Narratives of possession : reading for saga authorship

The aim of this thesis is to show how character analysis can be used to approach conceptions of saga authorship in medieval Iceland. The idea of possession is a metaphor that is adopted early in the thesis, and is used to describe Icelandic sagas as works in which traditional material is subtly interpreted by medieval authors. For example, we can say that if authors claim greater possession of the sagas, they interpret, and not merely record, the sagas' historical information. On the other hand, tradition holds onto its possession of the narrative whenever it is not possible for an author to develop his own creative and historical interests. The metaphor of possession also underpins the character analysis in the thesis, which is based on the idea that saga authors used characters as a vehicle by which to possess saga narratives and so develop their own historical interests. The idea of possession signals the kinds of problems of authorship study which are addressed here, in particular, the question of the authors' sense of saga writing as an act either of preservation or of creation. While, in that sense, the thesis represents an additional voice in a long-standing debate about the saga writers' relation to their source materials, I argue against a clear-cut distinction between creative and non-creative authors, and focus instead on the wide variation in authorial control over saga materials. This variation suggests that saga authorship is a multi-functional activity, or one which co-exists with tradition. Further, by emphasising characterisation as a method, I am adding to the weight of scholarship that seeks to understand the sagas in terms of their literary effects. The Introduction and chapter one lay out the theoretical scope of this thesis. My aim in these first two sections is to inform the reader of the type of critical questions that arise when authorship is approached in relation to characterisation, and to suggest an interpretive framework with which to approach these questions. In the Introduction this aim manifests as a brief discussion of the application of the term "authorship" to the medieval Icelandic corpus, a definition of the scope of this study, and an introduction to the connections, made throughout this thesis, between saga authors, the sagas' narrative style, and the style of characterisation in the sagas. Chapter one is a far more detailed discussion of our ability to make these connections. In particular, the chapter develops the definition of the analytical term "secondary authorship" that I introduce in order to delineate the type of characterisation that is of most interest in this thesis. "Secondary authorship" is a literary term that aims to sharpen our approach to saga authors' relationship to their characters by focusing on characters who make representations about the events of the saga. The term refers to any instance in which characters behave in a manner that resembles the creativity, interpretation, and understanding associated with authorship more generally. Character analysis cannot, however, be divorced from socio-historical approaches to the saga corpus. Most importantly, the sagas themselves are socio-historical representations that claim some degree of truth value. This claim that the sagas make by implication about their historicity is the starting point of a discussion of authorship in medieval Iceland. Therefore, at the beginning of chapter one I discuss some of the approaches to the social context of saga writing. This discussion serves as an introduction to both the culture of saga writing in medieval Iceland and to the nature of the sagas' historical perspective, and reflects my sense that literary interpretations of the sagas cannot be isolated from the historical discourses that frame them. The chapter also discusses possession, which, as I note above, is used alongside the concept of secondary authorship to describe the saga authors' relationship with the stories and characters of the past. At the close of chapter one, I offer a preliminary list the various functions of saga authorship, and give some examples of secondary authorship. From this point I am able to tie my argument about secondary authorship to specific examples from the sagas. Chapter two examines the effect of family obligations and domestic points of view in the depiction of characters' choices and conception of themselves. The examples that are given in that chapter - from Gisla saga Súrssonar and Íslendinga saga - are the first of a number of textual analyses that demonstrate the application of the concepts of secondary authorship and possession of saga narratives. The relationship between narratives about national and domestic matters shows how authorial creativity in the area of kinship obligation provides the basis for the saga's development of historical themes. Thus, the two major case studies given in chapter two tie authorial engagement with characters to the most influential social institution in early and medieval Iceland, the family. The remaining chapters represent similar attempts to relate authorial possession of saga characters to central socio-historical themes in the sagas, such as the settlement process in early Iceland and its influence on the development of regional political life (chapter three). Likewise, the strong authorial interest in an Icelander's journey to Norway in Heimskringla is presented as evidence of the author's use of a saga character to express an Icelandic interpretation of Norwegian history and to promote a sense that Iceland shared the ownership of regal history with Norway (chapter four). In that authorial engagement with the Icelander abroad, we witness saga characterisation being used as a basis for historical interpretation and the means by which foreign traditions and influence, not least the narratives of royal lives and of the Christianisation, are claimed as part of medieval Icelanders' self-conception. While saga authors observe the conventions of saga narration, characters are often subtly positioned as the authors' interpretive mirrors, especially clear than when they act as secondary authors. Nowhere is this more apparent than in Brennu- Njáls saga, which contains many characters who voice the author's claim to interpret the past. Even Hrútr Herjólfsson, through his remarkable perception of events and his conspicuous comments about them, acts as a secondary author by enabling the author to emphasise the importance of the disposition of characters. In Laxdœla saga and Þorgils saga ok Hafliða, authorial interest in characters' perception is matched by the thematising of learning, from the inception of knowledge as prophecy or advice to complete understanding by saga characters (chapter six). In Þorgils saga skarða, a character's inner development from an excessively ambitious and politically ruthless youth to a Christian leader killed by his kinsman allows the author to shape a political life into a lesson about leadership and the community's ability to moderate and contain the behaviour of extraordinary individuals. The portrayal draws on methods of characterisation that we can identify in Grettis saga Ásmundarson, Fóstbrœðra saga, and Orkneyinga saga. A comparison of the characterisation of figures with intense political or military ambitions suggests that saga authors were interested in the community's ability to balance their strength and ability with a degree of social moderation. The discussion of these sagas shows that character study can be used to analyse how the saga authors added their own voice to the voices passed down to medieval Icelanders in traditional narratives. Authorial engagement with characters allowed inherited traditions about early Norway and Iceland and records of thirteenth century events to be transformed into sophisticated historical works with highly creative elements. Through secondary authorship, saga authors took joint-possession of narratives and contested the power of tradition in setting the interpretive framework of a saga.

Physical activity and physical fitness in African-American girls with and without obesity

Lack of physical activity and low levels of physical fitness are thought to be contributing factors to the high prevalence of obesity in African-American girls, To examine this hypothesis, we compared habitual physical activity and physical fitness in 54 African-American girls with obesity and 96 African-American girls without obesity residing in rural South Carolina, Participation in vigorous (greater than or equal to 6 METs) (VPA) or moderate and vigorous physical activity (greater than or equal to 4 METs) (MVPA) was assessed on three consecutive days using the Previous Day Physical Activity Recall, Cardiorespiratory fitness was assessed using the PWC 170 cycle ergometer test, Upper body strength was determined at two sites via isometric cable tensiometer tests, Relative to their counterparts without obesity, girls with obesity reported significantly fewer 30-minute blocks of VPA (0.90 +/- 0.14 vs. 1.3 +/- 0.14) and MVPA (1.2 +/- 0.18 vs. 1.7 +/- 0.16) (p<0.01), Within the entire sample, VPA and MVPA were inversely associated with body mass index (r=-0.17 and r=-0.19) and triceps skinfold thickness (r=-0.19 and r=-0.22) (p<0.05), In the PWC 170 test and isometric strength tests, girls with obesity demonstrated absolute scores that were similar to, or greater than, those of girls without obesity; however, when scores were expressed relative to bodyweight, girls with obesity demonstrated significantly lower values (p<0.05). The results support the hypothesis that lack of physical activity and low physical fitness are important contributing factors in the development and/or maintenance of obesity in African-American girls.

A sensor fault detection and isolation method in interior permanent-magnet synchronous motor drives based on an extended Kalman filter

Interior permanent-magnet synchronous motors (IPMSMs) become attractive candidates in modern hybrid electric vehicles and industrial applications. Usually, to obtain good control performance, the electric drives of this kind of motor require one position, one dc link, and at least two current sensors. Failure of any of these sensors might lead to degraded system performance or even instability. As such, sensor fault resilient control becomes a very important issue in modern drive systems. This paper proposes a novel sensor fault detection and isolation algorithm based on an extended Kalman filter. It is robust to system random noise and efficient in real-time implementation. Moreover, the proposed algorithm is compact and can detect and isolate all the sensor faults for IPMSM drives. Thorough theoretical analysis is provided, and the effectiveness of the proposed approach is proven by extensive experimental results.

Flying supercapacitors as power smoothing elements in wind generation

This paper presents a capacitor-clamped three-level inverter-based supercapacitor direct integration scheme for wind energy conversion systems. The idea is to increase the capacitance of clamping capacitors with the use of supercapacitors and allow their voltage to vary within a defined range. Even though this unique approach eliminates the need of interfacing dc-dc converters for supercapacitors, the variable voltage operation brings about several challenges. The uneven distribution of space vectors is the major modulation challenge. A space vector modulation method is proposed in this paper to address this issue and to generate undistorted currents even in the presence of dynamic changes in supercapacitor voltages. A supercapacitor voltage equalization algorithm is also presented. Moreover, control strategies of the proposed system are discussed in detail. Simulation and experimental results are presented to verify the efficacy of the proposed system in suppressing short-term wind power fluctuations.

Modeling and analysis of a novel variable-speed cage induction generator

This paper introduces a novel cage induction generator and presents a mathematical model, through which its behavior can be accurately predicted. The proposed generator system employs a three-phase cage induction machine and generates single-phase and constant-frequency electricity at varying rotor speeds without an intermediate inverter stage. The technique uses any one of the three stator phases of the machine as the excitation winding and the remaining two phases, which are connected in series, as the power winding. The two-series-connected-and-one-isolated (TSCAOI) phase winding configuration magnetically decouples the two sets of windings, enabling independent control. Electricity is generated through the power winding at both sub- and super-synchronous speeds with appropriate excitation to the isolated single winding at any frequency of generation. A dynamic mathematical model, which accurately predicts the behavior of the proposed generator, is also presented and implemented in MATLAB/Simulink. Experimental results of a 2-kW prototype generator under various operating conditions are presented, together with theoretical results, to demonstrate the viability of the TSCAOI power generation. The proposed generator is simple and capable of both storage and retrieval of energy through its excitation winding and is expected to be suitable for applications, such as small wind turbines and microhydro systems.

Design of a robust grid interface system for PMSG-based wind turbine generators

A robust and reliable grid power interface system for wind turbines using a permanent-magnet synchronous generator (PMSG) is proposed in this paper, where an integration of a generator-side three-switch buck-type rectifier and a grid-side Z-source inverter is employed as a bridge between the generator and the grid. The modulation strategy for the proposed topology is developed from space-vector modulation and Z-source network operation principles. Two PMSG control methods, namely, unity-power-factor control and rotor-flux-orientation control (Id = 0), are studied to establish an optimized control scheme for the generator-side three-switch buck-type rectifier. The system control scheme decouples active- and reactive-power control through voltage-oriented control and optimizes PMSG control for the grid- and generator-side converters independently. Maximum power point tracking is implemented by adjusting the shoot-through duty cycles of the Z-source network. The design considerations of the passive components are also provided. The performances and practicalities of the designed architecture have been verified by simulations and experiments.

Five-level current-source inverters with buck-boost and inductive-current balancing capabilities

This paper presents new five-level current-source inverters (CSIs) with voltage/current buck-boost capability, unlike existing five-level CSIs where only voltage-boost operation is supported. The proposed inverters attain self-inductive-current-balancing per switching cycle at their dc front ends without having to include additional balancing hardware or complex control manipulation. The inverters can conveniently be controlled by using the well-established phase-shifted carrier modulation scheme with only two additional linear references and a mapping logic table needed. Existing modulators can therefore be conveniently retrofitted for controlling the presented inverters. By appropriately coordinating the inverter gating signals, their implementations can be realized by using the least number of components without degrading performance. These enhanced features of the inverters have already been verified in simulation and experimentally using a scaled-down laboratory platform.

The Hollywood effect : a comparative study of costume in Australia and the Proposition

This paper compares costuming practices in Baz Luhrmann’s Australia (2008) and John Hillcoat’s The Proposition (2005) and argues that high production values, such as in the blockbuster Australia, are not neutral mechanisms of production, but powerful prescriptive elements which do not result in a successful representation of cultural specificity. Australia is a typical blockbuster, it employs a large number of extras, it features compelling landscape shots, has been shot across four different locations and sets, and, importantly, is an international production with the 20th Century Fox. The film’s costumes were designed by Catherine Martin, who received an Oscar nomination in 2009. While global exposure of fashion in film and through celebrities’ endorsements has consolidated a historical synergy between the fashion industry and Hollywood, the Australian film and fashion industries have had a very limited exchange. Baz Luhrmann’s film is Australia’s first instance of promo-costuming and use of tie-in labels (Ferragamo, R.M.Williams, Prada, Paspaley). Catherine Martin thoroughly researched 1930s women’s wear, indigenous and stockmen’s clothing, and set up to make all costumes with a large team of costumiers and seamstresses, striving for authenticity. The Proposition won its costume designer Margot Wilson an AFI in 2005 for best costume, but compared to Australia the story, location and costumes are far harsher. Filmed around Winton in far west Queensland, the director John Hillcoat and Director of Photography Benoit Delhomme were insistent about realism, and emphasising the harshness of the Australian landscape. The realism of the costumes was derived from the fabrics and manufacturing, as well as the way they were shot, with the actors often wearing two or three layers of heavy wool during days of shooting in 50 degree heat, and the details of making and breaking down. The implication is that both films are culturally specific as they both deal with an Australian story. However, Australia is clearly produced according to a Hollywood blockbuster model, and closely matches Hollywood’s narrative and aesthetic characteristics, while The Proposition is a more modest film that eschews these conventions of beauty and glossed history. Despite its western genre-orientation, The Proposition is more successful than Australia when it comes to costuming, because its costumes are not only functional to the narrative, but, in Roland Barthes’ words, they also fulfil a prestation. This prestation highlights the social and cultural conflicts on which colonial Australia was founded, instead of gilding, and gliding, over them.

SWIRLnet : portable anemometer network for wind speed measurements of land-falling tropical cyclones

Wind speed measurement systems are sparse in the tropical regions of Australia. Tropical cyclone wind speeds impacting communities are often ‘guestimated’ from analyzing damaged structures. A re-locatable anemometer system is required to enable measurements of wind speeds. This paper discusses design criteria of the tripods and tie down system, proposed deployment of the anemometers, instrumentation, and data logging. Preliminary assessment of the anemometer response indicates a reliable system for 1 second response, however, it is noted that the Australian building code and wind loading standard uses a moving average time of approximately 0.2 seconds for its wind speed design criteria.

Wind speed measurements of land-falling tropical cyclones using SWIRLnet, a portable anemometer network

Wind speed measurement systems are sparse in the tropical regions of Australia. Given this, tropical cyclone wind speeds impacting communities are seldom measured and often only ‘guestimated’ by analysing the extent of damage to structures. In an attempt to overcome this dearth of data, a re-locatable network of anemometers to be deployed prior to tropical cyclone landfall is currently being developed. This paper discusses design criteria of the network’s tripods and tie down system, proposed deployment of the anemometers, instrumentation and data logging. Preliminary assessment of the anemometer response indicates a reliable system for measuring the spectral component of wind with frequencies of approximately 1 Hz. This system limitation highlights an important difference between the capabilities of modern instrumentation and that of the Dines anemometer (around 0.2 seconds) that was used to develop much of the design criteria within the Australian building code and wind loading standard.

Unconventional Ni–P alloy-catalyzed CVD of carbon coil-like micro- and nano-structures

Conventional catalyzed thermal CVD of carbon microcoils commonly suffers from poor control of the coil shape and morphology and rarely reaches the nanoscale size range. This article reports on an unconventional Ni-P alloy-catalyzed, high-throughput, highly reproducible CVD of ultra-long carbon coil-like micro- and nano-structures using acetylene precursor at relatively low process temperatures. Helical carbon microcoils with consistently uniform, circular cross-sections and a high degree of crystallinity have been synthesized at 750 °C. A further reduction of the temperature to 650 °C led to the growth of ultra-long (up to several mm) wave-like carbon nanofibers made of two nanowires with the diameters in the 100-200 nm range. The results of the XRD and Raman analysis reveal that the nanofibers feature only a slightly more disordered structure compared to the microcoils. Our results suggest that morphology and structure of the carbon coil-like micro- and nano-structures can be tailored by the appropriate alloying of the catalyst and the choice of the CVD process parameters.

Free pussy riot crazy quilt

Digital photographs sewn onto secondhand tie-dye t-shirts. The work continues Wyman's interest in exploring feminist strategies for negotiating individual and collective identiities, equality and social activism.

Social clothing experiments

Social Clothing Experiments was a large-scale outdoor installation staged for the opening of the Pacific Standard Time exhibition at the Getty Center in 2011. It was part of a ten day performance festival.Each body-pillow was made out of second-hand tie-dyed t-shirts that were patch-worked together in various formations. The public was welcomed to move, play and rest with the installation.It explores Wyman's interest in art's role in social engagement and participation.

Regulating supply-chains to address the occupational health and safety problems associated with precarious employment: The case of home-based clothing workers in Australia

Over the past 20 years the labour market, workforce and work organisation of most if not all industrialised countries have been significantly refashioned by the increased use of more flexible work arrangements, variously labelled as precarious employment or contingent work. There is now a substantial and growing body of international evidence that many of these arrangements are associated with a significant deterioration in occupational health and safety (OHS), using a range of measures such as injury rates, disease, hazard exposures and work-related stress. Moreover, there is an emerging body of evidence that these arrangements pose particular problems for conventional regulatory regimes. Recognition of these problems has aroused the concern of policy makers - especially in Europe, North America and Australia - and a number of responses have been adopted in terms of modifying legislation, producing new guidance material and codes of practice and revised enforcement practices. This article describes one such in itiative in Australia with regard to home-based clothing workers. The regulatory strategy developed in one Australian jurisdiction (and now being ‘exported’ into others) seeks to counter this process via contractual tracking mechanisms to follow the work, tie in liability and shift overarching legal responsibility to the top of the supply chain. The process also entails the integration of minimum standards relating to wages, hours and working conditions; OHS and access to workers’ compensation. While home-based clothing manufacture represents a very old type of ‘flexible’ work arrangement, it is one that regulators have found especially difficult to address. Further, the elaborate multi-tiered subcont racting and diffuse work locations found in this industry are also characteristic of newer forms of contingent work in other industries (such as some telework) and the regulatory challenges they pose (such as the tendency of elaborate supply chains to attenuate and fracture statutory responsibilities, at least in terms of the attitudes and behaviour of those involved).

Building the safety case for UAS operations in support of natural disaster response

A framework supporting the systematic development of safety cases for Unmanned Aircraft System (UAS) operations in a broad range of civil and commercial applications is presented. The case study application is the use of UAS for disaster response. In those States where regulations do not preclude UAS operations altogether, approvals for UAS operations can be granted on a case-by-case basis contingent on the provision of a safety case acceptable to the relevant National Airworthiness Authority (NAA). A safety case for UAS operations must show how the risks associated with the hazards have been managed to an acceptable level. The foundational components necessary for structuring and assessing these safety cases have not yet been proposed. Barrier-bow-tie models are used in this paper to structure the safety case for the two primary hazards of 1) a ground impact, and 2) a Mid-Air Collision (MAC). The models establish the set of Risk Control Variables (RCVs) available to reduce the risk. For the ground-impact risk model, seven RCVs are identified which in combination govern the probability of an accident. Similarly, ten RCVs are identified within the MAC model. The effectiveness of the RCVs and how they can implemented in terms of processes, policies, devices, practices, or other actions for each of the case-study applications are discussed. The framework presented can provide for the more systematic and consistent regulation of UAS through a "safety target" approach.