches for the fusion of 3D CT and US images: (i) landmark-based transformation, and (ii) object-based transformation that makes use of eye ball contour information on CT and US images.

Quantitative analysis of crystal/grain sizes and their distributions in 2D and 3D

We review methods to estimate the average crystal (grain) size and the crystal (grain) size distribution in solid rocks. Average grain sizes often provide the base for stress estimates or rheological calculations requiring the quantification of grain sizes in a rock's microstructure. The primary data for grain size data are either 1D (i.e. line intercept methods), 2D (area analysis) or 3D (e.g., computed tomography, serial sectioning). These data have been used for different data treatments over the years, whereas several studies assume a certain probability function (e.g., logarithm, square root) to calculate statistical parameters as the mean, median, mode or the skewness of a crystal size distribution. The finally calculated average grain sizes have to be compatible between the different grain size estimation approaches in order to be properly applied, for example, in paleo-piezometers or grain size sensitive flow laws. Such compatibility is tested for different data treatments using one- and two-dimensional measurements. We propose an empirical conversion matrix for different datasets. These conversion factors provide the option to make different datasets compatible with each other, although the primary calculations were obtained in different ways. In order to present an average grain size, we propose to use the area-weighted and volume-weighted mean in the case of unimodal grain size distributions, respectively, for 2D and 3D measurements. The shape of the crystal size distribution is important for studies of nucleation and growth of minerals. The shape of the crystal size distribution of garnet populations is compared between different 2D and 3D measurements, which are serial sectioning and computed tomography. The comparison of different direct measured 3D data; stereological data and direct presented 20 data show the problems of the quality of the smallest grain sizes and the overestimation of small grain sizes in stereological tools, depending on the type of CSD. (C) 2011 Published by Elsevier Ltd.

Realització d'una aplicació de gestió de xarxes per a la xarxa sensefils de Manresa GuifiBages

En els últims anys, la popularitat de les xarxes sensefils (WIFI) ha anat en augment a un ritme incansable. Des de petits aparells instal•lats a les cases amb aquesta tecnologia com a complement dels routers d’accés a internet instal•lats per diverses companyies, fins a empreses fent petits desplegaments per comunicar entre si les seves seus. Al marge d’aquests escenaris, s’ha produït un fenomen social d’acolliment d’aquesta tecnologia a nivell mundial, en forma del que coneixem com a xarxes ciutadanes / xarxes lliures / xarxes socials. Aquestes xarxes han estat possibles gràcies a diverses raons que han fet assequible a col•lectius de persones, tant els aparells com els coneixements necessaris per dur a terme aquestes actuacions. Dintre d’aquest marc, al Bages, concretament a Manresa, es va començar a desenvolupar una d’aquestes xarxes. Les decisions d’aquesta xarxa d’utilitzar exclusivament hardware i software de codi obert, i determinats aspectes tècnics de la xarxa, ha comportat que la xarxa fos incompatible amb algunes de les aplicacions de gestió de xarxes existents desenvolupades per comunicats com gufi.net a Osona. És per això que per garantir el creixement, la supervivència i l’èxit d’aquesta xarxa en el temps, és indispensable poder comptar amb una eina de gestió que s’adigui a les característiques de GuifiBages. L’objectiu principal d’aquest treball és dotar a la xarxa GuifiBages de les eines necessàries per poder gestionar tota la informació referent a l’estructura de la seva xarxa, tant per facilitar l’accés a nous usuaris sense molts coneixements tècnics, com per facilitar nous desplegaments / reparacions / modificacions de la xarxa d’una manera automàtica. Com a conclusió d’aquest treball, podem afirmar que les avantatges que proporciones tecnologies com Plone, faciliten enormement la creació d’aplicacions de gestió de continguts en entorn web. Alhora, l’ús de noves tècniques de programació com AJAX o recursos com els que ofereix Google, permeten desenvolupar aplicacions web que no tenen res a envejar al software tradicional. D’altra banda, voldríem destacar l’ús exclusiu de programari lliure tant en els paquets de software necessaris pel desenvolupament, com en el sistema operatiu i programes dels ordinadors on s’ha dut a terme, demostrant que es poden desenvolupar sistemes de qualitat sense dependre de programari privatiu.

Gestió d'un portal web d'intercanvi de coneixement

En aquest món on ens ha tocat viure i patir canvis tan durs amb la crisi econòmica que patim, que ens ha fet passar de lligar els gossos amb llonganisses a vigilar en les despeses del dia a dia per poder arribar just a final de mes, és el moment de reinventar-se. És per aquest motiu que presento aquesta idea, on el seu objectiu és desenvolupar una pàgina web que esdevingui un punt de trobada entre usuaris que volen transmetre o ampliar el seu coneixement i oferir-los la possibilitat que entre ells puguin compartir les seves habilitats i destreses. El web consistirà en un panell d’activitats on els usuaris un cop s’hagin registrat puguin crear les activitats que vulguin aprendre o bé ensenyar, tot demanant, si ho desitgen, quelcom a canvi. Aleshores la resta d’usuaris si els interessa l’activitat, poden acceptar la demanda o bé fer una proposta pròpia. A partir d’aquí els usuaris s’han de posar d’acord a l’hora de dur a terme l’activitat. El web disposarà d’una part pels usuaris amb permisos d’administrador perquè puguin gestionar el portal. Aquest projecte s’ha desenvolupat amb el framework de PHP Codeigniter, el qual utilitza la programació per capes MVC, la qual separa la programació en tres parts: el Model, la Vista i el Controlador. També s’han utilitzat els llenguatges HTML5 i CSS3, i jQuery, que és una llibreria de JavaScript. Com a sistema gestor de base de dades s’ha utilitzat el MySQL.

Efectos de la presencia social de las lenguas escolares en el desarrollo lingüístico del alumnado extranjero. Un estudio empírico en Cataluña = The Social Presence of School Languages and Their Effects on the Development of Immigrant Students’ Linguistic Proficiency. An Empirical Study in Catalonia

El estudio de las variables relacionadas con la adquisición de las lenguas escolares en contextos bilingües y multilingües ha resurgido a raíz de la incorporación de alumnado extranjero al sistema educativo español. En este sentido, y gracias a su peculiar situación sociolingüística, Cataluña se ha convertido en un observatorio perfecto para estudiar el proceso de adquisición de lenguas del alumnado extranjero. En este artículo presentamos una parte de los datos obtenidos en la evaluación del conocimiento de catalán y del castellano de 668 alumnos extranjeros de sexto de Primaria escolarizados en 57 centros de Cataluña. Con ello pretendemos estudiar los efectos de la presencia y del uso social de las lenguas escolares en el conocimiento lingüístico de este alumnado. La hipótesis principal es que el desarrollo de buenos niveles de conocimiento escrito de las lenguas escolares por parte de los alumnos extranjeros depende, en buena medida, de las oportunidades que haya en el entorno social para que ellos puedan utilizar estas lenguas en los intercambios comunicativos informales con sus compañeros o con otros adultos. Las conclusiones del trabajo señalan las relaciones existentes entre el desarrollo de habilidades lingüísticas conversacionales y el de habilidades lingüísticas cognitivo-académicas (Cummins, 1979b), en el sentido de que tanto el conocimiento escrito de catalán como el de castellano que tiene el alumnado extranjero están condicionados por el nivel de desarrollo conversacional previo en ambas lenguas. Además, apuntan a que la transferencia de habilidades lingüísticas cognitivo-académicas no se produce directamente entre el catalán y el castellano, sino que depende fundamentalmente de la presencia social que tengan estas lenguas y de sus usos informales. Así, en la medida en que un buen número de estudiantes extranjeros no desarrolla suficiente competencia lingüística conversacional ni en catalán ni en castellano, el proceso de adquisición de las lenguas escolares se alarga más allá de los seis años

Trinocular System for 3D motion and Dense Stucture Estimation

The relief of the seafloor is an important source of data for many scientists. In this paper we present an optical system to deal with underwater 3D reconstruction. This system is formed by three cameras that take images synchronously in a constant frame rate scheme. We use the images taken by these cameras to compute dense 3D reconstructions. We use Bundle Adjustment to estimate the motion ofthe trinocular rig. Given the path followed by the system, we get a dense map of the observed scene by registering the different dense local reconstructions in a unique and bigger one

Identification of geometrically consistent interest points for 3D scene reconstruction

We propose an algorithm that extracts image features that are consistent with the 3D structure of the scene. The features can be robustly tracked over multiple views and serve as vertices of planar patches that suitably represent scene surfaces, while reducing the redundancy in the description of 3D shapes. In other words, the extracted features will off er good tracking properties while providing the basis for 3D reconstruction with minimum model complexity

A citation analysis of Catalan literary studies (1974-2003): towards a bibliometrics of humanities studies in minority languages

A citation analysis was carried out on the most important research journals in the field of Catalan literature between 1974 and 2003. The indicators and qualitative parameters obtained show the value of performing citation analysis in cultural and linguistic areas that are poorly covered by the A&HCI. Catalan literature shows a similar pattern to that of humanities in general, but it could still be in a stage of consolidation because too little work has as yet been published.

A filtering method to correct time-lapse 3D ERT data and improve imaging of natural aquifer dynamics

We have developed a processing methodology that allows crosshole ERT (electrical resistivity tomography) monitoring data to be used to derive temporal fluctuations of groundwater electrical resistivity and thereby characterize the dynamics of groundwater in a gravel aquifer as it is infiltrated by river water. Temporal variations of the raw ERT apparent-resistivity data were mainly sensitive to the resistivity (salinity), temperature and height of the groundwater, with the relative contributions of these effects depending on the time and the electrode configuration. To resolve the changes in groundwater resistivity, we first expressed fluctuations of temperature-detrended apparent-resistivity data as linear superpositions of (i) time series of riverwater-resistivity variations convolved with suitable filter functions and (ii) linear and quadratic representations of river-water-height variations multiplied by appropriate sensitivity factors; river-water height was determined to be a reliable proxy for groundwater height. Individual filter functions and sensitivity factors were obtained for each electrode configuration via deconvolution using a one month calibration period and then the predicted contributions related to changes in water height were removed prior to inversion of the temperature-detrended apparent-resistivity data. Applications of the filter functions and sensitivity factors accurately predicted the apparent-resistivity variations (the correlation coefficient was 0.98). Furthermore, the filtered ERT monitoring data and resultant time-lapse resistivity models correlated closely with independently measured groundwater electrical resistivity monitoring data and only weakly with the groundwater-height fluctuations. The inversion results based on the filtered ERT data also showed significantly less inversion artefacts than the raw data inversions. We observed resistivity increases of up to 10% and the arrival time peaks in the time-lapse resistivity models matched those in the groundwater resistivity monitoring data.

Reproducibility of 3D free-breathing magnetic resonance coronary vessel wall imaging.

AIMS: Although the coronary artery vessel wall can be imaged non-invasively using magnetic resonance imaging (MRI), the in vivo reproducibility of wall thickness measures has not been previously investigated. Using a refined magnetization preparation scheme, we sought to assess the reproducibility of three-dimensional (3D) free-breathing black-blood coronary MRI in vivo. METHODS AND RESULTS: MRI vessel wall scans parallel to the right coronary artery (RCA) were obtained in 18 healthy individuals (age range 25-43, six women), with no known history of coronary artery disease, using a 3D dual-inversion navigator-gated black-blood spiral imaging sequence. Vessel wall scans were repeated 1 month later in eight subjects. The visible vessel wall segment and the wall thickness were quantitatively assessed using a semi-automatic tool and the intra-observer, inter-observer, and inter-scan reproducibilities were determined. The average imaged length of the RCA vessel wall was 44.5+/-7 mm. The average wall thickness was 1.6+/-0.2 mm. There was a highly significant intra-observer (r=0.97), inter-observer (r=0.94), and inter-scan (r=0.90) correlation for wall thickness (all P<0.001). There was also a significant agreement for intra-observer, inter-observer, and inter-scan measurements on Bland-Altman analysis. The intra-class correlation coefficients for intra-observer (r=0.97), inter-observer (r=0.92), and inter-scan (r=0.86) analyses were also excellent. CONCLUSION: The use of black-blood free-breathing 3D MRI in conjunction with semi-automated analysis software allows for reproducible measurements of right coronary arterial vessel-wall thickness. This technique may be well-suited for non-invasive longitudinal studies of coronary atherosclerosis.

Aortic vessel wall magnetic resonance imaging at 3.0 Tesla: a reproducibility study of respiratory navigator gated free-breathing 3D black blood magnetic resonance imaging.

The purpose of this study was to evaluate a free-breathing three-dimensional (3D) dual inversion-recovery (DIR) segmented k-space gradient-echo (turbo field echo [TFE]) imaging sequence at 3T for the quantification of aortic vessel wall dimensions. The effect of respiratory motion suppression on image quality was tested. Furthermore, the reproducibility of the aortic vessel wall measurements was investigated. Seven healthy subjects underwent 3D DIR TFE imaging of the aortic vessel wall with and without respiratory navigator. Subsequently, this sequence with respiratory navigator was performed twice in 10 healthy subjects to test its reproducibility. The signal-to-noise (SNR), contrast-to-noise ratio (CNR), vessel wall sharpness, and vessel wall volume (VWV) were assessed. Data were compared using the paired t-test, and the reproducibility of VWV measurements was evaluated using intraclass correlation coefficients (ICCs). SNR, CNR, and vessel wall sharpness were superior in scans performed with respiratory navigator compared to scans performed without. The ICCs concerning intraobserver, interobserver, and interscan reproducibility were excellent (0.99, 0.94, and 0.95, respectively). In conclusion, respiratory motion suppression substantially improves image quality of 3D DIR TFE imaging of the aortic vessel wall at 3T. Furthermore, this optimized technique with respiratory motion suppression enables assessment of aortic vessel wall dimensions with high reproducibility.

The use of 3D planning in facial surgery: Preliminary observations.

Three-dimensional (3D) planning is becoming a more commonly used tool in maxillofacial surgery. At first used only virtually, 3D planning now also enables the creation of useful intraoperative aids such as cutting guides, which decrease the operative difficulty. In our center, we have used 3D planning in various domains of facial surgery and have investigated the advantages of this technique. We have also addressed the difficulties associated with its use. 3D planning increases the accuracy of reconstructive surgery, decreases operating time, whilst maintaining excellent esthetic results. However, its use is restricted to osseous reconstruction at this stage and once planning has been undertaken, it cannot be reversed or altered intraoperatively. Despite the attractive nature of this new tool, its uses and practicalities must be further evaluated. In particular, cost-effectiveness, hospital stay, and patient perceived benefits must be assessed.