Effect of the Insertion and Polymerization Technique in Composite Resin Restorations: Analysis of Marginal Gap by Atomic Force Microscopy

This in vitro study evaluated the marginal gap at the composite tooth/resin interface in class V cavities under the influence of two insertion techniques and a curing system by means of atomic force microscopy (AFM). Forty enamel and dentin cavities were prepared on the buccal surface in bovine teeth with quadratic forms measuring 2 mm X 2 mm and depth of 1.5 mm. The teeth were then divided into four groups: group A, 10 cavities were restored in one increment, light cured by halogen light; group B, 10 cavities filled with bulk filling, light cured by the light emitting diodes (LED); group C, 10 cavities were restored by the incremental technique, light cured by halogen light; group D, 10 cavities were restored by the incremental technique, light cured by the LED. The teeth underwent the polishing procedure and were analyzed by AFM for tooth/restoration interface evaluation. The data were compared between groups using the nonparametric Kruskall-Wallis and Mann-Whitney tests (p < 0.05). The results showed a statistically significant difference between groups A and B and groups A and C. It was concluded that no insertion and polymerization technique was able to completely seal the cavity.

Serotonergic mechanism of the lateral parabrachial nucleus and relaxin-induced sodium intake

It has been shown that central or peripheral injections of the peptide relaxin induces water intake, not sodium intake in rats. Important inhibitory mechanisms involving serotonin and other neurotransmitters in the control of water and NaCl intake have been demonstrated in the lateral parabrachial nucleus (LPBN). In the present Study, we investigated the effects of bilateral injections of methysergide (serotonergic receptor antagonist) into the LPBN on intracerebroventricular (i.c.v.) relaxin-induced water and NaCl intake in rats. Additionally, the effect of the blockade of central angiotensin AT(1) receptors with i.c.v. losartan on relaxin-induced water and NaCl intake in rats treated with methysergide into the LPBN was also investigated. Male Holtzman rats with cannulas implanted into the lateral ventricle (LV) and bilaterally in the LPBN were used. Intracerebroventricular injections of relaxin (500 ng/l mul) induced water intake (5.1+/-0.7 ml/120 min), but not significant 1.8% NaCl intake (0.5+/-0.4 ml/120 min). Bilateral injections of methysergide (4 mug/0.2 mul) into the LPBN strongly stimulated relaxin-induced 1.8% NaCl intake (34.5+/-10.9 ml/120 min) and slightly increased water intake (10.5+/-4.9 ml/120 min). The pretreatment with i.c.v. losartan (100 mug/l mul) abolished the effects of i.c.v. relaxin combined with LPBN methysergide on 1.8% NaCI intake (0.5+/-0.4 ml/120 min). Losartan (100 mug/l mul) also abolished relaxin-induced water intake in rats injected with methysergide into the LPBN (1.6+/-0.8 ml/120 min) or not (0.5+/-0.3 ml/120 min). Losartan (50 mug/l mul) partially reduced the effects of relaxin. The results show that central relaxin interacting with central angiotensinergic mechanisms induces NaCl intake after the blockade of LPBN serotonergic mechanisms. (C) 2004 Elsevier B.V. All rights reserved.

Important GABAergic mechanism within the NTS and the control of sympathetic baroreflex in SHR

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Flexural strength of acrylic resin repairs processed by different methods: water bath, microwave energy and chemical polymerization

Denture fractures are common in daily practice, causing inconvenience to the patient and to the dentists. Denture repairs should have adequate strength, dimensional stability and color match, and should be easily and quickly performed as well as relatively inexpensive. Objective: The aim of this study was to evaluate the flexural strength of acrylic resin repairs processed by different methods: warm water-bath, microwave energy, and chemical polymerization. Material and methods: Sixty rectangular specimens (31x10x2.5 mm) were made with warm water-bath acrylic resin (Lucitone 550) and grouped (15 specimens per group) according to the resin type used to make repair procedure: 1) specimens of warm water-bath resin (Lucitone 550) without repair (control group); 2) specimens of warm water-bath resin repaired with warm water-bath; 3) specimens of warm water-bath resin repaired with microwave resin (Acron MC); 4) specimens of warm water-bath resin repaired with autopolymerized acrylic resin (Simplex). Flexural strength was measured with the three-point bending in a universal testing machine (MTS 810 Material Test System) with load cell of 100 kgf under constant speed of 5 mm/min. Data were analyzed statistically by Kruskal-Wallis test (p<0.05). Results: The control group showed the best result (156.04 +/- 1.82 MPa). Significant differences were found among repaired specimens and the results were decreasing as follows: group 3 (43.02 +/- 2.25 MPa), group 2 (36.21 +/- 1.20 MPa) and group 4 (6.74 +/- 0.85 MPa). Conclusion: All repaired specimens demonstrated lower flexural strength than the control group. Repairs with autopolymerized acrylic resin showed the lowest flexural strength.

Leachability of degradation products from hard chairside reline resins in artificial saliva: effect of water-bath post-polymerization treatment

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of water-bath post-polymerization on the mechanical properties, degree of conversion, and leaching of residual compounds of hard chairside reline resins

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of different light sources and photo-activation methods on degree of conversion and polymerization shrinkage of a nanocomposite resin

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of different dental composite resins on the polymerization process

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Crystal structures of BnSP-7 and BnSP-6, two Lys49-phospholipases A(2): quaternary structure and inhibition mechanism insights

Phospholipases A(2) are components of Bothrops venoms responsible for disruption of cell membrane integrity via hydrolysis of its phospholipids. A class of PLA(2)-like proteins has been described which despite PLA(2) activity on artificial substrate, due to a D49K mutation, is still highly myonecrotic. This work reports the X-ray structure determination of two Lys49-PLA(2)s from Bothrops neuwiedi pauloensis (BnSP-7 and BnSP-6) and, for the first time, the comparison of eight dimeric Lys49-PLA2s. This comparison reveals that there are not just two (open and closed) but at least six different conformations. The binding of fatty acid observed in three recent Lys49-PLA(2) structures seems to be independent of their quaternary conformation. Cys29 polarization by Lys122 is not significant for BnSP-7 and BnSP-6 or other structures not bound by fatty acids. These structures may be in an active state when nothing is bound to them and the Lys122/Cys29 interactions are weak or absent. (C) 2003 Elsevier B.V. All rights reserved.

Crystal structure of a myotoxic Asp49-phospholipase A(2) with low catalytic activity: Insights into Ca2+ -independent catalytic mechanism

A myotoxic Asp49-phospholipase A(2) (Asp49-PLA(2)) with low catalytic activity (BthTX-II from Bothrops jararacussu venom) was crystallized and the molecular-replacement solution has been obtained with a dimer in the asymmetric unit. The quaternary structure of BthTX-II resembles the myotoxic Asp49-PLA2 PrTX-III (piratoxin III from B. pirajai venom) and all non-catalytic and myotoxic dimeric Lys49-PLA(2)s. Despite of this, BthTX-II is different from the highly catalytic and non-myotoxic BthA-I (acidic PLA(2) from B. jararacussu) and other Asp49-PLA(2)s. BthTX-II structure showed a severe distortion of calcium-binding loop leading to displacement of the C-terminal region. Tyr28 side chain, present in this region, is in an opposite position in relation to the same residue in the catalytic activity Asp49-PLA(2)s, making a hydrogen bond with the atom 0 delta 2 of the catalytically active Asp49, which should coordinate the calcium. This high distortion may also be confirmed by the inability of BthTX-II to bind Na+ ions at the Ca2+-binding loop, despite of the crystallization to have occurred in the presence of this ion. In contrast, other Asp49-PLA(2)s which are able to bind Ca2+ ions are also able to bind Na+ ions at this loop. The comparison with other catalytic, non-catalytic and inhibited PLA(2)s indicates that the BthTX-II is not able to bind calcium ions; consequently, we suggest that its low catalytic function is based on an alternative way compared with other PLA(2)s. (c) 2008 Elsevier B.V All rights reserved.

Involvement of Glutathione, Sulfhydryl Compounds, Nitric Oxide, Vasoactive Intestinal Peptide, and Heat-Shock Protein-70 in the Gastroprotective Mechanism of Croton cajucara Benth. (Euphorbiaceae) Essential Oil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The Mechanism of Oocyte Activation Influences the Cell Cycle-Related Genes Expression During Bovine Preimplantation Development

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)