Study of superficial properties of titanium treated by PIIID

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Lubricating coating prepared by PIIID on a forming tool

In this work, the performance of a-C: H films produced by the hybrid Plasma Immersion Ion Implantation and Deposition technique as lubricating layers for a steel forming tool has been investigated. Hardened steel (AISI M2, 64 HRC) plates coated with a commercial TiN layer were used as substrates and the films were deposited in a vacuum chamber fitted with two parallel-plate electrodes. The discharges were generated in atmospheres composed of 91% C2H2 and 9% Ar by the application of radiofrequency power (13.56 MHz, 100 W) to the upper electrode while the lower one, also used as the sample holder, was biased with high voltage negative pulses (3.6 kV, 30 mu s, 300 Hz). A deposition time of 840 s was used. The effects of the gas pressure, p, on thickness, molecular structure, wettability, surface morphology and topography, hardness and friction coefficient of the films lwere investigated. Film thickness increased from 0.3 to 0.5 mu m when p was increased from 2.7 to 16.5 Pa. Generally, the films were slightly hydrophilic, with contact angles of around 84 degrees, and the deposition decreased the roughness of the steel. A polymer-like structure was detected in high pressure depositions and an amorphous carbon structure derived from the low pressure procedures. Hardness decreased from 8.2 to 7.0 GPa with increasing p. Improvement in tribological performance was indicated by the fall in the friction coefficient from 0.5 to 0.2 as the deposition pressure was reduced. Operating at the latter value (of mu) would lead to a significant reduction in wear and hence to significant economy in diverse industrial applications.

Optimal laser control of molecular photoassociation along with vibrational stabilization

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Diverse Amorphous Carbonaceous Thin Films Obtained by Plasma Enhanced Chemical Vapor Deposition and Plasma Immersion Ion Implantation and Deposition

Diverse amorphous hydrogenated carbon and similar films containing additional elements were produced by Plasma Enhanced Chemical Vapor Deposition (PECVD) and by Plasma Immersion Ion Implantation and Deposition (PIIID). Thus a-C:H, a-C:H:F, a-C:H:N, a-C:H:Cl and a-C:H:O:Si were obtained, starting from the same feed gases, using both techniques. The same deposition system supplied with radiofrequency (RF) power was used to produce all the films. A cylindrical stainless steel chamber equipped with circular electrodes mounted horizontally was employed. RF power was fed to the upper electrode; substrates were placed on the lower electrode. For PIIID negative high tension pulses were also applied to the lower electrode. Raman spectroscopy confirmed that all the films are amorphous. Chemical characterization of each pair of films was undertaken using Infrared Reflection Absorption Spectroscopy and X-ray Photoelectron Spectroscopy. The former revealed the presence of specific structures, such as C-H, C-O, O-H. The latter allowed calculation of the ratio of hetero-atoms to carbon atoms in the films, e. g. F:C, N:C, and Si:C. Only relatively small differences in elemental composition were detected between films produced by the two methods. The deposition rate in PIIID is generally reduced in relation to that of PECVD; for a-C:H:Cl films the reduction factor is almost four.

A new interpretation for the degradation phenomenon of ZnO varistors

The electrical degradation phenomena of zinc oxide-based varistors were studied using a high-energy current pulse and a.c. polarization at different temperatures. Activation energy measurements during the degradation process showed that these phenomena are associated with diffusion and that the diffusion-controlling species are slower than Zn., For degradation promoted by current pulses of 8×20 μs, the Schottky potential barrier deformation was measured. A decrease in height and width of the potential barrier due to the reduction of surface states density, N s, without a significant change in donor density, N d, was observed. To explain these results, a modification of the unstable components model is proposed for the potential barrier in which the degradation is due to oxi-reduction reactions between atomic defects. These reactions promote the elimination of zinc vacancies and/or adsorbed oxygen on the grain boundaries. © 1992 Chapman & Hall.

α-Adrenoceptor-mediated prejunctional effects of chloroethylclonidine in the canine saphenous vein

The present study was undertaken to look for the effect of chloroethylclonidine (CEC) on prejunctional alpha-2 autoreceptors of the canine saphenous vein. The effect was tested on tritium overflow evoked by electrical stimulation from tissues preloaded with 0.2 μM 3H- norepinephrine. Yohimbine (3-300 nM) and CEC (1-125 μM) increased and UK- 14,304 reduced the overflow of tritium evoked by 300 pulses (1 Hz). The maximal increase of tritium overflow caused by yohimbine was much higher than that caused by CEC: 3.82 and 1.74 times, respectively. CEC (5 μM) abolished both the inhibition caused by UK-14,304 and the enhancement of tritium overflow caused by yohimbine. However, when CEC was added after yohimbine, it reduced the electrically evoked overflow of tritium, the maximal effect being a reduction of tritium overflow by 35%. Prazosin (1-100 nM) did not change either the inhibitory effect of UK-14,304 or the facilitatory effect of CEC. These results suggest that CEC acts on two different subtypes of prejunctional alpha-2 autoreceptors; on one of them it acts as an antagonist and increases the electrically evoked overflow of tritium (and inhibits both the effect of UK-14,304 and yohimbine); on the other it acts as an agonist and reduces the electrically evoked overflow of tritium. Alternatively, one can admit that CEC is able to inhibit alpha-2 autoreceptors, which causes an increase of the transmitter release, and to activate a nonadrenergic inhibitory receptor thus causing a reduction of the transmitter release.

Spatial and temporal heterogeneity in the Jurumirim Reservoir, São Paulo, Brazil

Jurumirim is a large tropical reservoir with remarkable spatial gradients. This structure seems to be determined by a longitudinal gradient in the trophic conditions along the main axis of the reservoir. Nutrient-rich waters enter from the main tributary river, Paranapanema, and towards the dam there is a lacustrine zone that is deeper and more oligotrophic. Additional variability is derived from two important lateral components: the entrance of the Taquari River, the second largest tributary, bringing waters with higher pH and alkalinity; and the Ribeirão das Posses arm, a sheltered bay where the hydrodynamic conditions promote a high growth of phytoplankton. However, such a spatial pattern is not static. It can become either more defined, during the dry season (late autumn and winter), or less evident, during the expansion of the lotic conditions in the rainy period (late spring and summer). Seasonal processes of stratification/destratification determine the temporal changes in the lacustrine zone but, unlike the upstream regions, the dam zone of the reservoir seems to be little affected by periodic pulses of modifications produced by intensive rains. The presence of extensive wetlands and oxbow lagoons in the mouth zones of the main rivers also constitutes an important source of spatial variability and should be considered in the future.

Pharmacological evidence for β2-adrenoceptor in right atria from stressed female rats

The purpose of the present study was to demonstrate a physiological response to TA2005, a potent β2-adrenoceptor (β2-AR) selective agonist, in right atria isolated from stressed female rats under the influence of the estrous cycle. We obtained concentration-response curves to the agonist in the presence and in the absence of selective antagonists in right atria isolated from female rats submitted to three daily foot-shock sessions (30 min duration, 120 pulses of 1.0 mA, 1.0 s, applied at random intervals of 5- 25 s) and sacrificed at estrus or diestrus. Our results showed that the pD2 values of TA2005 were not influenced by estrous cycle phase or foot-shock stress. However, in right atria from stressed rats sacrificed during diestins, the concentration-response curve to TA2005 was biphasic, with a response being obtained at concentrations of 0.1 nM, whereas during estrus no response was observed at doses lower than 3 nM. ICI118,551, a β2-AR antagonist, abolished the response to nanomolar concentrations of TA2005 in right atria from stressed rats at diestrus, with no changes in agonist pD2 values in right atria from control rats (7.47 ± 0.09, p > 0.05) but a 3-fold decrease in pD2 values of TA2005 in right atria from foot shock stressed rats (7.90 ± 0.07, p ≤ 0.05). Concentration-response curves to TA2005 in the presence of ICI118,551 were best fitted by a one-site model equation. The β1-AR antagonist, CGP20712A, shifted to the right only the second part of the concentration-response curves to the agonist, unmasking the putative β2-AR-mediated response to the agonist in tissues isolated from stressed rats at diestrus. Under this condition, concentration-response curves to the agonist were best fitted by a two-site model equation, pD2 and maximum response of TA2005 interaction with β1- and putative β2-adrenoceptor components were calculated. Schild analyses gave a pK(B) value for CGP20712A that was typical for the interaction with β1-AR in each experimental group, pK(B) values for ICI118,551 could not be obtained in stressed rats sacrificed at diestins since Schild plot slopes were lower than 1.0. In right atria from control rats, ICI118,551 pK(B) values were similar to reported values for the interaction of the antagonist with β1-AR. These results confirm that a heterogenous β1-AR population mediating the chronotropic response to catecholamines can be demonstrated in right atria from foot shock stressed female rats sacrificed at diestins. The stress-induced response seems to be mediated by the β2-AR subtype. Right atria from rats sacrificed during estrus are protected against stress-induced alterations on the homogeneity of β-AR population.

New species of Eleutherodactylus (Amphibia: Leptodactylidae) from Guaraquecaba, Atlantic Forest of Brazil

A new species of the leptodactylid frog genus Eleutherodactylus is described from Guaraquecaba, State of Parana, southern Brazil. The new species is characterized by its large size, slightly rugose to rugose dorsal skin texture, robust body, and low number of pulses per call. Descriptions of the advertisement calls of the new species and of E. manezinho, a close related species, are provided, as well as information on natural history.

An improved three-dimensional model for growth of oxide films induced by laser heating

In this paper we consider a three-dimensional heat diffusion model to explain the growth of oxide films which takes place when a laser beam is shined on and heats a metallic layer deposited on a glass substrate in a normal atmospheric environment. In particular, we apply this model to the experimental results obtained for the dependence of the oxide layer thickness on the laser density power for growth of TiO2 films grown on Ti-covered glass slides. We show that there is a very good agreement between the experimental results and the theoretical predictions from our proposed three-dimensional model, improving the results obtained with the one-dimensional heat diffusion model previously reported. Our theoretical results also show the occurrence of surface cooling between consecutive laser pulses, and that the oxide track surface profile closely follows the spatial laser profile indicating that heat diffusive effects can be neglected in the growth of oxide films by laser heating. © 2001 Elsevier Science B.V.

One-dimensional analytical model for oxide thin film growth on Ti metal layers during laser heating in air

This paper presents the theoretical and experimental results for oxide thin film growth on titanium films previously deposited over glass substrate. Ti films of thickness 0.1 μm were heated by Nd:YAG laser pulses in air. The oxide tracks were created by moving the samples with a constant speed of 2 mm/s, under the laser action. The micro-topographic analysis of the tracks was performed by a microprofiler. The results taken along a straight line perpendicular to the track axis revealed a Gaussian profile that closely matches the laser's spatial mode profile, indicating the effectiveness of the surface temperature gradient on the film's growth process. The sample's micro-Raman spectra showed two strong bands at 447 and 612 cm -1 associated with the TiO 2 structure. This is a strong indication that thermo-oxidation reactions took place at the Ti film surface that reached an estimated temperature of 1160 K just due to the action of the first pulse. The results obtained from the numerical integration of the analytical equation which describes the oxidation rate (Wagner equation) are in agreement with the experimental data for film thickness in the high laser intensity region. This shows the partial accuracy of the one-dimensional model adopted for describing the film growth rate. © 2001 Elsevier Science B.V.

Simulation of active control using fuzzy logic applied to a pulse combustor

This work analyzes an active fuzzy logic control system in a Rijke type pulse combustor. During the system development, a study of the existing types of control for pulse combustion was carried out and a simulation model was implemented to be used with the package Matlab and Simulink. Blocks which were not available in the simulator library were developed. A fuzzy controller was developed and its membership functions and inference rules were established. The obtained simulation showed that fuzzy logic is viable in the control of combustion instabilities. The obtained results indicated that the control system responded to pulses in an efficient and desirable way. It was verified that the system needed approximately 0.2 s to increase the tube internal pressure from 30 to 90 mbar, with an assumed total delay of 2 ms. The effects of delay variation were studied. Convergence was always obtained and general performance was not affected by the delay. The controller sends a pressure signal in phase with the Rijke tube internal pressure signal, through the speakers, when an increase the oscillations pressure amplitude is desired. On the other hand, when a decrease of the tube internal pressure amplitude is desired, the controller sends a signal 180° out of phase.

Root instrumentation with an erbium:yttrium-aluminum-garnet laser: Effect on the morphology of fibroblasts

Objective: The purpose of this study was to evaluate the effect of erbium:yttrium-aluminum-garnet laser instrumentation of root surfaces on the morphology of fibroblasts from continuous lineage. Method and materials: Dentinal slices with 4 mm2 of surface area were obtained from teeth extracted for severe periodontal involvement. Specimens were assigned to one of three treatment groups: group 1, application of the laser with an energy level of 250 mJ at 103 pulses per second; group 2, application of the laser with an energy level of 80 mJ at 166 pulses per second; and group 3, similar to group 2, but with concomitant water irrigation of the device. The specimens were incubated in multiwell plates containing cell culture media. After 24 hours, the specimens were submitted to routine preparation for scanning electron microscopy. Three independent and blind examiners used photomicrographs to evaluate the morphology of the fibroblasts: 0 = without cells; 1 = flat cells; 2 = round cells; and 3 = combination of round and flat cells. Results: Statistical analysis indicated that there were significant differences among treatment groups and that group 3 was significantly different from groups 1 and 2. Conclusion: There was no difference between groups 1 and 2 in the morphology of fibroblasts. Laser instrumentation with concomitant irrigation impaired the adhesion of fibroblasts to dentinal surfaces.

Sensitivity of AMPA receptor channel to calcium oscillations: A computational study

We used a computational model of biochemical pathways that are involved in the phosphorylation/dephosphorylation of AMPA receptor to study the receptor responses to calcium oscillations. In the model, the biochemical pathways are assumed to be located immediately under the postsynaptic membrane and we included three states of AMPA receptor: dephosphorylated, and phosphorylated in one or in two sites. To characterize the effects of calcium oscillations on the AMPA receptor, we exposed the model to stimuli with three varying parameters, namely frequency, number of pulses and calcium spike duration. Our model showed sensitivity to all of these three parameters. © 2002 Elsevier Science B.V. All rights reserved.

Acute reduction in serum progesterone concentrations after feed intake in dairy cows

This study tested the hypothesis that high feed consumption will acutely decrease circulating progesterone concentrations. In the first experiment, a Latin Square design was used to test whether feeding pattern would alter circulating progesterone in pregnant lactating Holstein cows (n = 12). Feed was removed for 12 h before the experiment and cows were then either fed 100% of the total mixed ration (TMR), 50% of TMR every 12 h, 25% of TMR every 6 h, or left unfed for an additional 12 h. Blood samples were taken every hour for 24 h. Provision of 100 or 50% of TMR decreased circulating progesterone by 1 h after feeding and progesterone remained depressed until 8-9 h after feeding. Feeding 25% of TMR did not reduce circulating progesterone concentrations. Experiment 2 used a crossover design to measure the effect of acute feeding on circulating progesterone and LH concentrations during delivery of a constant amount of exogenous progesterone (Eazi-Breed CIDRs) in lactating Holstein cows (n = 8) and nonpregnant dry Holstein cows (n = 6). Blood samples were taken every 15 min for 8 h. There was no change in serum progesterone during the 8 h treatment period in unfed cows; however, feeding decreased (P < 0.05) circulating progesterone between 2 and 6 h after feeding. In lactating cows, feeding increased mean LH (P < 0.05). There were more LH pulses (P = 0.01) in lactating than nonlactating cows. Thus, acute feeding reduced circulating progesterone in pregnant lactating cows apparently due to an increase in progesterone metabolism. Interestingly, feeding multiple smaller meals eliminated the acute effect of feeding on circulating progesterone. © 2003 Published by Elsevier B.V.