Uso de un sistema para la gestión del aprendizaje (LMS) de código libre en la Universidad Tecnológica del Suroeste de Guanajuato (UTSOE)

The use of the Information and Communication Technologies (ICT) in Learning Environment allows achieving the maximum interaction between Teachers and Students.The Virtual Learning Environments are computer programs that benefit the learning facilitating the communication between users. Open Source software allow to create the own online modular learning environment with a fast placed in service. In the present paper the use of a Learning Management Systems (LMS) as continuous education tool is proposed.

Monitorización de sistemas en alta disponibilidad

El objetivo del proyecto es implantar un sistema de monitorización, con la peculiaridad de encontrarse en alta disponibilidad, esto es, que el servicio (la monitorización de una infraestructura) se preste forma continua y no se vea interrumpido. Dado que el propósito del sistema es monitorizar activamente una infraestructura, ha sido necesario desplegar una infraestructura, además del sistema de monitorización. La infraestructura en cuestión está compuesta por un servidor de documentación, un servidor de base de datos, un servidor de aplicaciones y un servidor web. El sistema de monitorización se ha desplegado en la misma red de área local de esta infraestructura y monitoriza que los servicios prestados por los componentes de esta infraestructura se encuentren operativos y funcionando adecuadamente. Así pues, se tendría un sistema de monitorización local funcional. No obstante, el proyecto plantea un sistema escalable, que esté preparado para el crecimiento de la infraestructura y continúe siendo eficiente. Para ello, sistema de monitorización se encuentre dividido por dos componentes:  Sonda delegada: monitoriza localmente los activos de la infraestructura a monitorizar, es el escenario anteriormente descrito.  Sonda maestra: recibe los resultados de la monitorización realizada, este sistema puede estar desplegado en otra red distinta a la sonda delegada. Este enfoque no solo es escalable, sino también es fiel a la realidad, pues puede darse el caso de que las sondas pertenezcan a distintas infraestructuras e inclusive, distintas organizaciones, y se comuniquen a través de internet, mediante un mecanismo confiable a ser posible. El proyecto plantea que ambas sondas se encuentren en alta disponibilidad (en adelante HA, referente a high availability), y que cada sonda está compuesta por dos equipos (nodos, en adelante). Como se analizará en posteriores capítulos, existen diversas configuraciones que permiten implantar un sistema en HA, la configuración escogida para el proyecto es Activo – Pasivo(los detalles de esta configuración también se explican en posteriores capítulos). Para finalizar, se estudiara la posibilidad de ofrecer respuestas activas en ciertas situaciones y configuraciones adicionales sobre el sistema de monitorización base. Por otro lado, para la implantación del proyecto se ha usado software de código abierto para la virtualización de la infraestructura (Virtual Box y GNS3), los sistemas operativos base (Linux), el sistema de monitorización(Nagios Core) así como el software que implementa la HA (corosync y pacemaker).---ABSTRACT---The aim of the Project is to implement a monitoring system, with the peculiarity of being deployed in high availability, what it is that the service (monitoring infrastructure) is provided continuously and not interrupted. As the purpose of the system is monitoring infrastructure actively, an infrastructure has been deployed, and also the monitoring system. The infrastructure monitored is composed of a documentation server, a server database, an application server and a Web server. The monitoring system has been also deployed on the same LAN of this infrastructure and monitors the services provided by the components of this infrastructure are operational and working as expected. This is a local monitoring system functional. However, the project also proposes a scalable system that is ready for growth of infrastructure and efficient. This is the reason of divide the system in two components:  Slave Component: monitors locally the infrastructure assets to be monitored, this is the scenario described above.  Master Component: get the results from the monitoring, provided by the Slave Component. This system can be deployed in a different network than the slave component. This approach is not only scalable but also a real scenario, as may be the case that the Components belongs to different infrastructures and even, different organizations, also this components can communicate over the Internet, through a reliable mechanism if possible. The project proposes that both Components are deployed in high availability (HA onwards concerning high availability), each Component is composed of two servers (nodes, hereafter). As will be discussed in later chapters, there are several settings available to deploy a system in HA, the configuration chosen for the project is Active - Passive (details of this configuration are also explained in later chapters). Finally the possibility of offering active responses in certain situations and additional settings on the monitoring system will be discussed. On the other hand, for the implementation of the project, open source software has been used, for virtualization infrastructure (Virtual Box and GNS3), code-based operating systems (Linux), the monitoring system (Nagios core), as well as the software that implements the HA (corosync and pacemaker).

Análisis, diseño e implementación de un SDK híbrido basado en tecnologías web para la integración de clientes contra una plataforma de servicios RESTFul/JSON

En el departamento de Ocio Digital de bq se desarrollan multitud de proyectos con diferentes modelos de negocio y diferentes stack tecnológicos. Para llevar a cabo todos estos proyectos, es necesario tener un ecosistema de desarrollo lo más unificado y centralizado posible. Por eso, en el departamento existe una plataforma genérica de servicios REST sobre la que se apoyan todos los aplicativos desarrollados. Para agilizar y facilitar la integración de los aplicativos con la plataforma de servicios,se desarrolla este SDK (Software Development Kit) basado en JavaScript llamado corbel-js. Este SDK ha de funcionar tanto en aplicaciones web, como en un middleware basado en node.js desarrollado también en la organización, por lo que el SDK se ha desarrollado de forma híbrida, siendo capaz de ejecutarse tanto en en el lado del cliente, como en el lado del servidor. Además, como parte de la filosofía del departamento, el desarrollo del SDK está basado en tecnologías Open Source, usando metodologías ágiles de desarrollo y un sistema de integración continua y revisión de código, garantizando la calidad del mismo. ABSTRACT A lot of different kinds of software projects are developed in the digital department of bq. To easily develop all of these projects, each one with its own business model and technology stack, it is necessary to have an unique software ecosystem. Because of that, in the software department a generic service REST platform has been developed. To support an easy integration of the applications with the service platform of the organization, this SDK(Software Development Kit) has been developed in JavaScript. As the SDK has to run under a web application and under a software middleware based in node.js, also developed in the organization, the SDK is hybrid, being capable of run inside a web client application or inside a node.js application server. As a part of the software philosophy of the department, the development of the SDK is made with a whole open source software stack, using agile software methodologies.

Implementación de plug-ins para REAPER: módulo de reverberación convolutiva en tiempo real y sistema para la medición de respuestas acústicas en salas

Existen en el mercado numerosas aplicaciones para la generación de reverberación y para la medición de respuestas al impulso acústicas. Sin embargo, éstas son de precios muy elevados y/o no se permite acceder a su código y, mucho menos, distribuir de forma totalmente libre. Además, las herramientas que ofrecen para la medición de respuestas al impulso requieren de un tedioso proceso para la generación de la señal de excitación, su reproducción y grabación y, finalmente, su post-procesado. Este procedimiento puede llevar en ocasiones al usuario a cometer errores debido a la falta de conocimientos técnicos. El propósito de este proyecto es dar solución a algunos de los inconvenientes planteados. Con tal fin se llevó a cabo el desarrollo e implementación de un módulo de reverberación por convolución particionada en tiempo real, haciendo uso de software gratuito y de libre distribución. En concreto, se eligió la estación digital de trabajo (DAW. Digital Audio Worksation) REAPER de la compañía Cockos. Además de incluir las funcionalidades básicas de edición y secuenciación presentes en cualquier DAW, el programa incluye un entorno para la implementación de efectos de audio en lenguaje JS (Jesusonic), y se distribuye con licencias completamente gratuitas y sin limitaciones de uso. Complementariamente, se propone una extensión para REAPER que permite la medición de respuestas al impulso de recintos acústicos de una forma completamente automatizada y amigable para el usuario. Estas respuestas podrán ser almacenadas y posteriormente cargadas en el módulo de reverberación, permitiendo aplicar sobre nuestras pistas de audio la respuesta acústica de cualquier recinto en el que se hayan realizado medidas. La implementación del sistema de medida de respuestas se llevó a cabo empleando la herramienta ReaScript de REAPER, que permite la ejecución de pequeños scripts Python. El programa genera un Barrido Sinusoidal Logarítmico que excita el recinto acústico cuya respuesta se desea medir, grabando la misma en un archivo .wav. Este procedimiento es sencillo, intuitivo y está al alcance de cualquier usuario doméstico, ya que no requiere la utilización de sofisticado instrumental de medida. ABSTRACT. There are numerous applications in the market for the generation of reverb and measurement of acoustic impulse responses. However, they are usually very costly and closed source. In addition, the provided tools for measuring impulse responses require tedious processes for the generation and reproduction of the excitation signal, the recording of the response and its final post-processing. This procedure can sometimes drive the user to make mistakes due to the lack of technical knowledge. The purpose of this project is to solve some of the mentioned problems. To that end we developed and implemented a real-time partitioned convolution reverb module using free open source software. Specifically, the chosen software was the Cockos’ digital audio workstation (DAW) REAPER. In addition to the basic features included in any DAW, such as editing and sequencing, the program includes an environment for implementing audio effects in JS (Jesusonic) language of free distribution and features an unrestricted license. As an extension for REAPER, we propose a fully automated and user-friendly method for measuring rooms’ acoustic impulse responses. These will be stored and then loaded into the reverb module, allowing the user to apply the acoustical response of any room where measurement have been taken to any audio track. The implementation of the impulse response measurement system was done using REAPER’s ReaScript tool that allows the execution of small Python scripts. The program generates a logarithmic sine sweep that excites the room and its response is recorded in a .wav file. This procedure is simple, intuitive and it is accessible to any home user as it does not require the use of sophisticated measuring equipment.

A methodology for evacuation route planning inside buildings using geospatial technology

Evacuation route planning is a fundamental task for building engineering projects. Safety regulations are established so that all occupants are driven on time out of a building to a secure place when faced with an emergency situation. As an example, Spanish building code requires the planning of evacuation routes on large and, usually, public buildings. Engineers often plan these routes on single building projects, repeatedly assigning clusters of rooms to each emergency exit in a trial-and-error process. But problems may arise for a building complex where distribution and use changes make visual analysis cumbersome and sometimes unfeasible. This problem could be solved by using well-known spatial analysis techniques, implemented as a specialized software able to partially emulate engineer reasoning. In this paper we propose and test an easily reproducible methodology that makes use of free and open source software components for solving a case study. We ran a complete test on a building floor at the University of Alicante (Spain). This institution offers a web service (WFS) that allows retrieval of 2D geometries from any building within its campus. We demonstrate how geospatial technologies and computational geometry algorithms can be used for automating the creation and optimization of evacuation routes. In our case study, the engineers’ task is to verify that the load capacity of each emergency exit does not exceed the standards specified by Spain’s current regulations. Using Dijkstra’s algorithm, we obtain the shortest paths from every room to the most appropriate emergency exit. Once these paths are calculated, engineers can run simulations and validate, based on path statistics, different cluster configurations. Techniques and tools applied in this research would be helpful in the design and risk management phases of any complex building project.

Advances in camera trap data management tools: Towards collaborative development and integration with GIS

Camera traps have become a widely used technique for conducting biological inventories, generating a large number of database records of great interest. The main aim of this paper is to describe a new free and open source software (FOSS), developed to facilitate the management of camera-trapped data which originated from a protected Mediterranean area (SE Spain). In the last decade, some other useful alternatives have been proposed, but ours focuses especially on a collaborative undertaking and on the importance of spatial information underpinning common camera trap studies. This FOSS application, namely, “Camera Trap Manager” (CTM), has been designed to expedite the processing of pictures on the .NET platform. CTM has a very intuitive user interface, automatic extraction of some image metadata (date, time, moon phase, location, temperature, atmospheric pressure, among others), analytical (Geographical Information Systems, statistics, charts, among others), and reporting capabilities (ESRI Shapefiles, Microsoft Excel Spreadsheets, PDF reports, among others). Using this application, we have achieved a very simple management, fast analysis, and a significant reduction of costs. While we were able to classify an average of 55 pictures per hour manually, CTM has made it possible to process over 1000 photographs per hour, consequently retrieving a greater amount of data.

Has the European ICT sector a chance to be competitive? Bruges European Economic Policy (BEEP) Briefing 14/2006

In this paper we try to present the main trends of evolution of the ICT sector. Its dynamics, supported by a constant technical progress in ICs, compounded with “non convexities” such as network effects and high sunk costs, may either lead to a Schumpeter Mark I or Schumpeter Mark II competition regime. This means that in some segments, the market will be more competitive (Mark I), while in other it will be more monopolistic (Mark II). But a key trend is also the so called “convergence”. But digitization makes it cost effective to integrate different communications, information processing and entertainment systems and devices. Hence, Schumpeter Mark II grows at the core where software production dominates, while Schumpeter Mark I is established at the periphery. In this context, the European ICT industry is potentially smashed between two forces: the cost advantages of Asian countries on one hand, the inventiveness and dynamism of the US industry on the other hand. The way out of this very difficult situation is to create in Europe the conditions of restoring knowledge accumulation in a key sub-sector of ICT, that is software production. To do this, Europe can rely on its tradition of cooperation and knowledge sharing and on a set of institutions that have shown their ability to stimulate inter-regional cooperation. By concentrating on an ambitious project of open source software production in embarked systems and domestic networks, Europe could reach several objectives: to make freely accessible an essential facility, to stimulate competition, to help reaching the Lisbon objectives and to restore the European competitiveness in ICT.

Polymorphism in the Spotlight: Studying its Prevalence in Java and Smalltalk

Subtype polymorphism is a cornerstone of object-oriented programming. By hiding variability in behavior behind a uniform interface, polymorphism decouples clients from providers and thus enables genericity, modularity and extensi- bility. At the same time, however, it scatters the implementation of the behavior over multiple classes thus potentially hampering program comprehension. The extent to which polymorphism is used in real programs and the impact of polymorphism on program comprehension are not very well understood. We report on a preliminary study of the prevalence of polymorphism in several hundred open source software systems written in Smalltalk, one of the oldest object-oriented programming languages, and in Java, one of the most widespread ones. Although a large portion of the call sites in these systems are polymorphic, a majority have a small number of potential candidates. Smalltalk uses polymorphism to a much greater extent than Java. We discuss how these findings can be used as input for more detailed studies in program comprehension and for better developer support in the IDE.

UMA NOVA CARTOGRAFIA COGNITIVA PARA O ENSINO DA COMUNICAÇÃO

O trabalho proposto é a montar um projeto exploratório funcional que parta da cartografia cognitiva, que é definida como a arte, teoria e técnica de construir mapas do conhecimento, visando com esta cartografia a sua aplicabilidade na estruturação de um conjunto de cursos/saberes da área da Comunicação. Assemelhado ao conceito de mapas conceituais, ou cognitivos, representam o conhecimento organizado e são compostos por conceitos. Este mapas foram desenvolvido a partir da década de setenta por vários pesquisadores. A tese experimento foi montada tendo como base os softwares de relacionamento por temas e interesses dentro de um ambiente de interatividade tridimensional , montado no conceito de arvore do conhecimento relacional. Esta experiência é construída em ambiente tridimensional com uso de softwares 3D que rodam como aplicativos de engines de vídeo games, que são motores gráficos. A base de dados e a interatividade de textos e tarefas é realizada sob a plataforma do MediaWiki, que é o software aberto que roda a Wikipédia. A plataforma de mapas roda dentro de um software MindJet MindManager e do CMAPS. As vídeo conferências são administradas pelo FlashMeeting, de Web conferência. A maioria deles são softwares abertos. Todos operando em sistemas presenciais ou de modulação EAD. A base conceitual está estruturada dentro de uma visão de educação disruptiva, que lança um novo modelo educacional baseado em mapas, visto dentro de uma abordagem de um mundo de múltiplas telas, um mundo da era hiper, um mundo hipermoderno, que tem como base uma cultura da era tecnológica, numa renovação dos conceitos de Cultura, agora revigorados à luz das novas tecnologias e da nova sociedade interligada em rede.

Steps and bumps:precision extraction of discrete states of molecular machines

We report statistical time-series analysis tools providing improvements in the rapid, precision extraction of discrete state dynamics from time traces of experimental observations of molecular machines. By building physical knowledge and statistical innovations into analysis tools, we provide techniques for estimating discrete state transitions buried in highly correlated molecular noise. We demonstrate the effectiveness of our approach on simulated and real examples of steplike rotation of the bacterial flagellar motor and the F1-ATPase enzyme. We show that our method can clearly identify molecular steps, periodicities and cascaded processes that are too weak for existing algorithms to detect, and can do so much faster than existing algorithms. Our techniques represent a step in the direction toward automated analysis of high-sample-rate, molecular-machine dynamics. Modular, open-source software that implements these techniques is provided.

Designing the System of Remote Knowledge Diagnosing for Students of Technical Specialties

In the article the theoretical aspects of planning of the systems of the controlled from distance diagnosing of level of know ledges of students are resulted on the basis of modern pedagogical theoretical and technological approaches. The practical results of creation of the systems of this type are resulted for organization of testing both in the structure of local networks of higher educational establishments and with access through the global network of Internet.

Свободният софтуер в образованието

Доклад, поместен в сборника на Националната конференция "Образованието в информационното общество", Пловдив, май 2011 г.

Bulgarian Digital Mathematical Library BulDML and Czech Digital Mathematical Library DML-CZ as parts of the European Digital Mathematics Library EuDML

The paper presents in brief the Bulgarian Digital Mathematical Library BulDML and the Czech Digital Mathematical Library DML-CZ. Both libraries use the open source software DSpace and both are partners in the European Digital Mathematics Library EuDML. We describe their content and metadata schemas; outline the architecture system and overview the statistics of its use.

Reproducible computing with Tzar and Docker

The potential for sharing environmental data and models is huge, but can be challenging for experts without specific programming expertise. We built an open-source, cross-platform framework (‘Tzar’) to run models across distributed machines. Tzar is simple to set up and use, allows dynamic parameter generation and enhances reproducibility by accessing versioned data and code. Combining Tzar with Docker helps us lower the entry barrier further by versioning and bundling all required modules and dependencies, together with the database needed to schedule work.

Spatial ecological complexity measures in GRASS GIS

Good estimates of ecosystem complexity are essential for a number of ecological tasks: from biodiversity estimation, to forest structure variable retrieval, to feature extraction by edge detection and generation of multifractal surface as neutral models for e.g. feature change assessment. Hence, measuring ecological complexity over space becomes crucial in macroecology and geography. Many geospatial tools have been advocated in spatial ecology to estimate ecosystem complexity and its changes over space and time. Among these tools, free and open source options especially offer opportunities to guarantee the robustness of algorithms and reproducibility. In this paper we will summarize the most straightforward measures of spatial complexity available in the Free and Open Source Software GRASS GIS, relating them to key ecological patterns and processes.