Note: Design and development of an integrated three-dimensional scanner for atomic force microscopy

A compact scanning head for the Atomic Force Microscope (AFM) greatly enhances the portability of AFM and facilitates easy integration with other tools. This paper reports the design and development of a three-dimensional (3D) scanner integrated into an AFM micro-probe. The scanner is realized by means of a novel design for the AFM probe along with a magnetic actuation system. The integrated scanner, the actuation system, and their associated mechanical mounts are fabricated and evaluated. The experimentally calibrated actuation ranges are shown to be over 1 mu m along all the three axes. (c) 2013 AIP Publishing LLC.

Design and Development of Thermoelectric Generator

In this paper we discuss the fabrication, working and characteristics of a thermoelectric generator made up of p and n type semiconductor materials. The device consists of Fe0.2Co3.8Sb11.5Te0.5 (zT = 1.04 at 818 K) as the n-type and Zn4Sb3 (zT= 0.8 at 550 K) as the p-type material synthesized by vacuum hot press method. Carbon paste has been used to join the semiconductor legs to metal (Molybdenum) electrodes to reduce the contact resistance. The multi-couple (4 legs) generator results a maximum output power of 1.083 mW at a temperature difference of 240 K between the hot and cold sides. In this investigation, an I-V characteristic, maximum output power of the thermoelectric module is presented. The efficiency of thermoelectric module is obtained as eta= 0.273 %.

Formation, microstructure and development of the localized shear deformation in low-carbon steels

An investigation has been made into the effect of microstructural parameters on the propensity for forming shear localization produced during high speed torsional testing by split Hopkinson bar with different average rates of 610, 650 and 1500 s(-1) in low carbon steels. These steels received the quenched, quenched and tempered as well as normalized treatments that provide wide microstructural parameters and mechanical properties. The results indicate that the occurrence of the shear localization is susceptible to the strength of the steels. In other words, the tendency of the quenched steel to form a shear band is higher than that of the other two steels. It is also found that there is a critical strain at which the shear localization occurs in the steels. The critical strain value is strongly dependent on the strength of the steels. Before arriving at this point, the material undergoes a slow work-hardening. After this point, the material suffers work-softening, corresponding to a process during which the deformation is gradually localized and eventually becomes spatially correlated to form a macroscopic shear band. Examinations by SEM reveal that the shear localization within the band involves a series of sequential crystallographic and non-crystallographic events including the change in crystal orientation, misorientation, generation and even perhaps damage in microstructures such as the initiation, growth and coalescence of the microcracks. It is expected that the sharp drop in the load-carrying capacity is associated with the growth and coalescence of the microcracks rather than the occurrence of the shear localization, but the shear localization is seen to accelerate the growth and coalescence of the microcracks. The thin foil observations by TEM reveal that the density of dislocations in the band is extremely high and the tangled arrangement and cell structure of dislocations tends to align along the shear direction. The multiplication and interaction of dislocations seems to be responsible for work-hardening of the steels. The avalanche of the dislocation cells corresponds to the sharp drop in shear stress at which the deformed specimen is broken. Double shear bands and kink bands are also observed in the present study. The principal band develops first and its width is narrower than that of the secondary band.

Catch-22: conservation, communities and the privatization of B.C. fisheries. An economic, social and ecological impact study

pdf contains 47 pages

Warrington Collegiate: LRC pop-up training area to enhance staff training and development

Warrington Collegiate wanted to locate an area of the Learning Resource Centre (LRC) and equip it with a smart board and ten laptops primarily for staff development. Since the pop-up seminar area has been created it has been used for Vado, Moodle, Quizdom and e-book training plus much more. From an empty corner in the LRC the addition of this technology has created a welcoming comfortable learning space. It has encouraged staff across all the curriculum areas to come into the LRC and extended their role in a place for high quality staff development.

Review of selected organisational IDs and development of use cases for the Jisc CASRAI-UK Organisational Identifiers Working Group

This project aimed to investigate and review candidates for providing an authoritative, widely used unique identifier for organisations involved in research in the UK. Specifically, we undertook to: ● clarify a representative but not comprehensive set of use cases for the UK research community to use organisational identifiers (orgIDs); ● survey and interview a small number of well-informed people in the field in order to create and prioritise a list of desirable features for the provision of orgIDs and potential services built around them; ● check the use cases and these required features against four possible candidate orgIDs and their providers; ● inform the Working Group of our conclusions and, if appropriate, make recommendations for adoption by the UK research community.

Livelihood analysis and development of a planning support for the poor in aquaculture and aquatic resource management. Workshop proceedings. 13-15 February 2001, Thai Nguyen, Vietnam

The workshop was organized to understand and describe the livelihoods of poor people who manage aquatic resources for planning support. The purpose was to support field workers to carry out livelihood analysis and how to use this information. (PDF contains 13 pages)

Improving coastal livelihoods through sustainable aquaculture practices – the case of Tubigon, Bohol, Philippines: a report to the collaborative APEC Grouper Research and Development Network

This case study is part of STREAM’s four-country research project, which is exploring how recent advances in sustainable aquaculture have helped and can help improve coastal livelihoods and prevent unsustainable fishing practices in reef fisheries. (Pdf contains 65 pages).