River basin surveillance using remotely sensed data: a water resources information management system

This thesis describes the development of an operational river basin water resources information management system. The river or drainage basin is the fundamental unit of the system; in both the modelling and prediction of hydrological processes, and in the monitoring of the effect of catchment management policies. A primary concern of the study is the collection of sufficient and sufficiently accurate information to model hydrological processes. Remote sensing, in combination with conventional point source measurement, can be a valuable source of information, but is often overlooked by hydrologists, due to the cost of acquisition and processing. This thesis describes a number of cost effective methods of acquiring remotely sensed imagery, from airborne video survey to real time ingestion of meteorological satellite data. Inexpensive micro-computer systems and peripherals are used throughout to process and manipulate the data. Spatial information systems provide a means of integrating these data with topographic and thematic cartographic data, and historical records. For the system to have any real potential the data must be stored in a readily accessible format and be easily manipulated within the database. The design of efficient man-machine interfaces and the use of software enginering methodologies are therefore included in this thesis as a major part of the design of the system. The use of low cost technologies, from micro-computers to video cameras, enables the introduction of water resources information management systems into developing countries where the potential benefits are greatest.

Electronics:a case study of economic value added in target costing

Whilst target costing and strategic management accounting (SMA) continue to be of considerable interest to academic accountants, both suffer from a relative dearth of empirically based research. Simultaneously, the subject of economic value added (EVA) has also been the subject of little research at the level of the individual firm.The aim of this paper is to contribute to both the management accounting and value based management literatures by analysing how one major European based MNC introduced EVA into its target costing system. The case raises important questions about both the feasibility of cascading EVA down to product level and the compatibility of customer facing versus shareholder focused systems of performance management. We provide preliminary evidence that target costing can be used to align both of these perspectives, and when combined with other SMA techniques it can serve as " the bridge connecting strategy formulation with strategy execution and profit generation" ( Ansari et al., 2007, p. 512). © 2012 Elsevier Ltd.

Semantic annotation for knowledge management:requirements and a survey of the state of the art

While much of a company's knowledge can be found in text repositories, current content management systems have limited capabilities for structuring and interpreting documents. In the emerging Semantic Web, search, interpretation and aggregation can be addressed by ontology-based semantic mark-up. In this paper, we examine semantic annotation, identify a number of requirements, and review the current generation of semantic annotation systems. This analysis shows that, while there is still some way to go before semantic annotation tools will be able to address fully all the knowledge management needs, research in the area is active and making good progress.

Ontologies for crisis management:a review of state of the art in ontology design and usability

The growing use of a variety of information systems in crisis management both by non-governmental organizations (NGOs) and emergency management agencies makes the challenges of information sharing and interoperability increasingly important. The use of semantic web technologies is a growing area and is a technology stack specifically suited to these challenges. This paper presents a review of ontologies, vocabularies and taxonomies that are useful in crisis management systems. We identify the different subject areas relevant to crisis management based on a review of the literature. The different ontologies and vocabularies available are analysed in terms of their coverage, design and usability. We also consider the use cases for which they were designed and the degree to which they follow a variety of standards. While providing comprehensive ontologies for the crisis domain is not feasible or desirable there is considerable scope to develop ontologies for the subject areas not currently covered and for the purposes of interoperability.

Integrated approach to materials management:a case study

The materials management function is always a major concern to management of any industrial organization, since high inventory and an inefficient procurement process significantly affect profitability. Problems multiply due to the current dynamic business environment in many countries. Hence, existing materials planning and procurement process and inventory management systems require a review. This article shows a radical improvement in the materials management function for an Indian petroleum refinery through business process re-engineering (BPR) by analyzing the current process, identifying key issues, deriving paradigm shifts and developing re-engineered processes through customer value analysis. BPR has been carried out on the existing processes of "material planning and procurement" and "warehousing and surplus disposal.

"Customer" knowledge management in healthcare

This paper reports on a work-in-progress project on the management of patient knowledge in a UK general hospital. Greater involvement of patients is generally seen as crucial to the effective provision of healthcare in the future. However, this presents many challenges, especially in the light of the ageing population in most developed countries and the consequent increasing demand for healthcare. In the UK, there have been many attempts to increase patient involvement by the systematisation of patient feedback, but typically they have not been open to academic scrutiny or formal evaluation, nor have they used any knowledge management principles. The theoretical foundations for this project come first from service management and thence from customer knowledge management. Service management stresses the importance of the customer perspective. Healthcare clearly meets the definitions of a service even though it may also include some tangible elements such as surgery and provision of medication. Although regarding hospital patients purely as "customers" is a viewpoint that needs to be used with care, application of the theory offers potential benefits in healthcare. The two main elements we propose to use from the theory are the type of customer knowledge and its relationship to attributes of the quality of the service provided. The project is concerned with investigating various knowledge management systems (KMS) that are currently in use (or proposed) to systematise patient feedback in an NHS Trust hospital, to manage knowledge from and to a lesser extent about patients. The study is a mixed methods (quantitative and qualitative) action research investigation intended to answer the following three research questions: • How can a KMS be used as a mechanism to capture and evaluate patient experiences to provoke patient service change • How can the KMS assist in providing a mechanism for systematising patient engagement? • How can patient feedback be used to stimulate improvements in care, quality and safety?

The Role of DBMS in Analytical Processes of the Logistic of Stock Reserves

One of main problems of corporate information systems is the precise evaluation of speed of transactions and the speed of making reports. The core of the problem is based on the DBMS that is used. Most DBMS which are oriented for high performance and reliability of transactions do not give fast access to analytical and summarized data and vice versa. It is quite difficult to estimate which class of database to use. The author of the article gives a concise observation of the problem and a possible way to be solved.

Linking design and manufacturing domains via web-based and enterprise integration technologies

The manufacturing industry faces many challenges such as reducing time-to-market and cutting costs. In order to meet these increasing demands, effective methods are need to support the early product development stages by bridging the gap of communicating early design ideas and the evaluation of manufacturing performance. This paper introduces methods of linking design and manufacturing domains using disparate technologies. The combined technologies include knowledge management supporting for product lifecycle management systems, Enterprise Resource Planning (ERP) systems, aggregate process planning systems, workflow management and data exchange formats. A case study has been used to demonstrate the use of these technologies, illustrated by adding manufacturing knowledge to generate alternative early process plan which are in turn used by an ERP system to obtain and optimise a rough-cut capacity plan. Copyright © 2010 Inderscience Enterprises Ltd.

Semantic representation for comparison of performance measurement indicators

Indicators are widely used by organizations as a way of evaluating, measuring and classifying organizational performance. As part of performance evaluation systems, indicators are often shared or compared across internal sectors or with other organizations. However, indicators can be vague and imprecise, and also can lack semantics, making comparisons with other indicators difficult. Thus, this paper presents a knowledge model based on an ontology that may be used to represent indicators semantically and generically, dealing with the imprecision and vagueness, and thus facilitating better comparison. Semantic technologies are shown to be suitable for this solution, so that it could be able to represent complex data involved in indicators comparison.

Assessing the impact of management concerns in e-business requirements planning in manufacturing organizations

This paper describes the application of a model, initially developed for determining the e-business requirements of a manufacturing organization, to assess the impact of management concerns on the functions generated. The model has been tested on 13 case studies in small, medium and large organizations. This research shows that the incorporation of concerns for generating the requirements for e-business functions improves the results, because they expose issues that are of relevance to the decision making process relating to e-business. Running the model with both and without concerns, and then presenting the reasons for major variances, can expose the issues and enable them to be studied in detail at the individual function/ reason level. © IFIP International Federation for Information Processing 2013.

Ontology for performance measurement indicators’ comparison

Indicators are widely used by organizations as a way of evaluating, measuring and classifying organizational performance. As part of performance evaluation systems, indicators are often shared or compared across internal sectors or with other organizations. However, indicators can be vague and imprecise, and also can lack semantics, making comparisons with other indicators difficult. Thus, this paper presents a knowledge model based on an ontology that may be used to represent indicators semantically and generically, dealing with the imprecision and vagueness, and thus facilitating better comparison. Semantic technologies are shown to be suitable for this solution, so that it could be able to represent complex data involved in indicators comparison.

Implementing a knowledge management system within an NHS hospital:a case study exploring the roll-out of an Electronic Patient Record (EPR)

This research aims to contribute to understanding the implementation of knowledge management systems (KMS) in the field of health through a case study, leading to theory building and theory extension. We use the concept of the business process approach to knowledge management as a theoretical lens to analyse and explore how a large teaching hospital developed, executed and practically implemented a KMS. A qualitative study was conducted over a 2.5 year period with data collected from semi-structured interviews with eight members of the strategic management team, 12 clinical users and 20 patients in addition to non-participant observation of meetings and documents. The theoretical propositions strategy was used as the overarching approach for data analysis. Our case study provides evidence that true patient centred approaches to supporting care delivery with a KMS benefit from process thinking at both the planning and implementation stages, and an emphasis on the knowledge demands resulting from: the activities along the care pathways; where cross-overs in care occur; and knowledge sharing for the integration of care. The findings also suggest that despite the theoretical awareness of KMS implementation methodologies, the actual execution of such systems requires practice and learning. Flexible, fluid approaches through rehearsal are important and communications strategies should focus heavily on transparency incorporating both structured and unstructured communication methods.

Incorporating Water Sensitive Urban Design (WSUD) practices into the planning context:the conceptual case for lot-scale developments

In recent decades, a number of sustainable strategies and polices have been created to protect and preserve our water environments from the impacts of growing communities. The Australian approach, Water Sensitive Urban Design (WSUD), defined as the integration of urban planning and design with the urban water cycle management, has made considerable advances on design guidelines since 2000. WSUD stormwater management systems (e.g. wetlands, bioretentions, porous pavement etc), also known as Best Management Practices (BMPs) or Low Impact Development (LID), are slowly gaining popularity across Australia, the USA and Europe. There have also been significant improvements in how to model the performance of the WSUD technologies (e.g. MUSIC software). However, the implementation issues of these WSUD practices are mainly related to ongoing institutional capacity. Some of the key problems are associated with a limited awareness of urban planners and designers; in general, they have very little knowledge of these systems and their benefits to the urban environments. At the same time, hydrological engineers should have a better understanding of building codes and master plans. The land use regulations are equally as important as the physical site conditions for determining opportunities and constraints for implementing WSUD techniques. There is a need for procedures that can make a better linkage between urban planners and WSUD engineering practices. Thus, this paper aims to present the development of a general framework for incorporating WSUD technologies into the site planning process. The study was applied to lot-scale in the Melbourne region, Australia. Results show the potential space available for fitting WSUD elements, according to building requirements and different types of housing densities. © 2011 WIT Press.

Innovativeness of Indian firms - catalysts and deterrents

Innovation is the driving force that is crucial for firms to sustain their competitive advantage and for economies and industries in general to surge forward. In comparison to developing economies, developed economies have always maintained greater focus on national innovation systems while the firms from these economies have been investing considerable effort on promoting organisational innovation. As firms became increasingly global, consumers across the world, especially from the emerging economies, are getting a taste of more sophisticated products and services. There was also an infusion of knowledge pertaining to cutting-edge technologies, innovation, processes and management systems into this part of the world. However, studies on organisational innovation have largely been confined to firms from developed economies in order to understand the effects of its determinants (Anderson et al., 2004; Choi and Williams, 2014; Li et al., 2013). Given the differences in the socio-cultural milieu between the developed and emerging economies, more nuanced understanding of the factors affecting and the processes associated with innovation in emerging markets is required.

Teljesítménymérés és döntéstámogatás az üzleti szférában = Performance measurement and decision support in business practice

Tanulmányunkban a hazai vállalatok teljesítménymérési és teljesítménymenedzsment gyakorlatát vizsgáljuk a Versenyben a világgal kutatási program adatainak felhasználásával. Célunk a döntéstámogatás hátterének vizsgálata: a vállalatok teljesítménymérési gyakorlatának jellemzése, konzisztenciájának értékelése, vizsgálva a korábbi kutatásaink során megfigyelt tendenciák további alakulását is. A vállalatvezetők által fontosnak/hasznosnak tartott, illetve rendszeresen használt információforrásokat, teljesítménymutatókat, elemzési eszközöket a korábbi kutatásainkhoz kialakított elemzési keret (orientáció, egyensúly, konzisztencia, támogató szerep) felhasználásával értékeltük. Az információs rendszer különböző tevékenységeket támogató szerepének az értékelése során a különböző területekért felelős vezetők véleményét is összevetettük, s különböző vállalatcsoportok sajátosságait is vizsgáltuk. --------- The paper analyses the performance measurement and performance management practice of Hungarian companies, based on data of the Competitiveness research program. Our goal was to evaluate the practice from the point of view of decision support, based on our previous framework, evaluating the orientation, the balance, the consistency and the supporting role of the performance measurement practice.