Building the foundations for a market-oriented planning system in Bulgaria

Planning is highly conditioned by the relationships between the market, state and politics. This becomes particularly clear in looking at the changes taking place in the countries of the former Communist block as they attempt to establish a new set of relationships. The old power structures have been dislodged and old laws discarded. This paper examines the situation in Bulgaria and explores the preconditions for setting up a new planning system there. The first section outlines the political changes since 1989 and shows how political instability has effected the pace of change. The establishment of a market in land and property is a second precondition for the planning system there and moves in this direction are presented, including restitution policies. Finally the issues raised by the early attempts towards a new planning system are discussed. This paper is the first of a series looking at the countries of Eastern Europe and the author would welcome comments from others working in this field.

Towards a life-event oriented G2C e-service provision: the NoBLE Framework

One of the primary features of modern government-to-citizen (G2C) service provision is the ability to offer a citizen-centric view of the e-government portal. Life-event approach is one of the most widely adopted paradigms supporting the idea of solving a complex event in a citizen’s life through a single service provision. Several studies have used this approach to design e-government portals. However, they were limited in terms of use and scalability. There were no mechanisms that show how to specify a life-event for structuring public e-services, or how to systematically match life-events with these services taking into consideration the citizen needs. We introduce the NOrm-Based Life-Event (NoBLE) framework for G2C e-service provision with a set of mechanisms as a guide for designing active life-event oriented e-government portals.

Towards a semiotic approach to practice-oriented knowledge transfer

With the rapid growth of information and technology, knowledge is a valuable asset in organisation which has become significant as a strategic resource. Many studies have focused on managing knowledge in organisations. In particular, knowledge transfer has become a significant issue concerned with the movement of knowledge across organisational boundaries. It enables the exploitation and application of existing knowledge for other organisations, reducing the time of creating knowledge, and minimising the cost of organisational learning. One way to capture knowledge in a transferrable form is through practice. In this paper, we discuss how organisations can transfer knowledge through practice effectively and propose a model for a semiotic approach to practice-oriented knowledge transfer. In this model, practice is treated as a sign that represents knowledge, and its localisation is analysed as a semiotic process.

The "Fair trade nation": market-oriented development in devolved European regions

Scholars have largely ignored the roles played by government and public sector institutions in the fair trade movement. This article addresses the knowledge gap through examining government involvement in fair trade networks in the context of European devolution and the localization of international development action. Proposing a relational view of fair trade networks, and considering the Fair Trade Nation as a social category for development, it highlights how power sources outside the centralized nation-state permit a political community to associate itself with fair trade. Research from Wales demonstrates that government acts in a leadership role rather than as regulator, conferring political voice and finance while enhancing its international credentials and contributing to the politics of nation-building. Our conclusion is cautious; campaigners celebrate political commitment to fair trade embodied within the category of the Fair Trade Nation, but evidence suggests that government reliance on the market as a vehicle for decentralized development action is limited by how the Fair Trade Nation is currently executed.

The design of a semantics-oriented organisational performance measurement system

Current methods and techniques used in designing organisational performance measurement systems do not consider the multiple aspects of business processes or the semantics of data generated during the lifecycle of a product. In this paper, we propose an organisational performance measurement systems design model that is based on the semantics of an organisation, business process and products lifecycle. Organisational performance measurement is examined from academic and practice disciplines. The multi-discipline approach is used as a research tool to explore the weaknesses of current models that are used to design organisational performance measurement systems. This helped in identifying the gaps in research and practice concerning the issues and challenges in designing information systems for measuring the performance of an organisation. The knowledge sources investigated include on-going and completed research project reports; scientific and management literature; and practitioners’ magazines.

Semiotic approach to a practice-oriented knowledge transfer

Knowledge is a valuable asset in organisations that has become significant as a strategic resource in the information age. Many studies have focused on managing knowledge in organisations. In particular, knowledge transfer has become a significant issue concerned with the movement of knowledge across organisational boundaries. One way to capture knowledge in a transferrable form is through practice. In this paper, we discuss how organisations can transfer knowledge through practice effectively and propose a model for a semiotic approach to practice-oriented knowledge transfer. In this model, practice is treated as a sign that represents knowledge, and its localisation is analysed as a semiotic process.

A strategy for process-oriented validation of coupled chemistry–climate models

Evaluating CCMs with the presented framework will increase our confidence in predictions of stratospheric ozone change.

Artefact-oriented business process modelling: an ontological dependency approach

Business process modelling can help an organisation better understand and improve its business processes. Most business process modelling methods adopt a task- or activity-based approach to identifying business processes. Within our work, we use activity theory to categorise elements within organisations as being either human beings, activities or artefacts. Due to the direct relationship between these three elements, an artefact-oriented approach to organisation analysis emerges. Organisational semiotics highlights the ontological dependency between affordances within an organisation. We analyse the ontological dependency between organisational elements, and therefore produce the ontology chart for artefact-oriented business process modelling in order to clarify the relationship between the elements of an organisation. Furthermore, we adopt the techniques from semantic analysis and norm analysis, of organisational semiotics, to develop the artefact-oriented method for business process modelling. The proposed method provides a novel perspective for identifying and analysing business processes, as well as agents and artefacts, as the artefact-oriented perspective demonstrates the fundamental flow of an organisation. The modelling results enable an organisation to understand and model its processes from an artefact perspective, viewing an organisation as a network of artefacts. The information and practice captured and stored in artefact can also be shared and reused between organisations that produce similar artefacts.

Control and analysis of oriented thin films of lipid inverse bicontinuous cubic phases using grazing incidence small-angle X‑ray scattering

Lipid cubic phases are complex nanostructures that form naturally in a variety of biological systems, with applications including drug delivery and nanotemplating. Most X-ray scattering studies on lipid cubic phases have used unoriented polydomain samples as either bulk gels or suspensions of micrometer-sized cubosomes. We present a method of investigating cubic phases in a new form, as supported thin films that can be analyzed using grazing incidence small-angle X-ray scattering (GISAXS). We present GISAXS data on three lipid systems: phytantriol and two grades of monoolein (research and industrial). The use of thin films brings a number of advantages. First, the samples exhibit a high degree of uniaxial orientation about the substrate normal. Second, the new morphology allows precise control of the substrate mesophase geometry and lattice parameter using a controlled temperature and humidity environment, and we demonstrate the controllable formation of oriented diamond and gyroid inverse bicontinuous cubic along with lamellar phases. Finally, the thin film morphology allows the induction of reversible phase transitions between these mesophase structures by changes in humidity on subminute time scales, and we present timeresolved GISAXS data monitoring these transformations.

Optimal steady motions for oriented vehicles

Motivated by the motion planning problem for oriented vehicles travelling in a 3-Dimensional space; Euclidean space E3, the sphere S3 and Hyperboloid H3. For such problems the orientation of the vehicle is naturally represented by an orthonormal frame over a point in the underlying manifold. The orthonormal frame bundles of the space forms R3,S3 and H3 correspond with their isometry groups and are the Euclidean group of motion SE(3), the rotation group SO(4) and the Lorentzian group SO(1; 3) respectively. Orthonormal frame bundles of space forms coincide with their isometry groups and therefore the focus shifts to left-invariant control systems defined on Lie groups. In this paper a method for integrating these systems is given where the controls are time-independent. For constant twist motions or helical motions, the corresponding curves g(t) 2 SE(3) are given in closed form by using the well known Rodrigues’ formula. However, this formula is only applicable to the Euclidean case. This paper gives a method for computing the non-Euclidean screw/helical motions in closed form. This involves decoupling the system into two lower dimensional systems using the double cover properties of Lie groups, then the lower dimensional systems are solved explicitly in closed form.

Pragmatic oriented data interoperability for smart healthcare information systems

Smart healthcare is a complex domain for systems integration due to human and technical factors and heterogeneous data sources involved. As a part of smart city, it is such a complex area where clinical functions require smartness of multi-systems collaborations for effective communications among departments, and radiology is one of the areas highly relies on intelligent information integration and communication. Therefore, it faces many challenges regarding integration and its interoperability such as information collision, heterogeneous data sources, policy obstacles, and procedure mismanagement. The purpose of this study is to conduct an analysis of data, semantic, and pragmatic interoperability of systems integration in radiology department, and to develop a pragmatic interoperability framework for guiding the integration. We select an on-going project at a local hospital for undertaking our case study. The project is to achieve data sharing and interoperability among Radiology Information Systems (RIS), Electronic Patient Record (EPR), and Picture Archiving and Communication Systems (PACS). Qualitative data collection and analysis methods are used. The data sources consisted of documentation including publications and internal working papers, one year of non-participant observations and 37 interviews with radiologists, clinicians, directors of IT services, referring clinicians, radiographers, receptionists and secretary. We identified four primary phases of data analysis process for the case study: requirements and barriers identification, integration approach, interoperability measurements, and knowledge foundations. Each phase is discussed and supported by qualitative data. Through the analysis we also develop a pragmatic interoperability framework that summaries the empirical findings and proposes recommendations for guiding the integration in the radiology context.

Fairness quality: the role of fairness in a social and ethically oriented marketing landscape

Research into the dark side of customer management and marketing is progressively growing. The marketing landscape today is dominated with suspicion and distrust as a result of practices that include hidden fees, deception and information mishandling. In such a pessimistic economy, marketers must reconceptualise the notion of fairness in marketing and customer management, so that the progress of sophisticated customisation schemes and advancements in marketing can flourish, avoiding further control and imposed regulation. In this article, emerging research is drawn to suggest that existing quality measures of marketing activities, including service, relationships and experiences may not be comprehensive in measuring the relevant things in the social and ethically oriented marketing landscape, and on that basis does not measure the fairness which truly is important in such an economy. The paper puts forward the concept of Fairness Quality (FAIRQUAL), which includes as well as extends on existing thinking behind relationship building, experience creation and other types of customer management practices that are believed to predict consumer intentions. It is proposed that a fairness quality measure will aid marketers in this challenging landscape and economy.

Rationality of service composition of Workflow Net in a service oriented architecture

Users’ requirements change drives an information system evolution. Consequently, such evolution affects those atomic services which provide functional operations from one state of their composition to another state of composition. A challenging issue associated with such evolution of the state of service composition is to ensure a resultant service composition remaining rational. This paper presents a method of Service Composition Atomic-Operation Set (SCAOS). SCAOS defines 2 classes of atomic operations and 13 kinds of basic service compositions to aid a state change process by using Workflow Net. The workflow net has algorithmic capabilities to compose the required services with rationality and maintain any changes to the services in a different composition also rational. This method can improve the adaptability to the ever changing business requirements of information systems in the dynamic environment.

Service oriented approach to facility management using extended building information modelling

Facility management (FM), from a service oriented approach, addresses the functions and requirements of different services such as energy management, space planning and security service. Different service requires different information to meet the needs arising from the service. Object-based Building Information Modelling (BIM) is limited to support FM services; though this technology is able to generate 3D models that semantically represent facility’s information dynamically over the lifecycle of a building. This paper presents a semiotics-inspired framework to extend BIM from a service-oriented perspective. The extended BIM, which specifies FM services and required information, will be able to express building service information in the right format for the right purposes. The service oriented approach concerns pragmatic aspect of building’s information beyond semantic level. The pragmatics defines and provides context for utilisation of building’s information. Semiotics theory adopted in this paper is to address pragmatic issues of utilisation of BIM for FM services.

Experimental evidence for proposed transformation pathway from the inverse hexagonal to inverse diamond cubic phase from oriented lipid samples

A macroscopically oriented inverse hexagonal phase (HII) of the lipid phytantriol in water is converted to an oriented inverse double diamond bicontinuous cubic phase (QIID). The initial HII phase is uniaxially oriented about the long axis of a capillary with the cylinders parallel to the capillary axis. The HII phase is converted by cooling to a QII D phase which is also highly oriented, where the cylindrical axis of the former phase has been converted to a ⟨110⟩ axis in the latter, as demonstrated by small-angle X-ray scattering. This epitaxial relationship allows us to discriminate between two competing proposed geometric pathways to convert HII to QIID. Our findings also suggest a new route to highly oriented cubic phase coatings, with applications as nanomaterial templates.