An in vitro comparison of subjective image quality of panoramic views acquired via 2D or 3D imaging

Objectives: The objective of this study is to compare subjective image quality and diagnostic validity of cone-beam CT (CBCT) panoramic reformatting with digital panoramic radiographs. Materials and methods: Four dry human skulls and two formalin-fixed human heads were scanned using nine different CBCTs, one multi-slice CT (MSCT) and one standard digital panoramic device. Panoramic views were generated from CBCTs in four slice thicknesses. Seven observers scored image quality and visibility of 14 anatomical structures. Four observers repeated the observation after 4 weeks. Results: Digital panoramic radiographs showed significantly better visualization of anatomical structures except for the condyle. Statistical analysis of image quality showed that the 3D imaging modalities (CBCTs and MSCT) were 7.3 times more likely to receive poor scores than the 2D modality. Yet, image quality from NewTom VGi® and 3D Accuitomo 170® was almost equivalent to that of digital panoramic radiographs with respective odds ratio estimates of 1.2 and 1.6 at 95% Wald confidence limits. A substantial overall agreement amongst observers was found. Intra-observer agreement was moderate to substantial. Conclusions: While 2D-panoramic images are significantly better for subjective diagnosis, 2/3 of the 3D-reformatted panoramic images are moderate or good for diagnostic purposes. Clinical relevance: Panoramic reformattings from particular CBCTs are comparable to digital panoramic images concerning the overall image quality and visualization of anatomical structures. This clinically implies that a 3D-derived panoramic view can be generated for diagnosis with a recommended 20-mm slice thickness, if CBCT data is a priori available for other purposes.

Avaliação do número de células caliciformes nas criptas da mucosa colônica com e sem trânsito intestinal

OBJETIVO: Medir a espessura das criptas e quantificar o número de células caliciformes comparando a mucosa cólica com e sem trânsito intestinal, relacionando-as ao tempo de exclusão. MÉTODOS: Sessenta ratos Wistar, foram distribuídos em três grupos com 20 animais segundo a operação final para a retirada dos cólons, realizadas em seis, 12 ou 18 semanas. Em cada grupo, 15 animais foram submetidos à derivação do trânsito por colostomia proximal no cólon esquerdo e fístula mucosa distal e cinco apenas à laparotomia (controle). Os cólons com e sem trânsito fecal foram removidos, processados, submetidos a cortes histológicos corados pela hematoxilina-eosina. A altura das criptas colônicas e o número de células caliciformes foram mensurados por morfometria computadorizada. Foram utilizados os testes t de Student e Kruskal-Wallis para comparação e análise de variância, estabelecendo-se nível de significância de 5% (p<0,05). RESULTADOS: A altura das criptas diminui nos segmentos sem trânsito fecal (p=0,0001), reduzindo entre seis e 12 semanas de exclusão (p=0,0003), estabilizando-se após este período. O número de células caliciformes nas criptas é menor nos segmentos sem trânsito após 12 e 18 semanas (p=0,0001), porém aumenta com o decorrer do tempo de exclusão (p=0,04) CONCLUSÃO: A exclusão do trânsito intestinal diminui a espessura das criptas colônicas e o número de células caliciformes nos segmentos sem trânsito. Existe aumento do número de células caliciformes com o decorrer do tempo de exclusão.

Artroplastia do joelho navegada x mecânica: comparação entre casos iniciais de navegação e convencionais pelo mesmo cirurgião

OBJETIVO: Foram avaliados e comparados os eixos mecânicos pós-operatórios de 36 artroplastias totais de joelho pelos sistemas de alinhamento navegado e mecânico feitos no mesmo período pelo mesmo cirurgião e equipe, iniciantes na técnica navegada e com experiência na técnica mecânica. MÉTODOS: Entre 2008 e 2010, 36 próteses totais de joelho foram executadas e comparadas, 25 navegadas e 11 mecânicas. Qualquer desvio de eixo medido no RX panorâmico pós-operatório foi considerado positivo. RESULTADOS: As próteses navegadas obtiveram média de desvio de eixo de 1,32 graus e desvio padrão de 1,57 graus e as mecânicas, respectivamente, 3,18 e 2,99 graus. Houve um melhor alinhamento com tendência à diferença estatística em favor da técnica navegada. CONCLUSÃO: Os casos com desvio de eixo maior que três graus foram significativamente maiores na técnica mecânica. A técnica por navegação foi incorporada por nossa equipe sem complicações adicionais e, mesmo sem experiência em cirurgia navegada, os primeiros casos obtiveram melhor alinhamento em relação à técnica mecânica e número significativamente menor de casos fora da zona de segurança de três graus em relação ao eixo mecânico.

Seeking tools for image fusion between computed tomography, structural and functional magnetic resonance methods for applications in neurosurgery

OBJECTIVE: To evaluate tools for the fusion of images generated by tomography and structural and functional magnetic resonance imaging. METHODS: Magnetic resonance and functional magnetic resonance imaging were performed while a volunteer who had previously undergone cranial tomography performed motor and somatosensory tasks in a 3-Tesla scanner. Image data were analyzed with different programs, and the results were compared. RESULTS: We constructed a flow chart of computational processes that allowed measurement of the spatial congruence between the methods. There was no single computational tool that contained the entire set of functions necessary to achieve the goal. CONCLUSION: The fusion of the images from the three methods proved to be feasible with the use of four free-access software programs (OsiriX, Register, MRIcro and FSL). Our results may serve as a basis for building software that will be useful as a virtual tool prior to neurosurgery.

Computerized brain tumor segmentation in magnetic resonance imaging

OBJECTIVE: To propose an automatic brain tumor segmentation system. METHODS: The system used texture characteristics as its main source of information for segmentation. RESULTS: The mean correct match was 94% of correspondence between the segmented areas and ground truth. CONCLUSION: Final results showed that the proposed system was able to find and delimit tumor areas without requiring any user interaction.

Chitosan-based biomaterials used in critical-size bone defects: radiographic study in rat's calvaria

OBJETIVO: Este estudo avaliou através de imagens radiográficas digitais, a ação de biomateriais de quitosana e de cloridrato de quitosana, com baixo e alto peso molecular, utilizados na correção de defeitos ósseos de tamanho crítico (DOTC)em calvária de ratos. MATERIAL E MÉTODO: DOTCs com 8 mm de diâmetro foram criados cirurgicamente na calvária de 50 ratos Holtzman. Em 10 animais o defeito foi preenchido foram preenchidos com coágulo sanguíneo (controle negativo). Os 40 animais restantes foram divididos de acordo com o biomaterial utilizado no preenchimento do defeito (quitosana de baixo peso e de alto peso molecular, e cloridrato de quitosana de baixo e de alto peso molecular), e foram avaliados em dois períodos experimentais (15 e 60 dias), totalizando 5 animais/biomaterial/período de avaliação. RESULTADO: A avaliação radiográfica foi feita utilizando duas radiografias digitais do crânio do animal: uma tomada logo após o defeito ósseo ser criado e a outra no momento do sacrifício. Nessas imagens, foi avaliada a densidade óssea radiográfica inicial e a final na área do defeito, que foram comparadas. As análises na densidade óssea radiográfica indicaram aumento da densidade óssea radiográfica dos DOTCs tratados para todos os biomateriais testados, em ambos os períodos. Resultados semelhantes foram encontrados no grupo controle. CONCLUSÃO: Conclui-se que os biomateriais de quitosana testados não foram capazes de aumentar a densidade radiográfica em DOTC realizados em calvária de ratos.

O uso de um software na (re)habilitação de crianças com deficiência auditiva

OBJETIVO: Verificar a aplicabilidade de um software na (re)habilitação de crianças com deficiência auditiva. MÉTODOS: A amostra foi composta por 17 crianças com deficiência auditiva, sendo dez usuárias de Implante Coclear (IC) e sete usuárias de Aparelho de Amplificação Sonora Individual (AASI). Foi utilizado o "Software Auxiliar na Reabilitação de Distúrbios Auditivos (SARDA)". Aplicou-se o protocolo de treinamento durante 30 minutos, duas vezes por semana, pelo tempo necessário para a finalização das estratégias que compõe software. Para mensurar a aplicabilidade do software no treinamento da habilidade de percepção da fala no silêncio e no ruído, foram realizadas avaliações com o Hearing in Noise Test (HINT) pré e pós o treinamento auditivo. Os dados foram analisados estatisticamente. RESULTADOS: O grupo de usuários de IC necessitou em média 12,2 dias para finalizar as estratégias e o grupo de usuários de AASI em média 10,14 dias. Os dois grupos apresentaram diferença entre as avaliações pré e pós no silêncio e no ruído. As crianças mais novas apresentaram maior dificuldade durante a execução das estratégias, porém não houve correlação entre a idade e o desempenho. Não houve influência do tipo do dispositivo eletrônico durante o treinamento. As crianças apresentaram maior dificuldade na estratégia que envolvia estímulos não verbais e na estratégia com estímulos verbais que treina a habilidade de atenção sustentada. A atenção e a motivação da criança durante a estimulação foram fundamentais para o bom rendimento do treinamento auditivo. CONCLUSÃO: O treinamento auditivo com o SARDA foi eficaz, pois propiciou melhora na habilidade de percepção da fala, no silêncio e no ruído, das crianças com deficiência auditiva.

Vantaggi e limiti dell'integrazione tra sistemi di traduzione assistita e sistemi di traduzione automatica

Computer-assisted translation (or computer-aided translation or CAT) is a form of language translation in which a human translator uses computer software in order to facilitate the translation process. Machine translation (MT) is the automated process by which a computerized system produces a translated text or speech from one natural language to another. Both of them are leading and promising technologies in the translation industry; it therefore seems important that translation students and professional translators become familiar with this relatively new types of technology. Whether used together, not only might these two different types of systems reduce translation time, but also lead to a further improvement in the field of translation technologies. The dissertation consists of four chapters. The first one surveys the chronological development of MT and CAT tools, the emergence of pre-editing, post-editing and controlled language and the very last frontiers in this sector. The second one provide a general overview on the four main CAT tools that are used nowadays and tested hereto. The third chapter is dedicated to the experimentations that have been conducted in order to analyze and evaluate the performance of the four integrated systems that are the core subject of this dissertation. Finally, the fourth chapter deals with the issue of terminological equivalence in interlinguistic translation. The purpose of this dissertation is not to provide an objective and definitive solution to the complex issues that arise at any time in the field of translation technologies, this aim being well away from being achieved, but to supply information about the limits and potentiality that are typical of those instruments which are now essential to any professional translator.

Internazionalizzazione e traduzione: Un'esperienza presso l'azienda TR Turoni S.R.L.

This dissertation was conducted within the project Language Toolkit, which has the aim of integrating the worlds of work and university. In particular, it consists of the translation into English of documents commissioned by the Italian company TR Turoni and its primary purpose is to demonstrate that, in the field of translation for companies, the existing translation support tools and software can optimise and facilitate the translation process. The work consists of five chapters. The first introduces the Language Toolkit project, the TR Turoni company and its relationship with the CERMAC export consortium. After outlining the current state of company internationalisation, the importance of professional translators in enhancing the competitiveness of companies that enter new international markets is highlighted. Chapter two provides an overview of the texts to be translated, focusing on the textual function and typology and on the addressees. After that, manual translation and the main software developed specifically for translators are described, with a focus on computer-assisted translation (CAT) and machine translation (MT). The third chapter presents the target texts and the corresponding translations. Chapter four is dedicated to the analysis of the translation process. The first two texts were translated manually, with the support of a purpose-built specialized corpus. The following two documents were translated with the software SDL Trados Studio 2011 and its applications. The last texts were submitted to the Google Translate service and to a process of pre and post-editing. Finally, in chapter five conclusions are drawn about the main limits and potentialities of the different translations techniques. In addition to this, the importance of an integrated use of all available instruments is underlined.

Traduzione tecnica e internazionalizzazione d'impresa: Il caso di Technologica S.r.l.

This dissertation is part of the Language Toolkit project which is a collaboration between the School of Foreign Languages and Literature, Interpreting and Translation of the University of Bologna, Forlì campus, and the Chamber of Commerce of Forlì-Cesena. This project aims to create an exchange between translation students and companies who want to pursue a process of internationalization. The purpose of this dissertation is demonstrating the benefits that translation systems can bring to businesses. In particular, it consists of the translation into English of documents supplied by the Italian company Technologica S.r.l. and the creation of linguistic resources that can be integrated into computer-assisted translation (CAT) software, in order to optimize the translation process. The latter is claimed to be a priority with respect to the actual translation products (the target texts), since the analysis conducted on the source texts highlighted that the company could streamline and optimize its English language communication thanks to the use of open source CAT tools such as OmegaT. The work consists of five chapters. The first introduces the Language Toolkit project, the company (Technologica S.r.l ) and its products. The second chapter provides some considerations about technical translation, its features and some misconceptions about it. The difference between technical translation and scientific translation is then clarified and an overview is offered of translation aids such as those used for computer-assisted translation, machine translation, termbases and translation memories. The third chapter contains the analysis of the texts commissioned by Technologica S.r.l. and their categorization. The fourth chapter describes the translation process, with particular attention to terminology extraction and the creation of a bilingual glossary based on a specialized corpus. The glossary was integrated into the OmegaT software in order to facilitate the translation process both for the present task and for future applications. The memory deriving from the translation represents a sort of hybrid resource between a translation memory and a glossary. This was found to be the most appropriate format, given the specific nature of the texts to be translated. Finally, in chapter five conclusions are offered about the importance of language training within a company environment, the potentialities of translation aids and the benefits that they would bring to a company wishing to internationalize itself.

Content and English Language Integrated Learning: The use of Moodle in Aircraft Maintenance Training Programs

The aim of this work is to develop a prototype of an e-learning environment that can foster Content and Language Integrated Learning (CLIL) for students enrolled in an aircraft maintenance training program, which allows them to obtain a license valid in all EU member states. Background research is conducted to retrace the evolution of the field of educational technology, analyzing different learning theories – behaviorism, cognitivism, and (socio-)constructivism – and reflecting on how technology and its use in educational contexts has changed over time. Particular attention is given to technologies that have been used and proved effective in Computer Assisted Language Learning (CALL). Based on the background research and on students’ learning objectives, i.e. learning highly specialized contents and aeronautical technical English, a bilingual approach is chosen, three main tools are identified – a hypertextbook, an exercise creation activity, and a discussion forum – and the learning management system Moodle is chosen as delivery medium. The hypertextbook is based on the technical textbook written in English students already use. In order to foster text comprehension, the hypertextbook is enriched by hyperlinks and tooltips. Hyperlinks redirect students to webpages containing additional information both in English and in Italian, while tooltips show Italian equivalents of English technical terms. The exercise creation activity and the discussion forum foster interaction and collaboration among students, according to socio-constructivist principles. In the exercise creation activity, students collaboratively create a workbook, which allow them to deeply analyze and master the contents of the hypertextbook and at the same time create a learning tool that can help them, as well as future students, to enhance learning. In the discussion forum students can discuss their individual issues, content-related, English-related or e-learning environment-related, helping one other and offering instructors suggestions on how to improve both the hypertextbook and the workbook based on their needs.

Portare la tecnologia in cabina: le nuove tecnologie a servizio dell'interprete e il caso della simultanea con testo

The digital revolution has affected all aspects of human life, and interpreting is no exception. This study will provide an overview of the technology tools available to the interpreter, but it will focus more on simultaneous interpretation, particularly on the “simultaneous interpretation with text” method. The decision to analyse this particular method arose after a two-day experience at the Court of Justice of the European Union (CJEU), during research for my previous Master’s dissertation. During those days, I noticed that interpreters were using "simultaneous interpretation with text" on a daily basis. Owing to the efforts and processes this method entails, this dissertation will aim at discovering whether technology can help interpreters, and if so, how. The first part of the study will describe the “simultaneous with text” approach, and how it is used at the CJEU; the data provided by a survey for professional interpreters will describe its use in other interpreting situations. The study will then describe Computer-Assisted Language Learning technologies (CALL) and technologies for interpreters. The second part of the study will focus on the interpreting booth, which represents the first application of the technology in the interpreting field, as well as on the technologies that can be used inside the booth: programs, tablets and apps. The dissertation will then analyse the programs which might best help the interpreter in "simultaneous with text" mode, before providing some proposals for further software upgrades. In order to give a practical description of the possible upgrades, the domain of “judicial cooperation in criminal matters” will be taken as an example. Finally, after a brief overview of other applications of technology in the interpreting field (i.e. videoconferencing, remote interpreting), the conclusions will summarize the results provided by the study and offer some final reflections on the teaching of interpreting.

Virtobot--a multi-functional robotic system for 3D surface scanning and automatic post mortem biopsy

The Virtopsy project, a multi-disciplinary project that involves forensic science, diagnostic imaging, computer science, automation technology, telematics and biomechanics, aims to develop new techniques to improve the outcome of forensic investigations. This paper presents a new approach in the field of minimally invasive virtual autopsy for a versatile robotic system that is able to perform three-dimensional (3D) surface scans as well as post mortem image-guided soft tissue biopsies.

Investigating interocclusal perception in tactile teeth sensibility using symmetric and asymmetric analysis

The purpose of this clinical trial was to determine the active tactile sensibility of natural teeth and to obtain a statistical analysis method fitting a psychometric function through the observed data points. On 68 complete dentulous test persons (34 males, 34 females, mean age 45.9 ± 16.1 years), one pair of healthy natural teeth each was tested: n = 24 anterior teeth and n = 44 posterior teeth. The computer-assisted, randomized measurement was done by having the subjects bite on thin copper foils of different thickness (5-200 µm) inserted between the teeth. The threshold of active tactile sensibility was defined by the 50% value of correct answers. Additionally, the gradient of the sensibility curve and the support area (90-10% value) as a description of the shape of the sensibility curve were calculated. For modeling the sensibility curve, symmetric and asymmetric functions were used. The mean sensibility threshold was 14.2 ± 12.1 µm. The older the subject, the higher the tactile threshold (r = 0.42, p = 0.0006). The support area was 41.8 ± 43.3 µm. The higher the 50% threshold, the smaller the gradient of the curve and the larger the support area. The curves showing the active tactile sensibility of natural teeth demonstrate a tendency towards asymmetry, so that the active tactile sensibility of natural teeth can mathematically best be described by using the asymmetric Weibull function.

Anatomically-Driven Soft-Tissue Simulation Strategy for Cranio-Maxillofacial Surgery Using Facial Muscle Template Model

We propose a computationally efficient and biomechanically relevant soft-tissue simulation method for cranio-maxillofacial (CMF) surgery. A template-based facial muscle reconstruction was introduced to minimize the efforts on preparing a patient-specific model. A transversely isotropic mass-tensor model (MTM) was adopted to realize the effect of directional property of facial muscles in reasonable computation time. Additionally, sliding contact around teeth and mucosa was considered for more realistic simulation. Retrospective validation study with postoperative scan of a real patient showed that there were considerable improvements in simulation accuracy by incorporating template-based facial muscle anatomy and sliding contact.