Implementation of sustainable evidence-based practice for the assessment and management of pain in residential aged care facilities

Pain is common in residential aged care facilities (RACFs). In 2005, the Australian Pain Society developed 27 recommendations for good practice in the identification, assessment, and management of pain in these settings. This study aimed to address implementation of the standards and evaluate outcomes. Five facilities in Australia participated in a comprehensive evaluation of RACF pain practice and outcomes. Pre-existing pain management practices were compared with the 27 recommendations, before an evidence-based pain management program was introduced that included training and education for staff and revised in-house pain-management procedures. Post-implementation audits evaluated the program's success. Aged care staff teams also were assessed on their reports of self-efficacy in pain management. The results show that before the implementation program, the RACFs demonstrated full compliance on 6 to 12 standards. By the project's completion, RACFs demonstrated full compliance with 10 to 23 standards and major improvements toward compliance in the remaining standards. After implementation, the staff also reported better understanding of the standards (p < .001) or of facility pain management guidelines (p < .001), increased confidence in therapies for pain management (p < .001), and increased confidence in their training to assess pain (p < .001) and recognize pain in residents with dementia who are nonverbal (p = .003). The results show that improved evidence-based practice in RACFs can be achieved with appropriate training and education. Investing resources in the aged care workforce via this implementation program has shown improvements in staff self-efficacy and practice.

Supporting residents’ expression of sexuality : the initial construction of a sexuality assessment tool for residential aged care facilities

Background: Sexuality is a key component of quality of life and well-being and a need to express one’s sexuality continues into old age. Staff and families in residential aged care facilities often find expressions of sexuality by residents, particularly those living with dementia, challenging and facilities often struggle to address individuals’ needs in this area. This paper describes the development of an assessment tool which enables residential aged care facilities to identify how supportive their organisation is of all residents’ expression of their sexuality, and thereby improve where required. Methods: Multi-phase design using qualitative methods and a Delphi technique. Tool items were derived from the literature and verified by qualitative interviews with aged care facility staff, residents and families. The final item pool was confirmed via a reactive Delphi process. Results: A final item pool of sixty-nine items grouped into seven key areas allows facilities to score their compliance with the areas identified as being supportive of older people’s expression of their sexuality in a residential aged care environment. Conclusions: The sexuality assessment tool (SexAT) guides practice to support the normalization of sexuality in aged care homes and assists facilities to identify where enhancements to the environment, policies, procedures and practices, information and education/training are required. The tool also enables facilities to monitor initiatives in these areas over time.

Development of an electronic role-play assessment initiative in bioscience for nursing students

Devising authentic assessments for subjects with large enrolments is a challenge. This study describes an electronic role-play assessment for approximately 600 first-year nursing students to learn and apply pathophysiology (bioscience) concepts to nursing practice. Students used Microsoft Office PowerPoint® to prepare electronic role-plays both between a nurse and patient, and between two nurses, thus simulating workplace scenarios. Student feedback demonstrated that respondents found this assessment useful for learning pathophysiology, and for applying pathophysiology to a nursing clinical setting. This electronic presentation circumvented issues associated with a traditional oral presentation such as embarrassment and logistics of scheduling groups, and rated well with students of non-English speaking background. The electronic role-play assessment initiative encouraged students to apply their bioscience knowledge to a clinical setting, and allowed students to conceptualise the importance of bioscience within both the nursing degree and the profession.

Evaluation of legal capacity by doctors and lawyers : the need for collaborative assessment

• Balancing the interests of individual autonomy and protection is an escalating challenge confronting an ageing Australian society. • One way this is manifested is in the current ad hoc and unsatisfactory way that capacity is assessed in the context of wills, enduring powers of attorney and advance health directives. • The absence of nationally accepted assessment guidelines results in terminological and methodological miscommunication and misunderstanding between legal and medical professionals. • Expectations between legal and medical professionals can be clarified to provide satisfactory capacity assessments based upon the development of a sound assessment paradigm

Teachers using annotations to engage students in assessment conversations : recontextualising knowledge

Assessment for Learning practices with students such as feedback, and self- and peer assessment are opportunities for teachers and students to develop a shared understanding of how to create quality learning performances. Quality is often represented through achievement standards. This paper explores how primary school teachers in Australia used the process of annotating work samples to develop shared understanding of achievement standards during their curriculum planning phase, and how this understanding informed their teaching so that their students also developed this understanding. Bernstein's concept of the pedagogic device is used to identify the ways teachers recontextualised their assessment knowledge into their pedagogic practices. Two researchers worked alongside seven primary school teachers in two schools over a year, gathering qualitative data through focus groups and interviews. Three general recontextualising approaches were identified in the case studies; recontextualising standards by reinterpreting the role of rubrics, recontextualising by replicating the annotation process with the students and recontextualising by reinterpreting practices with students. While each approach had strengths and limitations, all of the teachers concluded that annotating conversations in the planning phase enhanced their understanding, and informed their practices in helping students to understand expectations for quality.

An accuracy assessment of ASTER stereo images-derived digital elevation model by using rational polynomial coefficient model

The along-track stereo images of Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) sensor with 15 m resolution were used to generate Digital Elevation Model (DEM) on an area with low and near Mean Sea Level (MSL) elevation in Johor, Malaysia. The absolute DEM was generated by using the Rational Polynomial Coefficient (RPC) model which was run on ENVI 4.8 software. In order to generate the absolute DEM, 60 Ground Control Pointes (GCPs) with almost vertical accuracy less than 10 meter extracted from topographic map of the study area. The assessment was carried out on uncorrected and corrected DEM by utilizing dozens of Independent Check Points (ICPs). Consequently, the uncorrected DEM showed the RMSEz of ± 26.43 meter which was decreased to the RMSEz of ± 16.49 meter for the corrected DEM after post-processing. Overall, the corrected DEM of ASTER stereo images met the expectations.

Generation and assessment of accuracy of Digital Elevation Model by using Pcigeomatica (10.3)

This study aims to assess the accuracy of Digital Elevation Model (DEM) which is generated by using Toutin’s model. Thus, Toutin’s model was run by using OrthoEngineSE of PCI Geomatics 10.3.Thealong-track stereoimages of Advanced Spaceborne Thermal Emission and Reflection radiometer (ASTER) sensor with 15 m resolution were used to produce DEM on an area with low and near Mean Sea Level (MSL) elevation in Johor Malaysia. Despite the satisfactory pre-processing results the visual assessment of the DEM generated from Toutin’s model showed that the DEM contained many outliers and incorrect values. The failure of Toutin’s model may mostly be due to the inaccuracy and insufficiency of ASTER ephemeris data for low terrains as well as huge water body in the stereo images.

Improving criteria and feedback in student assessment in law

Spurred on by both the 1987 Pearce Report1 and the general changes to higher education spawned by the “Dawkins revolution” from 1988, there has been much critical self-evaluation leading to profound improvements to the quality of teaching in Australian law schools.2 Despite the changes there are still areas of general law teaching practice which have lagged behind recent developments in our understanding of what constitutes high quality teaching. One such area is assessment criteria and feedback. The project Improving Feedback in Student Assessment in Law is an attempt to remedy this. It aims to produce a manual containing key principles for the design of assessment and the provision of feedback, with practical yet flexible ideas and illustrations which law teachers may adopt or modify. Most of the examples have been developed by teachers at the University of Melbourne Law School. The project was supported in 1996 by a Committee for the Advancement of University Teaching grant and the manual will be published late in 1997.3 This note summarises the core principles which are elaborated further in the manual.

Assessment of robust autonomy for unmanned systems : progress and challenges

The growing number of potential applications of Unmanned Aircraft Systems (UAS) in civilian operations and national security is putting pressure of National Airworthiness Authorities to provide a path for certification and allow UAS integration into the national airspace. The success of this integration depends not only on developments in improved UAS reliability and safety, but also on regulations for certification, and methodologies for operational performance and safety assessment. This paper focuses on the latter and describes progress in relation to a previously proposed framework for evaluating robust autonomy of UAS. The paper draws parallels between the proposed evaluation framework and the evaluation of pilots during the licensing process. It discusses how the data from the proposed evaluation can be used as an aid for decision making in certification and UAS designs. Finally, it discusses challenges associated with the evaluation.

Predicting the likelihood of non-healing : a venous leg ulcer risk assessment tool

This project developed, validated and tested reliability of a risk assessment tool to predict the risk of failure to heal of patients with venous leg ulcers within 24 weeks. The risk assessment tool will allow clinicians to be able to determine realistic outcomes for their patients, promote early healing and potentially avoid weeks of inappropriate therapy. The tool will also assist in addressing specific risk factors and guide decisions on early, alternative, tailored interventions.

Integrating ‘role play’ in assessment to strengthen professional conduct and accountability of students : a pilot study

BACKGROUND In a process engineering setting, graduates are frequently allocated reviews of existing operations or required to scope new production processes by their supervisors with a view to improving or expanding on operations and overall productivity. These tasks may be carried out in teams and in consultation with the process engineer’s immediate line manager or a more experienced engineer, such as the Production or Maintenance Manager; ultimately reporting to senior management, which is frequently a non-engineer. Although professional skills development is part of engineering curricula, ‘professional conduct’ and ‘accountability’ required for dealing with peers and superiors in industry is not very well addressed at university. Consequently, upon graduation, many students are, in terms of knowledge and experience in this area, underprepared to work effectively in industry settings. PURPOSE The purpose of this study was to develop and implement a role-play scenario within a core 2nd year process engineering unit, so that students could gain knowledge, skills and experience in different aspects (and nuances) of professional conduct and accountability. DESIGN/METHOD In the role-play scenario, students worked in ‘engineering production teams’ to design a process for an iconic Queensland fruitcake and to present their solution and recommendations (culminating in a poster presentation) to an assessment panel consisting of staff, role-playing as, ‘production and plant managers’. Students were assessed on several areas, including professionalism using a criteria referenced assessment guide by a 3-member cross-disciplinary staff panel consisting of a Business Faculty lecturer, an engineer from industry and the lecturer of the Process Engineering unit. Professional conduct and accountability was gauged through direct questioning by the panel. Feedback was also sought from students on various aspects through a survey questionnaire after the role play activity at the end of semester. RESULTS Overall, the role play was very well performed with students achieving an average score of 79.3/100 (distinction grade). Professional conduct as assessed by panel was on average better than scores given for professional accountability (4.0 compared with 3.6 out of 5). Feedback from students indicated that the learning activities had contributed to their overall understanding of the content and the role of process engineers. Industry involvement was rated very highly as contributing to their learning at 4.8 (on Likert scale from 1 – 5) and the poster presentation was rated at 3.6. CONCLUSIONS This pilot study was successful in implementing a new assessment task for modelling professional conduct and accountability within a 2nd year core unit. This task incorporated a role-play activity and there was evidence to suggest that this and associated learning tasks were successful in broadening students’ understanding and skills in this area required for engineering practice. Following feedback given by students and staff, improvements will be made to the nature of the problem, how it is defined, its assessment, and the approach taken in the role-play scenario when the unit is offered in 2014.