Caracterização de compósitos produzidos por VARTM para aplicações aeronáuticas

In recent years the aeronautic industries has increased investment in areas of technological research aiming at materials that offer better performance, safety, weight reduction and fuel consumption. For this reason the most studied materials are polymeric materials, due to their higher mechanical strength and higher stiffness. This work evaluated characteristics of two composite laminates produced from the same process, but they differed only in regions where the resin was injected and the vacuum position. The composite laminates were SC-79 resin reinforced with glass fiber fabric (plain weave) processed via VARTM. For this reason the material was subjected to mechanical tests such as: tensile, and fatigue following standards ASTM D 3039 and ASTM D 3479, respectively. The latter was observed the S-N curve. It was performed the ultrassonic C-scan analysis to check impregnation of the fiber. Considering that the process was the same for the two laminates, with small variations in the injection and in vacum ports, it was expected to find similar characteristics

Estudo da transmissão esportiva na televisão brasileira

ports is an editorial present in every and any large scale news company, wheter it print, radio, television or web. However, their approach is made differently from other editorials, they have more freedom and constant use of elements that soften the text, leaving it close to entertainment. There fore, this work seeks to analyze and understand the sports broadcasting, which on the Brazilian television is usually limitate to the football. To perform the project of the conclusion of major, there was a need to study how the sport broke into television, how the sports broadcast is carried out by television media, which are the elements used for their coverage of sports events, especially football ones, and the effects that this broadcasting causes in society

Simulação do tempo de descarga de caminhões graneleiros em uma estação de transbordo de carga em Porto Murtinho, MS

In the current decade, inter modal transport is widely discussed. In Brazil road transport is used in excess whereas there could be more focus and investment towards water transport. Water transport presents many benefits like being low cost and low maintenance. Sea and river ports today aren't capable of supporting Brazil's transport needs. Therefore, with this obstacle, this paper consists of an attempt of modeling and simulation of the process of unloading grain cargo from trucks, through simulation with ProModel software, to verify the necessity of installing more tumblers at the cargo unloading station in Porto Murtinho, MS

Resolução do problema de carregamento e descarregamento de contêineres em terminais portuários via Beam Search

One problem that has been happening frequently in port terminals is the poor planning of the loading and unloading of containers. The reason of this problem is the lack of an efficient method that provides the best means of these operations. The main goal of this work is, to implement a method that provides the best ways to perform the loading and unloading of containers, at each port and thus bring a great saving for these terminals, since the number of moves is directly proportional to cost. To carry out this program was used the idea that the containers are placed in vertical stacks, where the access can be done only by the top of the stack, so the ship was treated as an matrix and to fill it, two rules were created for loading and two for unloading. To obtain the best sequence of rules was used Beam Search method, which is an enumeration type implicit method that analyzes only the best solution of the tree generated. Thus, the program developed in the Java language, provides the best way to perform the loading and unloading ports and the way as the ship leaves each port using a graphical interface

Proposta de traçado de alcoolduto ligando a hidrovia Tietê Paraná à refinaria do planalto paulista com uso de avaliação multicritérios e geotecnologias

From the beginning of the century, with the advent of the flex fuel car, successor fluctuations in oil prices and the rise of awareness of the impending shortage of fossil fuels, the alcohol sector begins to reappear in the panorama of national economy making Brasill reaches the point of becoming a leading exporter of this product. Ethanol assumed the role of such importance in Brazilian exports, which Petrobras through the Growth Acceleration Program (PAC) has made investments in the Brazilian pipeline network to better ensure the production of ethanol to major ports. The means of transport in pipelines are safe and inexpensive, but require careful evaluation in its implementation, they may lead to negative social and environmental impacts. Thus, the purpose of this project is to propose the best route for an ethanol pipeline connectin the Tietê-Paraná, leaving the municipality of Santa Maria da Serra (SP), to the Planalto Paulista Refinery (REPLAN), located in Paulinia (SP), belonging to the passage of ethanol export corridor, currently under revelopment. The technique used for the development of the stroke is the association of multicriteria evaluation, the geographical information system (SIG) and geotechnologies. This study presented three possible layouts for the ethanol pipeline, highlighting the best option, in addition, demonstrated the suitability of the area to receive projects of similar nature to a pipeline

Desenvolvimento de solução para o problema de alocação de navios em berços de terminais portuários: aplicação de algoritmos genéticos e otimização por nuvens de partículas

This work proposes two optimization algorithms for the solution of the Berth Allocation Problem (PAB). Due to the economic development of the country, it became necessary for the improvement of means of transport, which mainly shipping. For this, you need a better system management port, you will receive a lot of ships carrying cargo. In this work the PAB is approached so that the goals are to reduce costs and time handling in ports. For this, we applied two computational techniques, genetic algorithms and optimization for cloud particles, to obtain the best results for this problem. The results obtained with each type of algorithm are compared to conclude which method is more efficient for the port system

Implementação de um sistema de informação voltado à sensibilidade ambiental ao óleo do litoral sul paulista e avaliação das ações de resposta a derramamentos de óleo

Oil spills cause serious damage to the cost life and environments. Those impacts affect ecologic and socio-economic resources (like fishing and tourism). Within this background, response actions have two main objectives: the contaminant removal, with the less additional impacts, and enhance environment restoration in order to make this process complete in the shortest time possible. The present work proposes to contribute for the emergency environmental management in cases of oil spills by systematization of relevant information for oil spill environmental sensitivity maps. The next stage was to insert all these data on a geographic database, which allows data access by web. Beside that, this work aimed to recommend suitable clean-up techniques for the ecosystems located on the study area, composed by the municipalities: Praia Grande, Mongaguá, Itanhaém and Peruíbe, belonging to Baixada Santista and Iguape, Cananéia and Ilha Comprida, south cost of São Paulo state. This area is situated between two important Brazilian ports: Santos and Paranaguá, and that make it under considerable accident risks. The results were all data inserted on the geodatabase and available to user recover the information by web consulting. With that, this work wishes to contribute to individual emergencial planning of the region.

WSPControl: aplicação distribuída baseada em Web Services para monitoramento remoto de computadores

The tool proposed, known as WSPControl, enables remote monitoring of computers across the Internet using distributed applications. Through a Web Services architecture is possible the communication between these distributed applications across heterogeneous platforms, also eliminates the need for additional settings in computer networks, such as release of ports or proxy. The tool is divided into three modules, namely: • Client Interface: developed in C Sharp, is responsible for capturing data on performance of the monitored computer also connects to the Web Services to report this data. • Web Services Interface: developed in PHP using the PHP SOAP library, is responsible for facilitating the communication between internet applications and client. • Internet Interface: developed in PHP, is responsible for reading and interpreting the information captured these available on the Internet

Alocação de modem PLC utilizando SNR em uma rede elétrica de baixa tensão

Pós-graduação em Engenharia Elétrica - FEIS

Museus ferroviários do Estado de Sao Paulo (Brasil): as políticas de conservação e o estado atual do patrimônio ferroviário brasileiro

This paper is to discuss the expansion and partly dismantlement of Brazilian merchant marine, tracking their legal, administrative and planning. The analysis period extends from the formation of the Comissão da Marinha Mercante, 1941, to the end of the government of Fernando Henrique Cardoso, 2002. In this long duration it is discussed the formation of the national system of economy and the dynamics of contradictory national merchant navy. The text is divided into two parts: 1) Expansion: The centralization, the planning and nationalization with the formation of the shipbuilding industry, highlighting the actions of the Comissão da Marinha Mercante and the Superintendência Nacional da Marinha Mercante, planning and financing the national navigation; 2) Demolition part: the denationalization and privatization of the national navigation, in addition to the deep restructuring of the shipbuilding industry, highlighting the creation of the Agência Nacional de Transporte Aquaviários during the last years of Fernando Henrique Cardoso government.

Discontinuous Waveband Switching in WDM Optical Networks

Routing techniques used in wavelength routed optical networks (WRN) do not give an efficient solution with Waveband routed optical networks (WBN) as the objective of routing in WRN is to reduce the blocking probability and that in WBN is to reduce the number of switching ports. Routing in WBN can be divided two parts, finding the route and grouping the wavelength assigned into that route with some existing wavelengths/wavebands. In this paper, we propose a heuristic for waveband routing, which uses a new grouping strategy called discontinuous waveband grouping to group the wavelengths into a waveband. The main objective of our algorithm is to decrease the total number of ports required and reduce the blocking probability of the network. The performance of the heuristic is analyzed using simulation on a WBN with non-uniform wavebands.

A Load-Balancing Shared-Protection-Path Reconfiguration Approach in WDM Wavelength-Routed Networks

Wavelength-routed networks (WRN) are very promising candidates for next-generation Internet and telecommunication backbones. In such a network, optical-layer protection is of paramount importance due to the risk of losing large amounts of data under a failure. To protect the network against this risk, service providers usually provide a pair of risk-independent working and protection paths for each optical connection. However, the investment made for the optical-layer protection increases network cost. To reduce the capital expenditure, service providers need to efficiently utilize their network resources. Among all the existing approaches, shared-path protection has proven to be practical and cost-efficient [1]. In shared-path protection, several protection paths can share a wavelength on a fiber link if their working paths are risk-independent. In real-world networks, provisioning is usually implemented without the knowledge of future network resource utilization status. As the network changes with the addition and deletion of connections, the network utilization will become sub-optimal. Reconfiguration, which is referred to as the method of re-provisioning the existing connections, is an attractive solution to fill in the gap between the current network utilization and its optimal value [2]. In this paper, we propose a new shared-protection-path reconfiguration approach. Unlike some of previous reconfiguration approaches that alter the working paths, our approach only changes protection paths, and hence does not interfere with the ongoing services on the working paths, and is therefore risk-free. Previous studies have verified the benefits arising from the reconfiguration of existing connections [2] [3] [4]. Most of them are aimed at minimizing the total used wavelength-links or ports. However, this objective does not directly relate to cost saving because minimizing the total network resource consumption does not necessarily maximize the capability of accommodating future connections. As a result, service providers may still need to pay for early network upgrades. Alternatively, our proposed shared-protection-path reconfiguration approach is based on a load-balancing objective, which minimizes the network load distribution vector (LDV, see Section 2). This new objective is designed to postpone network upgrades, thus bringing extra cost savings to service providers. In other words, by using the new objective, service providers can establish as many connections as possible before network upgrades, resulting in increased revenue. We develop a heuristic load-balancing (LB) reconfiguration approach based on this new objective and compare its performance with an approach previously introduced in [2] and [4], whose objective is minimizing the total network resource consumption.

Electric Ventilation: indications for and technical aspects of diaphragm pacing stimulation surgical implantation

Objective: Patients with high cervical spinal cord injury are usually dependent on mechanical ventilation support, which, albeit life saving, is associated with complications and decreased life expectancy because of respiratory infections. Diaphragm pacing stimulation (DPS), sometimes referred to as electric ventilation, induces inhalation by stimulating the inspiratory muscles. Our objective was to highlight the indications for and some aspects of the surgical technique employed in the laparoscopic insertion of the DPS electrodes, as well as to describe five cases of tetraplegic patients submitted to the technique. Methods: Patient selection involved transcutaneous phrenic nerve studies in order to determine whether the phrenic nerves were preserved. The surgical approach was traditional laparoscopy, with four ports. The initial step was electrical mapping in order to locate the "motor points" (the points at which stimulation would cause maximal contraction of the diaphragm). If the diaphragm mapping was successful, four electrodes were implanted into the abdominal surface of the diaphragm, two on each side, to stimulate the branches of the phrenic nerve. Results: Of the five patients, three could breathe using DPS alone for more than 24 h, one could do so for more than 6 h, and one could not do so at all. Conclusions: Although a longer follow-up period is needed in order to reach definitive conclusions, the initial results have been promising. At this writing, most of our patients have been able to remain ventilator-free for long periods of time.

Rapid assessment survey for exotic benthic species in the São Sebastião Channel, Brazil

The study of biological invasions can be roughly divided into three parts: detection, monitoring, mitigation. Here, our objectives were to describe the marine fauna of the area of the port of São Sebastião (on the northern coast of the state of São Paulo, in the São Sebastião Channel, SSC) to detect introduced species. Descriptions of the faunal community of the SSC with respect to native and allochthonous (invasive or potentially so) diversity are lacking for all invertebrate groups. Sampling was carried out by specialists within each taxonomic group, in December 2009, following the protocol of the Rapid Assessment Survey (RAS) in three areas with artificial structures as substrates. A total of 142 species were identified (61 native, 15 introduced, 62 cryptogenic, 4 not classified), of which 17 were Polychaeta (12, 1, 1, 3), 24 Ascidiacea (3, 6, 15, 0), 36 Bryozoa (17, 0, 18, 1), 27 Cmdana (2, 1, 24, 0), 20 Crustacea (11, 4, 5, 0), 2 Entoprocta (native), 16 Mollusca (13, 3, 0, 0). Twelve species are new occurrences for the SSC. Among the introduced taxa, two are new for coastal Brazil. Estimates of introduced taxa are conservative as the results of molecular studies suggest that some species previously considered cryptogenic are indeed introduced. We emphasize that the large number of cryptogenic species illustrates the need for a long-term monitoring program, especially in areas most susceptible to bioinvasion. We conclude that rapid assessment studies, even in relatively well-known regions, can be very useful for the detection of introduced species and we recommend that they be carried out on a larger scale in all ports with heavy ship traffic.

Study of the infrastructures and the fishing power in Gran Canaria

Máster en Gestión Sostenible de Recursos Pesqueros