Structural and electrical properties of LaNiO3 thin films grown on (100) and (001) oriented SrLaAlO4 substrates by chemical solution deposition method

LaNiO3 thin films were deposited on SrLaAlO4 (1 0 0) and SrLaAlO4 (0 0 1) single crystal substrates by a chemical solution deposition method and heat-treated in oxygen atmosphere at 700° C in tube oven. Structural, morphological, and electrical properties of the LaNiO 3 thin films were characterized by X-ray diffraction (XRD), atomic force microscopy (AFM), field emission scanning electron microscopy (FE-SEM), and electrical resistivity as temperature function (Hall measurements). The X-ray diffraction data indicated good crystallinity and a structural preferential orientation. The LaNiO3 thin films have a very flat surface and no droplet was found on their surfaces. Samples of LaNiO3 grown onto (1 0 0) and (0 0 1) oriented SrLaAlO4 single crystal substrates reveled average grain size by AFM approximately 15-30 nm and 20-35 nm, respectively. Transport characteristics observed were clearly dependent upon the substrate orientation which exhibited a metal-to-insulator transition. The underlying mechanism is a result of competition between the mobility edge and the Fermi energy through the occupation of electron states which in turn is controlled by the disorder level induced by different growth surfaces. © 2013 Elsevier Ltd and Techna Group S.r.l.

Cross-talk with β2-adrenoceptors enhances ligand affinity properties from endothelial alpha1D-adrenoceptors that mediates carotid relaxation

Objectives Our main objectives were to investigate the affinity properties of endothelial and muscular α1D-adrenoceptors and to characterize the cross-talk between endothelial α1D- adrenoceptors and β2-adrenoceptors in rat carotid. Methods Relaxation and contraction concentration-response curves for phenylephrine (α1-adrenergic agonist) were obtained in carotid rings in absence or presence of increasing concentrations of BMY7378 (α 1D-adrenergic antagonist), combined or not with increasing concentration of ICI-118,551 (β2-adrenergic antagonist). Schild analysis was used to estimate the affinity constant from pA2 values of BMY7378. Key Findings BMY7378 produced an unsurmountable antagonism on phenylephrine-induced relaxation but a surmountable antagonism on phenylephrine-induced contraction. BMY7378 potency was higher in inhibiting the relaxation than the contraction induced by phenylephrine because the rightward shifts induced by BMY7378 were greater in the relaxation. The apparent pA 2 value for BMY7378 in phenylephrine-induced relaxation was greater than in contraction. When combined with ICI-118,551, BMY7378 yielded a surmountable antagonism on phenylephrine-induced relaxation and presented a pA2 value similar to that obtained in phenylephrine-induced contraction. Conclusions Endothelial α1D-adrenoceptors, which mediates rat carotid relaxation, present high ligand affinity because of the cross-talk with β2-adrenoceptors, which explains the higher potency of phenylephrine in inducing relaxation than contraction and the atypical unsurmountable antagonism produced by BMY7378 on phenylephrine-induced relaxation. © 2013 Royal Pharmaceutical Society.

Ferroelectric and structural instability of (Pb,Ca)TiO3 thin films prepared in an oxygen atmosphere and deposited on LSCO thin films which act as a buffer layer

Structural, microstructural and ferroelectric properties of Pb0.90Ca0.10TiO3 (PCT10) thin films deposited using La0.50Sr0.50CoO3 (LSCO) thin films which serve only as a buffer layer were compared with properties of the thin films grown using a platinum-coated silicon substrate. LSCO and PCT10 thin films were grown using the chemical solution deposition method and heat-treated in an oxygen atmosphere at 700 °C and 650 °C in a tube oven, respectively. X-ray diffraction (XRD) and Raman spectroscopy results showed that PCT10 thin films deposited directly on a platinum-coated silicon substrate exhibit a strong tetragonal character while thin films with the LSCO buffer layer displayed a smaller tetragonal character. Surface morphology observations by atomic force microscopy (AFM) revealed that PCT10 thin films with a LSCO buffer layer had a smoother surface and smaller grain size compared with thin films grown on a platinum-coated silicon substrate. Additionally, the capacitance versus voltage curves and hysteresis loop measurement indicated that the degree of polarization decreased for PCT10 thin films on a LSCO buffer layer compared with PCT10 thin films deposited directly on a platinum-coated silicon substrate. This phenomenon can be described as the smaller shift off-center of Ti atoms along the c-direction 〈001〉 inside the TiO6 octahedron unit due to the reduction of lattice parameters. Remnant polarization (P r ) values are about 30 μC/cm2 and 12 μC/cm2 for PCT10/Pt and PCT10/LSCO thin films, respectively. Results showed that the LSCO buffer layer strongly influenced the structural, microstructural and ferroelectric properties of PCT10 thin films. © 2013 Elsevier Ltd and Techna Group S.r.l.

Estrutura eletrônica de derivados de Poli(3-Hexiltiofeno) para aplicações em camadas ativas de células solares orgânicas

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Effect of coastline properties and wastewater on plankton composition and distribution in a stressed environment on the north coast of Olinda-PE (Brazil)

Foi realizado um estudo sobre a estrutura das comunidades planctônicas ao longo das praias de Casa Caiada e Rio Doce (Pernanbuco, Brasil). A área de estudo sofre grande influência antrópica onde as condições ambientais são controladas pela presença de estruturas costeiras, reduzindo a intensidade da circulação neste ambiente; e pelos efluentes clandestinos de esgoto que aportam águas poluídas para dentro do sistema protegido. Os resultados obtidos indicam que nas zonas protegidas as águas apresentam alta turbidez, temperaturas elevadas, salinidades reduzidas e altas concentrações de nutrientes e oxigênio. Estas condições são responsáveis pela redução da diversidade do plâncton e pelo aumento da biomassa das espécies mais resistentes. As diferenças registradas com respeito a áreas similares, porém não impactadas, parecem indicar que a estrutura planctônica pode ser usada como um indicador da qualidade ambiental, sugerindo uma baixa qualidade das praias em estudo.

Interstitial oxygen's influence on the corrosion behavior of Ti-9Mo alloys

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

First-Principles Study of Pressure-Induced Phase Transitions and Electronic Properties of Ag2MoO4

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Structural, electronic and optical properties of Fe(III) complex with pyridine-2,6-dicarboxylic acid: A combined experimental and theoretical study

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

DFT Study on Ce-Doped Anatase TiO2: Nature of Ce3+ and Ti3+ Centers Triggered by Oxygen Vacancy Formation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The Influence of Small Quantities of Oxygen in the Structure, Microstructure, Hardness, Elasticity Modulus and Cytocompatibility of Ti-Zr Alloys for Dental Applications

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

In Vitro Cytotoxicity of a Ti-35Nb-7Zr-5Ta Alloy Doped with Different Oxygen Contents

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Vitamin D Induces Increased Systolic Arterial Pressure via Vascular Reactivity and Mechanical Properties

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ethyl Ferulate, a Component with Anti-Inflammatory Properties for Emulsion-Based Creams

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

An investigation into the influence of zinc precursor on the microstructural, photoluminescence, and gas-sensing properties of ZnO nanoparticles

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Structural, thermal and optical properties of CaBO and CaLiBO glasses doped with Eu3+

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)