Partir e ficar : Dinâmicas nos processos de migraçao e imigraçao no norte de Minas Gerais- Brasil

This proposal assumes that the migration process is a socio-spatial process. Where desires, goals, fears and hopes of migrating become identities, social constructs that ultimately lead to ways of belonging. Place is a form of interaction, whether between man and the environment, or the man with a specific space. Place demand belonging. Belonging demand identity. Migration then became a strategy, a resistance, an eternal possibility or impossibility of staying or leaving. The displacements eventually cause changes in the relationships and interactions of individuals in their most different spaces. In this sense, they grasp the shifting process of an individual or social group, it is seen that migration and immigration is a process beyond "of being in different social spaces", is a mode of social reproduction defined in relations of time and space, emphasizing the duality of being in motion. Therefore, this proposal seeks to emphasize the dynamics of migration and immigration process in their contexts, as well as highlight the economic social constructions arising from these proceedings, in its social, cultural, political and, thus characterizing the various identities of individuals

Partir e ficar : Dinâmicas nos processos de migraçao e imigraçao no norte de Minas Gerais- Brasil

This proposal assumes that the migration process is a socio-spatial process. Where desires, goals, fears and hopes of migrating become identities, social constructs that ultimately lead to ways of belonging. Place is a form of interaction, whether between man and the environment, or the man with a specific space. Place demand belonging. Belonging demand identity. Migration then became a strategy, a resistance, an eternal possibility or impossibility of staying or leaving. The displacements eventually cause changes in the relationships and interactions of individuals in their most different spaces. In this sense, they grasp the shifting process of an individual or social group, it is seen that migration and immigration is a process beyond "of being in different social spaces", is a mode of social reproduction defined in relations of time and space, emphasizing the duality of being in motion. Therefore, this proposal seeks to emphasize the dynamics of migration and immigration process in their contexts, as well as highlight the economic social constructions arising from these proceedings, in its social, cultural, political and, thus characterizing the various identities of individuals

Partir e ficar : Dinâmicas nos processos de migraçao e imigraçao no norte de Minas Gerais- Brasil

This proposal assumes that the migration process is a socio-spatial process. Where desires, goals, fears and hopes of migrating become identities, social constructs that ultimately lead to ways of belonging. Place is a form of interaction, whether between man and the environment, or the man with a specific space. Place demand belonging. Belonging demand identity. Migration then became a strategy, a resistance, an eternal possibility or impossibility of staying or leaving. The displacements eventually cause changes in the relationships and interactions of individuals in their most different spaces. In this sense, they grasp the shifting process of an individual or social group, it is seen that migration and immigration is a process beyond "of being in different social spaces", is a mode of social reproduction defined in relations of time and space, emphasizing the duality of being in motion. Therefore, this proposal seeks to emphasize the dynamics of migration and immigration process in their contexts, as well as highlight the economic social constructions arising from these proceedings, in its social, cultural, political and, thus characterizing the various identities of individuals

VISIONS Vehicular communication Improvement : solution based on IMS Operational Nodes and Services

Digital services and communications in vehicular scenarios provide the essential assets to improve road transport in several ways like reducing accidents, improving traffic efficiency and optimizing the transport of goods and people. Vehicular communications typically rely on VANET (Vehicular Ad hoc Networks). In these networks vehicles communicate with each other without the need of infrastructure. VANET are mainly oriented to disseminate information to the vehicles in certain geographic area for time critical services like safety warnings but present very challenging requirements that have not been successfully fulfilled nowadays. Some of these challenges are; channel saturation due to simultaneous radio access of many vehicles, routing protocols in topologies that vary rapidly, minimum quality of service assurance and security mechanisms to efficiently detect and neutralize malicious attacks. Vehicular services can be classified in four important groups: Safety, Efficiency, Sustainability and Infotainment. The benefits of these services for the transport sector are clear but many technological and business challenges need to be faced before a real mass market deployment. Service delivery platforms are not prepared for fulfilling the needs of this complex environment with restrictive requirements due to the criticism of some services To overcome this situation, we propose a solution called VISIONS “Vehicular communication Improvement: Solution based on IMS Operational Nodes and Services”. VISIONS leverages on IMS subsystem and NGN enablers, and follows the CALM reference Architecture standardized by ISO. It also avoids the use of Road Side Units (RSUs), reducing complexity and high costs in terms of deployment and maintenance. We demonstrate the benefits in the following areas: 1. VANET networks efficiency. VISIONS provide a mechanism for the vehicles to access valuable information from IMS and its capabilities through a cellular channel. This efficiency improvement will occur in two relevant areas: a. Routing mechanisms. These protocols are responsible of carrying information from a vehicle to another (or a group of vehicles) using multihop mechanisms. We do not propose a new algorithm but the use of VANET topology information provided through our solution to enrich the performance of these protocols. b. Security. Many aspects of security (privacy, key, authentication, access control, revocation mechanisms, etc) are not resolved in vehicular communications. Our solution efficiently disseminates revocation information to neutralize malicious nodes in the VANET. 2. Service delivery platform. It is based on extended enablers, reference architectures, standard protocols and open APIs. By following this approach, we reduce costs and resources for service development, deployment and maintenance. To quantify these benefits in VANET networks, we provide an analytical model of the system and simulate our solution in realistic scenarios. The simulations results demonstrate how VISIONS improves the performance of relevant routing protocols and is more efficient neutralizing security attacks than the widely proposed solutions based on RSUs. Finally, we design an innovative Social Network service based in our platform, explaining how VISIONS facilitate the deployment and usage of complex capabilities. RESUMEN Los servicios digitales y comunicaciones en entornos vehiculares proporcionan herramientas esenciales para mejorar el transporte por carretera; reduciendo el número de accidentes, mejorando la eficiencia del tráfico y optimizando el transporte de mercancías y personas. Las comunicaciones vehiculares generalmente están basadas en redes VANET (Vehicular Ad hoc Networks). En dichas redes, los vehículos se comunican entre sí sin necesidad de infraestructura. Las redes VANET están principalmente orientadas a difundir información (por ejemplo advertencias de seguridad) a los vehículos en determinadas zonas geográficas, pero presentan unos requisitos muy exigentes que no se han resuelto con éxito hasta la fecha. Algunos de estos retos son; saturación del canal de acceso de radio debido al acceso simultáneo de múltiples vehículos, la eficiencia de protocolos de encaminamiento en topologías que varían rápidamente, la calidad de servicio (QoS) y los mecanismos de seguridad para detectar y neutralizar los ataques maliciosos de manera eficiente. Los servicios vehiculares pueden clasificarse en cuatro grupos: Seguridad, Eficiencia del tráfico, Sostenibilidad, e Infotainment (información y entretenimiento). Los beneficios de estos servicios para el sector son claros, pero es necesario resolver muchos desafíos tecnológicos y de negocio antes de una implementación real. Las actuales plataformas de despliegue de servicios no están preparadas para satisfacer las necesidades de este complejo entorno con requisitos muy restrictivos debido a la criticidad de algunas aplicaciones. Con el objetivo de mejorar esta situación, proponemos una solución llamada VISIONS “Vehicular communication Improvement: Solution based on IMS Operational Nodes and Services”. VISIONS se basa en el subsistema IMS, las capacidades NGN y es compatible con la arquitectura de referencia CALM estandarizado por ISO para sistemas de transporte. También evita el uso de elementos en las carreteras, conocidos como Road Side Units (RSU), reduciendo la complejidad y los altos costes de despliegue y mantenimiento. A lo largo de la tesis, demostramos los beneficios en las siguientes áreas: 1. Eficiencia en redes VANET. VISIONS proporciona un mecanismo para que los vehículos accedan a información valiosa proporcionada por IMS y sus capacidades a través de un canal de celular. Dicho mecanismo contribuye a la mejora de dos áreas importantes: a. Mecanismos de encaminamiento. Estos protocolos son responsables de llevar información de un vehículo a otro (o a un grupo de vehículos) utilizando múltiples saltos. No proponemos un nuevo algoritmo de encaminamiento, sino el uso de información topológica de la red VANET a través de nuestra solución para enriquecer el funcionamiento de los protocolos más relevantes. b. Seguridad. Muchos aspectos de la seguridad (privacidad, gestión de claves, autenticación, control de acceso, mecanismos de revocación, etc) no están resueltos en las comunicaciones vehiculares. Nuestra solución difunde de manera eficiente la información de revocación para neutralizar los nodos maliciosos en la red. 2. Plataforma de despliegue de servicios. Está basada en capacidades NGN, arquitecturas de referencia, protocolos estándar y APIs abiertos. Siguiendo este enfoque, reducimos costes y optimizamos procesos para el desarrollo, despliegue y mantenimiento de servicios vehiculares. Para cuantificar estos beneficios en las redes VANET, ofrecemos un modelo de analítico del sistema y simulamos nuestra solución en escenarios realistas. Los resultados de las simulaciones muestran cómo VISIONS mejora el rendimiento de los protocolos de encaminamiento relevantes y neutraliza los ataques a la seguridad de forma más eficientes que las soluciones basadas en RSU. Por último, diseñamos un innovador servicio de red social basado en nuestra plataforma, explicando cómo VISIONS facilita el despliegue y el uso de las capacidades NGN.

Multi-dimensional classification using Bayesian networks for stationary and evolving streaming data

Hoy en día, con la evolución continua y rápida de las tecnologías de la información y los dispositivos de computación, se recogen y almacenan continuamente grandes volúmenes de datos en distintos dominios y a través de diversas aplicaciones del mundo real. La extracción de conocimiento útil de una cantidad tan enorme de datos no se puede realizar habitualmente de forma manual, y requiere el uso de técnicas adecuadas de aprendizaje automático y de minería de datos. La clasificación es una de las técnicas más importantes que ha sido aplicada con éxito a varias áreas. En general, la clasificación se compone de dos pasos principales: en primer lugar, aprender un modelo de clasificación o clasificador a partir de un conjunto de datos de entrenamiento, y en segundo lugar, clasificar las nuevas instancias de datos utilizando el clasificador aprendido. La clasificación es supervisada cuando todas las etiquetas están presentes en los datos de entrenamiento (es decir, datos completamente etiquetados), semi-supervisada cuando sólo algunas etiquetas son conocidas (es decir, datos parcialmente etiquetados), y no supervisada cuando todas las etiquetas están ausentes en los datos de entrenamiento (es decir, datos no etiquetados). Además, aparte de esta taxonomía, el problema de clasificación se puede categorizar en unidimensional o multidimensional en función del número de variables clase, una o más, respectivamente; o también puede ser categorizado en estacionario o cambiante con el tiempo en función de las características de los datos y de la tasa de cambio subyacente. A lo largo de esta tesis, tratamos el problema de clasificación desde tres perspectivas diferentes, a saber, clasificación supervisada multidimensional estacionaria, clasificación semisupervisada unidimensional cambiante con el tiempo, y clasificación supervisada multidimensional cambiante con el tiempo. Para llevar a cabo esta tarea, hemos usado básicamente los clasificadores Bayesianos como modelos. La primera contribución, dirigiéndose al problema de clasificación supervisada multidimensional estacionaria, se compone de dos nuevos métodos de aprendizaje de clasificadores Bayesianos multidimensionales a partir de datos estacionarios. Los métodos se proponen desde dos puntos de vista diferentes. El primer método, denominado CB-MBC, se basa en una estrategia de envoltura de selección de variables que es voraz y hacia delante, mientras que el segundo, denominado MB-MBC, es una estrategia de filtrado de variables con una aproximación basada en restricciones y en el manto de Markov. Ambos métodos han sido aplicados a dos problemas reales importantes, a saber, la predicción de los inhibidores de la transcriptasa inversa y de la proteasa para el problema de infección por el virus de la inmunodeficiencia humana tipo 1 (HIV-1), y la predicción del European Quality of Life-5 Dimensions (EQ-5D) a partir de los cuestionarios de la enfermedad de Parkinson con 39 ítems (PDQ-39). El estudio experimental incluye comparaciones de CB-MBC y MB-MBC con los métodos del estado del arte de la clasificación multidimensional, así como con métodos comúnmente utilizados para resolver el problema de predicción de la enfermedad de Parkinson, a saber, la regresión logística multinomial, mínimos cuadrados ordinarios, y mínimas desviaciones absolutas censuradas. En ambas aplicaciones, los resultados han sido prometedores con respecto a la precisión de la clasificación, así como en relación al análisis de las estructuras gráficas que identifican interacciones conocidas y novedosas entre las variables. La segunda contribución, referida al problema de clasificación semi-supervisada unidimensional cambiante con el tiempo, consiste en un método nuevo (CPL-DS) para clasificar flujos de datos parcialmente etiquetados. Los flujos de datos difieren de los conjuntos de datos estacionarios en su proceso de generación muy rápido y en su aspecto de cambio de concepto. Es decir, los conceptos aprendidos y/o la distribución subyacente están probablemente cambiando y evolucionando en el tiempo, lo que hace que el modelo de clasificación actual sea obsoleto y deba ser actualizado. CPL-DS utiliza la divergencia de Kullback-Leibler y el método de bootstrapping para cuantificar y detectar tres tipos posibles de cambio: en las predictoras, en la a posteriori de la clase o en ambas. Después, si se detecta cualquier cambio, un nuevo modelo de clasificación se aprende usando el algoritmo EM; si no, el modelo de clasificación actual se mantiene sin modificaciones. CPL-DS es general, ya que puede ser aplicado a varios modelos de clasificación. Usando dos modelos diferentes, el clasificador naive Bayes y la regresión logística, CPL-DS se ha probado con flujos de datos sintéticos y también se ha aplicado al problema real de la detección de código malware, en el cual los nuevos ficheros recibidos deben ser continuamente clasificados en malware o goodware. Los resultados experimentales muestran que nuestro método es efectivo para la detección de diferentes tipos de cambio a partir de los flujos de datos parcialmente etiquetados y también tiene una buena precisión de la clasificación. Finalmente, la tercera contribución, sobre el problema de clasificación supervisada multidimensional cambiante con el tiempo, consiste en dos métodos adaptativos, a saber, Locally Adpative-MB-MBC (LA-MB-MBC) y Globally Adpative-MB-MBC (GA-MB-MBC). Ambos métodos monitorizan el cambio de concepto a lo largo del tiempo utilizando la log-verosimilitud media como métrica y el test de Page-Hinkley. Luego, si se detecta un cambio de concepto, LA-MB-MBC adapta el actual clasificador Bayesiano multidimensional localmente alrededor de cada nodo cambiado, mientras que GA-MB-MBC aprende un nuevo clasificador Bayesiano multidimensional. El estudio experimental realizado usando flujos de datos sintéticos multidimensionales indica los méritos de los métodos adaptativos propuestos. ABSTRACT Nowadays, with the ongoing and rapid evolution of information technology and computing devices, large volumes of data are continuously collected and stored in different domains and through various real-world applications. Extracting useful knowledge from such a huge amount of data usually cannot be performed manually, and requires the use of adequate machine learning and data mining techniques. Classification is one of the most important techniques that has been successfully applied to several areas. Roughly speaking, classification consists of two main steps: first, learn a classification model or classifier from an available training data, and secondly, classify the new incoming unseen data instances using the learned classifier. Classification is supervised when the whole class values are present in the training data (i.e., fully labeled data), semi-supervised when only some class values are known (i.e., partially labeled data), and unsupervised when the whole class values are missing in the training data (i.e., unlabeled data). In addition, besides this taxonomy, the classification problem can be categorized into uni-dimensional or multi-dimensional depending on the number of class variables, one or more, respectively; or can be also categorized into stationary or streaming depending on the characteristics of the data and the rate of change underlying it. Through this thesis, we deal with the classification problem under three different settings, namely, supervised multi-dimensional stationary classification, semi-supervised unidimensional streaming classification, and supervised multi-dimensional streaming classification. To accomplish this task, we basically used Bayesian network classifiers as models. The first contribution, addressing the supervised multi-dimensional stationary classification problem, consists of two new methods for learning multi-dimensional Bayesian network classifiers from stationary data. They are proposed from two different points of view. The first method, named CB-MBC, is based on a wrapper greedy forward selection approach, while the second one, named MB-MBC, is a filter constraint-based approach based on Markov blankets. Both methods are applied to two important real-world problems, namely, the prediction of the human immunodeficiency virus type 1 (HIV-1) reverse transcriptase and protease inhibitors, and the prediction of the European Quality of Life-5 Dimensions (EQ-5D) from 39-item Parkinson’s Disease Questionnaire (PDQ-39). The experimental study includes comparisons of CB-MBC and MB-MBC against state-of-the-art multi-dimensional classification methods, as well as against commonly used methods for solving the Parkinson’s disease prediction problem, namely, multinomial logistic regression, ordinary least squares, and censored least absolute deviations. For both considered case studies, results are promising in terms of classification accuracy as well as regarding the analysis of the learned MBC graphical structures identifying known and novel interactions among variables. The second contribution, addressing the semi-supervised uni-dimensional streaming classification problem, consists of a novel method (CPL-DS) for classifying partially labeled data streams. Data streams differ from the stationary data sets by their highly rapid generation process and their concept-drifting aspect. That is, the learned concepts and/or the underlying distribution are likely changing and evolving over time, which makes the current classification model out-of-date requiring to be updated. CPL-DS uses the Kullback-Leibler divergence and bootstrapping method to quantify and detect three possible kinds of drift: feature, conditional or dual. Then, if any occurs, a new classification model is learned using the expectation-maximization algorithm; otherwise, the current classification model is kept unchanged. CPL-DS is general as it can be applied to several classification models. Using two different models, namely, naive Bayes classifier and logistic regression, CPL-DS is tested with synthetic data streams and applied to the real-world problem of malware detection, where the new received files should be continuously classified into malware or goodware. Experimental results show that our approach is effective for detecting different kinds of drift from partially labeled data streams, as well as having a good classification performance. Finally, the third contribution, addressing the supervised multi-dimensional streaming classification problem, consists of two adaptive methods, namely, Locally Adaptive-MB-MBC (LA-MB-MBC) and Globally Adaptive-MB-MBC (GA-MB-MBC). Both methods monitor the concept drift over time using the average log-likelihood score and the Page-Hinkley test. Then, if a drift is detected, LA-MB-MBC adapts the current multi-dimensional Bayesian network classifier locally around each changed node, whereas GA-MB-MBC learns a new multi-dimensional Bayesian network classifier from scratch. Experimental study carried out using synthetic multi-dimensional data streams shows the merits of both proposed adaptive methods.

Génesis, evolución y presente actual del sistema científico tecnológico de la ciudad de Madrid y su área metropolitana

La ciudad de Madrid y su área metropolitana han sido y son ahora también, uno de los más importantes polos de actividad científico-tecnológica de España. Madrid concentra en una región uniprovincial una gran parte de las instituciones públicas de investigación y desarrollo del país. La mayor parte se concentran en la ciudad de Madrid y el resto en el área metropolitana inmediata en un reducido espacio territorial. Madrid ha sido un lugar de primer nivel para localización y producción científico-tecnológica nacional: desde los inicios de la Edad de la Ilustración en la época de Carlos III, posteriormente en el siglo XIX, en el periodo del “Cajalismo” de principios del XX, con la JAE (Junta de Ampliación de Estudios) hasta 1939, con el CSIC “Consejo Superior de Investigaciones Científicas” desde 1939 hasta ahora y en la actualidad con los organismos ministeriales de Ciencia e Tecnología y con “MADRID NETWORK”, la agencia regional de desarrollo de parques científico-tecnológicos. Ha habido una secuencia temporal y espacial en la ubicación de las sedes de instituciones científico-técnicas en la ciudad a través del tiempo. En esta tesis doctoral se ha analizado la creación de este sistema y sus características básicas. Se ha evaluado si se ha formado un conjunto de áreas significativas en la ciudad que permitan hablar de un proyecto, o un grupo de proyectos, que han formado el sistema científico-técnico de Madrid. Al final se ha analizado cómo es en la actualidad este sistema, por medio de un estudio de la nueva red de parques científicos tecnológicos y si este último proyecto del sistema científico tecnológico de Madrid está concluido o si por el contrario está pendiente de terminar y desarrollar en estos momentos a principios del siglo XXI. Se ha estudiado los sectores y actividades a los que se dedican las empresas y organismos públicos presentes en los parques. ABSTRACT: The city of Madrid and its metropolitan area have been, and now are too, one of the most important scientific and technical activity poles of Spain. Madrid concentrates in a single-province region a great part of the public Research and Development institutions of the country. The majority are concentrated in the city of Madrid and the rest in the immediate metropolitan area in a limited territorial space. Madrid has been a first level place for location and national scientific and technical production: since the beginnings of the Age of Enlightenment in the Carlos III epoch, during the XIX century, in the “Cajalismo” period at first of the XX century, With JAE “Junta de Ampliación de Estudios” until 1939, with CSIC “Consejo Superior de Investigaciones Científicas” since 1939 up to now and nowadays with the Ministerial agencies of Science and Technology and with “MADRID NETWORK” the regional agency for the development of scientific and technical parks. There has been a temporal and spatial sequence in location of the scientific and technical headquarters and institutions in the city over time. In this doctoral thesis it has been analyzed the building this system and its basic characteristics. It has been evaluated if it has formed a set of significant areas in the city that lead us to talk about one project, or a group of projects, that have formed the scientific and technical system of Madrid. At the end is has been analyzed how is this system actually, by means of a study of the new network of scientific and technologic parks and if this last project of the Madrid´s scientific and technologic system is finished or, on the other hand, it is waiting to be finished, and be developed, in this moment, at the beginning of the XXI century. It has studied the sectors and activities to which are dedicated the companies and public organism that stay in the parks.

Speech Signals Feature Extraction Model for a Speaker’s Gender and Age Identification System

Durante el proceso de producción de voz, los factores anatómicos, fisiológicos o psicosociales del individuo modifican los órganos resonadores, imprimiendo en la voz características particulares. Los sistemas ASR tratan de encontrar los matices característicos de una voz y asociarlos a un individuo o grupo. La edad y sexo de un hablante son factores intrínsecos que están presentes en la voz. Este trabajo intenta diferenciar esas características, aislarlas y usarlas para detectar el género y la edad de un hablante. Para dicho fin, se ha realizado el estudio y análisis de las características basadas en el pulso glótico y el tracto vocal, evitando usar técnicas clásicas (como pitch y sus derivados) debido a las restricciones propias de dichas técnicas. Los resultados finales de nuestro estudio alcanzan casi un 100% en reconocimiento de género mientras en la tarea de reconocimiento de edad el reconocimiento se encuentra alrededor del 80%. Parece ser que la voz queda afectada por el género del hablante y las hormonas, aunque no se aprecie en la audición. ABSTRACT Particular elements of the voice are printed during the speech production process and are related to anatomical and physiological factors of the phonatory system or psychosocial factors acquired by the speaker. ASR systems attempt to find those peculiar nuances of a voice and associate them to an individual or a group. Age and gender are inherent factors to the speaker which may be represented in voice. This work attempts to differentiate those characteristics, isolate them and use them to detect speaker’s gender and age. Features based on glottal pulse and vocal tract are studied and analyzed in order to achieve good results in both tasks. Classical methodologies (such as pitch and derivates) are avoided since the requirements of those techniques may be too restrictive. The final scores achieve almost 100% in gender recognition whereas in age recognition those scores are around 80%. Factors related to the gender and hormones seem to affect the voice although they are not audible.

Comportamiento térmico y mecánico del yeso con adiciones de aerogel de sílice granulado

La presente tesis doctoral aborda el estudio de un nuevo material mineral, compuesto principalmente por una matriz de yeso (proveniente de un conglomerante industrial basado en sulfato de calcio multifase) y partículas de aerogel de sílice hidrófugo mesoporoso, compatibilizadas mediante un surfactante polimérico, debido a su alto carácter hidrófugo. La investigación se centra en conocer los factores que influyen en las propiedades mecánicas y conductividad térmica del material compuesto generado. Este estudio pretende contribuir al conocimiento sobre el desarrollo de nuevos morteros de elevado aislamiento térmico que puedan ser utilizados en la rehabilitación energética de edificios de viviendas existentes, debido a que estos representan gran parte del consumo energético del parque de viviendas de España, aunque también a nivel internacional. De los materiales utilizados para desarrollar los morteros estudiados, el yeso, además de ser un material muy abundante, especialmente en España, requiere una menor cantidad de energía para la fabricación de un conglomerante (debido a una menor temperatura de fabricación), en comparación con el cemento o la cal, por lo que presenta una menor huella de carbono que estos últimos. Por otro lado, el aerogel de sílice hidrófugo mesoporoso es, de acuerdo con la documentación disponible, el material que posee actualmente la mayor capacidad de aislamiento térmico en el mercado. El desarrollo de nuevos morteros minerales con una capacidad de aislamiento térmico mayor que los materiales aislantes utilizados tradicionalmente, tiene una aplicación relevante en los casos de rehabilitación energética de edificios históricos y patrimoniales, en los que se requiere la aplicación del aislamiento por el interior de la fachada, ya que este tipo de soluciones tienen el inconveniente de reducir el espacio habitable de las áreas involucradas, especialmente en zonas climáticas en las que el aislamiento térmico puede suponer un espesor considerable, por lo que es ideal utilizar materiales de altas prestaciones de aislamiento térmico capaces de aportar el mismo nivel de aislamiento (o incluso mayor), pero en un espesor considerablemente menor. La investigación se desarrolla en tres etapas: bibliográfica, experimental y de simulación. La primera etapa, parte del estudio de la bibliografía existente, relacionada con materiales aislantes, incluyendo soluciones basadas, tanto en morteros aislantes, como en paneles de aislamiento térmico. La segunda, de carácter experimental, se centra en estudiar la influencia de la microestrucrura y macroestructura, del nuevo material mineral, en las propiedades físicas elementales, mecánicas y conductividad térmica del compuesto. La tercera etapa, mediante una simulación del consumo energético, consiste en cuantificar teóricamente el potencial ahorro energético que puede aportar este material en un caso de rehabilitación energética en particular. La investigación experimental se centró principalmente en conocer los factores principales que influyen en las propiedades mecánicas y conductividad térmica de los materiales compuestos minerales desarrollados en esta tesis. Para ello, se llevó a cabo una caracterización de los materiales de estudio, así como el desarrollo de distintas muestras de ensayo, de tal forma que se pudo estudiar, tanto la hidratación del yeso en los compuestos, como su posterior microestructura y macroestructura, aspectos fundamentales para el entendimiento de las propiedades mecánicas y conductividad térmica del compuesto aislante. De este modo, se pudieron conocer y cuantificar, los factores que influyen en las propiedades estudiadas, aportando una base de conocimiento y entendimiento de este tipo de compuestos minerales con aerogel de sílice hidrófugo, no existiendo estudios publicados hasta el momento de finalización de esta tesis, con la aproximación al material propuesta en este estudio, ni con yeso (basado en sulfato de calcio multifase), ni con otro tipo de conglomerantes. Particularmente, se determinó la influencia que tiene la incorporación de partículas de aerogel de sílice hidrófugo, en grandes proporciones en volumen, en un compuesto mineral basado en distintas fases de sulfato de calcio. No obstante, para llevar a cabo las mezclas, fue necesario utilizar un surfactante para compatibilizar este tipo de partículas, con el conglomerante basado en agua. El uso de este tipo de aditivos tiene una influencia, no solo en el aerogel, sino en las propiedades del compuesto en general, dependiendo de su concentración, por lo que se establecieron dos porcentajes de adición: la primera, determinada a partir de la cantidad mínima necesaria para compatibilizar las mezclas (0,1% del agua de amasado), y la segunda, como límite superior, la concentración utilizada habitualmente a nivel industrial para estabilizar burbujas de aire en hormigones espumados (5%). El surfactante utilizado mostró la capacidad de modificar la superficie del aerogel, cambiando el comportamiento de las partículas frente al agua, permitiendo una invasión parcial de su estructura porosa, por parte del agua de amasado. Este comportamiento supone un aumento muy importante en la relación agua/yeso, afectando el hábito cristalino e influenciando negativamente las propiedades mecánicas de la matriz de yeso, presentando un efecto aún notable a mayor concentración de surfactante (5%). En cuanto a las propiedades finales alcanzadas, fue posible lograr un compuesto mineral ultraligero (200 kg/m3), con alrededor de un 60% de aerogel en volumen y de alta capacidad aislante (0,028 W/m•K), presentando una conductividad térmica notablemente menor que los morteros aislantes del mercado, e incluso también menor que la de los aislantes tradicionales basado en las lanas minerales o EPS; no obstante, con la limitante de presentar bajas propiedades mecánicas, condicionando su posible aplicación futura. Entre los factores principales relacionados con las propiedades mecánicas, se encontró que estas dependen exponencialmente del volumen de yeso en el compuesto; no obstante, factores de segundo orden, como el grado de hidratación, o una mejor distribución del conglomerante entre las partículas de aerogel, debido al aumento de la superficie específica del polvo mineral, pueden aumentar las propiedades mecánicas entre el doble y el triple, dependiendo del volumen de aerogel en cuestión. Además, se encontró que el aerogel, en conjunto con el surfactante, es capaz de introducir una gran cantidad de aire (0,70 m3 por cada m3 de aerogel), que unido al agua evaporada (no consumida por el conglomerante durante la hidratación), el volumen de aire total alcanza, generalmente, un 40%, independientemente de la cantidad de aerogel en la mezcla. De este modo, el aire introducido en la matriz desplaza las proporciones en volumen del aerogel y del yeso, disminuyendo, tanto las propiedades mecánicas, como la capacidad aislante de compuesto mineral. Por otro lado, la conductividad térmica mostró tener una dependencia directa de la contribución de las tres fases principales en el compuesto: yeso, aerogel y aire ocluido. De este modo, se pudo desarrollar un modelo matemático, adaptado de uno existente, capaz de calcular, con bastante precisión, la relación de los tres componentes mencionados, en la conductividad térmica de los compuestos, para el rango de volúmenes y materiales utilizados en esta tesis. Finalmente, la simulación del consumo energético realizada a una vivienda típica de España, de los años 1900 a 1959 (basada en muros de ladrillo macizo), para las zonas climáticas estudiadas (A, D y E), permitió observar el potencial ahorro energético que puede aportar este material, dependiendo de su espesor, como aislamiento interior de los muros de fachada. Particularmente, para la zona A, se determinó un espesor óptimo de 1 cm, mientras que para la zona D y E, 3,5 y 3,9 cm respectivamente. En este sentido, el nuevo material estudiado es capaz de disminuir, entre un 35% y un 80%, el espesor de la capa aislante, en comparación con paneles de lana de roca o los morteros minerales de mayor capacidad aislante del mercado español respectivamente. ABSTRACT The present doctoral thesis studies a new mineral-based composite material, composed by a gypsum matrix (based on an industrial multiphase gypsum binder) and mesoporous hydrophobic silica aerogel particles, compatibilized with a polymeric surfactant due to the high hydrophobic character of the insulating particles. This study pretends to contribute to the development of new composite insulating materials that could be used in energy renovation of existing dwellings, in order to reduce their high energy consumption, as they represent a great part of the total energy consumed in Spain, but also internationally. Between the materials used to develop de studied insulating mortars, gypsum, besides being an abundant material, especially in Spain, requires less energy for the manufacture of a mineral binder (due to lower manufacturing temperatures), compared to lime or cement, thus presenting lower carbon footprint. In other hand, the hydrophobic mesoporous silica aerogel, is, according to the existing references, the material with the highest know insulating capacity in the market. The development of new mineral mortars with higher thermal insulation capacity than traditional insulating materials, presents a relevant application in energy retrofitting of historic and cultural heritage buildings, in which implies that the insulating material should be installed as an internal layer, rather than as an external insulating system. This type of solution involves a reduced internal useful area, especially in climatic zones where the demand for thermal insulation is higher, and so the insulating layer thickness, being idealistic to use materials with very high insulating properties, in order to reach same insulating level (or higher), but in lower thickness than the provided by traditional insulating materials. This research is developed in three main stages: bibliographic, experimental and simulation. The first stage starts by studying the existing references regarding thermally insulating materials, including existing insulating mortars and insulating panels. The second stage, mainly experimental, is centered in the study of the the influence of the microstructure and macrostructure in the physical and mechanical properties, and also in the thermal conductivity of the new mineral-based material. The thirds stage, through energy simulation, consists in theoretically quantifying the energy savings potential that can provide this type of insulating material, in a particular energy retrofitting case study. The experimental research is mainly focused in the study of the factors that influence the mechanical properties and the thermal conductivity of the thermal insulating mineral composites developed in this thesis. For this, the characterization of the studied materials has been performed, as well as the development of several experimental samples, in order to study the hydration of the mineral binder within the composites, but also the final microstructure and macrostructure, fundamental aspects for the understanding of the composite’s mechanical and insulating properties. Thus, is was possible to determine and quantify the factors that influence the studied material properties, providing a knowledge base and understanding of mineral composites that comprises mesoporous hydrophobic silica aerogel particles, being the first study up to date regarding the specific approach of the present study, regarding not just multiphase calcium sulfate plaster, but also other mineral binders. Particularly, the influence of the incorporation of hydrophobic silica aerogel particles, in high volume ratios into a mineral compound, based on different phases of calcium sulfate has been determined. However, to perform mixing, it is necessary to use a surfactant in order to compatibilize these particles with the water-based mineral binder. The use of such additives has an influence, not only in the aerogel, but the overall properties of the compound, so two different surfactant concentration has been studied: the first, the minimum amount of surfactant (used in this thesis) in order to develop the slurries (0.1% concentration of the mixing water), and the second, as the upper limit, the concentration usually used industrially to stabilize air bubbles in foamed concrete (5%). One of the side effects of using such additive, was the modification of the aerogel particles, by changing their behavior in respect to water, generating a partial invasion of the aerogel’s porous structure, by the mixing water. This behavior produces a very important increase in water/binder ratios, affecting the crystal habit and negatively influencing the mechanical properties of the gypsum matrix. This effect further increased when a higher concentration of surfactant (5%) is used. Regarding final materials properties, it was possible to achieve an ultra-lightweight mineral composite (200 kg/m3), with around 60% by volume of aerogel, presenting a very high insulating capacity (0.028 W/m•K), a noticeable lower thermal conductivity compared to the insulating mortars and traditional thermal insulating panels on the market, such as mineral wool or EPS; however, the limiting factor for future’s material application in buildings, is related to the very low mechanical properties achieved. Among the main factors related to the mechanical properties, it has been found an exponential correlation to the volume of gypsum in the composite. However, second-order factors such as the degree of hydration, or a better distribution of the binder between the aerogel particles, due to the increased surface area of the mineral powder, can increase the mechanical properties between two to three times, depending aerogel volume involved. In addition, it was found that the aerogel, together with the surfactant, is able to entrain a large amount of air volume (around 0.70 m3 per m3 of aerogel), which together with the evaporated water (not consumed by the binder during hydration), can reach generally around 40% of entrained air within the gypsum matrix, regardless of the amount of aerogel in the mixture. Thus, the entrained air into the matrix displaces the volume proportions of the aerogel and gypsum, reducing both mechanical and insulating properties of the mineral composite. On the other hand, it has been observed a direct contribution of three main phases into the thermal conductivity of the composite: gypsum, aerogel and entrained air. Thus, it was possible to develop a mathematical model (adapted from an existing one), capable of calculating quite accurate the thermal conductivity of such mineral composites, from the ratio these three components and for the range of volumes and materials used in this thesis. Finally, the energy simulation performed to a typical Spanish dwelling, from the years 1900 to 1959 (mainly constructed with massive clay bricks), within three climatic zones of Spain (A, D and E), showed the energy savings potential that can provide this type of insulating material, depending on the thickness of the applied layer. Particularly, for the climatic A zone, it has been found an optimal layer thickness of 1 cm, while for zone D and E, 3.5 and 3.9 cm respectively. In this manner, the new studied materials is capable of decreasing the thickness of the insulating layer by 35% and 80%, compared with rock wool panels or mineral mortars with the highest insulating performance of the Spanish market respectively.

Conformational fluctuations in single DNA molecules

Measurement of fluorescent lifetimes of dye-tagged DNA molecules reveal the existence of different conformations. Conformational fluctuations observed by fluorescence correlation spectroscopy give rise to a relaxation behavior that is described by “stretched” exponentials and indicates the presence of a distribution of transition rates between two conformations. Whether this is an inhomogeneous distribution, where each molecule contributes with its own reaction rate to the overall distribution, or a homogeneous distribution, where the reaction rate of each molecule is time-dependent, is not yet known. We used a tetramethylrhodamine-linked 217-bp DNA oligonucleotide as a probe for conformational fluctuations. Fluorescence fluctuations from single DNA molecules attached to a streptavidin-coated surface directly show the transitions between two conformational states. The conformational fluctuations typical for single molecules are similar to those seen in single ion channels in cell membranes.

Use of health services by children and young people according to ethnicity and social class: secondary analysis of a national survey

Objective To assess whether equity is achieved in use of general practitioner, outpatient, and inpatient services by children and young people according to their ethnic group and socioeconomic background.

Location of the active site of allosteric chorismate mutase from Saccharomyces cerevisiae, and comments on the catalytic and regulatory mechanisms.

The active site of the allosteric chorismate mutase (chorismate pyruvatemutase, EC 5.4.99.5) from yeast Saccharomyces cerevisiae (YCM) was located by comparison with the mutase domain (ECM) of chorismate mutase/prephenate dehydratase [prephenate hydro-lyase (decarboxylating), EC 4.2.1.51] (the P protein) from Escherichia coli. Active site domains of these two enzymes show very similar four-helix bundles, each of 94 residues which superimpose with a rms deviation of 1.06 A. Of the seven active site residues, four are conserved: the two arginines, which bind to the inhibitor's two carboxylates; the lysine, which binds to the ether oxygen; and the glutamate, which binds to the inhibitor's hydroxyl group in ECM and presumably in YCM. The other three residues in YCM (ECM) are Thr-242 (Ser-84), Asn-194 (Asp-48), and Glu-246 (Gln-88). This Glu-246, modeled close to the ether oxygen of chorismate in YCM, may function as a polarizing or ionizable group, which provides another facet to the catalytic mechanism.

The 3'-terminal exon of the family of steroid and phenol sulfotransferase genes is spliced at the N-terminal glycine of the universally conserved GXXGXXK motif that forms the sulfonate donor binding site.

The guinea pig estrogen sulfotransferase gene has been cloned and compared to three other cloned steroid and phenol sulfotransferase genes (human estrogen sulfotransferase, human phenol sulfotransferase, and guinea pig 3 alpha-hydroxysteroid sulfotransferase). The four sulfotransferase genes demonstrate a common outstanding feature: the splice sites for their 3'-terminal exons are identically located. That is, the 3'-terminal exon splice sites involve a glycine that constitutes the N-terminal glycine of an invariably conserved GXXGXXK motif present in all steroid and phenol sulfotransferases for which primary structures are known. This consistency strongly suggests that all steroid and phenol sulfotransferase genes will be similarly spliced. The GXXGXXK motif forms the active binding site for the universal sulfonate donor 3'-phosphoadenosine 5'-phosphosulfate. Amino acid sequence alignment of 19 cloned steroid and phenol sulfotransferases starting with the GXXGXXK motif indicates that the 3'-terminal exon for each steroid and phenol sulfotransferase gene encodes a similarly sized C-terminal fragment of the protein. Interestingly, on further analysis of the alignment, three distinct amino acid sequence patterns emerge. The presence of the conserved functional GXXGXXK motif suggests that the protein domains encoded by steroid and phenol sulfotransferase 3'-terminal exons have evolved from a common ancestor. Furthermore, it is hypothesized that during the course of evolution, the 3'-terminal exon further diverged into at least three sulfotransferase subdivisions: a phenol or aryl group, an estrogen or phenolic steroid group, and a neutral steroid group.

Efficacia della formazione alla salute e sicurezza sul lavoro: fattori di successo e criticità

Background: sulla base delle evidenze emerse dalle rassegne sistematiche in materia (Johnstone, 1994; Cohen et al.,1998; Robson et al., 2012; Burke et al., 2006; Ricci et al., 2015) si è ipotizzato che la formazione alla salute e sicurezza sul lavoro sia maggiormente efficace quando non è presentata come obbligatoria e venga articolata su più livelli di apprendimento, attraverso metodologie adeguate per ogni livello, con docenti che abbiano caratteristiche corrispondenti allo specifico obiettivo di apprendimento e la cui durata sia parametrata all’obiettivo stesso. Obiettivo di questa ricerca è valutare se esista e quanto sia intensa la relazione causale tra la formazione alla sicurezza sul lavoro e i suoi effetti sul miglioramento delle conoscenze, degli atteggiamenti, dei comportamenti, degli esiti per la salute, del clima di sicurezza aziendale, del controllo comportamentale percepito dai lavoratori, delle condizioni operative e procedure interne, oltre l’eventuale effetto di moderazione determinato da caratteristiche socio-demografiche dei partecipanti e dal gradimento della formazione. Metodo: la variabile indipendente è costituita dell’intervento formativo erogato, articolato in tre condizioni: formazione obbligatoria, formazione non obbligatoria, gruppo di controllo: sono stati posti a confronto due interventi di pari durata (16 settimane, per 10h complessive), realizzati con identiche modalità (step1 audio-visivo; step2 affiancamento su lavoro da parte del preposto; step3 discussione di auto-casi), ma differenziati rispetto all’essere presentati uno come formazione obbligatoria, l’altro come non obbligatoria. I due gruppi sono anche stati confrontati con un gruppo di controllo per il quale la formazione è prevista successivamente. I partecipanti sono stati assegnati in modo casuale al gruppo con obbligo formativo, senza obbligo formativo, di controllo. Sono stati presi come indicatori (variabili dipendenti) per valutare l’effetto della formazione: I livello – conoscenze: riconoscimento o produzione di un maggior numero di risposte corrette. II livello – atteggiamenti e credenze: maggiore propensione a mettere in atto comportamenti auto ed etero protettivi. III livello – comportamenti: comportamenti osservati più adeguati per la tutela della salute propria e altrui. IV livello – salute: maggior grado di benessere bio-psico-sociale auto-riferito. Le misure di esito consistono nella variazione tra la rilevazione iniziale e ogni rilevazione successiva, sulla base delle diverse misure registrate per ognuno dei quattro livelli dell’intervento formativo. Lo stesso confronto del tempo è stato realizzato per le misure del clima di sicurezza aziendale, del controllo comportamentale percepito dai lavoratori, delle condizioni operative e procedure interne, oltre l’eventuale effetto di moderazione determinato da caratteristiche socio-demografiche dei partecipanti e dal gradimento della formazione, quest’ultimo misurato solo immediatamente al termine dell’intervento. Risultati: le condizioni di intervento non differiscono in termini di efficacia, la formazione determina infatti gli stessi risultati per i partecipanti del gruppo obbligo formativo e di quello non obbligo, con una significativa differenza post-intervento rispetto al gruppo di controllo. La formazione ha un effetto forte nel miglioramento delle conoscenze che solo parzialmente decade nel tempo, ma comunque mantenendo un livello maggiore rispetto ai valori iniziali. In relazione al miglioramento di atteggiamenti e comportamenti sicuri nel lavoro al Videoterminale, l’effetto della formazione è modesto: per gli atteggiamenti si registra solo un miglioramento verso l’applicazione delle procedure come utili realmente e non come mero adempimento, ma tale effetto decade entro quattro mesi riportando i partecipanti su valori iniziali; i comportamenti invece migliorano nel tempo, ma con deboli differenze tra partecipanti alla formazione e gruppo di controllo, tuttavia tale miglioramento non decade in seguito. Non si registrano invece effetti della formazione nella direzione attesa in termini di esiti per la salute, per il miglioramento del clima di sicurezza e come maggior controllo comportamentale percepito, non risultano nemmeno dati evidenti di moderazione degli effetti dovuti a caratteristiche socio-demografiche dei partecipanti. Inoltre emerge che il gradimento per la formazione è correlato con migliori atteggiamenti (strumento audio-visivo), il miglioramento del clima di sicurezza e un maggior controllo comportamentale percepito (studio di auto-casi), ovvero gli step che hanno visto l’intervento di formatori qualificati. Infine, la formazione ha determinato migliori condizioni operative e l’adeguamento delle procedure interne. Conclusioni: la presente ricerca ci consente di affermare che la formazione erogata è stata efficace, oltre che molto gradita dai partecipanti, in particolare quando il formatore è qualificato per questa attività (step1 e 3). L’apprendimento prodotto è tanto più stabile nel tempo quanto più i contenuti sono in stretta relazione con l’esperienza lavorativa quotidiana dei partecipanti, mentre negli altri casi il decremento degli effetti è alquanto rapido, di conseguenza ribadiamo la necessità di erogare la formazione con continuità nel tempo. E’ risultato comunque modesto l’effetto della formazione per migliorare gli atteggiamenti e i comportamenti nel lavoro al VDT, ma, al di là di alcuni limiti metodologici, sono obiettivi ambiziosi che richiedono più tempo di quanto abbiamo potuto disporre in questa occasione e il cui conseguimento risente molto delle prassi reali adottate nel contesto lavorativo dopo il termine della formazione. Le evidenze finora prodotte non hanno poi chiarito in modo definitivo se attraverso la formazione si possano determinare effetti significativi nel miglioramento di esiti per la salute, anche eventualmente attraverso interventi di supporto individuale. Inoltre l’assenza di differenze significative negli effetti tra i partecipanti assegnati alla condizione di obbligo e quelli di non obbligo, eccezion fatta in direzione opposta alle attese per la misura del danno da lavoro, suggeriscono che nell’erogare la formazione, occorre sottolineare in misura molto rilevante l’importanza dell’intervento che viene realizzato, anche qualora esistesse una prescrizione normativa cogente. Infine, la ricerca ci ha fornito anche indicazioni metodologiche e misure valide che invitano ad estendere questa formazione, e la sua valutazione di efficacia, a diversi comparti economici e svariate mansioni. Nel fare questo è possibile fare riferimento, e testare nuovamente, un modello che indica la corretta percezione del rischio (conoscenza) come fattore necessario, ma non sufficiente per ottenere, con la mediazione di atteggiamenti favorevoli allo specifico comportamento, azioni sicure, attraverso le quali si rinforza l’atteggiamento e migliorano le conoscenze. La formazione, per raggiungere i propri obiettivi, deve tuttavia agire anche sui meccanismi di conformismo sociale favorevoli alla safety, questi originano da conoscenze e azioni sicure e reciprocamente le rinforzano.

Utilità e limiti della diagnosi di patologie polmonari e pleuriche asbesto-correlate

L’apparato respiratorio rappresenta il bersaglio di numerose sostanze tossiche aerodisperse che rivestono un ruolo chiave nella patogenesi della maggior parte delle patologie polmonari e pleuriche, sia benigne che maligne. Nonostante per alcune di esse siano noti specifici fattori di rischio, le sole attività di prevenzione primaria non sono sufficienti a limitarne la diffusione. Si rende quindi necessario attuare adeguate misure di prevenzione secondaria per la diagnosi di malattie potenzialmente curabili allo stadio iniziale, in modo da aumentare l’efficacia dei trattamenti terapeutici e le possibilità di guarigione. Un approccio non invasivo per lo studio dei meccanismi fisiopatologici alla base delle patologie polmonari e pleuriche potrebbe essere effettuato anche con nuove metodiche (es. naso elettronico), al fine di identificare e validare nuovi biomarcatori per un più specifico approccio diagnostico. Il lavoro scientifico ha riguardato inizialmente l’identificazione di un indicatore o di un gruppo di indicatori dotati di potere diagnostico sufficientemente elevato per poter discriminare precocemente, nell’ambito di soggetti con pregressa esposizone ad asbesto, patologie benigne, sia polmonari che pleuriche, da patologie maligne. Successivamente l’attenzione è stata rivolta alla diagnosi precoce di patologie neoplastiche a carico del solo parenchima polmonare, valutando il potere discriminante di un pattern di composti organici volatili (VOCs, tra cui pentano, 2-metilpentano, esano, etilbenzene, eptanale e trans-2-nonenale) raccolti con metodiche non invasive e dotati di potere diagnostico tale da discriminare patologie benigne da patologie maligne potenzialmente curabili in soggetti ad alto rischio di sviluppare cancro del polmone. Infine abbiamo tentato di ottimizzare i parametri di impostazione e raccolta di un nuovo strumento: il naso elettronico. Su di esso esistono alcuni lavori in letteratura in cui ne vengono descritte le potenzialità in ambito diagnostico per il riconoscimento di specifici pattern suggestivi di patologie polmonari, sia flogistiche (TBC, BPCO) che neoplastiche (mesotelioma, NSCLC). Purtroppo nessuno di questi lavori definisce le condizioni ottimali di utilizzo, i limiti dello strumento e le interferenze di fattori ambientali e soggettivi riguardo al segnale elaborato. Il lavoro si è concentrato soprattutto sull’indagine delle condizioni ottimali di utilizzo e sull’eventuale condizionamento del segnale da parte di determinate variabili ambientali (es. umidità) o individuali (es. fumo, cibo, alcol).

Building Resilience in Young Black Males: Determining the Factors that Lead to Success for Black Men in America

It is no secret that Black men have struggled over the years to obtain the same level of high earning financial success as their White counterparts. Black men face an incredible challenge with regard to educational obtainment, career success, and physical health. Black men are often revered as the most dangerous, least educated, and more unhealthy than any other race or gender. This must change. This researcher investigated the lives of eight successful Black men with the hope of determining how they were able to attain their success. The findings of this research suggest that there are several factors that are key contributors in becoming a successful Black man in America. With a greater understanding of how Black men have managed to gain success, despite the obstacles they have faced, it is hopeful that this research will help other Black men reach the level of success that is often desired and seldom realized.