Endodontia

O tratamento endodôntico é um procedimento comum em medicina dentária, tradicionalmente é realizado em múltiplas sessões, com medicação intracanalar entre sessões, para reduzir ou eliminar os microrganismos e os seus produtos antes da obturação, mas o conceito de tratamento numa sessão não é novo e nos últimos anos tem sido mais incorporado na prática clínica. O uso de técnicas endodônticas e equipamentos contemporâneos têm revolucionado os procedimentos endodônticos de modo a que seja possível a realização do tratamento endodôntico em uma única sessão, não só por aumentarem a taxa de sucesso do tratamento endodôntico, mas também por reduzirem o tempo necessário para o tratamento. A realização do tratamento numa única sessão tem vindo a ganhar aceitação como sendo o melhor tratamento na maioria dos casos, sendo que alguns endodontistas acreditam que existem poucos casos que não possam ser tratados com sucesso em uma única sessão. Dada a tendência para uma sociedade cada vez com um ritmo mais acelerado, este tipo de tratamento tem-se tornado o tratamento de eleição e habitualmente o tipo de tratamento preferido pelos pacientes Este trabalho tem como objetivo fazer uma revisão sobre o debate da realização do tratamento endodôntico em uma ou múltiplas sessões, avaliando todas as vantagens e desvantagens da realização do tratamento endodôntico numa sessão, comparativamente ao tratamento endodôntico em múltiplas sessões, bem como as suas indicações e contraindicações, de modo a proporcionar ao médico dentista uma informação atualizada desta abordagem clínica.

Measurement of fusional vergence: protocol for a systematic review

Introduction - No validated protocol exists for the measurement of the prism fusion ranges. Many studies report on how fusional vergence ranges can be measured using different techniques (rotary prism, prism bar, loose prisms and synoptophore) and stimuli, leading to different ranges being reported in the literature. Repeatability of the different methods available and the equivalence between them it is also important. In addition, some studies available do not agree in what order fusional vergence should be measured to provide the essential information on which to base clinical judgements on compensation of deviations. When performing fusional vergence testing the most commonly accepted clinical technique is to first measure negative fusional vergence followed by a measurement of positive fusional vergence to avoid affecting the value of vergence recovery because of excessive stimulation of convergence. Von Noorden recommend using vertical fusion amplitudes in between horizontal amplitudes (base-out, base-up, base-in, and base down) to prevent vergence adaptation. Others place the base of the prism in the direction opposite to that used to measure the deviation to increase the vergence demand. Objectives - The purpose of this review is to assess and compare the accuracy of tests for measurement of fusional vergence. Secondary objectives are to investigate sources of heterogeneity of diagnostic accuracy including: age; variation in method of assessment; study design; study size; type of strabismus (convergent, divergent, vertical, cycle); severity of strabismus (constant/intermittent/latent).

Análise comparativa "in vitro" da extrusão apical de detritos originados por diferentes técnicas de instrumentação do sistema de canais radiculares

Introdução: A extrusão apical detritos (EAD) consequência indesejável da instrumentação canalar pode ser associada a dor/edema, podendo atrasar a cicatrização periapical. O nosso trabalho teve como objectivo avaliar e quantificar a EAD em canais instrumentados por sistemas de instrumentação rotatória contínua e reciprocante. Materiais e Métodos: 80 dentes monocanalares sem tratamento endodôntico prévio foram aleatoriamente divididos em 4 grupos (n=20): One Shape® Protaper® NEXT, Hyflex® EDM e WaveOne® Gold. Um tubo de Eppendorf (TdE) foi pesado antecipadamente numa balança analítica de precisão e com um dente inserido foi montado num dispositivo modificado, similar ao método descrito por Myers & Montgomery. Os canais foram instrumentados e irrigados com água destilada. Os dentes instrumentados foram removidos dos TdE e estes preenchidos com água destilada até perfazer 1,5ml, incubados a 70ºC durante cinco dias sendo pesados novamente, calculando a diferença entre o peso inicial e final determinando o peso dos detritos. Os dados foram analisados estatisticamente utilizando o IBM SPSS Statistics 22, considerando α=0,05. Efetuaram-se testes Kruskal-Wallis e post-hoc com ajustamento do ρ-value pelo método Dunn-Bonferroni. Resultados: Houve EAD em todas as técnicas de instrumentação. A análise estatística mostrou haver diferenças significativas na EAD entre as técnicas utilizadas (α=0,002). Entre as técnicas WaveOne® Gold e One Shape® (α=0,003), WaveOne® Gold e Protaper® NEXT (α=0,023) e WaveOne® Gold e Hyflex® EDM (α=0,028). Conclusões: A técnica One Shape® apresentou menor EAD e a técnica WaveOne® Gold com movimento reciprocante constitui maior fator de risco tendo apresentado maior EAD. Os resultados deste estudo indicam que os profissionais devem estar cientes para a EAD que pode ocorrer com cada instrumento, o que poderá servir de base para a selecção de um instrumento particular. Implicações clínicas: A escolha do sistema de instrumentação canalar influencia a extrusão de detritos. Fontes de financiamento: Agradecimentos as empresas; Micro-Mega, França, COLTÉNE e Dentsply Maillefer, Suíça.

DESIGN, FABRICATION, AND PERFORMANCE CHARACTERIZATION OF MULTIFUNCTIONAL STRUCTURES TO HARVEST SOLAR ENERGY FOR FLAPPING WING AERIAL VEHICLES

Flapping Wing Aerial Vehicles (FWAVs) have the capability to combine the benefits of both fixed wing vehicles and rotary vehicles. However, flight time is limited due to limited on-board energy storage capacity. For most Unmanned Aerial Vehicle (UAV) operators, frequent recharging of the batteries is not ideal due to lack of nearby electrical outlets. This imposes serious limitations on FWAV flights. The approach taken to extend the flight time of UAVs was to integrate photovoltaic solar cells onto different structures of the vehicle to harvest and use energy from the sun. Integration of the solar cells can greatly improve the energy capacity of an UAV; however, this integration does effect the performance of the UAV and especially FWAVs. The integration of solar cells affects the ability of the vehicle to produce the aerodynamic forces necessary to maintain flight. This PhD dissertation characterizes the effects of solar cell integration on the performance of a FWAV. Robo Raven, a recently developed FWAV, is used as the platform for this work. An additive manufacturing technique was developed to integrate photovoltaic solar cells into the wing and tail structures of the vehicle. An approach to characterizing the effects of solar cell integration to the wings, tail, and body of the UAV is also described. This approach includes measurement of aerodynamic forces generated by the vehicle and measurements of the wing shape during the flapping cycle using Digital Image Correlation. Various changes to wing, body, and tail design are investigated and changes in performance for each design are measured. The electrical performance from the solar cells is also characterized. A new multifunctional performance model was formulated that describes how integration of solar cells influences the flight performance. Aerodynamic models were developed to describe effects of solar cell integration force production and performance of the FWAV. Thus, performance changes can be predicted depending on changes in design. Sensing capabilities of the solar cells were also discovered and correlated to the deformation of the wing. This demonstrated that the solar cells were capable of: (1) Lightweight and flexible structure to generate aerodynamic forces, (2) Energy harvesting to extend operational time and autonomy, (3) Sensing of an aerodynamic force associated with wing deformation. Finally, different flexible photovoltaic materials with higher efficiencies are investigated, which enable the multifunctional wings to provide enough solar power to keep the FWAV aloft without batteries as long as there is enough sunlight to power the vehicle.

Avaliação da biodegradabilidade de petróleo utilizando microrganismos isolados do estuário do Rio Potengi (RN)

The oil activity in the Rio Grande do Norte State (RN) is a permanent threat to coastal ecosystems, particularly mangroves, with the possibility of oil spills. In this context, the objective of this study was to evaluate the potential resistance of the mangrove environment of a possible spill. Were selected and isolated microorganisms degrading oil by the technique of enrichment cultures and formation of a bacterial consortium. The kinetic study of the consortium was held in rotary incubator shaken at 150 rpm and 30° C. Samples were taken at intervals of 4 hours for analysis of cell concentration and surface tension. The biodegradation was monitored using two methods of respirometry: manometric (OxiTop-C ®) and conductivimetry, where the biodegradation of oil was estimated indirectly by oxygen consumption and CO2 production, respectively. Furthermore, it was used a full 2² factorial design with triplicate at central point to the runs that used the conductivimetric methodology.. The technique of enrichment cultures allowed to obtain thirteen bacterial strains. Kinetic study of the consortium, we can showed the absence of the lag phase, reaching a maximum cell concentration of 2.55 g / L at 16 h of cultivation and a reduction on surface tension. When we adopted the methodology of OxiTop-C was detected a band indicating biodegradability (1% oil v/v), however when we used the conductivimetry methodology did not observe any band that would indicate effective biodegradation. By monitoring a process of biodegradation is necessary to observe the methodology will be adopted to evaluate the biodegradation process, since for the same conditions adopted different methodologies can produce different results. The oil-degrading isolates from soils of the mangrove estuary Potengi / RN are largely to be used in bioremediation strategies of these places, in the case of a possible oil spill, or it can be used in the treatment of waste oil generated in saline environments, since they are optimized the conditions of the tests so that the efficiency of biodegradation reach the minimum level suggested by the standarts

The Amplifier - v. 11, no. 2

In this issue...Continental Oil Company, Big Butte, Bolivia, Rotary Scholarship, YMCA, Anaconda Company, Butte Wesley Foundation, American Yearbook Company

The Amplifier - v. 12, no. 5

In this issue...Canyon Creek Mine, Mineral Club, Geophysics Club, Rotary Foundation, Phil Judd, NASA, State Highway Department, Gasamat, Campus Parking

The Amplifier - v. 15, no. 11

In this issue...Rotary Club, Petroleum Scholarship, Ossello's, Century Club, Lunch-In, Coach Stephens, Butte Civic Center, Continental Oil Company, Volunteer Military

The Amplifier - v. 17, no. 7

In this issue...Marcus Daly, Life Insurance, Butte Walk for Mankind, library Building, peace Corps, VISTA, Egg Drop, College Days, Student Council, Mountaineer Club

Dizziness in 10 year old children:an epidemiological study

OBJECTIVE: Current data about the prevalence and characteristics of dizziness in the paediatric population is very limited and the generalisability of extant studies to the UK population has not been explored. Our study aims to provide a robust estimate of the prevalence of dizziness in 10 year old children in the UK, to describe the characteristics of this dizziness and to explore whether this dizziness is socially patterned. METHODS: Data from the Avon Longitudinal Study of Parents and Children (ALSPAC) was analysed (N=13,988). A total of 6965 of these children attended for a balance assessment session at age 10. Those who reported rotary vertigo were interviewed about their symptoms. Logistic regression was used to explore whether dizziness at age 10 is socially patterned. RESULTS: A total of 400 children reported rotary vertigo, giving a prevalence estimate of 5.7% [CI 5.2, 6.3%]. 13.1-20.6% of children reported experiencing their dizziness between 1 and 4 times a week (depending on the symptom). 51.5% of children had to stop what they were doing because of the dizziness making them feel unwell. A total of 60% of children reported headache as an accompanying symptom, tentatively suggesting a diagnosis of migraine, although there was no association between reports of headache and a maternal family history of migraine. 20.3% of children with dizziness also reported tinnitus and 17.3% reported that their hearing changed when they were dizzy. CONCLUSIONS: Dizziness in 10 year old children is not uncommon and in about half limits current activities. Rotary vertigo is commonly accompanied by dizziness of another description and also by headache. There is no evidence that dizziness at this age is socially patterned.

Exploring nest destruction and bird mortality in mown Mediterranean dry grasslands: an increasing threat to grassland bird conservation

In recent years, haying has extended to Iberian Mediterranean dry grasslands potentially impacting on grassland bird ecology. We evaluated the impact of haying on a grassland bird community of South Portugal. Our main goals were: (1) to investigate the exposure of different species to haying, (2) to investigate potential removal of nests and dead birds from hayed fields by haying machinery using the ratio (REC) between the expected number of records and the number of records collected and (3) to link clutch destruction and bird mortality with haying management practices. Hayed fields were surveyed for signs of breeding and birds censused prior to mowing. Linear models were computed, linking the REC with haying machinery and sward properties. GLMs and model averaging were used to obtain models linking clutch destruction, bird mortality and haying management variables. Only 4 % of records evidenced successful nesting attempts (N = 177). REC evaluation suggested high nest or dead bird removal by the machinery, particularly in fields with lower vegetation biomass prior to cutting. Sickle bar mowers and one-rotor rotary rakes returned higher REC but lower probability of found nests removed from the original nesting sites comparatively to discs mowers and wheel rakes. Higher probabilities of mortality events were found in fields mown earlier (but not in all years). On the other hand, lower mortality was found in fields raked with two-rotor rotary rakes. Delayed haying, silage production in temporary crops and the use haying machinery enabling simultaneously mowing and gathering hay in lines are discussed as management alternatives.